Gemel Italia S p A RXC-SSR User Manual 33581
Gemel Italia S.p.A. 33581
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 33581 |
| Application ID | SN1L9r1uTSIInIL2dokafA== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 9.59kB (119921 bits) |
| Date Submitted | 1999-04-21 00:00:00 |
| Date Available | 1999-05-10 00:00:00 |
| Creation Date | 2001-06-27 10:31:23 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-06-27 10:31:28 |
| Document Title | 33581.pdf |
| Document Author: | VicodinES /CB /TNN |
e xawl’e of use ANNE-511935 For every arming cycle. the alarms are limited h a maximum umber 01: 5 Interventions due to eadt oi the (allowing causes: - saddle prutecllnn (PS) - saddlebag protection (PE) - stand protection (PC) - ignition attempt (T A] ~ voltage drop, when alarm is armed (CA) 3 interyefrtions'lor: - position oentrel sermrtsP) (optional) AMEND-3595 Alter disarming the alarm. the LED wnl flash a number at times indicating that one or more acoustic alarms have occurred during your absence. To identity the alarm cause refer to both this table and the abbreviations in the previous section, The alarm wr1 store these signals until eilhertha ignition is turned on or the alarm is rearrnad. ' AHIQEEEE The alarm has internal batteries and sounds It the battery wires are out or disconnected. When the battery is reconnected. the sound will stop within 30 seconds atter being connected. The euleleed cycle Is 30 seconds on and in seconds oil. which is repeated lot 5 minutes. In autoieed mode. which is only activated when the alarm is armed. the direction indicators do not work. During the arming period (the first is seconds). any lack oi voltage is Indicated by the buzzer repeatedly giving all a mono-tone sound until it runs down. alter whlah the alarm win give oil e Me- lons sound. WEE-[Mm Automatic amling means that the motorcycle is protected even when the user iorgee to arm the alarm. This is required by a number oi Hemologat’on bodies. and it Is possible to arm and disarm using a remote—control. These tail into Me oetegeries- passive engine lrnmoblllsatlon — passive engine lmrnotrillsation and alarm system. _(K connected and enabled by programming) Alter having removed the ignition key, engine lmmdbilisalion occws automatically alter 15 seconds, so preventing any lllioit attempt at starting up the engine. By way 0! oonfirmatlon that the alarm is armed there will be: ~ one llash oi the direction Indioetors ~ the buzzer will sound once - the LED light will come on. . To'disarm the alarm touch the LED reader with the lip oi the electronic key or press button A on the remote control twice or. ins-n the ignition key and touch the LED reader with the lip of the electronic key or press Button A on the remote control. WWW (it enabled by programming) After having removed the ignition key. anfine lmrmbiusetinrr occurs automan‘eally after 15 seconds. By way at confirmation that the alarm has been armed there will be: - one ilash oi the direction Indicators - the buzzer will sound once a - the LED light will go out. Fag. 9 Anarehmer 15 seconds. the alerrn will be enned which will be confirmed by: . two flashes oi the direcflen indicators - two somds oi the buzzer. . At this stage the engine Mobilisation and alarm system are armed, anar a lurther 15 seconds the alarm wll be operative and the LED light will startle (lash. To disarm. touch the LED reader with the tip oi the electronic key of press button A on the remote-control. Passive arming Is a Iunction which Is required by the homologatlen bodies In various European countries. it is possible however to exclude,.iorlust one cycle, the automatic alarm arming lumtion in accordance with personal requirements. To disable the passive arming follow this procedure: - Remove the ignition key within 10 seconds making the yellow wire negative. - Arm and disarm the eiarrn using the electronic key. Automaiio arming will be restored the next lime the alarm is err-nod using the electronic key or remote- oontrol, or alter having burned the ignition key irom ON to OFFl ' N.B. Engine immobnisetion however. will be armed after 15 seconds. Note: WITH MOTORCYCLES THAT HAVE A FOSI110N "H” ON THE IGNITION. IT IS SUFFICIENT TO LEAVE THE KEY IN THAT POSTI'ION TO PREVENT AUTOMA‘HC ARMING. Wm Press button (A). Confirmation that the alarm has been armed will be Indicated by: - two flashes oi the direction indicators; - two sounds of the buzzer - the LED light will come on (alter 15 seconds). N.B. The acoustic alarm will be operative 15 seconds alter the alarm is armed. during which time. it the alarm is ac’dveted tor any reason, the buzzerwlil sound once. To disarm the alarm, press button (A). Confirmation that the alarm has been dreamed will be indicated by: ~ - one iiesh oi the direction indicators: - one sound of the buzzer ~ihe LED Ilghlwillgooul. MIAMI-ABM (acoustic alarm only) This Iunction Is activated tor to seconds by pressing button (B) 15 seconds afler arming or disarming the alarm. It can be deactivated by pressing button (B) once again without altering the condition at the alarm. WWW-QM in accordance with current reguladons or where parking motorcycles within hotel or hocptnl grounds or where transporting said rnotercydes by ferry, It is possible to arm the alarm and exclude the siren. To activate this iunclion (allow this procedure: - With the ignition on, press button (A) on the remomontroi tor about 2 seconds (the LED will llaeh once). - Turn oil the ignifion within 10 seconds (alter which the tunction will not be stored]. Atthls stage, alter arming. the siren wfll be excluded lot the entire ON cycle. On disarming the alarm. in- Iunction will be automaumity restored. Peg. 10 - item it is possible to discomed the siren lunction without clean-ring the alarm. To do so. press button (B). This iunction does not alter the condition 01 the alarm. in case oi loss of the trenemlaer It Is possible to disamt the alarm by using the stored electronic key. ' WW To exclude the position control sensor iotlow this procedure: - arm the alarm, during which time (the ilrst 15 seconds) press button (5) on the remote-control. - Confirmation that me exclusion has occurred will be indicated by. ~ 3 flashes oi the direction lndlutors: ' it sounds oi the buzzer; 4 3 flashes oi the LED light. The last the battery is law may be Indicain In Me ways. - an disarming the alarm, Instead of the normal buzzer lrnpuises, they wil be less acute. _ - the LED on the remota~controt will onty light up lore split second (20 mess), alter which it will not light up again even it you go on pressing. , - > ' When the battery is dead do not treat It as normal waste, but dispose oi It in the special containers. It is Important lhat you replace the battery In close prosdmlty to the motorcycle. When replac'ng It, remove the screws on the back and separate the two hahes oi me case. Take out the dead battery and replace It with a new one. When replacing batteries. lhe CR 2032 all model is advisable (coda 222120050). - Remove the screws on the back and the separate the two halves of the case. - When putting the new battery in place, make sure that the battery does NOT come Into contact with any at the remotecontroi‘s electrical components. When you have replaced the battery. the LED on the remote-control will light up. Cany out the tesynchronlsatlcn procedure (see relevant paragraph). W ‘ II the remote-control button ls pressed for more than 756 time consewtlvely out oi the alarm‘s mmdmum capacity range. It will be necessary to carry out the resynd'tronlsabon procedure. ~ press buttons (A) and (B) atthe some time until the LED light goes out (approximately 10 seconds): - release them and check to see the! the LED light has come on and stays on; ~ finally. press any button within the range oi the alarm. You remote-control should now be resynchronlsed with your alarm ‘ WWW - Arming time 15 seconds - Alarm time 30 seconds - Manning time between one alarm and another 5 seconds - Working temperature ~40'c 4 we - Average remotemntrol transmission distance 10 metres - Transmitter range > 25 Khz (wide ham) AME - Parflcular attention must taken when washing the motorcycle. In such cases. protecting the alarm trorn any direct waters Jets ls advisable. - Do not molect the remote-control to any excessive sources at heat, water or knocks. - Installation and electrical connections must be carried out In accordance with the Instuctlcns supplied by the manuiacturer: furthermore, calling In an Installer or prolesslonal Is advisable to: assembling the alarm Fag. 11 - It 13. recommended that a complain check is carried cut on the IruIaiIaflon by a professional lnmnar. IMPORTANT in case of loss of one of rm two electrcnlc keys, ask your Installer Io make a copy straightaway. The less oi both keys would result In It being Impossible lo “II-learn any new ones and, as a consequence. complain system repIacemeni. CAUTION The alarm only unis as a deterrent against any possible Iheii. In no way can II he considered as Insurance again“ man. The manufacturer accepts no responsibnhy for any damage or opereilng anomalies el the alarm. Iha accessories or me vehicle's electric system caused by lncorr-cr Installation a/a any excess In lm natures spacliled in the Insiallafion cerfificehe. GEMEL IT AUA s.pA reserves rm rlght in make any modificailons wherever necessary without giving prior malice This device complies with Part 15 of the FCC Rules. _ Operation is subject to the following two conditions: ( 1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that tiny cause undesired operation. Pen. 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:06:27 10:31:23 Producer : Acrobat Distiller 4.0 for Windows Author : VicodinES /CB /TNN Title : 33581.pdf Modify Date : 2001:06:27 10:31:28-04:00 Page Count : 4EXIF Metadata provided by EXIF.tools