General Dynamics Mission Systems MXU2000N-R Fixed Satellite Tranceiver User Manual MXUEXH7A

General Dynamics C4 Systems Fixed Satellite Tranceiver MXUEXH7A

Contents

Exhibit 7A Administration Manual

APPLICANT: MOTOROLA GSTG FCC ID: MIJMXU2000N-RDRAFT OF ADMINISTRATION MANUALEXHIBIT 7A
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 1ASTERISK INDICATES DATAREVISIONSWHICH IS NONMANDATORY REV DESCRIPTION DATE APPROVED FOR INFORMATION ONLY XA Engineering Red Line Control 3 Feb 99 KHS*APPLICATION XBNEXT ASSY USED ONSEE SEPARATE WIRE LIST YES NO XSEE SEPARATE PARTS LIST YES NO XPROJ. NO. DWN BY INTERPRET DRAWING IN ACCORDANCE14114 Ken Schmidt WITH STANDARDS LISTED IN DOD-STD-100.UNLESSOTHERWISESPECIFIED:DOC CHK BYSCOTTSDALE, AZ85252-1417Space and Systems Technology GroupDSGN CHK BYALL DIMENSIONSARE INCHES. CONTR NO.DWG IS ENDPROD. MXU NOMAD ADMINISTRATION MANUALISSUEDTOLERANCES:2 PLACEDEC ± N/A MATL APVD3 PLACE MFG APVDDEC ± N/A SIZE CAGE CODE DRAWING NO.ENGRG APVD A 94990HOLE DIAN/A CUST APVDANGLE ± N/A NA SCALE NONE WT. NA SHEET 1 OF
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 2NOMAD MXU Configuration Manager (MCM) Software License Agreement (on the CDs)NOMAD MXU Application Software License AgreementTechnical Support Numbers
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 3Version Date Name ReasonVersion Date name Reason Change
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 41. TABLE OF CONTENTS1 INTRODUCTION.................................................................................................................................71.1 Purpose............................................................................................................................................71.2 Acronyms and Definitions ..............................................................................................................71.3 Safety ..............................................................................................................................................72 NOMAD SYSTEM OVERVIEW........................................................................................................92.1 System Description.........................................................................................................................92.2 NOMAD MXU Configuration Manager (MCM) .........................................................................102.2.1 MCM Overview....................................................................................................................102.2.2 MCM Features ......................................................................................................................112.2.2.1 Main Screen ......................................................................................................................112.2.2.2 Date Fields ........................................................................................................................112.2.2.3 NOMAD MXU Location Information ..............................................................................122.2.2.4 NOMAD MXU Connection Data .....................................................................................122.2.2.5 Nomad Airtime Recharge .................................................................................................132.2.2.6 Security Configuration...................................................................................................... 142.2.2.7 Define Groups................................................................................................................... 152.2.2.8 Selecting a Group to Display ............................................................................................162.2.2.9 Add NOMAD ISU Button ................................................................................................162.2.2.10 NOMAD ISU Display Window.................................................................................... 172.2.2.11 Changing Entries........................................................................................................... 172.2.2.12 Menu Bar ......................................................................................................................182.2.2.12.1 File Menu..................................................................................................................182.2.2.12.2 Connect Menu........................................................................................................... 192.2.2.12.3 Diagnostics Menu..................................................................................................... 192.2.2.12.4 Security Menu........................................................................................................... 202.2.2.12.5 Support Menu ........................................................................................................... 212.2.2.13 Display / File Options ...................................................................................................212.3 NOMAD Console ......................................................................................................................... 212.3.1 Front Panel............................................................................................................................ 222.3.2 Back Panel ............................................................................................................................233 INSTALLATION................................................................................................................................253.1 Overview....................................................................................................................................... 253.2 Install NOMAD MXU Console ....................................................................................................263.3 Install Admin and Monitors PCs..................................................................................................263.3.1 PC Configuration ..................................................................................................................263.3.2 Windows NT.........................................................................................................................263.3.3 Remote Access Services .......................................................................................................263.4 Install MCM Program...................................................................................................................273.4.1 Install Program......................................................................................................................273.4.2 Execute MCM Program ........................................................................................................274 INITIALIZATION and OPERATION.............................................................................................274.1 Creating a New NOMAD MXU Configuration............................................................................274.1.1 Get Required Information .....................................................................................................274.1.2 MCM New Configuration Screen .........................................................................................284.1.3 Enter Connection Data..........................................................................................................284.1.4 Enter Security Data...............................................................................................................294.1.5 Configure Pooled Time Groups ............................................................................................294.1.6 Enter MSISDNs ....................................................................................................................294.1.7 Set Nomad Airtime Recharge ...............................................................................................294.1.8 Allocate Airtime....................................................................................................................294.1.9 Save the Configuration Document ........................................................................................ 304.1.10 First NOMAD MXU Communication (Initialization) .........................................................30
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 54.1.11 Country Code Setting............................................................................................................304.2 Administration Issues....................................................................................................................304.2.1 Operator Security.................................................................................................................. 314.2.2 Air Time Recharge Control...................................................................................................314.2.3 Maintaining Consistency with the NOMAD MXU...............................................................314.2.4 Creating a Field Unit............................................................................................................. 314.3 Files and Directories .....................................................................................................................315 TROUBLE SHOOTING GUIDELINES .......................................................................................... 325.1 Troubleshooting VS. Security.......................................................................................................325.2 How TO Retrieving NOMAD MXU Diagnostics Files................................................................ 325.3 Initialization..................................................................................................................................325.4 NOMAD MXU Operation Problems ............................................................................................335.5 Administrative Station Problems ..................................................................................................335.6 Monitor Station Problems.............................................................................................................335.7 NOMAD MXU System Problems ................................................................................................34APPENDIX “A” - Null Modem Cable ...................................................................................................... 37APPENDIX “B” - Example Create Text File ...........................................................................................37APPENDIX “C” – Specifications...............................................................................................................84APPENDIX “D” - Warranty......................................................................................................................86
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 6TABLE OF FIGURESFigure 2.1-1: NOMAD System....................................................................................................................... 9Figure 2.2.2.1-1: MCM Main Screen...........................................................................................................11Figure 2.2.2.3-1: NOMAD MXU Location Information ............................................................................. 12Figure 2.2.2.4-1: NOMAD MXU Connection Data Fields........................................................................... 12Figure 2.2.2.5-1: Nomad Airtime Recharge Fields......................................................................................13Figure 2.2.2.6-1: Security Configuration Fields ..........................................................................................14Figure 2.2.2.7-1: Pooled Airtime Group Fields ...........................................................................................15Figure 2.2.2.8-1: Group Selection for Display............................................................................................. 16Figure 2.2.2.9-1: New NOMAD ISU Data Fields........................................................................................ 16Figure 2.2.2.10-1: NOMAD ISU Display Window ..................................................................................... 17Figure 2.2.2.11-1: Change Entry Fields.......................................................................................................18Figure 2.2.2.12.1-1: File Menu .................................................................................................................... 18Figure 2.2.2.12.2-1: Connect Menu.............................................................................................................19Figure 2.2.2.12.3-1: Diagnostics Menu........................................................................................................19Figure 2.2.2.12.3-2: LBT Update Selection.................................................................................................20Figure 2.2.2.12.4-1: Security Menu.............................................................................................................20Figure 2.2.2.12.5-1: Support Menu.............................................................................................................. 21Figure 2.2.2.13-1: Group to Display.............................................................................................................21Figure 3.2-1: NOMAD Console....................................................................................................................22Figure 3.2.1-1: NOMAD Front Panel...........................................................................................................22Figure 2.3.2-1: Nomad Back Panel............................................................................................................... 23Figure 3.1-1: Installation Overview..............................................................................................................25Figure 4.1.2-1: New MCM Screen...............................................................................................................28
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 71 INTRODUCTION1.1 PurposeThis administration manual has been written for the following purposes:1. Administration of the NOMAD MXU from a remote location over PSTN telephone lines.2. Administration of the NOMAD MXU from a local location over the RS232 port.3. Monitoring only of the NOMAD MXU from a remote location over PSTN telephone lines.4. Monitoring only of the NOMAD MXU from a local location over the RS232 port.1.2 Acronyms and DefinitionsNOMAD SystemNOMAD MXUMXUNOMAD ISUISUPC Personal ComputerCDR Call Detail RecordCD ROM Compact Disk Read Only MemoryCFB Call Forward on subscriber BusyDTMF Dual tone Multi-FrequencyISU Iridium Subscriber UnitLBT L Band TransceiverLEO Low Earth OrbitISDM Integrated Service Digital networkMCM MXU Configuration ManagementMSISDN Mobile Service Integrated Service Digital NetworkMXU MultiExchange UnitPBX Public Branch ExchangePC Personal ComputerPSTN Public Switched Telephone NetworkSIM Subscriber Identity Module1.3 SafetyThe NOMAD MXU has been designed and tested to comply with UL 1950, EN60950 and IEC 950 safety standards. These standards are accepted in most of theindustrialized world and are considered defacto standards worldwide.Warnings, cautions, and notes listed below are used in various sections of the Installation andAdministration Manuals.WARNINGIMPROPER GROUNDING HAZARD
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 8High voltage is produced by commercial power access points and generator sets. Never attempt to connectto commercial power or start a generator set if it is not properly grounded. Failure to observe this warningcan result in serious injury or death by electrocution.WARNINGHIGH VOLTAGE HAZARDThis equipment contains lethal voltages. Remove power from equipment before handling. Failure toobserve this warning can result in serious injury or death.CAUTIONCAUTIONAntenna Radiation EmissionAs a precaution, maintain a minimum distance of 30 centimeters (12 inches) from theantenna array while in operation.CAUTIONLITHIUM BATTERYDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type recommended by the manufacturer.Dispose of used batteries according to the manufacturer’s instructions
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 92 NOMAD SYSTEM OVERVIEW2.1 System DescriptionFigure 2.1-1: NOMAD SystemNOMAD SystemThe NOMAD System consists of the following major subassemblies:a. Local Public Telephone Switched Network (PSTN):b. NOMAD Multi-Channel Unit (NOMAD MXU):c. Optional Control PC: Allows monitoring of the NOMAD system if desired.d. Constellation of LEO Satellites:e. Gateway: Controls the Iridium network and the NOMAD System.f. NOMAD Control PC: Used by the Gateway to control the NOMAD MXU unit.g. Gateway PSTN: Public Switched telephone network attached to the Gatewayh. Trunk Line: The communications path between the local PSTN and the Gateway PSTN. Thispath is used by the Gateway Control PC to initialize and control the NOMAD MXU.i. Iridium Subscriber Units (NOMAD ISU): Iridium portable handsets/telephones.The equipment supplied to the user’s site consists of the NOMAD MXU, antenna, mast, wiring anddocumentation as indicated by the rectangle in FIGURE 2.1-1. Once the NOMAD MXU is installed perthe instructions in the Administrative and Installation Manuals, the NOMAD system will enable NOMADISU calls (from anywhere within a region defined by the Gateway) to be connected to the local PSTN.The NOMAD system will provide up to four channels of Iridium based global voice communicationservices from a NOMAD ISU to a local PSTN via the NOMAD MXU. The NOMAD MXU attaches to thelocal PSTN using four standard, two-wire, analog phone lines and appears as four additional telephones tothe PSTN. The NOMAD MXU connects to the Iridium Constellation via four L-Band Transceivers (LBT)NOMADISURS232GatewayPSTNSatellite(SV)NOMADMXUAnalogPhone LinesLocalPSTNModemGATEWAYRJ11110/230VAC50/60 Hz.On SIte InstallationTrunklineLocalAdmin or Monitor PCRemoteAdmin or Monitor PCNOMADISU
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 10located inside the NOMAD MXU. Phones attached to the local PSTN will be able to receive NOMAD ISUcalls via the NOMAD MXU and IRIDIUM global system.A call placed from a NOMAD ISU to a person on the local PSTN will require the dual dialing procedureillustrated in the following steps:a. The NOMAD ISU caller will dial the Iridium phone number of the NOMAD MXU’s channel oneLBT.b. When answered by the NOMAD MXU, a tone will indicate to the NOMAD ISU user that he isrequired to enter his account number.c. The account number is then entered by the NOMAD ISU caller.d. The NOMAD MXU will check the account number to insure the caller is allowed on the NOMADsystem. If the caller is a valid user, the NOMAD MXU will connect the caller to the local PSTNand the caller will hear a 2nd dial tone.e. The NOMAD ISU caller will then dial the PSTN destination number.f. The dialed number will be passed through the IRIDIUM constellation, NO<MAD MXU and thento the local PSTN. The PSTN will ring the destination phone and the call will be completed whenthe called party answers.2.2 NOMAD MXU Configuration Manager (MCM)2.2.1 MCM OverviewThis section describes the NOMAD MXU Configuration Manager (MCM) software package for theIridium Nomad program.The NOMAD MXU devices are configured and monitored by the NOMAD MXU Configuration Manager(MCM) program. The NOMAD MCM is installed on a PC at an Iridium Gateway site and connects to theNOMAD MXUs over a modem/phone line connection. It is also possible to directly connect an NOMADMXU and a PC running the MCM program by using a null modem cable between serial ports on eachmachine. One MCM installation can control a large number of NOMAD MXUs. Each NOMAD MXUconfiguration is stored in a file with the extension .mxu.Each Nomad phone is assigned both a standard Iridium phone number (called an MSISDN) and a uniqueseven digit account number. The account number is for keeping track of airtime for each NOMAD ISU.The account number is created for each MSISDN by the MCM software. The account is then eitherprogrammed into the SIM card of the phone or entered into the phone’s re-dial memory. This account mustbe entered after the Iridium phone user dials and connects to the NOMAD MXU.The NOMAD MCM software is installed on a PC running Microsoft NT 4.0. It presents an interface thatthe administrator can use to communicate with the NOMAD MXU for the purpose of enabling service,monitoring airtime usage and allocating airtime for individual or pooled groups of phones. It also allowsthe administrator to retrieve and view airtime usage logs and diagnostic reports.The software is released in three versions:• The Administration version described in this document (MCM_Admin.exe).• A Monitor or "read only" version which is a subset of the Administration version(MCM_Monitor.exe)• A Support version, which contains extra functions, used to diagnose or recover from error situations(MCM_Support.exe).
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 11Typically, the Gateway Nomad administrator uses the Administration version of the MCM to configure andcontrol the NOMAD MXUs. A Monitor version of the MCM may be installed at each NOMAD MXU siteto allow the Nomad program participants to view airtime usage and system logs, etc. It is possible to usethe administration and monitor versions of the MCM software at either location; however, read thecautions in the trouble shooting section (5.0) before trying to do so. Nomad program support personnel use the Support version of the MCM2.2.2 MCM Features2.2.2.1 Main ScreenFigure 2.2.2.1-1 is an example of a small NOMAD MXU configuration. It has been saved with thefilename Phoenix.mxu. The next sections will describe the fields and menus, and their functions.Figure 2.2.2.1-1: MCM Main Screen2.2.2.2 Date FieldsThe date fields are for display only and cannot be edited by the user. All dates are displayed in UniversalCoordinated (GMT) time.The Date of Displayed Data field is valid only after the first successful configuration update. Until then itwill display the NT system "zero" time: Midnight, Jan. 1, 1970. The Last Security Poll field will alsoshow this date until a successful contact is made with the administered NOMAD MXU.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 12The Date of Displayed Data is set when a connection to upload or download configuration data to/fromthe NOMAD MXU completes successfully. It is the date when the MCM and the NOMAD MXU were lastin agreement on the Nomad and Paid airtime values shown in the configuration.The Last Security Poll field is set whenever the MCM and the NOMAD MXU make contact. If thesecurity timeout were enabled for 5 days, then the NOMAD MXU would shut down 5 days from the dateshown in this field.2.2.2.3 NOMAD MXU Location InformationFigure 2.2.2.3-1: NOMAD MXU Location InformationThe NOMAD MXU location field, figure 2.2.2.3-1, is a text description of the NOMAD MXU site,intended to identify the site in printed reports. It will be included in the header information when theconfiguration is printed. The administrator can edit this field to be whatever is wanted.The Pulse/Tone selection buttons describe the local phone system to which the NOMAD MXU is attached.As shown in the above illustration, the phones attached to the NOMAD MXU for the Phoenix Red Crossuses TONE dialing.The Country Code is a drop-down selection box containing phone system configuration selections based onthe installation country for the NOMAD MXU.2.2.2.4 NOMAD MXU Connection DataFigure 2.2.2.4-1: NOMAD MXU Connection Data Fields
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 13The upper text entry field must contain the entire phone digit text string required to dial up the remote site,including digits to get an outside line, country code, prefix, etc. This field is ignored when a directconnection is configured. Here is an example of a typical dial string:9, 1 602 441 7705 (Note, spacing is not required)9 allow the modem to connect to an outside line, causes the modem to pause to allow the outside line to connect1 long distance prefix602 area code441 7705 number in areaThe Modem or Cable selection tells the program what RAS device to use to make the connection; eitheruse the dial-up number over a modem, or use a serial cable connecting the two machines. Clicking ineither box will cause the program to attempt to find the correct driver for the selection, configure theconnection, and then save the configuration data. This procedure will fail if the selected connection typedoes not find a RAS –capable device (modem or serial driver). When RAS is configured, one or both typesof devices must be added – refer to Microsoft documentation.If the current configuration file has not yet been saved (If it is named Untitled) then you will be promptedto supply a name for the new configuration file.Directly below the Modem/Cable selection boxes are two display fields. The upper display field contains atext status field that shows the current connection state: Connected, NoConnection, Connecting…,Updating Software. The lower display field is a "thermometer" type gauge that will show progress insetting up a connection or large file transfer.2.2.2.5 Nomad Airtime RechargeFigure 2.2.2.5-1: Nomad Airtime Recharge FieldsThe Nomad Program is designed to allow each Iridium account that is configured on an NOMAD MXU toreceive an allotment of airtime at the beginning of each month. This is “automatic recharge.” Theautomatic recharge may be turned on or off for a given NOMAD MXU by setting or clearing AutoRecharge On. The number of minutes allotted for each account associated with the NOMAD MXU isentered into the Recharge Minutes field. When the Apply Recharge Minutes field is clicked, each phoneaccount is configured with that amount of recharge time. Then, at the start of the next calendar month, therecharge time is converted to usable Iridium Nomad Airtime. Pooled airtime groups will be allocated thenumber of minutes in the Recharge Minutes field times the number of phones in the group.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 142.2.2.6 Security ConfigurationFigure 2.2.2.6-1: Security Configuration FieldsThe Security functions allow the administrator to enable or disable the NOMAD MXU. If disabled (boxnot checked), the NOMAD MXU will ignore all Iridium call attempts except a call from the NOMADMXU Configuration Manager program. The administrator can set a timeout feature that causes theNOMAD MXU to disable itself if the administrator (using the MCM program) does not contact it withinthe specified number of days. Whenever the MCM program successfully contacts the NOMAD MXU, theLast Security Poll field will be set to the current UCT (Universal Coordinated Time). This "resets theclock" and the timeout period will begin counting again.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 152.2.2.7 Define GroupsThe Define Groups button brings up a dialog box that allows the administrator to create and name groupsof Iridium phones. Group member phones will share the airtime that is allotted to them. For example, ifeach phone in a group account is allotted 30 minutes, and there are 5 phones in the group, than each phonein the group can call on a pool of 150 minutes of shared time.Figure 2.2.2.7-1: Pooled Airtime Group FieldsA group is created by typing in a name, checking the Group Enabled box and exiting the dialog byclicking on the APPLY buttonAfter a group is created, Iridium Subscriber Units (NOMAD ISUs) may be assigned to it when they areconfigured with the Add NOMAD ISU button.A group is deleted by clearing the Group Enabled box and clicking the APPLY button. All currentmember NOMAD ISUs will be removed from the group, and will no longer share air times. EachNOMAD ISU will show “NONE” as its group in the main display window and its airtime fields will bezero.A group is renamed by simply typing a new name and leaving the "Group Enabled" box checked.To exit the dialog without applying the changes, use the "Cancel" button.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 162.2.2.8 Selecting a Group to DisplayThe scroll box below the NOMAD ISU Display Window (figure 9) selects a group to be displayed in thewindow. The user can select a group, or select "NONE" to show phones which are not assigned to anygroup, or select "ALL" to show all phones at the NOMAD MXU site, whether they are group members ornot.Figure 2.2.2.8-1: Group Selection for DisplayThe group selection also applies to the text file report that is created by clicking on the "File" menu andselecting Create Text File. In other words, the NOMAD ISU entries currently shown in the NOMAD ISUDisplay window are the same ones that will be included in the text file when the Create Text File menucommand is used.2.2.2.9 Add NOMAD ISU ButtonClicking the button creates the following dialog:Figure 2.2.2.9-1: New NOMAD ISU Data FieldsThis dialog accepts the Iridium phone numbers (MSISDN) and allows the creator to assign the phone to agroup for pooled time-sharing. If the phone is not a group member, select NONE. When OK is clicked,the new entry is added to the scroll box display and assigned a unique ID Number that will be used by thephone to access the NOMAD MXU. This ID number can be programmed into the SIMS used in theIridium Phones (called NOMAD ISUs, or Iridium Subscriber Units), or the ID number may be given to theIridium phone end-user to enter after connecting to the NOMAD MXU. The number is used by the Nomadprogram to charge airtime.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 172.2.2.10 NOMAD ISU Display WindowFigure 2.2.2.10-1: NOMAD ISU Display WindowThe large display box at the bottom of the screen shows each Iridium Phone that is configured for anNOMAD MXU site. Entries are displayed in ascending MSISDN order. All groups or a single group aredisplayed by use of the selection box beneath the display. When the “group" NONE is selected, all phoneswhich are not members of a time-sharing group will be displayed.The fields shown in the display are:• MSISDN - The Iridium system phone number• Status - "Busy" if the phone is in use when the NOMAD MXU configuration isdownloaded, otherwise “Free”• ID Number - Created when the Phone is added, must be programmed into the SIM or dialed by the Iridium phone user after the NOMAD MXU answers.• Pooled Time Group - Name of the group or NONE if not in a group• Nomad Time - Current Nomad time available to each group member or single phone• Paid Time - Current Paid time available to each group member or single phone• Recharge Time - Nomad time to be automatically added at end of each monthThe times are displayed as base times plus or minus changes made but not yet sent to the NOMAD MXU:EXAMPLE: 0120+0030 would mean that the phone or group had 120 minutes in that category and thatthe administrator added 30 minutes. After sending the configuration to the NOMAD MXU, the same fieldwould display as 0150+0000.2.2.2.11 Changing EntriesDouble Clicking on any existing entry in the NOMAD ISU Display Window (figure 9) will bring up thefollowing dialog box:
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 18Figure 2.2.2.11-1: Change Entry FieldsThe administrator can change the airtimes, delete the MSISDN entry or change the group membership ofthe MSISDN.2.2.2.12 Menu BarThis section covers the drop down menus available from the main screen of MCM. File MenuFigure 2.2.2.12.1-1: File MenuThe New menu selection creates a blank configuration document that can be changed and then saved with aname by using either the Save or Save As menu selections. Open displays the installation directory so thatan existing configuration (.mxu) file can be selectedThe Create Text File selection outputs the configuration data to a formatted text file and allows the user tobring up the default text editor to edit and print it. The file will be created in the MCM sub-directory thathas the same name as the configuration file. The file extension will be .txt instead of .NOMAD MXU.Refer to Appendix B for an example of the data format.The list of files above the Exit selection contains the names of the last files opened using the MCMprogram. Selecting from this list will re-open that file.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 192.2.2.12.2 Connect MenuThis menu allows the administrator to retrieve the current configuration and airtime values from theNOMAD MXU and to apply a changed configuration to the NOMAD MXU. It is also used to configurethe NOMAD MXU telephone system interface for the country of the NOMAD MXU site.Figure 2.2.2.12.2-1: Connect MenuThe Get Configuration from Unit command connects to the NOMAD MXU unit over the modemconnection or direct connect cable (whichever is currently configured) and then uploads and displays thecurrent configuration. This allows the administrator to see how much airtime has been used and to get anupdated base for changing the configuration. After a configuration is successfully uploaded, the "Date ofDisplayed Data” time is set to the current GMT timeThe Send Current Configuration command connects to the NOMAD MXU unit over the currentlyconfigured interface and sends the displayed configuration values. Any changes to airtime categories, newor deleted phones, changes to groups, etc. will be applied by the NOMAD MXU. After a successfulupdate, the time fields displayed as plus or minus base times are added to base times, and the +/- changesbecome zero in the MCM display. The administrator should save the current configuration file aftersending a changed configuration and (recommended) use the Get Configuration from Unit command toverify that the changes have been applied.The Get/Send Country Code commands allow the administrator to change the telephone configuration forthe NOMAD MXU. This should only be done when the PC running the MCM program is directlyconnected to theNOMAD MXU by a serial cable. The settings can be changed to allow an MCM installation on another PCto dial in over a modem from anywhere in the world. When the setting is working, than the modem-connected PC running MCM must not be used to change it or it could “lock itself out” from connectingagain. Refer to the section on creating a new NOMAD MXU configuration.2.2.2.12.3 Diagnostics MenuFigure 2.2.2.12.3-1: Diagnostics Menu
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 20The Get Diagnostic Logs command connects to the NOMAD MXU and uploads the latest logs, whichcontain information on system usage and system health. The Display Diagnostic Logs command showsthe directory contents of the file directory created for the NOMAD MXU. The administrator can display,edit or print the files by selecting them. The files are opened by whatever default text editor is configuredfor the system (Notepad, for example).The Clear Diagnostic Logs command resets the logs on the NOMAD MXU to zero entries. NOTE: Thisshould only be done if advised by support personnelThe Get Software Version command connects to the NOMAD MXU and retrieves and displays thecurrently installed version numbers for software and firmware.The Get Error Logs and Display Error Logs commands function like the Diagnostic Logs commands butupload error reports, instead of diagnostic logs.The Update Software and Update Firmware commands check the installation directory to see if codeupdates are included in the installation. If updates are found, the NOMAD MXU is contacted and the newcode is transferred.Update Firmware presents the following dialog box to allow the Administrator to control which Iridiumtransceiver will be upgraded. There will be directions with the upgrade software distribution to explain ifany selection other than “ALL LBTs” should be used.Figure 2.2.2.12.3-2: LBT Update Selection2.2.2.12.4 Security MenuFigure 2.2.2.12.4-1: Security Menu
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 21The Get Current Security Settings command connects to the NOMAD MXU to retrieve and display thesettings that are currently in force. The Apply the Security Settings command sends the currentlydisplayed settings (NOMAD MXU Enabled, Timeout Enabled, and Timeout Interval) to the NOMADMXU.2.2.2.12.5 Support MenuFigure 2.2.2.12.5-1: Support MenuThe support menu is grayed out for the Administration and Monitor releases of the Configuration Managersoftware. These functions are intended for use by support personnel only.2.2.2.13 Display / File OptionsThe main screen window has a selection control underneath it that allows the user to select what is shownin the display. The administrator can choose to display any one of the defined groups, or all of the groupsand phones (ALL, the default), or just those phones that are not members of a pooled-time group (NONE).In each case the entries will be ordered in ascending MSISDN value. Only the MSISDN entries that arecurrently displayed will be included in text file output for printing or editing. See the File Menu section,Create Text File.The scroll arrows on the right of the box are used to show each defined group, or the ALL or NONEselections.Figure 2.2.2.13-1: Group to Display2.3 NOMAD Console
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 22Figure 3.2-1: NOMAD ConsoleThe NOMAD MXU Console is illustrated in Figure 3.2-1. The console is a standard 19 inch rackmountable drawer. The displays on the front panel, and the connections on the rear panel, are described inthe following paragraphs.2.3.1 Front PanelFigure 3.2.1-1: NOMAD Front PanelThe controls and indicators on the front panel are illustrated in Figure 3.2.1-1 and defined as follows:Control Interface: RS232 interface that allows the operation of the NOMAD MXU to be administered ormonitored via the Personal Computer (PC) defined in paragraph 4.1.3.1Line 1 Indicator: Illuminated when Line 1, attached to the PSTN is active.Line 2 Indicator: Illuminated when Line 2, attached to the PSTN, is active.Line 3 Indicator: Illuminated when Line 3, attached to the PSTN, is active.Line 4 Indicator: Illuminated when Line 4, attached to the PSTN, is active.Ready Indicator: Illuminated when the NOMAD MXU has passed the power on diagnostics and is readyto pass data.Channel 1 Indicator: Illuminated when NOMAD MXU is making a call over the Constellations.Channel 2 Indicator: Illuminated when NOMAD MXU is making a call over the Constellations.Line 1Line 2Line 3Line 4Channel 1Channel 2Channel 3OnReadyPowerChannel 1 InitiatePowerDownSequenceControl InterfaceLine 1Line 2Line 3Line 4Channel 1Channel 2Channel 3OnReadyPowerChannel 1 PowerDownSequenceControl Interface
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 23Channel 3 Indicator: Illuminated when NOMAD MXU is making a call over the Constellations.Channel 4 Indicator: Illuminated when NOMAD MXU is making a call over the Constellations.Power Indicator: Illuminated whenever the NOMAD MXU is powered on.On Push Button Switch: Activates NOMAD MXU on. Note: Due to the NOMAD MXU running selftests, there will be a delay of approximately 60 seconds before the ready indictor isactivated.Power Down Sequence Push Button Switch: This switch instructs the NOMAD MXU to power down.NOTE: there will be a delay of approximately 60 seconds form the time the pushbutton ispushed and the power light goes out. This is caused by the microprocessor processing dataand storing the results on the internal hard drive.2.3.2 Back PanelFigure 2.3.2-1: Nomad Back PanelThe connections and access panel on the on the back panel are illustrated in Figure 2.3.2-1 and defined asfollows:Antenna 1 Connector: Connects the NOMAD MXU’s internal LBT to the antenna located outside thebuilding.Antenna 2 Connector: Connects the NOMAD MXU’s internal LBT to the antenna located outside thebuilding.Antenna 3 Connector: Connects the NOMAD MXU’s internal LBT to the antenna located outside thebuilding.Antenna 4 Connector: Connects the NOMAD MXU’s internal LBT to the antenna located outside thebuilding.Line 1 Connector: RJ11 connector for connecting the NOMAD MXU to the Local PSTNLine 2 Connector: RJ11 connector for connecting the NOMAD MXU to the Local PSTNLine 3 Connector: RJ11 connector for connecting the NOMAD MXU to the Local PSTNLine 4 Connector: RJ11 connector for connecting the NOMAD MXU to the Local PSTNFan PowerSupplyFanSIM Access CoverAntenna 1 Antenna 2 Antenna 3 Antenna 4110-230VAC50/60 HZLine 1 Line 2Line 3 Line 4Dat/Fax#1Dat/Fax#4Dat/Fax#3Dat/Fax#2
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 24SIM Access Cover: Panel to allow access to the four Subscriber Identification Modules (SIM).Data/Fax #1: This connector is not used on the NOMAD MXU configuration.Data/Fax #2: This connector is not used on the NOMAD MXU configuration.Data/Fax #3: This connector is not used on the NOMAD MXU configuration.Data/Fax #4: This connector is not used on the NOMAD MXU configuration.110 – 230 VAC, 50/60 HZ Connector: External power connector. Refer to the power specifications inAppendix “C”.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 253 INSTALLATION3.1 OverviewThe administration and installation manuals are intended to identify and clearly describe the procedure for asuccessful installation and configuration of the NOMAD MXU. Before proceeding, the local installer andthe gateway personnel are highly encouraged to read both manuals to completely understand theresponsibilities of all parties.Figure 3.1-1: Installation OverviewThe installation of the NOMAD MXU and control monitors can proceed simultaneously in three areas asillustrated in figure 3.1-1.• The installation and configuration of the Gateway Control PC, ( Administrative Manual)• The installation and configuration of the Users Monitor PC. (Administrative Manual)• The installation and preliminary checkout of the NOMAD MXU equipment. (Installation Manual)Gateway Site ActivitesCompletePre-Installation Check ListReceive ShipmentRead the Administration ManualUser Site ActivitesCompletePre-Installation Check ListReceive ShipmentInstall MXU(Use Instal Manual)Console, Antennas, etc.Prelim Checkout(Use Install Manual)1. MXU Power Up2. Telephone Links3. Antenna Links InstallAdministration PCMXU OPERATON(Admin Manual)Install Monitor PC(Use Admin Manual)NOMAD MXUInitalization andAdministrationMXU Monitor(Admin manual)Request InitializationVerbalTelephone CallMODEMConnection RS232Read theInstallation ManualRead theAdministration Manual
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 26Both the administration and installation manuals should be reviewed and understood before installation isstarted.Once the installation and checkout of the equipment is completed, the initialization of the NOMAD MXUis completed and the unit is operational3.2 Install NOMAD MXU ConsoleRefer to the NOMAD MXU Installation Manual for installation of the console, antennas, etc at the userssite.3.3 Install Admin and Monitors PCs3.3.1 PC ConfigurationThe requirements for both the administration and monitor PCs are: a Pentium class PC at least 50 MB of free disk space, Microsoft NT 4.0 installed NT Service Pack ThreeCDROM drive is required for installing the NOMAD MCMHaynes type modem (if remoted from the NOMAD MXU’s site)Null Modem cable (if located at the NOMAD MXU Console site)3.3.2 Windows NT• Windows and Windows NT are registered trademarks of Microsoft Corporation.• This section does not cover the administration or use of the Microsoft Windows NT operating systemor the Microsoft Remote Access System. Please refer to Microsoft documentation and help files forinformation on these subjects.• It is assumed that the user of the NOMAD MXU Configuration Manager software is familiar with thegoals and structure of the Iridium Nomad program.3.3.3 Remote Access ServicesThe MCM software requires the Microsoft Remote Access Services package. Microsoft Service Pack 3must be applied to the PC AFTER the installation of RAS. The Remote Access Services package isincluded with NT 4.0. Service Pack 3 can be obtained from Microsoft. If the PC has already had ServicePack 3 installed, but RAS is not installed, then Service Pack 3 must be re-applied after the RAS installation.If the PC will not be directly connected to an NOMAD MXU, then it must have a modem installed and themodem must be configured to be a RAS device.The RAS configuration must include the NetBEUI protocol in its network configuration. Refer to theWindows NT online help for guidance.NT 4.0 comes with a direct cable driver, and this driver should also be configured to be a RAS device. Theserial port that is used for a direct connection must be configured with a baud rate of 115200, and with 8data bits, 1 stop bit, no parity. A direct connect cable must be used to connect the PC serial port to the
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 27control port on the NOMAD MXU. This cable must be a “null-modem” cable that supports hardwarehandshake; these cables are commonly sold for PC to PC connections. Refer to Appendix A for a pin outof the required cable type.3.4 Install MCM Program3.4.1 Install ProgramThe following procedure installs the NOMAD MXU Configuration Manager Software.1. Insert the MCM CDROM disk into the computer.2. Use the Start Menu Run command to execute Startup.exe on the CDROM.3. Follow the InstallShield directions.3.4.2 Execute MCM ProgramUse the Start->Programs Menu to select MCM_Admin.exe from within the installation directory ordouble-click on the Desktop Shortcut icon that is created by the installation.4 INITIALIZATION and OPERATION4.1 Creating a New NOMAD MXU ConfigurationThis section covers the data and activities involved in setting up a new NOMAD MXU configuration.4.1.1 Get Required InformationThe NOMAD MXU site or Nomad administration must be able to supply the following information foreach NOMAD MXU site to be configured:• If pooled time groups are to be used, then the number (1-3) of groups must be known. Theadministrator uses the Configure Groups menu to create the groups and assign descriptive names tothem.• The MSISDN (Iridium Phone Number) for each Iridium phone at the remote site must be known. Ifgroups are configured then the group membership (group 1,2,3 or no group) for each phone must besupplied. This data is entered into the configuration by means of the Add NOMAD ISU menu, whichallows the new MSISDN entry to be assigned to a group.• The phone number of the NOMAD MXU at the remote site must be known. This number is enteredinto the NOMAD MXU Connection Data Dial-up number box. It goes after any digits required foraccessing an outside line or to get to Long Distance, etc.• The type of signaling used at the remote site, Pulse or Tone, must be known. This is set in theNOMAD MXU Location box, using the Phone Type at Location buttons.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 28• The amount of Nomad program airtime that will be allowed per month for each phone should beknown.This information is entered into the Configuration for the NOMAD MXU, along with Gateway-supplieddata, such as the desired security configuration.The MCM program creates a unique 7-digit ID code when each MSISDN is entered. This ID number willthen be programmed into the Iridium Subscriber Unit (phone) SIM card, or given to the NOMAD MXUsite to be used by the callers. The code identifies the Nomad time charging account when a call is made.4.1.2 MCM New Configuration ScreenWhen the NOMAD MXU Configuration Manager program icon is double clicked, it will present thefollowing screen representing a blank configuration:Figure 4.1.2-1: New MCM Screen4.1.3 Enter Connection Data• Type in the NOMAD MXU Location text description. This can be any text that the administratorchooses.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 29• Click on the Tone or Pulse button, depending on the type of phone system to which the NOMADMXU will be connected.• Type in the phone number for the NOMAD MXU. This field (at the top of the NOMAD MXUConnection Data section) must contain any digits required to get an outside line, long distance, anynational code, area code and the local exchange number of the NOMAD MXU connection. This datais not required if the MCM PC will be directly connected to the NOMAD MXU via serial cable.• Select the Modem button for a phone connection or the Cable button for a direct connection to theNOMAD MXU. If you have not already saved the configuration, you will be prompted to save it witha descriptive name at this time.4.1.4 Enter Security DataIf the Timeout Enabled box is checked, the NOMAD MXU will shut down automatically when notcontacted by the MCM program (by doing a security poll, or configuration change, or diagnostic logretrieval, etc.). The number of days that the NOMAD MXU will continue to work without contact beforeshutting down is set in the Timeout fieldUncheck the NOMAD MXU Enabled box if you want to be able to configure the NOMAD MXU butrestrict it from answering calls from the Iridium phones until you enable it again.4.1.5 Configure Pooled Time GroupsUse the Define Groups button to bring down a dialog box, which will allow you to name and enable up tothree groups whose MSISDN members will share airtime.4.1.6 Enter MSISDNsUse the Add NOMAD ISU (Iridium Subscriber Unit) button to bring down a dialog box to enter theassigned MSISDN number and group (if any) for each Iridium phone at the NOMAD MXU site. As eachphone number is entered, a new entry will appear in the main screen display, and the unique Charge ID forthat phone will be allocated. If an MSISDN account is not a member of an airtime pooling group, leave theselection in the group selection box at NONE (see figure 8 ).4.1.7 Set Nomad Airtime Recharge If this site is to receive Nomad program airtime at the start of each month, enter the number of minutes tobe allocated for each phone and click on the Apply Recharge Minutes button. Phones that are members ofa pooled airtime group will be shown with the available pooled time for the whole group in the Rechargecolumn of the main display window.4.1.8 Allocate AirtimeIf paid airtime or partial month Nomad airtime is to be assigned to any group, double click on any groupmember entry in the main display window. Add the airtime minutes into the edit field for the desiredairtime category. Do the same for any non-group members that need to be changed.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 304.1.9 Save the Configuration DocumentWhen the initial configuration document is first saved, the administrator must assign it a unique name.This name should be descriptive, because the file names will be displayed in the Windows Open Dialoguewhen the administrator wants to contact a particular NOMAD MXU. The document will be assigned thepostfix ".NOMAD MXU". The file should be saved by use of the File…Save menu command wheneverthe configuration is changed. At certain critical times, the program will save the current configuration todisk with out the user’s request. If changes have not been saved when the file is closed, the user will beprompted to save the file before closing it.4.1.10 First NOMAD MXU Communication (Initialization)The first time that an NOMAD MXU is configured it must be initialized. Before this can be done, thefollowing conditions must be met:• The NOMAD MXU at the remote site is installed and has passed the installation tests.• The NOMAD MXU configuration has been created by the MCM program using the preceding steps.Click on the Connect menu and select Send Configuration to Unit. A message will appear to inform youthat the NOMAD MXU must be initialized. Click on the OK buttonThe MCM program connects to the NOMAD MXU and tells it to initialize. This is only done the first timethat the NOMAD MXU is configured. You will receive a success/fail message after the initializationrequest is acknowledged by the NOMAD MXU. If it is a success, then please wait the requested amountof time while the NOMAD MXU finishes initialization. Then repeat the steps above to send the displayedconfiguration to the NOMAD MXU. This time, the configuration is accepted and the NOMAD MXU willbegin to allow calls to be made (unless the configuration contains no current airtime or the securityparameter NOMAD MXU Enabled is turned off).4.1.11 Country Code SettingThe NOMAD MXU is shipped to the installation site with its telephone interface pre-configured for thedestination country. If the initialization is successful, the country code is correct and should never bechanged by the remotely connected NOMAD MXU. To display the configured country code, use theConnect menu commandGet Country Code from Unit after the initialization completes.If the unit does not initialize, it may be necessary to change the code on the NOMAD MXU by connectinga PC to the NOMAD MXU on site with a direct connect cable, and then using the Send Country Code toUnit command after selecting a different country from the drop down list in the Country Code display.This should be done only with advice from Nomad program support personnel. After the connection isworking, the remote MCM PC can us the Get Country Code from Unit command to display the correcttelephone configuration for the NOMAD MXU4.2 Administration Issues
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 314.2.1 Operator SecurityProblem: it is desirable to have different Nomad administration operators control separate groups ofNOMAD MXUs and it is required that each operator be restricted to just the assigned NOMAD MXUs.Solution: After the initial configuration (.NOMAD MXU) file has been saved and named, set the NT filepermissionsof the configuration (.NOMAD MXU) file and the subdirectory that has the same name as the configurationfile.Set the permissions to allow read/write access to only the assigned operator/logon and the NTAdministrator. Refer to the Files and Directories section for more information. Also check the NT helpfacility on the NT Start Menu for "files:permissions".4.2.2 Air Time Recharge ControlIf the Auto Recharge On box is checked, the NOMAD MXU will automatically credit the amount of timedisplayed under the "Recharge" heading for the group or phone to the "Nomad Time" account at the startof each month. If the administrator removes the check from this box and sends the configuration, therecharge will still be applied for one more month. If the Auto Recharge is turned on again, monthlyrecharge will resume until the expiration of the Nomad program.4.2.3 Maintaining Consistency with the NOMAD MXUIt is important to realize that the local configuration file and the actual airtime values on the remoteNOMAD MXU are only in agreement after the configuration has been read from the NOMAD MXU andsaved to the file by using theConnect…Get Configuration from Unit and the File…Save menu commands.The correct procedure for changing the NOMAD MXU configuration is to first upload the current valuesfrom the NOMAD MXU, make the desired changes and then send the updated configuration to theNOMAD MXU.4.2.4 Creating a Field UnitThe .NOMAD MXU file must be present in order to communicate with a specific NOMAD MXUinstallation. If more than one PC must be able to communicate with an NOMAD MXU, use the followingprocedure AFTER initializing the NOMAD MXU by sending a first configuration:1. Install the MCM software on the second PC (either the ADMIN or MONITOR versions, depending onwhether the second PC is allowed to change the configuration at the NOMAD MXU or only read it).Refer to the2. Copy the .NOMAD MXU file for the site to be administered from the original PC to the MCMdirectory on the second PC.3. Run the MCM program on the second PC and use the File..Open menu command to open the NOMADMXU file, and then save it. This will create the directories associated with the configuration file.4. Make any connection changes that are required. For example, if the second PC is a laptop that will bedirectly connected to the NOMAD MXU, change the NOMAD MXU Connection Data selectionfrom Modem to Cable.The PC is now ready to make connections to the NOMAD MXU. Repeat the above process for eachNOMAD MXU that the new PC will need to administer.4.3 Files and Directories
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 32The InstallShield installation process will allow the user to select the top-level directory for the MCM. Thefollowing directory tree will then be created whenever a new configuration is saved/named for the firsttime.The tree is shown together with typical files that may be created.MCM\ - Top directory created by InstallMCM_Admin.exe - The MCM programmxumgr.pbk - RAS phone book filePhoenixAZ.mxu - A saved Configuration filePhoenixAZ\ - Subdirectory for this NOMAD MXU configurationPhoenixAZ.txt - File created with the File…Create Text File menuDiagnostics\ - Subdirectory for diagnostics logsDiag1.txt - Uploaded diagnostic log.Errors\ -Subdirectory for error logsError1.txt -Uploaded error logSoftUpdate\ -Will exist if an update is included in the MCM distributionMXU\ -MXU SoftwareLBT\ -LBT Firmware5 TROUBLE SHOOTING GUIDELINES5.1 Troubleshooting VS. Security5.2 How TO Retrieving NOMAD MXU Diagnostics Files5.3 InitializationNOMAD MXU INITALIZATION PROBLEMSProblem(s) Possible Cause(s) Solution(s)
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 335.4 NOMAD MXU Operation ProblemsNOMAD MXU OPERATIONAL PROBLEMSProblem(s) Possible Cause(s) Solution(s)5.5 Administrative Station ProblemsNOMAD MXU ADMINISTRATION STATION PROBLEMSProblem(s) Possible Cause(s) Solution(s)5.6 Monitor Station ProblemsNOMAD MXU MONITOR STATION PROBLEMSProblem(s) Possible Cause(s) Solution(s)
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 345.7 NOMAD MXU System ProblemsIridium NOMAD ServiceEquipment: Iridium Satellite PhoneProblem(s) Possible Cause(s) Solution(s)The NOMAD Usercannot make or receiveany calls.The appropriate SIM (FDN) cardmay not be in the phone. Provide directions to the NOMADUser on how to put the appropriateSIM card in the phone. Refer tothe equipment Instruction Manual.Iridium homed #8817:The NOMAD User may be trying tomake a call while outside of his orher home country.Explain that the Iridium homed #8817network may only be accessed whenthe NOMAD User is making calls fromwithin his or her home country.Iridium homed #8817:The NOMAD User may be near acountry border (within 10 km or 6miles).Explain that the Iridium homed #8817calls may not go through when theNOMAD User is within 10 km of acountry border.The equipment may not be turnedon.ORThe battery may not be charged.Provide directions to the NOMAD Useron how the phone operates or on howto change the battery. Refer to theequipment Instruction Manual.The appropriate provisioningcontracts may not be activated.Check the Telephony Contract Windowto verify the appropriate contract isactivated. Verify the service packagesupports the desired use (e.g. servicepackage does not restrict outbound orinbound calls).The NOMAD User may bemisinformed about dialingdirections.Instruct the NOMAD User on thedialing directions for a specific area.Refer to the equipment InstructionManual.Potential network problem. Check the Network Advisory systemfor any information in the IridiumNetwork.Iridium NOMAD ServiceEquipment: Iridium Satellite PhoneProblem(s) Possible Cause(s) Solution(s)A structure or the environment(i.e. building, tunnel) may beblocking the line of sight betweenthe NOMAD User’s phone and thesatellite.Advise the NOMAD User to move toa new location so a visible line ofsight to the satellite can beestablished.The NOMAD Userexperiences difficultiesduring the call:• Transmissionproblems (cross-talk,echo, noise,static, distortion)• Dropped callsThe NOMAD User may bemisinformed about the dialingdirections.Instruct the NOMAD User on thedialing directions for a specific area.Refer to the equipment InstructionManual.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 35Iridium NOMAD ServiceEquipment: Iridium Satellite PhoneProblem(s) Possible Cause(s) Solution(s)Potential network problem. Check the Network Advisory systemfor any information in the IridiumNetwork.The NOMAD Userreceives anannouncement whenplacing a call.The NOMAD User may notunderstand the content of theannouncement.If the NOMAD User repeats theannouncement to the CustomerService Representative (CSR),explain it to the NOMAD User.The NOMAD User may notunderstand the purpose of theannouncement.Explain why announcements aredistributed.The NOMAD Usercannot use a featureassociated with theIridium service.The appropriate service package maynot be activated through the contract. Access the Telephony ContractWindow for the appropriate contractand verify the requested feature isavailable. Then verify theappropriate service package isselected.The NOMAD User may haveactivated or deactivated the service orfeature through a NOMAD UserService Session.Verify the NOMAD User did not turnoff the feature during a NOMAD UserService Session.The NOMAD Userexperiences thefollowing difficulty:• Equipment is lost,stolen, defective ordamaged.The equipment has beenmisplaced, stolen, or broken.Follow local policies and proceduresfor the handling of Lost, Stolen,Defective and Damaged equipment. Iridium NOMAD Service*Equipment: NOMAD MXUProblem(s) Possible Cause(s) Solution(s) NOMAD MobileAccess users unable tomake calls on thePSTN Pin code problem or user education SIM Card problem End user problemNOMAD MXU notworking Incorrect SIM cards installed inNOMAD MXUSim card failure in NOMAD MXUFaulty Hardware in NOMAD MXU NOMAD ISU board in NOMAD MXU Dialogic board in NOMAD MXUPC hardware in NOMAD MXUSite ProblemPSTN problem Interconnection issues
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 36 Iridium NOMAD Service*Equipment: NOMAD MXUProblem(s) Possible Cause(s) Solution(s)Protocol incompatibilities Network failures
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 37APPENDIX “A” - Null Modem CableThe diagram below shows the pin connections for a 9 pin direct connect cable used to connect a PC runningthe MCM program and an NOMAD MXU:TD (2) (2) TDRD (3) (3) RDRTS (7) (7) RTSCTS (8) (8) CTSDSR (6) (6) DSRGnd (5) (5) GndDCD (1) (1) DCDDTR (4) (4) DTRFigure 1 Cable PinoutAPPENDIX “B” - Example Create Text FileThe following is an example file produced with the Create Text File menu command.Iridium Nomad Configuration for: Phoenix, AZ Red CrossPrinted at: 01/04/99 20:02:22The Site is enabled. The Security Timeout is not enabled.The Site uses Tone Dial Method. The Site Dialup Number is:Automatic Recharge of Nomad Airtime is enabled.MSISDN Status ID Number Pooled Time Group Nomad Paid Recharge907 1 123 04441 Free 5381289 Emergency Medical 0120+0000 0000+0000 0145+0060907 1 123 04442 Free 3303364 Emergency Medical 0120+0000 0000+0000 0145+0060907 1 123 04444 Free 3833844 Disaster Relief 0000+0030 0000+0000 0000+0030907 1 123 04446 Free 1092135 NONE 0000+0045 0000+0000 0000+0000Appendix “C” – LogsNOTICE: This file has been newly created. This means:(1) The MXU may be new.(2) Log files may have been cleared manually or by a Gateway command.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 38(3) Backup files may have just been created.(4) Both redundant files of this log may have been corrupted.In the last case, if this is an Error (Diagnostics) Log, all datais also in the Activity Log. If this is an Activity Log, dataentries MAY HAVE BEEN LOST.Coordinated Universal Time is Thu Jan 28 13:23:22 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 13:28:15 1999Gateway connected via RS232 port.Coordinated Universal Time is Thu Jan 28 13:28:19 1999Remote Connection established. Computer:PC-EPB94 User: factoryCoordinated Universal Time is Thu Jan 28 15:03:56 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 15:10:37 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 15:18:02 1999Gateway connected via RS232 port.Coordinated Universal Time is Thu Jan 28 15:18:20 1999Remote Connection established. Computer:PC-EPB94 User: factoryCoordinated Universal Time is Thu Jan 28 15:22:03 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 15:27:29 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 15:33:11 1999LBT 2 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 15:33:11 1999LBT 1 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 15:33:11 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 15:33:12 1999LBT 3 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 15:58:25 1999SC2000 version register value: 0x00Coordinated Universal Time is Thu Jan 28 15:58:40 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 39LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 15:58:52 1999SC2000 version register value: 0x00Coordinated Universal Time is Thu Jan 28 15:59:46 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 15:59:48 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:00:01 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 16:00:01 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Thu Jan 28 16:00:01 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Thu Jan 28 16:00:01 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Thu Jan 28 16:00:01 1999LBT:1 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:00:13 1999LBT 2 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:00:18 1999LBT:2 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:00:37 1999LBT 3 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:00:44 1999LBT:3 is now ready for calls.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 40Coordinated Universal Time is Thu Jan 28 16:01:02 1999LBT 4 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:01:09 1999LBT:4 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:01:24 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:04:01 1999PBX:4 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:04:07 1999LBT 3 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:04:08 1999LBT 2 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:04:08 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:04:10 1999LBT 1 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:09:18 1999SC2000 version register value: 0x00Coordinated Universal Time is Thu Jan 28 16:09:47 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 16:10:01 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 16:10:02 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Thu Jan 28 16:11:25 1999SC2000 version register value: 0x00Coordinated Universal Time is Thu Jan 28 16:11:54 1999The MXU has been powered up.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 41Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 16:12:09 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 16:12:09 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Thu Jan 28 16:12:17 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:12:22 1999LBT:1 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:12:42 1999LBT 2 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:12:47 1999LBT:2 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:13:06 1999LBT 3 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:13:13 1999LBT:3 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:13:31 1999LBT 4 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:13:38 1999LBT:4 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:14:05 1999LBT 2 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:14:05 1999LBT 3 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:14:06 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:14:06 1999LBT 1 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:15:42 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 42LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:16:34 1999PBX:4 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:18:01 1999SC2000 version register value: 0x00Coordinated Universal Time is Thu Jan 28 16:18:30 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 16:18:45 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 16:18:45 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Thu Jan 28 16:18:53 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:18:58 1999LBT:1 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:19:18 1999LBT 2 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:19:23 1999LBT:2 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:19:42 1999LBT 3 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:19:49 1999LBT:3 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:20:07 1999LBT 4 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 16:20:14 1999LBT:4 is now ready for calls.Coordinated Universal Time is Thu Jan 28 16:20:49 1999LBT 4 signal level for successful call: 5
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 43Coordinated Universal Time is Thu Jan 28 16:20:57 1999Connected channel LBT:4 to PBX:1Coordinated Universal Time is Thu Jan 28 16:21:06 1999LBT 3 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:21:13 1999Connected channel LBT:3 to PBX:3Coordinated Universal Time is Thu Jan 28 16:21:22 1999LBT 2 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 16:21:29 1999Connected channel LBT:2 to PBX:2Coordinated Universal Time is Thu Jan 28 16:21:38 1999LBT 1 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:32:06 1999SC2000 version register value: 0x00Coordinated Universal Time is Thu Jan 28 23:33:06 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 23:33:18 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Thu Jan 28 23:33:18 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Thu Jan 28 23:33:18 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 23:33:19 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Thu Jan 28 23:33:28 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 23:33:33 1999LBT:1 is now ready for calls.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 44Coordinated Universal Time is Thu Jan 28 23:33:53 1999LBT 2 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 23:33:59 1999LBT:2 is now ready for calls.Coordinated Universal Time is Thu Jan 28 23:34:17 1999LBT 3 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 23:34:24 1999LBT:3 is now ready for calls.Coordinated Universal Time is Thu Jan 28 23:34:42 1999LBT 4 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Thu Jan 28 23:34:50 1999LBT:4 is now ready for calls.Coordinated Universal Time is Thu Jan 28 23:34:56 1999LBT 2 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:35:06 1999Connected channel LBT:2 to PBX:2Coordinated Universal Time is Thu Jan 28 23:35:22 1999LBT 1 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:35:35 1999Connected channel LBT:1 to PBX:1Coordinated Universal Time is Thu Jan 28 23:35:50 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:36:01 1999Connected channel LBT:4 to PBX:3Coordinated Universal Time is Thu Jan 28 23:36:16 1999LBT 3 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:36:59 1999PBX:4 is now ready for calls.Coordinated Universal Time is Thu Jan 28 23:37:23 1999LBT 2 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:37:34 1999Connected channel LBT:2 to PBX:2Coordinated Universal Time is Thu Jan 28 23:37:49 1999LBT 1 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:38:02 1999Connected channel LBT:1 to PBX:1Coordinated Universal Time is Thu Jan 28 23:38:17 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 45LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:38:28 1999Connected channel LBT:4 to PBX:4Coordinated Universal Time is Thu Jan 28 23:38:44 1999LBT 3 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:38:54 1999Connected channel LBT:3 to PBX:3Coordinated Universal Time is Thu Jan 28 23:42:26 1999LBT 2 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:42:36 1999Connected channel LBT:2 to PBX:2Coordinated Universal Time is Thu Jan 28 23:42:52 1999LBT 1 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:43:04 1999Connected channel LBT:1 to PBX:1Coordinated Universal Time is Thu Jan 28 23:43:21 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:43:31 1999Connected channel LBT:4 to PBX:4Coordinated Universal Time is Thu Jan 28 23:43:46 1999LBT 3 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:43:57 1999Connected channel LBT:3 to PBX:3Coordinated Universal Time is Thu Jan 28 23:48:19 1999LBT 2 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:48:29 1999Connected channel LBT:2 to PBX:2Coordinated Universal Time is Thu Jan 28 23:48:45 1999LBT 1 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:48:57 1999Connected channel LBT:1 to PBX:1Coordinated Universal Time is Thu Jan 28 23:49:14 1999LBT 4 signal level for successful call: 5Coordinated Universal Time is Thu Jan 28 23:49:24 1999Connected channel LBT:4 to PBX:4Coordinated Universal Time is Thu Jan 28 23:49:39 1999LBT 3 signal level for successful call: 5
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 46Coordinated Universal Time is Thu Jan 28 23:49:49 1999Connected channel LBT:3 to PBX:3Coordinated Universal Time is Fri Jan 29 00:17:32 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 00:17:32 1999Power Switched OffCoordinated Universal Time is Fri Jan 29 14:37:21 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 14:38:12 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 14:38:24 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 14:38:25 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 14:38:25 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 14:38:25 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 14:40:12 1999LBT 1 is not operationalCoordinated Universal Time is Fri Jan 29 14:40:12 1999LBT 2 is not operationalCoordinated Universal Time is Fri Jan 29 14:40:12 1999LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 14:40:13 1999LBT 4 is not operationalCoordinated Universal Time is Fri Jan 29 14:42:04 1999Power Interrupt Values: 31
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 47Coordinated Universal Time is Fri Jan 29 14:42:04 1999Power Switched OffCoordinated Universal Time is Fri Jan 29 14:44:10 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 14:44:59 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 14:45:11 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 14:45:11 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 14:45:12 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 14:45:12 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 14:46:59 1999LBT 1 is not operationalCoordinated Universal Time is Fri Jan 29 14:46:59 1999LBT 2 is not operationalCoordinated Universal Time is Fri Jan 29 14:46:59 1999LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 14:46:59 1999LBT 4 is not operationalCoordinated Universal Time is Fri Jan 29 14:47:24 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 14:47:24 1999Power Switched OffCoordinated Universal Time is Fri Jan 29 14:50:35 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 14:51:29 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 48The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 14:51:41 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 14:51:41 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 14:51:42 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 14:51:42 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 14:53:29 1999LBT 1 is not operationalCoordinated Universal Time is Fri Jan 29 14:53:29 1999LBT 2 is not operationalCoordinated Universal Time is Fri Jan 29 14:53:29 1999LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 14:53:30 1999LBT 4 is not operationalCoordinated Universal Time is Fri Jan 29 14:53:50 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 14:53:50 1999Power Switched OffCoordinated Universal Time is Fri Jan 29 14:56:18 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 14:57:07 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 49Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 14:57:19 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 14:57:20 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 14:57:20 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 14:57:21 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 14:58:39 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 14:58:39 1999Power Switched OffCoordinated Universal Time is Fri Jan 29 15:00:47 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 15:01:36 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 15:01:48 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 15:01:49 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 15:01:49 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 15:01:50 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 50Coordinated Universal Time is Fri Jan 29 15:03:36 1999LBT 1 is not operationalCoordinated Universal Time is Fri Jan 29 15:03:36 1999LBT 2 is not operationalCoordinated Universal Time is Fri Jan 29 15:03:36 1999LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 15:03:37 1999LBT 4 is not operationalCoordinated Universal Time is Fri Jan 29 15:04:10 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 15:04:10 1999Power Switched OffCoordinated Universal Time is Fri Jan 29 15:10:15 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 15:11:04 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 15:11:18 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 15:11:18 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 15:11:19 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 15:11:19 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 15:11:54 1999Gateway connected via RS232 port.Coordinated Universal Time is Fri Jan 29 15:13:04 1999LBT 1 is not operationalCoordinated Universal Time is Fri Jan 29 15:13:06 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 51LBT 2 is not operationalCoordinated Universal Time is Fri Jan 29 15:13:06 1999LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 15:13:06 1999LBT 4 is not operationalCoordinated Universal Time is Fri Jan 29 15:13:07 1999Remote Access failed to log on.Coordinated Universal Time is Fri Jan 29 15:13:31 1999Gateway connected via RS232 port.Coordinated Universal Time is Fri Jan 29 15:17:53 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 15:17:53 1999Power Switched OffCoordinated Universal Time is Fri Jan 29 15:20:25 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 15:21:16 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 15:21:28 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 15:21:29 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 15:21:29 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 15:21:29 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 15:23:16 1999LBT 1 is not operationalCoordinated Universal Time is Fri Jan 29 15:23:16 1999LBT 2 is not operational
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 52Coordinated Universal Time is Fri Jan 29 15:23:16 1999LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 15:23:17 1999LBT 4 is not operationalCoordinated Universal Time is Fri Jan 29 15:26:46 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 15:26:46 1999Power Switched OffCoordinated Universal Time is Fri Jan 29 15:28:51 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 15:29:43 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 15:29:55 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 15:29:56 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 15:29:56 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 15:29:56 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 15:31:43 1999LBT 1 is not operationalCoordinated Universal Time is Fri Jan 29 15:31:43 1999LBT 2 is not operationalCoordinated Universal Time is Fri Jan 29 15:31:43 1999LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 15:31:43 1999LBT 4 is not operational
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 53Coordinated Universal Time is Fri Jan 29 16:04:51 1999Gateway connected via RS232 port.Coordinated Universal Time is Fri Jan 29 16:05:00 1999Remote Connection established. Computer:MXUSITE1 User: AdministratorCoordinated Universal Time is Fri Jan 29 16:09:22 1999Gateway connected via RS232 port.Coordinated Universal Time is Fri Jan 29 16:09:43 1999Remote Connection established. Computer:MXUSITE1 User: AdministratorCoordinated Universal Time is Fri Jan 29 16:14:15 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 16:14:15 1999Power Switched OffCoordinated Universal Time is Fri Jan 29 23:25:50 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 23:26:39 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 23:26:54 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 23:26:54 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 23:26:54 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 23:26:54 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 23:27:01 1999LBT 1 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Fri Jan 29 23:28:39 1999LBT 2 is not operationalCoordinated Universal Time is Fri Jan 29 23:28:39 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 54LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 23:28:39 1999LBT 4 is not operationalCoordinated Universal Time is Fri Jan 29 23:31:38 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 23:32:02 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 23:32:16 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 23:32:16 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 23:32:24 1999LBT 1 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Fri Jan 29 23:34:02 1999LBT 2 is not operationalCoordinated Universal Time is Fri Jan 29 23:34:02 1999LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 23:34:02 1999LBT 4 is not operationalCoordinated Universal Time is Fri Jan 29 23:34:32 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 23:34:42 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 23:34:51 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 23:35:01 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 23:37:02 1999LBT 1 SW Version = 0x00 0x00 0x00
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 55Coordinated Universal Time is Fri Jan 29 23:37:10 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 23:41:40 1999SC2000 version register value: 0x00Coordinated Universal Time is Fri Jan 29 23:42:31 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 23:42:43 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Fri Jan 29 23:42:43 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Fri Jan 29 23:42:44 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 23:42:44 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 23:42:53 1999LBT 1 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Fri Jan 29 23:44:31 1999LBT 2 is not operationalCoordinated Universal Time is Fri Jan 29 23:44:31 1999LBT 3 is not operationalCoordinated Universal Time is Fri Jan 29 23:44:31 1999LBT 4 is not operationalCoordinated Universal Time is Fri Jan 29 23:45:15 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 23:45:23 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 23:45:30 1999Power Interrupt Values: 31
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 56Coordinated Universal Time is Fri Jan 29 23:45:35 1999Power Interrupt Values: 31Coordinated Universal Time is Fri Jan 29 23:46:47 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Fri Jan 29 23:51:47 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Fri Jan 29 23:56:48 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Sat Jan 30 00:01:48 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Sat Jan 30 00:06:48 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Sat Jan 30 00:11:48 1999LBT 1 SW Version = 0x00 0x00 0x00Coordinated Universal Time is Sat Jan 30 00:11:50 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:30:03 1999SC2000 version register value: 0x00Coordinated Universal Time is Sat Jan 30 00:30:52 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Sat Jan 30 00:31:06 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Sat Jan 30 00:31:06 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Sat Jan 30 00:31:07 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Sat Jan 30 00:31:07 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Sat Jan 30 00:31:14 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 57LBT 1 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Sat Jan 30 00:31:47 1999LBT:1 is now ready for calls.Coordinated Universal Time is Sat Jan 30 00:32:52 1999LBT 2 is not operationalCoordinated Universal Time is Sat Jan 30 00:32:52 1999LBT 3 is not operationalCoordinated Universal Time is Sat Jan 30 00:32:52 1999LBT 4 is not operationalCoordinated Universal Time is Sat Jan 30 00:33:20 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:33:24 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:33:28 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:35:42 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:35:46 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:35:50 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:36:42 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:39:22 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:42:56 1999SC2000 version register value: 0x00Coordinated Universal Time is Sat Jan 30 00:46:21 1999SC2000 version register value: 0x00Coordinated Universal Time is Sat Jan 30 00:47:13 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 58Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Sat Jan 30 00:47:25 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Sat Jan 30 00:47:25 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Sat Jan 30 00:47:26 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Sat Jan 30 00:47:26 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Sat Jan 30 00:49:13 1999LBT 1 is not operationalCoordinated Universal Time is Sat Jan 30 00:49:13 1999LBT 2 is not operationalCoordinated Universal Time is Sat Jan 30 00:49:13 1999LBT 3 is not operationalCoordinated Universal Time is Sat Jan 30 00:49:14 1999LBT 4 is not operationalCoordinated Universal Time is Sat Jan 30 00:49:41 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:50:50 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:50:55 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:50:59 1999Power Interrupt Values: 31Coordinated Universal Time is Sat Jan 30 00:51:07 1999LBT 1 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Sat Jan 30 00:51:14 1999LBT:1 is now ready for calls.Coordinated Universal Time is Sat Jan 30 00:55:23 1999SC2000 version register value: 0x00Coordinated Universal Time is Sat Jan 30 00:56:12 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 59LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Sat Jan 30 00:56:24 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Sat Jan 30 00:56:25 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Sat Jan 30 00:56:25 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Sat Jan 30 00:56:26 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Sat Jan 30 00:56:34 1999LBT 1 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Sat Jan 30 00:56:41 1999LBT:1 is now ready for calls.Coordinated Universal Time is Sat Jan 30 00:58:12 1999LBT 2 is not operationalCoordinated Universal Time is Sat Jan 30 00:58:12 1999LBT 3 is not operationalCoordinated Universal Time is Sat Jan 30 00:58:12 1999LBT 4 is not operationalCoordinated Universal Time is Sat Jan 30 00:59:51 1999Power Interrupt Values: 31Coordinated Universal Time is Mon Feb 01 16:16:14 1999Power Interrupt Values: 31Coordinated Universal Time is Mon Feb 01 16:16:19 1999Power Interrupt Values: 31Coordinated Universal Time is Tue Feb 02 18:56:01 1999SC2000 version register value: 0x00Coordinated Universal Time is Tue Feb 02 18:56:50 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 60LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Tue Feb 02 18:57:05 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Tue Feb 02 18:57:05 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Tue Feb 02 18:57:05 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Tue Feb 02 18:57:05 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Tue Feb 02 18:58:44 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Tue Feb 02 18:58:50 1999LBT 1 is not operationalCoordinated Universal Time is Tue Feb 02 18:58:50 1999LBT 2 is not operationalCoordinated Universal Time is Tue Feb 02 18:58:50 1999LBT 3 is not operationalCoordinated Universal Time is Tue Feb 02 18:58:53 1999LBT:4 is now ready for calls.Coordinated Universal Time is Tue Feb 02 19:15:03 1999SC2000 version register value: 0x00Coordinated Universal Time is Tue Feb 02 19:15:27 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Tue Feb 02 19:15:41 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 61Coordinated Universal Time is Tue Feb 02 19:15:41 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Tue Feb 02 19:17:21 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Tue Feb 02 19:17:27 1999LBT 1 is not operationalCoordinated Universal Time is Tue Feb 02 19:17:27 1999LBT 2 is not operationalCoordinated Universal Time is Tue Feb 02 19:17:27 1999LBT 3 is not operationalCoordinated Universal Time is Tue Feb 02 19:17:30 1999LBT:4 is now ready for calls.Coordinated Universal Time is Tue Feb 02 19:18:09 1999Power Interrupt Values: 31Coordinated Universal Time is Tue Feb 02 19:19:26 1999Power Interrupt Values: 31Coordinated Universal Time is Tue Feb 02 19:19:48 1999Power Interrupt Values: 31Coordinated Universal Time is Tue Feb 02 19:21:04 1999Power Interrupt Values: 31Coordinated Universal Time is Tue Feb 02 19:22:21 1999Power Interrupt Values: 31Coordinated Universal Time is Tue Feb 02 20:05:57 1999SC2000 version register value: 0x00Coordinated Universal Time is Tue Feb 02 20:06:20 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Tue Feb 02 20:06:35 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 62Coordinated Universal Time is Tue Feb 02 20:06:35 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Tue Feb 02 20:08:15 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Tue Feb 02 20:08:20 1999LBT 1 is not operationalCoordinated Universal Time is Tue Feb 02 20:08:20 1999LBT 2 is not operationalCoordinated Universal Time is Tue Feb 02 20:08:20 1999LBT 3 is not operationalCoordinated Universal Time is Tue Feb 02 20:08:24 1999LBT:4 is now ready for calls.Coordinated Universal Time is Tue Feb 02 22:12:07 1999SC2000 version register value: 0x00Coordinated Universal Time is Tue Feb 02 22:12:31 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Tue Feb 02 22:12:45 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Tue Feb 02 22:12:46 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Tue Feb 02 22:14:25 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Tue Feb 02 22:14:31 1999LBT 1 is not operationalCoordinated Universal Time is Tue Feb 02 22:14:31 1999LBT 2 is not operationalCoordinated Universal Time is Tue Feb 02 22:14:31 1999LBT 3 is not operationalCoordinated Universal Time is Tue Feb 02 22:14:34 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 63LBT:4 is now ready for calls.Coordinated Universal Time is Wed Feb 03 16:57:00 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 16:57:24 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 16:57:38 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 16:57:38 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 16:58:19 1999Gateway connected via RS232 port.Coordinated Universal Time is Wed Feb 03 16:59:18 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Wed Feb 03 16:59:28 1999LBT 1 is not operationalCoordinated Universal Time is Wed Feb 03 16:59:28 1999LBT 2 is not operationalCoordinated Universal Time is Wed Feb 03 16:59:33 1999LBT 3 is not operationalCoordinated Universal Time is Wed Feb 03 16:59:50 1999Remote Access failed to log on.Coordinated Universal Time is Wed Feb 03 17:00:08 1999Gateway connected via RS232 port.Coordinated Universal Time is Wed Feb 03 17:00:14 1999LBT:4 is now ready for calls.Coordinated Universal Time is Wed Feb 03 17:00:23 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:01:41 1999SC2000 version register value: 0x00
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 64Coordinated Universal Time is Wed Feb 03 17:01:44 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:02:14 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 17:02:38 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:02:52 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:02:53 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 17:03:12 1999Gateway connected via RS232 port.Coordinated Universal Time is Wed Feb 03 17:06:48 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 17:07:40 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 65Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:07:55 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:07:55 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 17:07:55 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Wed Feb 03 17:07:55 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Wed Feb 03 17:08:30 1999Gateway connected via RS232 port.Coordinated Universal Time is Wed Feb 03 17:09:34 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Wed Feb 03 17:09:40 1999LBT 1 is not operationalCoordinated Universal Time is Wed Feb 03 17:09:44 1999LBT 2 is not operationalCoordinated Universal Time is Wed Feb 03 17:09:44 1999LBT 3 is not operationalCoordinated Universal Time is Wed Feb 03 17:09:44 1999LBT 4 is not operationalCoordinated Universal Time is Wed Feb 03 17:10:06 1999Remote Access failed to log on.Coordinated Universal Time is Wed Feb 03 17:10:24 1999Gateway connected via RS232 port.Coordinated Universal Time is Wed Feb 03 17:10:33 1999LBT:4 is now ready for calls.Coordinated Universal Time is Wed Feb 03 17:10:49 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:11:02 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:11:14 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:11:25 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 66Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:11:50 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:11:55 1999Remote Access failed to log on.Coordinated Universal Time is Wed Feb 03 17:12:16 1999Gateway connected via RS232 port.Coordinated Universal Time is Wed Feb 03 17:13:39 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 17:13:43 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:14:19 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 17:14:43 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:14:57 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:14:57 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 17:16:37 1999LBT 4 SW Version = 0xB6 0x01 0x03
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 67Coordinated Universal Time is Wed Feb 03 17:16:43 1999LBT 1 is not operationalCoordinated Universal Time is Wed Feb 03 17:16:43 1999LBT 2 is not operationalCoordinated Universal Time is Wed Feb 03 17:16:43 1999LBT 3 is not operationalCoordinated Universal Time is Wed Feb 03 17:16:46 1999LBT:4 is now ready for calls.Coordinated Universal Time is Wed Feb 03 17:44:06 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 17:49:34 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 17:50:23 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:50:35 1999MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMTCoordinated Universal Time is Wed Feb 03 17:50:35 1999MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22Coordinated Universal Time is Wed Feb 03 17:50:36 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:50:36 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 17:52:17 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Wed Feb 03 17:52:23 1999LBT 1 is not operationalCoordinated Universal Time is Wed Feb 03 17:52:23 1999LBT 2 is not operational
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 68Coordinated Universal Time is Wed Feb 03 17:52:23 1999LBT 3 is not operationalCoordinated Universal Time is Wed Feb 03 17:52:26 1999LBT:4 is now ready for calls.Coordinated Universal Time is Wed Feb 03 17:52:55 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:53:06 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:54:04 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:55:26 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:56:00 1999Power Interrupt Values: 31Coordinated Universal Time is Wed Feb 03 17:58:53 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 17:59:16 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:59:31 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:59:31 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 18:01:11 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Wed Feb 03 18:01:16 1999LBT 1 is not operationalCoordinated Universal Time is Wed Feb 03 18:01:16 1999LBT 2 is not operationalCoordinated Universal Time is Wed Feb 03 18:01:17 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 69LBT 3 is not operationalCoordinated Universal Time is Wed Feb 03 18:01:19 1999LBT:4 is now ready for calls.Coordinated Universal Time is Wed Feb 03 22:07:30 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 22:08:21 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 22:10:51 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 22:11:15 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 22:11:29 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 22:11:30 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 22:13:09 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Wed Feb 03 22:13:15 1999LBT 1 is not operationalCoordinated Universal Time is Wed Feb 03 22:13:15 1999LBT 2 is not operational
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 70Coordinated Universal Time is Wed Feb 03 22:13:15 1999LBT 3 is not operationalCoordinated Universal Time is Wed Feb 03 22:13:18 1999LBT:4 is now ready for calls.Coordinated Universal Time is Wed Feb 03 22:22:19 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 22:23:39 1999SC2000 version register value: 0x00Coordinated Universal Time is Wed Feb 03 22:24:02 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 22:24:17 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 22:24:17 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 22:25:57 1999LBT 4 SW Version = 0xB6 0x01 0x03Coordinated Universal Time is Wed Feb 03 22:26:02 1999LBT 1 is not operationalCoordinated Universal Time is Wed Feb 03 22:26:02 1999LBT 2 is not operationalCoordinated Universal Time is Wed Feb 03 22:26:02 1999LBT 3 is not operationalCoordinated Universal Time is Wed Feb 03 22:26:06 1999LBT:4 is now ready for calls.NOTICE: This file has been newly created. This means:(1) The MXU may be new.(2) Log files may have been cleared manually or by a Gateway command.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 71(3) Backup files may have just been created.(4) Both redundant files of this log may have been corrupted.In the last case, if this is an Error (Diagnostics) Log, all datais also in the Activity Log. If this is an Activity Log, dataentries MAY HAVE BEEN LOST.Coordinated Universal Time is Thu Jan 28 15:58:40 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 15:59:46 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 16:00:01 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 16:00:01 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Thu Jan 28 16:09:47 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 72Coordinated Universal Time is Thu Jan 28 16:10:01 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 16:10:02 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Thu Jan 28 16:11:54 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 16:12:08 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 16:12:09 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Thu Jan 28 16:18:30 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 16:18:45 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 16:18:45 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Thu Jan 28 23:33:05 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 73LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 is available.Dialogic Channel 2 is available.Dialogic Channel 3 is available.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Thu Jan 28 23:33:18 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Thu Jan 28 23:33:19 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 14:38:12 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 14:38:25 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 14:38:25 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 14:44:59 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 14:45:11 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 74Coordinated Universal Time is Fri Jan 29 14:45:12 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 14:51:29 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 14:51:42 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 14:51:42 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 14:57:07 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 14:57:20 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 14:57:20 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 15:01:36 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 75Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 15:01:49 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 15:01:49 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 15:11:04 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 15:11:18 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 15:11:18 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 15:21:16 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 15:21:29 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 15:21:29 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 15:29:43 1999The MXU has been powered up.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 76Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 15:29:56 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 15:29:56 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 23:26:39 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 23:26:53 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 23:26:54 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 23:32:02 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 77Coordinated Universal Time is Fri Jan 29 23:32:16 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 23:32:16 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Fri Jan 29 23:42:31 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Fri Jan 29 23:42:43 1999D:\mxusrc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Fri Jan 29 23:42:44 1999D:\mxusrc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Sat Jan 30 00:30:52 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Sat Jan 30 00:31:06 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Sat Jan 30 00:31:07 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Sat Jan 30 00:47:13 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 78LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Sat Jan 30 00:47:26 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Sat Jan 30 00:47:26 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Sat Jan 30 00:56:12 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Sat Jan 30 00:56:25 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Sat Jan 30 00:56:25 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Tue Feb 02 18:56:50 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Tue Feb 02 18:57:05 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Tue Feb 02 18:57:05 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 79Coordinated Universal Time is Tue Feb 02 19:15:27 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Tue Feb 02 19:15:41 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Tue Feb 02 19:15:41 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Tue Feb 02 20:06:20 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Tue Feb 02 20:06:34 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Tue Feb 02 20:06:35 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Tue Feb 02 22:12:31 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 80********************Coordinated Universal Time is Tue Feb 02 22:12:45 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Tue Feb 02 22:12:45 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 16:57:24 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 16:57:38 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 16:57:38 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 17:01:44 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:02:38 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 81Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:02:52 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:02:52 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 17:07:40 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:07:54 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:07:55 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 17:13:43 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:14:43 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 82Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:14:57 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:14:57 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 17:50:23 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:50:35 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:50:36 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 17:59:16 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 17:59:31 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 17:59:31 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 83Coordinated Universal Time is Wed Feb 03 22:08:21 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 22:11:15 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 22:11:29 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 22:11:30 1999D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!Coordinated Universal Time is Wed Feb 03 22:24:02 1999The MXU has been powered up.Results of Initialization:LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.LBT Interface startup complete. Waiting for LBT Response.Dialogic Channel 1 did not detect dial tone.Dialogic Channel 2 did not detect dial tone.Dialogic Channel 3 did not detect dial tone.Dialogic Channel 4 did not detect dial tone.********************Coordinated Universal Time is Wed Feb 03 22:24:17 1999D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master!Coordinated Universal Time is Wed Feb 03 22:24:17 1999
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 84D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master!APPENDIX “C” – SpecificationsDimensions 19.0”W X 16.0” L X 5.25”HWeight less than 20 lbs. Operating Temperature +15oC to +35oC Storage Temperature -20oC to +60oC Humidity 80% RH at 40oC Service Life 5 years Power 110/230 VAC, 50/60 Hertz Interface to PBX/PSTN Four analog phone lines MXU shall emulate the following phone types: (UK), BAPT 223 ZV5 (Germany), B 11-23A (France), FCC Part 68 (USA), TS-002(Australia), JATE (Japan) Operating (transmit and receive) 1616 - 1625.5 MHz OSC Stability +/- 1.5 ppm Duplexing Method Time Division Duplex Multiplexing Method TDMA/FDMA Link Margin (w/exterior Antenna) 12.5 dB average Sensitivity -117.9 dBm (Measured at the RF Connector) TX Spurs General -71 dBc(Measured at the RF Connector) TX Spurs GNSS 1559-1605 MHz -91dBc (Measured at the RF Connector) TX Noise GNSS 1559-1605 MHz -81dBc (Measured at the RF Connector) Distance between Antennas 3 feet Min
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 85
DRAFT COPYNOMAD MXU Administration Manual 3:33 PM 02/12/99DRAFT COPY 86APPENDIX “D” - Warranty

Navigation menu