GemTek Technology WLTFSM13643 LTE B43 Cat 6 Single-Mode Indoor CPE User Manual

Gemtek Technology Co., Ltd. LTE B43 Cat 6 Single-Mode Indoor CPE

User Manual

Download: GemTek Technology WLTFSM13643 LTE B43 Cat 6 Single-Mode Indoor CPE User Manual
Mirror Download [FCC.gov]GemTek Technology WLTFSM13643 LTE B43 Cat 6 Single-Mode Indoor CPE User Manual
Document ID3319534
Application IDzNEZXe0j6vsDQPyBAF/08w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize54.45kB (680609 bits)
Date Submitted2017-03-16 00:00:00
Date Available2017-05-02 00:00:00
Creation Date2017-12-26 10:35:11
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-12-26 10:35:11
Document TitleUser Manual
Document CreatorMicrosoft® Office Word 2007
Document Author: emily_ku

WLTFSM-136ACN
Quick installation Guide
LED Indicators
LED Indication
1 Power
Status
Description
ON
Power ON
OFF
Power OFF
ON
Wi-Fi ON
OFF
Wi-Fi OFF
Flashing
Transmitting data
ON
VoIP ON
OFF
VoIP OFF
2 WiFi status
3 VoIP Status
Display signal strength
1 LED: 5dB < CINR < 10dB
ON
2 LED: 10dB < CINR < 18dB
Signal
Strength
3 LED: 18dB < SINR
OFF
SINR < 5dB
Flashing
Scanning Base Station
Firmware
All LED
Upgrade
Flashing
Connectors
Connector
Description
Power
(DC-12V Port)
The power port is where you connect the
enclosed power adapter.
Power On/Off
Switch
The on/off switch support to turn off device
WPS
Holds down the button for 5 seconds to WPS
enable
Reset
Holds down the button for 5-seconds to
factory defaults.
LAN – RJ -45
The LAN port allows you to connect Modem to
your PC or Hub using a Cat.5/6 Ethernet
network cable.
USB Type A Host
Support USB 2.0 Host
Voice– RJ-11
The voice port allows you to connect your
Phone to this Modem
Antenna
Connector
Support external Antenna with SMA
Connectors
USIM Slot
Support 2FF size ; 1.8V/3.3V USIM for LTE
Mode
Installation
Please follow the steps below to install the device:
Step1: Connect the device LAN port to your PC with a RJ-45 Ethernet
cable that is supplied.
Step2: Insert SIM card into the device with right direction.
Step3: Insert the power cord into the LTE Indoor CPE's DC-12V
power jack; and insert the plug into power outlet.
Step4: Switch ON the power. The device will start the booting
process. After a few seconds, the LED lights will start blinking.
Easy Setup
Please follow the steps below to configure your device through the
web interface:
Step1:
Open the Web browser (Internet Explorer) and enter the
default IP address of the IDU CPE : http://192.168.15.1
Step2:
Enter username/password to access the web management
interface.
http://192.168.15.1
Username : administrator
Password : administrator
The page displays in your browser after login; you can simply
configure the device settings.
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive
1999/519/EC. The following test methods have been applied in order to prove
presumption of conformity with the essential requirements of the R&TTE
Directive 1999/519/EC:
EN 301 908-1 V7.1.1
EN 301 908-13 V6.2.1
EN 300 328 V1.9.1
EN 301 893 V1.8.1
EN 62311:2008
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
EN 301 489-24 V1.5.1
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
In Italy the end-user should apply for a license at the national spectrum
authorities in order to obtain authorization to use the device for setting up
outdoor radio links and/or for supplying public access to telecommunications
and/or network services.
0560
Česky
[Czech]
Dansk
[Danish]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr
[udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante
krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme
tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, [name of manufacturer], declares that this [type of equipment] is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente [nombre del fabricante] declara que el [clase de
equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
ƴǙǙηνǗǘή
[Greek]
ƻƴ ǂΗƼ ƿΑǀƾǃǁΑ [name of manufacturer] ƳΗƺΩƼƴƸ ƾǂƸ [type of equipment]
ǁǃƻƻƾǀDŽΩƼƴǂΑƸ ƿǀƾǁ ǂƸǁ ƾǃǁƸΩƳƴƸǁ ΑƿΑƸǂΗǁƴƸǁ ƹΑƸ ǂƸǁ ƺƾƸƿƴǁ ǁDžƴǂƸƹƴǁ
ƳƸΑǂΑƽƴƸǁ ǂΗǁ ƾƳΗƲƸΑǁ 1999/5/ƴƹ.
Français
[French]
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est
conforme aux exigences essentielles et aux autres dispositions pertinentes de la
directive 1999/5/CE.
Italiano
[Italian]
Con la presente [nome del costruttore] dichiara che questo [tipo di
apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of
equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un
citiem ar to saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in
Nederlands
overeenstemming is met de essentiële eisen en de andere relevante
[Dutch]
bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott]
jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm
fid-Dirrettiva 1999/5/EC.
Magyar
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó
[Hungarian]
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski
[Polish]
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z
zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Português [Nome do fabricante] declara que este [tipo de equipamento] está conforme
[Portuguese
com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami
in ostalimi relevantnimi določili direktive 1999/5/ES.
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky
a všetky príslušné ustanovenia Smernice 1999/5/ES.
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen
[Finnish]
tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
10
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the
US/CANADA
Operation of this device is restricted to indoor use only.
11

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:fb7d8879-9f01-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:12 09:35:25Z
Create Date                     : 2017:07:12 09:35:25Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:fb7d8879-9f01-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MXF-WLTFSM13643

Navigation menu