Contents
- 1. Manual
- 2. Manual extract
Manual
1/7 ..FCC ID: MES300GEL
February 2002
GemEasyLink/Access
3xx
User's Guide
Version 1.0
2/7
© GEMPLUS
Regulatory Information
Notice for the USA: FCC Statement
Federal Communications Commission (FCC) Radio Frequency
Interference Statement (USA Only)
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protections against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try one of more of the
following measures:
à Relocate the radio or television antenna.
à Plug the equipment away from the radio or television.
à Plug the equipment into a different electrical outlet, so that the equipment
and the radio or television are on separate electrical circuits.
à Make sure that all your peripheral devices ar also FCC Class B
certified.
à Make sure you use only shielded cables to connect peripheral devices
to your equipment.
à Consult your equipment dealer, or an experienced radio / television
technician for help.
WARNING: The system verification tests were conducted with
GEMPLUS supported peripheral devices and GEMPLUS shielded cables,
such as those you received with your system. Cables used with this
equipment must be properly shielded to comply with the requirements of
the FCC.
Changes or modifications not expressly approved by GEMPLUS could
void the user's authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions :
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
3/7
© GEMPLUS
GEMEASYLINK/ACCESS3XX USER'S GUIDE
The GemEasyLink/Access3xx device is a contactless proximity card reader combining
both the reader and the antenna in one small package. Its main application is access
control.
The unit utilizes the MIFARE® technology as part of its integrated solution.
The device also provides both audio and visual feedback with an internal beeper and
LED indicators.
The GemEasyLink/Access3xx device is available in a rugged IP65 rated enclosure for
direct mounting (GemEasyAccess3xx) or as an OEM version (GemEasyLink3xx) for
packaging in a user supplied environment.
The main features of the GemEasyLink/Access3xx device are:
• Versatile package with easy connection allowing the card reader to be included
in equipment mounted indoors or outdoors and on a variety of surfaces,
• Front mounted multicolor LED and beeper indicate status and error information,
• Standard input / output.
This user's guide includes information on the operation of GemEasyLink/Access3xx
device.
A typical application is depicted in figure 1:
Figure 1: GemEasyLink/Access3xx typical application
General
overview
Host controller or
Control Panel
GemEasyLink/Access3xx
Reader
Contactless Smart
Card
Standard
Interface
4/7
© GEMPLUS
The packaged device is composed of a small package including a reader and an
antenna:
Front side: A blue LED indicator and a bicolor LED indicator,
Rear side: User cable for connection and adhesive fixing.
Figure 2: GemEasyAccess3xx Mounting and Indicator Reference
The cable is dedicated to the user connection.
The adhesive is used to fix the device to a wall.
The blue indicator is related to device activity.
The bicolor indicator is related to access control activity.
An internal beeper is used as audio indicator.
GemEasyAccess3xx
Overview
Blue
Indicator
Bicolor
Indicator
Connection
cable
Adhesive
fixing
5/7
© GEMPLUS
The OEM device is composed of two assembled boards (Antenna & Reader) with the
following user indicators and connectors:
Top side A blue indicator and a bicolor indicator,
Bottom side Four groups of terminal block connectors.
Figure 3: GemEasyLink3xx User Interface Component Locations
The terminal blocks are dedicated to user connections.
The blue indicator is related to device activity.
The bicolor indicator is related to access control activity.
The internal beeper is used as audio indicator.
GemEasyLink3xx
Overview
Bicolor
indicator
Green/Red
Blue
indicator
Beeper
(under
J3
J1
J4
J2
Brass
Spacers x
Antenna
Top side Reader
Bottom side
6/7
© GEMPLUS
The GemEasyLink/Access3xx device offers the following features:
• Up to date architecture,
• The ability to communicate with any type of ISO14443A contactless smart card,
• The ability to transmit smart card secured information,
• Standard +12 V operation,
• A friendly user interface with three LEDs and a beeper,
• Built-in tamper switch.
The GemEasyLink/Access3xx device provides and requires the following conditions
for optimal operation.
Operating Temperature range -20°C to +70°C (-4°F to 158°F)
Humidity Range 0% to 95% non condensing
Index of protection IP00 (open case reader) / IP65 (packaged reader)
Physical dimensions
82 mm (Height) x 40 mm (Width) x 22 mm (Deep)
for open case reader
88 mm (Height) x 46 mm (Width) x 19 mm (Deep)
for packaged reader
Cable AWG24 wire
Power Supply Voltage +12 V (+8 V to +13 V)
Power Supply Current < 150 mA for +12 V power supply voltage.
Table 1: GemEasyLink/Access3xx Technical Specifications
Product features
Technical
Specifications
7/7
© GEMPLUS
An example of wiring diagram is depicted in Figure 4:
In this example, when the door is required to open, the green indicator and the beeper
are activated.
Figure 4: Example Wiring Diagram
Wiring diagram
Door strike
+
-
To controller
+12V
GROUND
Reader DATA0
Reader DATA1
Door Open
Tamper input
Tamper input
Connect the cable shield to earth
Add Ferrite
WURTH reference 7442 712 22 or 742 7007
on the cable at 45 cm from the device
Signal
+12V
GND
DATA0
DATA1
GND
BEEP
RLED
GLED
TAMP1
TAMP2
wire
Red
Black
Green
White
Blue
Red/Black
Green/Black
Orange/Black
Orange
White/Black
Shield
Pin
J1-1
J1-2
J2-1
J2-2
J2-3
J4-1
J4-2
J4-3
J3-1
J3-2
ii WARNING ii
WURTH reference 742 712 22 or 742 7007