Generac 1674 0 User Manual PRESSURE WASHER Manuals And Guides L0505107

GENERAC Power Washer, Gas Manual L0505107 GENERAC Power Washer, Gas Owner's Manual, GENERAC Power Washer, Gas installation guides

User Manual: Generac 1674-0 1674-0 GENERAC PRESSURE WASHER - Manuals and Guides View the owners manual for your GENERAC PRESSURE WASHER #16740. Home:Lawn & Garden Parts:Generac Parts:Generac PRESSURE WASHER Manual

Open the PDF directly: View PDF .
Page Count: 36

Download
Open PDF In Browser	View PDF

anuaJ
Questions?
Call: Generac

Pressure

Help
Washer

is just a moment
Heipiine

VVeb:wwwogenerac-portabiesocorn
Model No. 1674o0 (2_300 PSI Pressure Washer)

away!

= 1=800=270=1408

M=F 8=5 CT

or www.briggsandstratton.com
Manual No. 190134G8

Revision 4 (08/14/2002)

b
Y_&_

$_ra_on'

powE__opucT_

TABLE
Safety
Know

OF CONTENTS

Rules ..................................
Your Pressure
_A/asher

AssembHy

WARNING
2°3
4

......................

....................................

Operation

S-7

..................................

8-HH

Product
Specifications
...........................
Maintenance
...............................
Storage

HH
H2-H 4

......................................

TroubHeshooting
RepHacement
_A/ar ranty

...............................
Parts

Turn pressure

...........................

before

H6- H9

...............................

ADDING

WNEN

FUEL
washer

removing

OFF and let it cool at least 2 minutes

gas cap.

Fill fuel tank outdoors.

Last Page

Do not overfill

EQUmPNENT

Keep gasoline
and other

tank.Allow
away from

ignition

with

this

manuam

carefummy

your

pressure

washer.

mimitations

and

any

Every effort

has been

this manuaH

is accurate
right

and
Know

hazards
made

the

product

and this document

to change,

to ensure

alter

its

famimiar

appmications,

VNEN

its

OPERATING

pilot lights, heat,

or smoke.
EQUIPMENT

invomved.

and current.

reserves

become

for fuel expansion.
open flames,

sources.

Do not light a cigarette
Read

space
sparks,

that

information

However,
or otherwise

at any time

without

Generac
improve
prior

the

notice.

FUEL

iN TANK

Store away from furnaces, stoves, water heaters, clothes
dryers or other appliances that have pilot light or other
ignition source because they can ignite gasoline vapors.

WARNING

SAFETY

RULES
Keep water spray away from
shock may result.

The safety aHert symbol (_) is used with a signaH word
(DANGER, CAUTION,WARNING),
a pictorial and/or a
safety message to aHert you to hazards. DANGER
indicates
a hazard which, if not avoided, wil/resuHt in death or serious

electric

wiring

or fatal electric

WARNING

iniury. WARNING
indicates a hazard which, if not
avoided, could resuHt in death or serious iniury. CAUTION
indicates a hazard which, if not avoided, might resuHt in
minor or moderate
iniury. CAUTION,
when used
without
the aHert symbol indicates a situation that couHd
resuHt in equipment
damage. Follow safety messages to
avoid or reduce the risk of iniury or death.

Never

aim the spray gun at people,

Do not allow CHHLDREN
Never

to operate

animals

or plants.

the pressure

repair high pressure hose. Replace it.

washer:

bye&

S_on

WARNING

Do not wear
caught

loose

clothing,

in the starter

or other

Tie up long hair and remove
Keep spray nozzle between
surface.
Be extremely

POV/ER
p_D_JC
rS

iewe]ry

or anything

rotating

that may be

parts_

iewelr_;

8 to 24 inches away from cleaning

careful if you must use the pressure washer from

a ladder, scaffolding or any other

relatively

WARNING

unstable location.

The cleaning area should have adequate slopes and drainage to
reduce the possibility
Operate

of a fail due to slippery surfaces.

this unit on a stable surface.
Always wear eye protection
when

Disconnect
pressure

washer

ONLY outdoors.

Use a respirator
or mask whenever
vapors may be inhaled.
Read all instructions
provide

there

protection

Do not touch

Allow equipment

is a chance

is in use.

plug wire from the spark plug and place

it cannot

contact

spark

plug.

CAUTION

Do not tamper

with governed

Do not operate

the pressure

speed.
washer

above the rated

pressure.

1
Do not point spray gun at glass when in the iet spray mode.

hot surfaces.
to cool before

the equipment

that

against inhaling harmful vapors.

WARNING

the spark

the wire where

with mask so you are certain the mask will

the necessary

you use this equipment

WARNING

DANGER

Operate

when

you are in the vicinity where

Never aim the spray gun at plants.

touching.

b
Y_&_

$_ra_on'

powE_P_ODUCTS

KNOWYOUR
Read

this

owner's

Compare

the

adjustments.

PRESSURE WASHER

manuaJ

ilhstradons
Save this

with

manual

and

safety

your

rules

pressure

for future

before

washer

operating
to familiarize

your

pressure

yourself

with

washer,

the locaqons

of various

controls

and

reference.

AccessoryTray
High Pressure Hose

Spray Gun
Recoil Starter

Throttle

Contr
Chemical Injection

Oil Fill/Dipstick
Air
VVater

Inlet

Choke Lever
High Pressure Outlet

/
Adjustable

Pump equipped with Automatic
Cool Down System

Nozzle

AccessoryTray
-- Provides convienant storage for
standard and optional accessories, such as brushes, turbo
wands, ect.

Choke

Adjustable
Nozzle
--Always
attached to nozzle
extension.Adjustable
nozzle allows you to adjust spray
pressure and spray pattern.

High Pressure
hose.

Air Filter -- Dry type filter element
dirt and dust that gets in the engine.

limits the amount

Lever --

Prepares

a cold engine for starting.

High Pressure Hose -- Connect one end to water
pump and the other end to spray gun.

Oil
of

Automatic
Cool Down System -- Cycles water
through pump when water reaches
125°° 155°PA/arm
water will discharge from pump onto ground.This
system
prevents internal pump damage.

Outlet

FiJJ/DipsticJ< --

-- Connection

for high pressure

Check and fill with oil here.

Pump

-- Develops high pressure.

Recoil

Starter

-- Used for starting the engine manually.

Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Throttle
Control
Lever -- Sets engine in starting
for recoil starter and stops a running engine.

Chemical
injection
Siphon/Filter
-- Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.

Water

inlet

-- Connection

for garden

hose.

mode

bye&

S_on

PREPARING
WASHER

iMPORTANT:
Read entire owner's manuaH before you
attempt to assembie or operate your new pressure washer.

REMOVE
PRESSURE
WASHER
FROM
o Remove
with

the parts

pressure

o Siice two

bag, accessories,

so the

remove

ali packing

o Roli pressure

and insert

To prepare
your pressure washer
wi[[ need to perform
these tasks:

inciuded

o Fiil out and send in registration

at the end of carton

bottom

panei

can be foided

from

down

top

flaL then

out

Items

high pressure hose to spray gun and pump.

o Connect water

supply to pump.

include:

Attach

Hain Unit

Handle

and Accessory

Tray

NOTE: AHHassembiy operations given in this section wiHHbe
described from the perspective of assembling the pressure
washer from the rear.

Goggies
Handie
Piastic Accessory Tray
High Pressure

o Slide the plastic accessory
the holes in the accessory
handle (Figure I).

Hose

Spray Gun
Nozzie

card.

o Add fuel to fuel tank.

of carton.

Contents

in the carton

you

o Add oi[ to engine crankcase.

material

washer

for operation,

o Attach accessory tray to handie_ then attach handle to
main unit.

o Connect

Carton

PRESSURE
FOR USE

If you have any problems with the assembly of your
pressure washer or if parts are missing or damage& cail the
pressure washer heipiine at [ -800-270- [ 408.

washer.

corners

POWER
p_r_UCrs

tray onto the handle and align
tray with the holes on the

Extension

Oil Bottle
Parts Bag (which inchdes the following):
Owner's

Planual

Engine Planual
Owner's

Registration

Card

Plaintenance Kit
Handle Fastening Hardware
Carriage

Kit (which includes):

Bolts (2)

Plastic Knobs

(2)

"J" Hook
Chemical Hose Clip
Self Tapping Screws

(5)

ff any of the above parts are missing or damage& cail the
pressure washer heipiine at 1-800-270-[
408.

o Secure tray to handle with self tapping screws using a
#2 phillips screwdriver.
Ensure screws are tight but not
crushing the plastic accessory tray.

b
Y_&_
_

$_ra_on'
powE_e_ODUCT_

* Phce the hande onto the hande supports aHready
connected
to the main unit. Make sure the holes in the
hande aHign with the holies on the hande
(Figure 2).

supports

* Tilt the
the rib
(Figure
so that

unit up by the handle and attach the metal clip to
on the left underside of the accessory tray
6). Slide the chemical hose through the metal clip
it is tight but not kinked.

NOTE: It may be necessary to move the handHe supports
from side to side in order to aHign the hande so it will sHide
over the handHe supports.
° Insert the carriage boHt through the holies from the
outside of the unit and attach a phstic knob from the
inside of the unit.Tighten
by hand (Figure 3).

Add
G

Engine

JNPORTANT:

Oil
Any attempt

to crank or start the engine

before it has been properly serviced with the
recommended
oil may result in an engine failure.
* Place pressure
, insert the "J" hook into the second
the accessory tray (Figure 4).

from the left slot in

washer

on a [eve[ surface.

° Refer to the engine owners
oil to engine.

manual to add recommended

NOTE: Check oil often during engine break-in.
engine owner's manual for recommendations.

Add

Refer to

Gasoline
WARNING!
fi[[ fuel

tank

smoke

when

Never
when

engine

fill fuel

tank

is running

indoors.
or hot.

Never
Do

Not

filling fuel tank.

* Pinch the chemical

hose that comes

WARNING!
Never fill fuel tank completely full.
Provide space for fuel expansion.Wipe
away any fuel
spillage from engine and equipment
before starting.

out of a hole in the

unit's base and slide it into the metal clip_ as shown
Figure 5.

bye&

S_on
_7_

° Use fresh_ dean unHeaded automotive gasohne and store in
approved, dean, covered containers. Use dean fill funneHs.
Never
use "staHe" gasoHine Heft over from Hast season or
gasoHine stored for Hong periods.
° CHean area around

fueH fill cap, remove

POV/ER
_r>UCrs

° Before you connect your garden hose to the water inlet,
inspect the inlet screen (Figure I 0). Clean the screen if it
contains debris, replace it if it is damaged. DO NOT RUN
THE PRESSUREWASHEP_ IFTHE SCREEN IS DAMAGED.

cap.
Inspect inlet
screen. Do Not

° SHowilyadd "UNLEADED" reguhr gasoHine to fueH tank.
Use a funneH to prevent spillage. SHowilyfill tank to about
H.5'_ bellow the bottom of the filler neck (Figure 7).

use if damaged;
clean if dirty.

° Run water through the garden hose for 30 seconds
clean out any debris.Turn
off water.

° Install fuel cap and wipe up any spilled gasoline.

mMPORTANT:
Do Not siphon standing water for the
water supply. Use ONLY cold water (less than 100°F).

Connect

° Connect the garden
hand (Figure 10).

Hose

and Water

Supply

CAUT|ON!There
mMPORTANT:You
the engine. Starting
water

must attach all hoses before you start
engine without all hoses connected
and

supplied will damage

hose to the water

HUST

inlet.Tighten

be at least ten feet of

unrestricted
garden hose between the pressure washer
inlet and any flow shut off device, such as a 'Y' shut-off
connector
or other convenience-type
water shut-off valve.
Damage to pressure washer resulting from disregarding this
caution will not be covered by the warranty.

the pump.

° Attach one end of the high pressure hose to the high
pressure outlet on the pump (Figure 8).Tighten
by hand.

° Turn ON the water and squeeze the trigger on the spray
gun to purge the pump system of air and impurities.
CAUTION!

Before starting

be sure you are wearing

Checklist
, Attach

the other

spray gun (Figure 9).Tighten

by hand.

Hake sure the handle

adequate

Starting

Before

Review the unit's assembly
all of the following;

end of the hose to the base of the

the pressure

to confirm

eye protection.

Engine
you have performed

is in place and secure.

, Check that oil has been added to the proper
engine crankcase.
, Add the proper
, Check

Connect High
Pressure Hose
Here

gasoline

for properly

washer,

level in the

to fuel tank.

tightened

hose connections.

, Check to make sure that there are no kinks, cuts, or
damage to the high pressure hose.

Provide

Be sure to read "Safety Rules" and "HowTo
Pressure Washer" before using the pressure

a proper

water

supply at an adequate

flow.
Use Your
washer.

b
Y_&_
_

$_ra_on'
powE__ODUCT_

NOWTO
USEYOUR
PRESSURE WASHER
If you have any problems operating your pressure washer,
please call the pressure washer heIpline at
I=800=270=1408.

To Start

o Hove the throttle lever to "Fast"
as a rabbit (Figure 13).

You r Pressu re Washer

position, shown here

To start your pressure washer for the first time_ follow these
instructions step=by=step.This starting information also applies if
you have let the pressure washer sit idle for at least a day.
. Place the pressure washer in an area close enough to an
outside water source capable of supplying water at a flow
rate greater than 2.2 gallons per minute.
Throttl

. Check that the high pressure hose is tightly connected to
the spray gun and to the pump. See "Preparing Pressure
Washer For Use" for illustrations.

Choke Lever

o Hake sure unit is in a level position.

o Hove the choke lever to the "Choke"
(Figure 13).

position

° Connect the garden hose to the water inlet on the
pressure washer pump. Turn ON the water.

NOTE: For a warm engine, be sure the choke lever is in
the "P_un" position.

CAUTION!
Do Not run the pump without the water
supply connected and turned on.You must follow this
caution or the pump will be damage&

o Place your left foot on the lower frame and grasp the
handle as shown (Figure 14).Your unit may appear slightly
different from that shown here.

° Squeeze trigger on gun until you have a steady stream of
water.This purges the pump of air and impurities.
. Attach nozzle extension to spray gun (Figure I I).Tighten
by hand.

o Position the nozzle in the low pressure mode (slide
nozzle forward) and squeeze the trigger on the spray gun
to relieve pressure caused by turning ON the water.
VVater will flow out of the gun in a thin stream. Continue
to hold trigger until there is a steady stream of water
and no air remains in the system. Release the trigger.
* Pull the starter grip handle lightly with your right hand
until you feel some resistance, then pull briskly.

° Engage the safety latch to the spray gun triger
(Figure 12).

bye&

S_on
_7

POWER
p_JC rs

° Return the startergriphandHe showily.
Do Not Herrope
"snap

bacH<" against

starter.

, VVhen engine starts, showily move choke Hever to the
"Run" position.
IfenginefaHters,
move choke Heverto the
"Choke"
position, then to the "Run" position.
° if engine faiHsto s_rt after six puHHs,
move choke Heverto
the "Run" position. If engine fires, but does not continue
to run, move choke Hever to the "Choke"
position, then
to the "Run"

position.
/

NOTE: If the recoiH starter is hard to puHLit may be necessary
to squeeze the gun triter
to reHieveinternaH pump pressure.

How

to StopYour

. Hove throtde

Pressure

Hever on engine to "Stop"

Hang your chemicaH soHution bottHe on the "J" hook and
pHacethe detergent siphoning fiHter in the Hastshot on the
Heft (Figure HS).

Washer
position.

. Squeeze trigger
on the spray gun to relieve
pressure in the hose_

° Hang the high pressure hose on the hook on the right
side of the accessory tray (Figure H5).

NOTE:A
smaHHamount of water wiHHsquirt out when you
reHeasethe pressure.

° PHacethe spray gun on the hook on the Heftside of the
accessory tray as shown on page 4.

How

to Use Accessory

"Tray

to Use the Adjustable

Nozzle

You now shouHd know how to START your pressure
washer and how to STOP it.The information in this

The unit is equipped with an accessory tray with pHacesto
store your nozzHe extension, and shots to hoHd the cHeaning
soHution bottHe and the detergent siphoning fiHter.There are
aHsotwo hooks at the ends of the accessory tray to hoHd
your spray gun and high pressure hose.

section wiHHteHHyou how to adiust the spray pattern and
appHy detergent or other cHeaning chemicaHs.

CAUTION!
Never adiust spray pattern when
spraying. Never put hands in front of nozzHeto
adiust spray pattern.

NOTE:The
extra holies in the tray are for storing a brush
and a turbo wand.The brush and turbo wand are NOT
incHuded with your pressure washer.You can buy these
items as optionaH accessories.

The adiustabHenozzHeaffixed to the nozzHeextension
permits you to adiust the spray pattern and the spray
pressure_as foHHows:

. PHacethe nozzHe extension through the hoHe on the
accessory tray, as shown in Figure H5.

b
Y_&_
_

$_ra_on'
powE_P_ODUCTS

° SHidethe nozzHe forward to adjust the spray to How
pressure mode (Figure H6).SHidethe nozzHe backward to
achieve high pressure.

° For most effective cHeaning, keep the spray nozzHe
between 8 to 24 inches away from cHeaning surface.
. If you get the spray nozzHe too chose, especiaHHy using high
pressure mode,you
may damage the surface being
cHeaned.
. Do Noe get cHoser than 8 inches when

Applying
Detergent
with
Adjustable
Nozzle

SHidenozzHe backward
for high pressure mode.

cHeaning tires.

the

CAUTION!
You must aeeach all hoses before you start
the engine. Starting the engine without all the hoses
connected and without the water turned ON wiHHdamage

SHidenozzHe forward for
How pressure mode and
detergent application.

the pump.
IMPORTANT:
Use soaps designed speci_cammy for
pressure
washers.
HousehoHd detergents
couHd damage
the pump.

° Point the nozzHe down towards a firm surface and press
the trigger to test the pattern (Figure H7).

To apply

deeergene,

* Review

the use of adjustabHe

* Prepare
detergent
manufacturer.
° Hang

the detergent

the accessory

soHution

tray, as shown

ehese

steps:

nozzHes.
as required

by the

on the "J" hook
in Figure

attached

H9.

° Twisting the nozzHe adjusts the spray pattern from a
narrow

pattern to a fan pattern (Figure H8).

° PHace the smaHHfiHter end of the detergent
into the detergent
container.

siphoning

tube

CAUTION!
Keep the detergent siphoning tube from
coming in contact with the hot muffler.

Twist nozzHe
countercHockwise for fan
spray pattern,

. SHidethe adjustable nozzle forward to How pressure
mode. Detergent cannot be appHied with the nozzle in
high pressure position.

Twist nozzHe cHockwise
for narrow spray
pattern.

bye&
_

, Hake sure the garden hose is connected
to the water
inHet. Check that the hgh pressure hose is connected to
the spray gun and the pump. Start the engine.

" AppHy a high pressure spray to a smaHHarea, then check
the surface for damage. If no damage is found, it is okay
to continue rinsing.
° Start at the top of the area to be rinsed, working down
with same overHapping strokes as you used for cHeaning.

° AHHowthe detergent to "soak in" for 3-5 minutes before
washing and rinsing. ReappHyas needed to prevent
allow the detergent

Washer

Cool Down System

Automatic

to dry

(Thermam

mMPORTANT:You
must flush the chemicaH injection
system after each use by pHacingthe fiHter into a bucket of
dean water, then run the pressure washer in How pressure
for H=2minutes.

Pressure

, Keep the spray gun a safe distance from the area you
pHan to spray.

° AppHy the detergent to a dry surface, starting at lower
portion of area to be washed and work upward, using
Hong,even, overlapping strokes.

surface from drying. Do Not
on (prevents streaHdng).

S_on

POWER
p_UC rs

Remief}

If you run the engine on your pressure washer for
3=5 minutes without pressing the trigger on the spray gun,
circuHating water in the pump can reach a temperature
between H25°-H 55°EWhen the water reaches this
temperature, the automatic cool down system engages and
cooHs the pump by discharging
the warm water
onto
the ground.
This system prevents internaH damage to the
pump.

Rinsing

WARNING!
Be extremeHy carefuH if you must
use the pressure washer from a Hadder,scaffoHding
or any other relatively unstabHe Hocation. Pressure in
a running washer buiHds as you cHimb.When you
press the trigger, the recoiH from the initiaH spray
couHd cause you to fall.The high pressure spray
couHd aHso cause you to fall if you are too chose to
the cHeaning surface.

SPECRFRCATRONS
Rated

Pressure

.....

Flow Rate

..........

2.0 gaHHonsper minute

Detergent

..........

Use detergent approved for
pressure washers

For Rinsing:
Water

, SHidethe nozzHe backward to high pressure and press the
trigger. It wiHHtake a few seconds for the detergent to
clear.
NOTE:You
can aHso stop detergent from flowing by simpHy
removing detergent siphon tube from botde.

2,300 psi

SupplyTemp

. Not to exceed

H00°F

Automatic
Cool
....
Down System
.......

VViHHcycHewhen water
reaches H25 °° H55°F

Shipping

77 Hbs.

Weight

....

(gpm)

b
Y_&_

S_ra_on'

powE__opucT_

GENERAL
MAmNTENANCE
RECOMMENDATmONS

CAUT|ON!
Water spraying from a Heakis capabHe
of injecting materiaH into skin. Inspect hose each
time before using it. Never repair a high pressure
hose. RepHaceit with another hose that exceeds the
maximum pressure rating of your pressure washer.

The pressure washer warranty does not cover items that have
been subjected to operator abuse or neghgence.To receive full
value from the warranty, the operator must maintain the
pressure washer as instructed in this manual
° Some adjustments wiHHneed to be made periodicaHHyto
properHy maintain your pressure washer. Check the spray
gun and adjustable nozzHeextension assembHyfor wear.

Check

Examine the
dogged.The
Examine the
tube if either

° AHHmaintenance in this manuaHand the engine owner's
manuaH shouHd be made at Heastonce each season.
o Once a year you shouHd dean or replace the spark pHug,
dean or replace the air fiker.A new spark pHugand dean
air fiHter assure proper fueHoairmixture and heHpyour
engine run better and Hastlonger. PHeaserefer to your
engine owner's manuaHfor more details.

BEFORE

EACH

Detergent

Siphoning Tube

fiHter on the detergent tube and dean if
tube shouHd fit tightHy on the barbed fitting.
tube for Heaksor tears. RepHacethe finer or
is damaged.

C[ean[n_ent

S[phoninS:Tube

if you used the detergent siphoning robe,you must flush it
with dean water before stopping the engine.
° PHacethe chemicaH injection siphon/fiNer
of dean water.
° SHidethe adiustabHe nozzHe extension
pressure mode.

USE

in a bucket fuHH

forward

to the How

° Check engineoiHHeveL

° Rush for Ho2 minutes.

° Check water inHet screen for damage.

° Shut off the engine.

, Check in4ine finer for damage.

IMPORTANT:
SimpHy shutting OFF engine wiHHnot
reHeasepressure in the system, When the engine has
shut down, squeeze the trigger
on the spray gun to
relieve the pressure in the hose,

, Check high pressure hose for Heaks.
, Check detergent

siphoning tube and finer for damage.

, Check spray gun and adjustabHe nozzHe extension
assembHy for Heaks.

Check

, Rinse out garden hose to flush out debris before
connecting to pressurewasher.

PRESSURE

Check

and

Clean

Inlet

the safety Hatch in the ON position and test the trigger, You
shouHd not be abHeto press the trigger,

Screen

Check

Examine the screen on the water inHet. CHean it if the

High

Pressure

in-Line

F[Ker

Referto Figure20 and servicethe inoHine
fiHter
ifit
becomes dogged,as foHHows:

screen is dogged or repHace it if screen is damaged.

Check

and Adjustable Nozzle

Examine the hose connection to the spray gun and make
sure it is secure,Test the trigger by pressing it and making
sure it "springs bacH<"into pHacewhen you reHeaseit, Put

WASHER

MAmNTENANCE

Gun

Hose

The high pressure hose can deveHop Heaksfrom wear,
kinking, or abuse. Inspect the hose each time before using
it. Check for cuts, Heaks,abrasions or buHging of cover.
damage or movement of coupHings. If any of these
conditions exist, repHace the hose immediately.

NozzHe Extension
Oorir

bye&

S_on

Detach

spray gun and nozzHe extension

pressure

hose. Detach

and remove

o:fing

and screen

nozzHe extension.

etc.To

or restricted
correct

the

with

pump

pressure

foreign

materiak

problem,

immediately

If the screen

is damaged_ the o:fing

and

repHacement

inoHine fiker
reuse

screen

the nozzHe extension.

Direction

in with

Purge

into

Pressure
turn

o When
the

recess.

the

VVasher

matter.

Push

trigger

Dump,

washer

the

water

the

Push the o°ring

to the

these

Connect

steps:

in "Preparing

(5/64)

from

end

of the

the

from

to the

the

stream

aHHen wrench,
nozzHe

spray

position.

Using

remove

extension

gun.Twist

the

(Figure

the

nozzHe
21).

the

water

gun

is steady

constant_

contaminants

from

the

pump,

washer

as described

the inoline filter from the other

end of the

suppHy and

Use the wire incHuded in the kit (or a smaHHpaper
to free any foreign materia[ dogging or restricting
nozzHe (Figure 2H).

Using a garden hose, remove additionaH debris by bacH<
flushing water through the nozzHe extension
(Figure 22). BacH_JC
rs

in "Preparing

chip)
the

PressureWasher For Use". Connect the water suppHy
and turn

water

on.

o Start the engine according to instructionsin"To Start
Your Pressure VVasher".
° Remove

nozzle

o Squeeze

the

o When
the

the

safety

Nozzle

trigger

water

from

on the
suppHy

Hatch and

attach

spray

is steady
the

gun.

gun and
and

nozzHe

hoHd.

constant,

engage

fek whiHe squeezing

may be caused

by excessive

pump

the

nozzle and

extension.
Do Not
allen wrench.

extension.

Maintenance

A puHsing sensation
trigger

extension

spray gun

Reconnect

Reconnect
start

pressure.The

the

in4ine filter

overtighten

the

the nozzle

extension

the water

supply,

engine.

turn

into the
nozzle

to the
on the

nozzle

with

the

spray gun.
water,

and

b
Y_&_

$_ra_on'

powE_P_ODUCTS

Test the pressure washer by operating with nozzHe in
the high and in the How positions.

Empty the pump of all pumped liquids by pulling the
recoil handle about 6 times.This should remove most
of the liquid in the pump.

O-Rin

8 Maintenance

Through the normal operation of your pressure washen
o-rings, which keep the connections of the hoses and spray
gun tight and leak-free, may become worn or damaged.

a worn

or damaged

ENGINE

o-ring:
to get underneath

properly

CAUTION!You

on how to

CAUTION!

CAUTION!
Avoid prolonged or repeated skin
contact with used motor oil. Used motor oil has
been shown to cause skin cancer in certain

NOTE: PumpSaver
and will stain wood

UNIT

Read and follow all cautions

and
wear

will drip from pump after treatment
and concrete.

NOTE:
If PumpSaver is not avaihble, draw RV antifreeze
(non=alcohol) into the pump by pouring the solution into a
3-foot section of garden hose connected
to inlet adapter
and pulling recoil handle twice.

STORING

THE

ENGINE

See the engine owner's manual for instructions
properly prepare the engine for storage.

siphoning tube by placing the filter into

a pail of clean water while running pressure washer in
low pressure mode (adjustable nozzle in the forward
position). Flush for one to two minutes.
2.

your unit from freezing

To use PumpSaver, make sure the pressure washer is
turned off and disconnected
from supply water. Read and
follow all instructions
and warnings given on the PumpSaver
container.

Water should not remain in the unit for long periods of
time. Sediments or minerals can deposit on pump parts and
"freeze" pump action. If you do not plan to use the pressure
washer for more than 30 days, follow this procedure:
Flush detergent

must protect

warnings on the PumpSaver can hbd.AIways
eye protection
when using PumpSaver.

laboratory animag.ThorougNy wash exposed areas
with soap and water.
KEEP OUT OF REACH OF CHILDREN. DON'T
POLLUTE. CONSERVE RESOURCES. RETURN
USED OILTO COLLECTION CENTERS.

the Pum

temperatures.
Failure to do so will permanently
damage
your pump and render your unit inoperable.
Freeze damage
is not covered under warranty.

maintain the engine.

PREPARING THE
FOR ,STORAGE

Store unit in a clean, dry area.

NOTE: Generac PumpSaver, model number 01559, is available
as an optional accessory. It is not included with the pressure
washer.

the

MAINTENANCE

See the engine owner's manual for instructions

To protect the pump from damage caused by mineral
deposits or freezing, use the Generac PumpSaver to treat
pump.This prevents freeze damage and lubricates pistons
and seals.

provided in the kit to service your unit's o-rings. Note that
not all of the parts in the kit will be used on your unit.

Use a small flathead screwdriver
o-ring and pry it off.

Use Generac brand PumpSaver to prevent corrosion
build up and freezing of pump.

Protecting

Provided with your pressure washer is an O-Ring
Haintenance Kit which includes rephcement o-rings, rubber
washer and water inlet filter. Refer to the instruction sheet

To remove

Shut off the engine and let it cool, then remove high
pressure and garden hoses. Disconnect spark plug wire
from spark plug.

on how to

bye&

S_on
_7_

POWER
p_C_UC
rs

TROUBLESHOOTmNG
Problem

Pump

has following

problems:
produce

failure

pressure,

erratic

chattering,

of pressure,
volume.

low

loss

water

Nozzle in low pressure mode.

Pull nozzle backward for high pressure

Water

mode.
Clear inlet.

3.
4.
5.
6.
7.

Inadequate water supply.
Inlet hose is kinked or leaking.
Clogged inlet hose strainer.
Water supply is over 100°F.
High pressure hose is blocked or
leal, prenda

Estire el disparador

picaporte

como

4. Use el alambre

agua.

y constante,

fin de la extensi6n

InstMe Ia m_quina lavadora a presi6n
El Lavador A Presi6n
de agua y prenda

abastecimiento
Ponga en marcha
"C6mo

el motor

DaHe Arranque

[a bomba,

extensi6n

Pars Su Uso'.

exeesiva

en Ia bomba.

la bombs

es cuando

con materiales

Conecte

de acuerdo

alas

instrucciones

Lavadora

agua en [a extensi6n

desecho

de [a boquilla

a Presi6n'.

del fusi[ del rocio.
apretado.

de agua sea uniforme

pu[sante
puede

a[ momento

y constante,

Is boqui[la

de apretar

que sea causada

La causa principal

extrahos,

suieta

que est_

6. Mstale de nuevo
extensidn.

de [as Boqu[llas

rociadora,

extraho

e[ agua.

pars boquiHas.

una sensaci6n

de la pistols

la boquilla (Figura 43).

(o un pequeho

material

de la boqui[[a aiustab[e a "stream spray" (chorro roeiador) y
mueva la boqui[[a de "low" (baio) a "high" (alto), mientras drene

[os

de seguridad 7, vuelva a aiustar la

Manten[m[ento

cualquier

agua.

a su M_quina

boquilla Ia extensi6n

enganche el cerroio

tapando

adicionaL poniendo

siga

como est_ descrito

Hale el gatilIo de la pistols y mant_ngalo
Cuando el suministro

liberar

en el iuego

pars

5. Usando una manguera de iardin, remueva cualquier

compromete

pasos:

"Preparando

incJuido

papeles)

(Figura 44), Hags 6sto de 30 a 60 segundos. Oire [a extensi6n

[os ¢ontaminantes

siguientes

Si siente

Conecte

de la seguridad.

retirar

Quite

est_ descrito

Pars Su Uso'.

en el fusi[ del rocio y el asidero.

Cu_indo el agua es constante

Para

el en el fikro de [a lines del otto

boquilla,

de [a presi6n

se encuentra

tales como

tierra,

e[gatil[o

pot Ia presi6n
atascada

de nuevo la extensidn

8. Conecte
encienda

de nuevo
el motor.
el I_vador

y en el fiItro enqinea

demasiado

de Ia boquilla a la pistola rociadora.

el suministro

a presi6n

en Ia

con la Ilave Allen.

de agua, prenda

aI hacer

funcionar

e! agua, y

la boquilJa en la

posici6n "high" y "low" o con cads una de Ias boquillas de
Conexiones
r_pidas que viene con e! lavador a presi6n.

o tapada

etc. Pars corregir

Ia boquiIla
la apriete

7. Conecte

9. Pruebe

excesiva

_ov/F_PRODUCTS

Mantenirniento
Durante

Eaoperad6n

de los AniRos

'O °

norrnai de su rn_.quina lavadora a presi6n

los anillos 'o' mantienen

remover
bombs,

apretadas y Iibres de fugas hs conexiones

de hs mangueras y h pistoh, dlos

Vacle todos los Iiquidos presentes en Ia bomba, halando la
manecilla de retroceso hasta seis veces. Esto deberia

pueden desgastarse o da_arse

COR eJ USO,

la mayor parte de los liquidos

presentes

en la

El salvador de la bomba de Ia marca del uso Generac a

AImacene

previene

la corrosi6n

construye

y hehdo de bombs.

Su m_quina lavadorm a presi6n viene con un Juego de blantenimiento
pars anillos 'O', el cuaI condene anillos 'o', arandeh de caucho y un
colador de repuesto pars la en_rada de la manguera de iardln. La
no_ que no todas hs partes en eJiuego se usarS.n en su unidad.

Prote er

Pars

A protege

retirar

Udlice

aniRo

'O'

un destornillador

desgastado

o da_ado:

la Bombs

sl PumpSaver de uso de bomba Genersc

congetar et da_o y lubrica 6mbolos

de cabeza plana pequefio, coi6quelo

pot debajo del anillo 'o' y s_,quelo haciendo

la unidad en un lugar limpio y seco.

NOTA:

paIanca.

El PumpSaver de Generac, el modeto numera 01559,

estS.n disponible

MANTEN MmENTO
MOTOR

DEL

IPRECAUCmON!

Consuke el manual dd propietario del motor para Ias
instrucciones de c6mo mantener adecuadamente el motor.

repeddo
del motor

Evite eI contacto

ha sido mostrado

CONTAbIINE.

CONSERVE

USADO

dempo. Los sedimenms

bvado

DE NI_qOS. NO

Lea y siga todo advierte y las

AI uso el PumpSave< cerci6rese Ia arandeta de la presi6n se apaga
y desconecta det agua del suminis_ro. Lea y siga todas
instrucciones y las advertencias dadas en el contenedor de
PumpSave_:

CENTRA.

NOTA: Pump%ver gotear_ de la bomba despu6s que el
tratamiento y manchar_ readers y cemento.

en la unidad por un hrgo periodo

NOTA: Si el PumpSaver no est'. disponible, ponga anticongelante
RV (que no con_enga alcohol) en la bombs, en una secci6n de
pies de Ia manguera del jardin conectada a un adaptador y
haIando la maneci{la dos veces.

en Ias

procedimiento:

ALMACENANDO
MOTOR

ConsuNe e[ manual de[ propietario

piezas de Ia bomba y "congelJ
piensa usar el Iavador a presi6n

_la acci6n de la bomba. Si usted no
pot mas de 30 dias, siga este

Vacie el mbo de detergente, coIocando el fikro en un envase
Ileno de agua Iimpia mientras est6 corriendo el agua a baia
presi6n

(Ia lanza aiustable en la posici6n

instrucciones de c6mo preparar
almacenamiento.

hacia adelan_e). Lave

por I o 2 minutos.
2.

Apague el motor

y permits

refrescar, entonces quita mangas

aitas de presi6n y iardin. Desconecte

pot

advertendas en el PumpSaver pueden marcar. Siempre
protecci6n de oio de uso cuando se usa PumpSaver.

los RECURSOS.VUELVA

o minerales se pueden depositar

Ia bombs y Ia unidad No podr_, funciona_ La

IPRECAUC_6R!

PREPARANDO
LA
UN DAD
PARA SU
ALMACENAM!ENTO
El agua no debe permanecer

su unidad de las

Si No Io hace, dadar_,

congetamiento.

Completamente

A la COLECCION

Usted deber& proteger

de congelamiento.

permanentemente

ai cancer de la piel de la causa

expuso 5.reas con eI iab6n y el agua.
bIANTENGA
FUERA DEALCANCE

opcionaL No es incluido

garanda no cubre el da_o de la unidad ocasionado

de pie! con acei_e usado de motor. El aceite usado

en ciertos animales det laboratorio,

ACEFE

prolongado

s61o como un accesorio

con la arandela de Ia presi6n.

temperamras

{PRECAUCm6N!

a previene

y setios.

el alambre de la bujla.

EL
de[ motor

pars las

adecuadamente

el motor

pars su

_ow_ P_DUCTS

REPARACmON
Problema

La bomba

presenta

DE DANOS
Causa

Soluci6n

La boquilla est_ en el modo de baja presi6n.

Mueva la boquilla
presion.

La entrada de agua est_ bloqueada.
Suministro
de agua inadecuado.
La manguera de entrada est_ doblada o

2.
3.
4.

Limpie la entrada.
Proporcione
fluio de agua adecuado.
Estire la manguera de entrada, coloque

la fuga.
Revise y limpie el colador

Proporcione

Retire

Remplace

9.
I0.

Limpie la boquilla.
P6ngase en contacto
y Stratton.

Coloque
el tubo
detergente.

Limpie o remplace
el filtro/tubo
de succi6n de
detergente.
Vea "Cheque
En el Filtro de la Linea" en la p_gina

2.
3.
4.

los

siguientes
problemas:
no
produce
presi6n, produce

una presi6n errada,
traqueteo,
p_rdida de

presi6n,

bajo volumen

7.
8.

La manguera
de alta presion
presenta fugas.
La pistola presenta fugas.

9.
I0.

La boquilla est_ obstruida.
Bomba defectuosa.

agua.

El detergente
no se mezcla
con el rociado.

El motor

funciona

bien

presenta fugas.
El colador de la manguera de entrada est_
tapado.
El suministro de agua est_ por encima de los
100°F.

El tubo de succi6n
sumergido.

El filtro

Sucio en el filtro

La boquilla

La velocidad

de detergente

de quimicos

no est_

est_ tapado.

de la linea.

est_ en el modo

del motor

est_ bloqueada

3.
de alta presi6n.

es demasiado

lenta.

El motor
arranca

una carga.

no arranca;
y funciona

suministro

de alta

un parche en

de la manguera de entrada.
de agua m_s fria.

las obstrucciones de la manguera de salida.
la pistola.

Mueva la boquilla
presi6n.

con el centro

de succi6n

de servicio

de detergente

hacia adelante

Briggs

en el

para el modo

I.
2.

Bajo nivel de aceite.
Depurador
de aire sucio.

I.
2.

Llene la caia del cig_ieffal hasta el nivel correcto.
Limpie o remplace
el depurador
de aire.

3.
4.

Sin gasolina.
Gasolina vieja.

3.
4.

Llene el tanque de combustible.
Drene el tanque de gasolina; Ilenelo
fresco.

Conecte

6.
7.

El alambre de la bujia no est_ conectado
bujia.
Bujia mala.
Agua en la gasolina.

6.
7.

Remplace la bujia.
Drene el tanque de gasolina; Ilenelo con combustible
fresco.

8.
9.

Estrangulaci6n excesiva.
Mezcla de combustible
demasiado

8.
9.

Abra el cebador por completo y haga girar el motor.
P6ngase en contacto con el centro de servicio Briggs

a la

real.

IO.

V_lvula de entrada trabada
abierta o cerrada.

I I.

El motor

ha perdido

rica.

en la posici6n

compresi6n.

10.
I I.

el alambre

y Stratton.
P6ngase
en contacto
y Stratton.
P6ngase
en contacto

con combustible

a la buiia.

con el centro

de servicio

Briggs

con el centro

de servicio

Briggs

y Stratton.
El motor
operaci6n.

se apaga

El motor

no tiene

durante

fuerza.

El motor
intenta
estabilizarse
o su
funcionamiento
constante.

30.

de baja

Mueva el control de la v_Ivula de regulaci6n a la posici6n
FAST (RAPIDO).
Si el motor continua funcionando
mal,
p6ngase en contacto con el centro de servicio Briggs y
Stratton.

cuando no tiene cargas, pero
funciona "real" cuando se
conecta

hacia atr_s para el modo

I.
2.
Filtro

Sin gasolina.
Bajo nivel de aceite.

I.
2.

de aire sucio.

Cebador

abierto

demasiado

Llene el tanque
de combustible.
Llene la caja del cigOeffal hasta

Remplace
r_pido.

Mueva
motor

no es

el filtro

el nivel correcto.

de aire.

el cebador
a la posici6n
funcione
normalmente.

intermedb

hasta que

GARANTJA
P(_LIZA

DE GARANTiA

PARA

LOS

PROP|ETAR|OS

UMJTADA

DE PRODUCTOS

PORTATJLES

(;ARANTIA

GENERA(:

Efectiva

desde

Iro de Octubre,

2001

LiHITADA

"Los productos
port,tiles
Generac,
LLC repararf* o leemplazar_i,
sin costo alguno, cualquier
parte o paltes
del equipo que est6n defectuosas
en materia]es
o msflo
de obra, o smbos. Los calgos por coneepto
de transporte
en las psltes
sometidas
a repalad6n
o t eemplazo
baio esta garantia deben ser cubiertos
pol el
compt ador: Esta garantia es efectiva por un eierto peliodo
de tiempo 7 est_ suieta a las condiciones
provistas
en Is p61iza. Para el sel vieio de garantia, consiga el
eoncesionat
io autorizado
m_s eercano
en nuest_o
maps Iocslizadot
de concesionatios
en www.genelsc_portables.corn
o Ilame al 1-877_544_0982.
NO EXISTE
OTRA GARANTJA
EXPRESA. LAS GARANTiAS
IMPLiCITAS, INCLUYENDO
AQUELLAS
DE DIERCANTIBILIDAD
O CAPACIDAD
PARA UN PROPOSITO
PARTICULAR, EST_,N LIHITADAS AL PERIODO
DE TIEP1PO ESPECIFICADO,
O HASTA EL LiHtTE PERHITIDO
POR LA LEY, TODA Y CUALQUIER
GARANTJA
IMPLiCITA EST/_, EXCLUIDA.
RESPONSABILIDAD
POR DA_qOS CONSECUENTES
BA]O CUALQUIERYTODAS
LAS GARANTJAS,
EST/_,N
EXCLUIDAS
HASTA EL LiPIITE DE EXCLUSION
PERPIITIDO POS. LA LEY.Algunos estados no pen-niten limkaciones en eu_,nto y cu_n implicsdas, las garandas
pueden ser y algunos estados no pel miten la exdusi6n o limitaci6n de da_os incidentales o consecuentes,
por Io que bs limitaciones y exdusiones arriba
rnencionadas, es posible, que no se apliquen s usted. Esta galsntia le propolcions
derechos legales especificos yes posible que usted tengs otlos derechos
cuales pueden valiar de estado a estado y de pals a pais."

PERIODO
PRODUCTOS**

PARA
I a_o

Generador
port_.dI
(V_bula lateral con motor)
Generador
port_tiI

aparece

de garanda

en Is tabla

CONSUMIDOR

DEL

PARA
USO
90 d(as

en la fecha

mencionada.

de compra

COHERCIAL

I a?_o

(el segundo afio solamente
I afio
I afio

comienza

aniba

GARANTiA*

2 afios

(Motor de v_lvula superior)
Lavador el_ctrico a presi6n
Lavador de gasolina a presi6n
-'_El periodo

USO

hecha

por

"Pat a uso del consumidol"

el primer

signiSca,

para las partes)
ninguno
90 d(as

consumidor

sl detal

uso lesidencial

por

o usuario

comercial,

un eonsumidor

al detsl.

y contin0a
"Psra

por

el periodo

uso comercial"

::_ El motor

Iss utilidades

s gssolins

EL REG|STRO

pQblicas

no estan

y las bsteriss

DE LA

gat sntizsdos.

para et eneendido,

GARANTiA

estan

de la seguridad

Los Productos

tales

gslantizsdos

ES NECESAR|O

GUARDE
SU REC|BO
DE COMPRA.
S| USTED
QUE SE REQUIERA
USAR
LA GARANTiA,
LA
PERtODO
DE GARANTiA.

Acerca

Los sccesolios

por

PARA

como

pistolas,

el fsbrieante

OBTENER

mangueras,

de esos

vat i!lss y boqui!las

estan

de tiempo

significa, todos

casos, induyendo
el uso comercisL
pals generar
un ingleso o por prop6sitos
de alquilei: Uns vez que el equipo ha sido usado cornel cislmente,
considerado
como de uso comercial
para las finalidades
de esta gsrantia. El equipo usado, el equipo de demostrsci6n
y el equipo usado como
lugsres donde
produeto.

los

excluidos

que
los otlos

deberis
se_
energia primat ia en
de la gat sntia

del

p!oduetos.

GARANTiA

EN LOS

EQUIPO$

NO PROVEE
LA PRUEBA
DE LA FECHA
DE LA COHPRA
FECHA
DE LA FABR|CACI{SN
DEL EQU|PO
SERA US;ADA

PORTATILES

DE GENERAC.

|NICIAL,
AL MOMENTO
EN
PARA DETERM|NAR
EL

de su equipo:

Portatibs

Generac,

reciben

las repsraciones

bqo

la garantia

y b pide discuIpss

pot cuslquier

inconveniencis

causads.

Cualquier

Concesionsrio

Servicio Autorizsdo
puede !levar a csbo reparaciones
bajo la garantia. La msyoria de !as reparaciones
baio la garanda
son manejadas
norrnslmente,
pero algunas
veces la solicimd del servicio
de garantia es posible que no sea apropisda.
Por ejemplo, la garanda
no sera valids si el dafio al equipo ocurri6
debido al mat uso, faka
de mantenirniento
adecuado,
manejo, envio, almscenamiento
o uns instalsci6n
insdecuada.
Similarmente,
Is gsrands
es anulsda si el nOmero de serial del equipo ha
sido removido
o el equipo ha sido alterado
o modiScado.
Si un diente
no esta de acuerdo
con la decM6n
hecha por el Concesionario
de Servicio, se Ilevara a cabo una investigaci6n
para determinar
si la garanda
se puede
aplicm: Pida al Concesionsrio
de Servicio que entregue
todos los hechos que soportan
su decisi6n
a su Distribuidor,
para que 6ste los revise. Si el Distribuidor
decide que el reclamo es jusd8cado,
al diente
se le reembolsara
completamente
por todos esos articulos
que estan defectuosos.
Para evitar un malentendido
que
pueda ocurrir entre el Concesionario
y el cliente, abajo apsrecen
algunos de las razones
por las cuabs
el equipo puede fsllar, y que la garantia no cubre:
Desgaste
Equipo

normak

el6ctrico

no eubre

sl aile libre, como

la repat aci6n

euando

|nstalaci6n

y r_antenimiento:

Ests gsrands

no se aplica al equipo

real uso, negligencia,
Porte'*dies
limpiezs
Otras

Generac,

accidentes,

los sparatos

o parte

sobrecargs,

ban afectado

del sistems

todos

el uso normal

que

ha estado

velocidad

desfavorabbmente

de combusd6n

mec_nicos,

ha acabado

sujets

excesiva,

partes,

se_vicio

(debido

suciedad,

papa que funcione

que no haya sido autorizsds
reparsci6n

Esta garanda

quirnicas,

peri6dicamente,

bien. Esta garantia

o det equipo.

inadecuads,

inadecuado,

y fiabilidad.

a materiss

y reemplazo,

en particular

a uns instalaci6n
manterfimiento

su rendimiento

y la obstrucci6n

necesita

con la vida de una parte

o ahnacensmiento,

tarnbi6n
carb6n

no cubre

o a cuslqoer

tipo

de slteraci6n,

que segOn Is opini6n

el manterfimiento

normal

de los Productos

tales

como

aiustes,

o caL etc.)

exdusiones:

Tambi6n
empaque

se encuentran
de !s bomba,

modificsciones,
ka garantia
Esta garant_a

excluidos

atte_aciones,

se encuentra

de est_ garantia,

etc. Iss bombss
un sel vicio

disponible

no se ap_ica

al servicio

insdecuado,

solamente
proveniente

Osted puede ubicar su Concesionario
de $ervicio
de ¢oncesionarios
en www.generac-portables.corn
Los P!oductos

Port,tiles
5902094

el desgaste

que se hagan

de Genetac

funcionar

de los srticulos
o trabsjsr

congelsmiento

a trav&s

tales

o detetioro

Autorizado
o Rar_e al

otra

conectadores,

rnedidol

y mslfuncionsrnientos

COl reas, anillos

que resulten

de accidentes,

O, filtros,
abusos,

de servicios

autorizados

Port&tiles

de Generac

pot

los Productos

Port,tiles

Generac°

entidad.

de los Productos
1-877-844-0982.

est_n fsbricados baio una o m_s de Iss siguientes patentes:
5823752
5718255

Genera¢

es de sceite,

quirnico.

de los concesionarios

de cua_quier

como,

sin agua, o dahos

Portable Products, LLC

jefferson,Wisconsin

U.S.A.

r_&s cercano,

(Otras

pstentes

en nuestro

r_apa

est_n pendientes)
5890413

Iocalizador

LiMiTED
GENEPJkC

PORTABLE

PRODUCTS

WARRANTY

OWNERWARRANTY
LiHiTED

"Generac

Portable

workmanship
This warranty
Authorized

Products,

LLC will repah" or replace,

free of charge, any part, or parts

or both_Transportation
charges on parts submitted
for" repair
is effective for the time periods and subject to the conditions
Service

WARRANTY.

Dealer

in our dealer

[MPUED WARRANTIES,

LIMITED TO THE TIME PERIOD
EXCLUDED.

Iocator

POLICY

DAHAGES

of the equipment

that

1,2001

are defective

or call [-877-544-0982.THERE

OF HERCHANTABILITY

SPECIFIED, OR TO THE EXTENT

LIABILITY FOR CONSEQUENTIAL

October

in material

or replacement
under this Warranty
must be borne by purchaser:
provided for in this policy. For" warranty
service, find the nearest

map at wwwgenerac-portables.com

[NCLUDINGTHOSE

Effective

WARRANTY

PERHITTED

AND

FITNESS FORA

[S NO OTHER

PARTICULAR

EXPRESS

PURPOSE,ARE

BY LAW ANY AND ALL [HPLIED VVARRANTIES ARE

UNDER ANY AND ALL WARRANTIES

ARE EXCLUDED

TO THE EXTENT

EXCLUSION
[S PERMITTED BY LA\A! Some states do not allow limitations on how long an implied warranty lasts, and some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you_This
warranty

gives you specific legal rights and you may also have other

Portable

PRODUCTS**
Generator

rights which vary from state to state and country

WARRANTY

stated

period

in the table

including

begins

on the date

above. "Consumer

use for" commercial

to be in commercial

producing

use for purposes

engine

and starting

WARRANTY

REGiSTRATiON

COMMERCmAL
90 days

or rental

parts
batteries

residential
purposes.

Used

household
Once

None
90 days

equipment,

are warranted

or commercial

has been used

demonstration

equipment

and nozzles

are excluded

solely by the manufacturers

iS NOT NECESSARYTO

end user; and continues

use by a retail consumer.

equipment

such as guns_ hoses, wands

USE

I year

by the first retail consumer"

persona[

of this warranty_

of a utility are not warranted.Accessory
I_ The gasoline

of purchase

use" means

income

USE

2 years
(2nd year parts only)
I year
I year

(Overhead Valve Engine Powered)
Electric Powered Pressure Washer
Gasoline Powered Pressure VVasher
_ The warranty

PERIOD*

CONSUMER
Iyear

(SideValve Engine Powered)
Portable Generator

of those

OBTAIN WARRANTY

"Commercial

your

equipment

it shah thereafter

and equipment

used for prime

from

the product

Portable

warranty

repairs.

warranty

would not apply if equipment

Service

welcomes

Most warranty

repairs

to submit

warranty
damage

routinely,

occurred

of the Service

all supporting

for those

repair and apologizes

are handled

uses,

be considered
power

in place

warrant)s

products.

ON GENERAC

of equipment

requests

PORTABLE

PRODUCTS

OFTHE
iNiTiAL
DATE OF THE

avoid misunderstandings

failure that the warranty

does

decides

that might occur

Service

Dealer

may not be appropriate.

may perform
For example,

shipping, handling, warehousing

or the equipment

vviJl be made to determine

for review. If the Distributor

Authorized

service

maintenance,

has been removed

Dealer, an investigation

Outdoor
Power Equipment, like aH mechanical devices,
does not cover repair when normal use has exhausted
installation
and Maintenance:

for warranty

of misuse, lack of routine

of the equipment

facts to its Distributor"

items that are defective.To

are some of the causes
Norma_ wear:

to you for being inconvenienced.Any

but sometimes

because

is void if the seria! number

differs with the decision

Dealer

fully reimbursed
below

Products

Similarly, warranty

If a customer"

of time

all other

warranty:

Generac

installation.

for the period
use" means

commercially,

EQUIPMENT.
SAVEYOUR PROOF OF PURCHASE
RECEIPT. mFYOU DO NOT PROVIDE PROOF
PURCHASE
DATE AT THE TIME WARRANTY
SERvmcE ms REQUESTED, THE MANUFACTURING
EQUIPMENTWHLL
BE USEDTO DETERMINETHEWARRANTY
PERIOD.
About

to country"

has been altered
the warranty

applies_Ask

that the claim is iustified,

the customer

between

whether

or improper

or modified_

the customer

the
will be

and the Dealer_ listed

not cover:

needs periodic parts, service and replacement
the life of a part or the equipment.

This warranty does not apply to equipment
or" parts that have been subjected
misuse, negligence, accident, overloading,
overspeeding,
improper
maintenance,

to perform

welLThis

warranty

to improper" or unauthorized
installation or alteradom
repair or storage so as, in Generac
Portable
Products'

iudgment, to adversely affect its performance
and reliability_This warranty aim does
fuel system cleaning and obstruction
(due to chemical, dirt, carbon or lime, etc.).
Other
Exclusions:

not cover

normal

maintenance

such as adiustments,

Also excluded from this warranty are wear items such as quick couplers, oil gauges, belts, o-rings, filters, pump packing, etc., pumps
which have been run without water supplied or damage or malfunctions resulting from accidents, abuse, modifications, alterations, or
improper servicing or freezing or chemical deterioration_
Warranty
service

is available
by any other

You may locate

onmy through

your

www.generac-portabies.com
Oenerac

service

dealers

authorized

by Generac

Portabme

Products.This

warranty

does not

appmy to

entity.
nearest

Authorized
or call

Generac

Portabme

Product

Service

Dealer

in our

dealer

Patents:

(Other
5890413

mocator

map

1=877=$44=0982.

Portable
Products
5902094

Are Made

Under One
5823752

Generac

Or More Of The Following
5718255

Portabme

jefferson,Wisconsin

Products,
U.S.A.

LLC

Patents

Pending)

]

[

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 36
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Aug 14 22:28:05 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Generac 1674 0 User Manual PRESSURE WASHER Manuals And Guides L0505107

GENERAC Power Washer, Gas Manual L0505107 GENERAC Power Washer, Gas Owner's Manual, GENERAC Power Washer, Gas installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation