General Dynamics Mission Systems MXU2000N-R Fixed Satellite Tranceiver User Manual MXUEXH7A
General Dynamics C4 Systems Fixed Satellite Tranceiver MXUEXH7A
Contents
- 1. Exhibit 7A Administration Manual
- 2. Exhibit 7B Installation Manual
Exhibit 7A Administration Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 23401 |
| Application ID | fzgyJAu4qtgp3DHSpFW3Bw== |
| Document Description | Exhibit 7A Administration Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.8kB (247552 bits) |
| Date Submitted | 1999-02-12 00:00:00 |
| Date Available | 1999-04-05 00:00:00 |
| Creation Date | 1999-02-12 15:43:05 |
| Producing Software | Acrobat Distiller 3.01 for Windows |
| Document Lastmod | 1999-02-12 15:47:48 |
| Document Title | Microsoft Word - MXUEXH7A.doc |
| Document Creator | Windows NT 4.0 |
APPLICANT: MOTOROLA GSTG FCC ID: MIJMXU2000N-R DRAFT OF ADMINISTRATION MANUAL EXHIBIT 7A DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 REVISIONS ASTERISK INDICATES DATA WHICH IS NONMANDATORY FOR INFORMATION ONLY *APPLICATION NEXT ASSY USED ON SEE SEPARATE WIRE LIST YES PROJ. NO. DWN BY 14114 Ken Schmidt UNLESS OTHERWISE SPECIFIED: REV XA XB NO DESCRIPTION Engineering Red Line Control DATE 3 Feb 99 APPROVED KHS SEE SEPARATE PARTS LIST YES NO X INTERPRET DRAWING IN ACCORDANCE WITH STANDARDS LISTED IN DOD-STD-100. DOC CHK BY SCOTTS DALE, AZ 85252- 1417 Space and Systems Technology Group DSGN CHK BY ALL DIMENSIONS ARE INCHES. DWG IS END PROD. CONTR NO. MXU NOMAD ADMINISTRATION MANUAL ISSUED TOLERANCES: 2 PLACE DEC ± N/A 3 PLACE DEC ± N/A MATL APVD MFG APVD SIZE ENGRG APVD HOLE DIA N/A ANGLE ± N/A CAGE CODE DRAWING NO. 94990 CUST APVD NA SCALE NONE WT. NA SHEET 1 OF DRAFT COPY DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 NOMAD MXU Configuration Manager (MCM) Software License Agreement (on the CDs) NOMAD MXU Application Software License Agreement Technical Support Numbers DRAFT COPY DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Version Version Date Date Name name Reason Reason Change DRAFT COPY DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 1. TABLE OF CONTENTS INTRODUCTION................................................................................................................................. 7 1.1 Purpose............................................................................................................................................ 7 1.2 Acronyms and Definitions .............................................................................................................. 7 1.3 Safety .............................................................................................................................................. 7 NOMAD SYSTEM OVERVIEW ........................................................................................................ 9 2.1 System Description ......................................................................................................................... 9 2.2 NOMAD MXU Configuration Manager (MCM) ......................................................................... 10 2.2.1 MCM Overview .................................................................................................................... 10 2.2.2 MCM Features ...................................................................................................................... 11 2.2.2.1 Main Screen ...................................................................................................................... 11 2.2.2.2 Date Fields ........................................................................................................................ 11 2.2.2.3 NOMAD MXU Location Information .............................................................................. 12 2.2.2.4 NOMAD MXU Connection Data ..................................................................................... 12 2.2.2.5 Nomad Airtime Recharge ................................................................................................. 13 2.2.2.6 Security Configuration ...................................................................................................... 14 2.2.2.7 Define Groups ................................................................................................................... 15 2.2.2.8 Selecting a Group to Display ............................................................................................ 16 2.2.2.9 Add NOMAD ISU Button ................................................................................................ 16 2.2.2.10 NOMAD ISU Display Window .................................................................................... 17 2.2.2.11 Changing Entries........................................................................................................... 17 2.2.2.12 Menu Bar ...................................................................................................................... 18 2.2.2.12.1 File Menu.................................................................................................................. 18 2.2.2.12.2 Connect Menu........................................................................................................... 19 2.2.2.12.3 Diagnostics Menu ..................................................................................................... 19 2.2.2.12.4 Security Menu........................................................................................................... 20 2.2.2.12.5 Support Menu ........................................................................................................... 21 2.2.2.13 Display / File Options ................................................................................................... 21 2.3 NOMAD Console ......................................................................................................................... 21 2.3.1 Front Panel ............................................................................................................................ 22 2.3.2 Back Panel ............................................................................................................................ 23 INSTALLATION................................................................................................................................ 25 3.1 Overview....................................................................................................................................... 25 3.2 Install NOMAD MXU Console .................................................................................................... 26 3.3 Install Admin and Monitors PCs.................................................................................................. 26 3.3.1 PC Configuration .................................................................................................................. 26 3.3.2 Windows NT ......................................................................................................................... 26 3.3.3 Remote Access Services ....................................................................................................... 26 3.4 Install MCM Program ................................................................................................................... 27 3.4.1 Install Program...................................................................................................................... 27 3.4.2 Execute MCM Program ........................................................................................................ 27 INITIALIZATION and OPERATION ............................................................................................. 27 4.1 Creating a New NOMAD MXU Configuration ............................................................................ 27 4.1.1 Get Required Information ..................................................................................................... 27 4.1.2 MCM New Configuration Screen ......................................................................................... 28 4.1.3 Enter Connection Data .......................................................................................................... 28 4.1.4 Enter Security Data ............................................................................................................... 29 4.1.5 Configure Pooled Time Groups ............................................................................................ 29 4.1.6 Enter MSISDNs .................................................................................................................... 29 4.1.7 Set Nomad Airtime Recharge ............................................................................................... 29 4.1.8 Allocate Airtime.................................................................................................................... 29 4.1.9 Save the Configuration Document ........................................................................................ 30 4.1.10 First NOMAD MXU Communication (Initialization) ......................................................... 30 DRAFT COPY DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 4.1.11 Country Code Setting............................................................................................................ 30 4.2 Administration Issues.................................................................................................................... 30 4.2.1 Operator Security .................................................................................................................. 31 4.2.2 Air Time Recharge Control................................................................................................... 31 4.2.3 Maintaining Consistency with the NOMAD MXU............................................................... 31 4.2.4 Creating a Field Unit............................................................................................................. 31 4.3 Files and Directories ..................................................................................................................... 31 TROUBLE SHOOTING GUIDELINES .......................................................................................... 32 5.1 Troubleshooting VS. Security....................................................................................................... 32 5.2 How TO Retrieving NOMAD MXU Diagnostics Files ................................................................ 32 5.3 Initialization .................................................................................................................................. 32 5.4 NOMAD MXU Operation Problems ............................................................................................ 33 5.5 Administrative Station Problems .................................................................................................. 33 5.6 Monitor Station Problems ............................................................................................................. 33 5.7 NOMAD MXU System Problems ................................................................................................ 34 APPENDIX “A” - Null Modem Cable ...................................................................................................... 37 APPENDIX “B” - Example Create Text File ........................................................................................... 37 APPENDIX “C” – Specifications............................................................................................................... 84 APPENDIX “D” - Warranty...................................................................................................................... 86 DRAFT COPY DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 TABLE OF FIGURES Figure 2.1-1: NOMAD System....................................................................................................................... 9 Figure 2.2.2.1-1: MCM Main Screen........................................................................................................... 11 Figure 2.2.2.3-1: NOMAD MXU Location Information ............................................................................. 12 Figure 2.2.2.4-1: NOMAD MXU Connection Data Fields........................................................................... 12 Figure 2.2.2.5-1: Nomad Airtime Recharge Fields...................................................................................... 13 Figure 2.2.2.6-1: Security Configuration Fields .......................................................................................... 14 Figure 2.2.2.7-1: Pooled Airtime Group Fields ........................................................................................... 15 Figure 2.2.2.8-1: Group Selection for Display............................................................................................. 16 Figure 2.2.2.9-1: New NOMAD ISU Data Fields........................................................................................ 16 Figure 2.2.2.10-1: NOMAD ISU Display Window ..................................................................................... 17 Figure 2.2.2.11-1: Change Entry Fields ....................................................................................................... 18 Figure 2.2.2.12.1-1: File Menu .................................................................................................................... 18 Figure 2.2.2.12.2-1: Connect Menu ............................................................................................................. 19 Figure 2.2.2.12.3-1: Diagnostics Menu........................................................................................................ 19 Figure 2.2.2.12.3-2: LBT Update Selection................................................................................................. 20 Figure 2.2.2.12.4-1: Security Menu ............................................................................................................. 20 Figure 2.2.2.12.5-1: Support Menu.............................................................................................................. 21 Figure 2.2.2.13-1: Group to Display ............................................................................................................. 21 Figure 3.2-1: NOMAD Console.................................................................................................................... 22 Figure 3.2.1-1: NOMAD Front Panel ........................................................................................................... 22 Figure 2.3.2-1: Nomad Back Panel............................................................................................................... 23 Figure 3.1-1: Installation Overview .............................................................................................................. 25 Figure 4.1.2-1: New MCM Screen............................................................................................................... 28 DRAFT COPY DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 1 INTRODUCTION 1.1 Purpose This administration manual has been written for the following purposes: 1. Administration of the NOMAD MXU from a remote location over PSTN telephone lines. 2. Administration of the NOMAD MXU from a local location over the RS232 port. 3. Monitoring only of the NOMAD MXU from a remote location over PSTN telephone lines. 4. Monitoring only of the NOMAD MXU from a local location over the RS232 port. 1.2 Acronyms and Definitions NOMAD System NOMAD MXU MXU NOMAD ISU ISU PC Personal Computer CDR Call Detail Record CD ROM Compact Disk Read Only Memory CFB Call Forward on subscriber Busy DTMF Dual tone Multi-Frequency ISU Iridium Subscriber Unit LBT L Band Transceiver LEO Low Earth Orbit ISDM Integrated Service Digital network MCM MXU Configuration Management MSISDN Mobile Service Integrated Service Digital Network MXU MultiExchange Unit PBX Public Branch Exchange PC Personal Computer PSTN Public Switched Telephone Network SIM Subscriber Identity Module 1.3 Safety The NOMAD MXU has been designed and tested to comply with UL 1950, EN 60950 and IEC 950 safety standards. These standards are accepted in most of the industrialized world and are considered defacto standards worldwide. Warnings, cautions, and notes listed below are used in various sections of the Installation and Administration Manuals. WARNING IMPROPER GROUNDING HAZARD DRAFT COPY DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 High voltage is produced by commercial power access points and generator sets. Never attempt to connect to commercial power or start a generator set if it is not properly grounded. Failure to observe this warning can result in serious injury or death by electrocution. WARNING HIGH VOLTAGE HAZARD This equipment contains lethal voltages. Remove power from equipment before handling. Failure to observe this warning can result in serious injury or death. CAUTION CAUTION Antenna Radiation Emission As a precaution, maintain a minimum distance of 30 centimeters (12 inches) from the antenna array while in operation. CAUTION LITHIUM BATTERY Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions DRAFT COPY DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 2 NOMAD SYSTEM OVERVIEW 2.1 System Description Satellite (SV) On SIte Installation RJ11 NOMAD MXU Local PSTN Analog Phone Lines GATEWAY Remote Admin or Monitor PC NOMAD ISU RS232 Modem NOMAD ISU Gateway PSTN 110/230VAC 50/60 Hz. Local Admin or Monitor PC Trunkline Figure 2.1-1: NOMAD System NOMAD System The NOMAD System consists of the following major subassemblies: a. b. c. d. e. f. g. h. i. Local Public Telephone Switched Network (PSTN): NOMAD Multi-Channel Unit (NOMAD MXU): Optional Control PC: Allows monitoring of the NOMAD system if desired. Constellation of LEO Satellites: Gateway: Controls the Iridium network and the NOMAD System. NOMAD Control PC: Used by the Gateway to control the NOMAD MXU unit. Gateway PSTN: Public Switched telephone network attached to the Gateway Trunk Line: The communications path between the local PSTN and the Gateway PSTN. This path is used by the Gateway Control PC to initialize and control the NOMAD MXU. Iridium Subscriber Units (NOMAD ISU): Iridium portable handsets/telephones. The equipment supplied to the user’s site consists of the NOMAD MXU, antenna, mast, wiring and documentation as indicated by the rectangle in FIGURE 2.1-1. Once the NOMAD MXU is installed per the instructions in the Administrative and Installation Manuals, the NOMAD system will enable NOMAD ISU calls (from anywhere within a region defined by the Gateway) to be connected to the local PSTN. The NOMAD system will provide up to four channels of Iridium based global voice communication services from a NOMAD ISU to a local PSTN via the NOMAD MXU. The NOMAD MXU attaches to the local PSTN using four standard, two-wire, analog phone lines and appears as four additional telephones to the PSTN. The NOMAD MXU connects to the Iridium Constellation via four L-Band Transceivers (LBT) DRAFT COPY DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 located inside the NOMAD MXU. Phones attached to the local PSTN will be able to receive NOMAD ISU calls via the NOMAD MXU and IRIDIUM global system. A call placed from a NOMAD ISU to a person on the local PSTN will require the dual dialing procedure illustrated in the following steps: a. b. c. d. e. f. 2.2 2.2.1 The NOMAD ISU caller will dial the Iridium phone number of the NOMAD MXU’s channel one LBT. When answered by the NOMAD MXU, a tone will indicate to the NOMAD ISU user that he is required to enter his account number. The account number is then entered by the NOMAD ISU caller. The NOMAD MXU will check the account number to insure the caller is allowed on the NOMAD system. If the caller is a valid user, the NOMAD MXU will connect the caller to the local PSTN and the caller will hear a 2nd dial tone. The NOMAD ISU caller will then dial the PSTN destination number. The dialed number will be passed through the IRIDIUM constellation, NOPrograms Menu to select MCM_Admin.exe from within the installation directory or double-click on the Desktop Shortcut icon that is created by the installation. 4 INITIALIZATION and OPERATION 4.1 Creating a New NOMAD MXU Configuration This section covers the data and activities involved in setting up a new NOMAD MXU configuration. 4.1.1 Get Required Information The NOMAD MXU site or Nomad administration must be able to supply the following information for each NOMAD MXU site to be configured: • If pooled time groups are to be used, then the number (1-3) of groups must be known. The administrator uses the Configure Groups menu to create the groups and assign descriptive names to them. • The MSISDN (Iridium Phone Number) for each Iridium phone at the remote site must be known. If groups are configured then the group membership (group 1,2,3 or no group) for each phone must be supplied. This data is entered into the configuration by means of the Add NOMAD ISU menu, which allows the new MSISDN entry to be assigned to a group. • The phone number of the NOMAD MXU at the remote site must be known. This number is entered into the NOMAD MXU Connection Data Dial-up number box. It goes after any digits required for accessing an outside line or to get to Long Distance, etc. • The type of signaling used at the remote site, Pulse or Tone, must be known. This is set in the NOMAD MXU Location box, using the Phone Type at Location buttons. DRAFT COPY 27 DRAFT COPY NOMAD MXU Administration Manual • 3:33 PM 02/12/99 The amount of Nomad program airtime that will be allowed per month for each phone should be known. This information is entered into the Configuration for the NOMAD MXU, along with Gateway-supplied data, such as the desired security configuration. The MCM program creates a unique 7-digit ID code when each MSISDN is entered. This ID number will then be programmed into the Iridium Subscriber Unit (phone) SIM card, or given to the NOMAD MXU site to be used by the callers. The code identifies the Nomad time charging account when a call is made. 4.1.2 MCM New Configuration Screen When the NOMAD MXU Configuration Manager program icon is double clicked, it will present the following screen representing a blank configuration: Figure 4.1.2-1: New MCM Screen 4.1.3 • Enter Connection Data Type in the NOMAD MXU Location text description. This can be any text that the administrator chooses. DRAFT COPY 28 DRAFT COPY NOMAD MXU Administration Manual • • • 3:33 PM 02/12/99 Click on the Tone or Pulse button, depending on the type of phone system to which the NOMAD MXU will be connected. Type in the phone number for the NOMAD MXU. This field (at the top of the NOMAD MXU Connection Data section) must contain any digits required to get an outside line, long distance, any national code, area code and the local exchange number of the NOMAD MXU connection. This data is not required if the MCM PC will be directly connected to the NOMAD MXU via serial cable. Select the Modem button for a phone connection or the Cable button for a direct connection to the NOMAD MXU. If you have not already saved the configuration, you will be prompted to save it with a descriptive name at this time. 4.1.4 Enter Security Data If the Timeout Enabled box is checked, the NOMAD MXU will shut down automatically when not contacted by the MCM program (by doing a security poll, or configuration change, or diagnostic log retrieval, etc.). The number of days that the NOMAD MXU will continue to work without contact before shutting down is set in the Timeout field Uncheck the NOMAD MXU Enabled box if you want to be able to configure the NOMAD MXU but restrict it from answering calls from the Iridium phones until you enable it again. 4.1.5 Configure Pooled Time Groups Use the Define Groups button to bring down a dialog box, which will allow you to name and enable up to three groups whose MSISDN members will share airtime. 4.1.6 Enter MSISDNs Use the Add NOMAD ISU (Iridium Subscriber Unit) button to bring down a dialog box to enter the assigned MSISDN number and group (if any) for each Iridium phone at the NOMAD MXU site. As each phone number is entered, a new entry will appear in the main screen display, and the unique Charge ID for that phone will be allocated. If an MSISDN account is not a member of an airtime pooling group, leave the selection in the group selection box at NONE (see figure 8 ). 4.1.7 Set Nomad Airtime Recharge If this site is to receive Nomad program airtime at the start of each month, enter the number of minutes to be allocated for each phone and click on the Apply Recharge Minutes button. Phones that are members of a pooled airtime group will be shown with the available pooled time for the whole group in the Recharge column of the main display window. 4.1.8 Allocate Airtime If paid airtime or partial month Nomad airtime is to be assigned to any group, double click on any group member entry in the main display window. Add the airtime minutes into the edit field for the desired airtime category. Do the same for any non-group members that need to be changed. DRAFT COPY 29 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 4.1.9 Save the Configuration Document When the initial configuration document is first saved, the administrator must assign it a unique name. This name should be descriptive, because the file names will be displayed in the Windows Open Dialogue when the administrator wants to contact a particular NOMAD MXU. The document will be assigned the postfix ".NOMAD MXU". The file should be saved by use of the File…Save menu command whenever the configuration is changed. At certain critical times, the program will save the current configuration to disk with out the user’s request. If changes have not been saved when the file is closed, the user will be prompted to save the file before closing it. 4.1.10 First NOMAD MXU Communication (Initialization) The first time that an NOMAD MXU is configured it must be initialized. Before this can be done, the following conditions must be met: • • The NOMAD MXU at the remote site is installed and has passed the installation tests. The NOMAD MXU configuration has been created by the MCM program using the preceding steps. Click on the Connect menu and select Send Configuration to Unit. A message will appear to inform you that the NOMAD MXU must be initialized. Click on the OK button The MCM program connects to the NOMAD MXU and tells it to initialize. This is only done the first time that the NOMAD MXU is configured. You will receive a success/fail message after the initialization request is acknowledged by the NOMAD MXU. If it is a success, then please wait the requested amount of time while the NOMAD MXU finishes initialization. Then repeat the steps above to send the displayed configuration to the NOMAD MXU. This time, the configuration is accepted and the NOMAD MXU will begin to allow calls to be made (unless the configuration contains no current airtime or the security parameter NOMAD MXU Enabled is turned off). 4.1.11 Country Code Setting The NOMAD MXU is shipped to the installation site with its telephone interface pre-configured for the destination country. If the initialization is successful, the country code is correct and should never be changed by the remotely connected NOMAD MXU. To display the configured country code, use the Connect menu command Get Country Code from Unit after the initialization completes. If the unit does not initialize, it may be necessary to change the code on the NOMAD MXU by connecting a PC to the NOMAD MXU on site with a direct connect cable, and then using the Send Country Code to Unit command after selecting a different country from the drop down list in the Country Code display. This should be done only with advice from Nomad program support personnel. After the connection is working, the remote MCM PC can us the Get Country Code from Unit command to display the correct telephone configuration for the NOMAD MXU 4.2 Administration Issues DRAFT COPY 30 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 4.2.1 Operator Security Problem: it is desirable to have different Nomad administration operators control separate groups of NOMAD MXUs and it is required that each operator be restricted to just the assigned NOMAD MXUs. Solution: After the initial configuration (.NOMAD MXU) file has been saved and named, set the NT file permissions of the configuration (.NOMAD MXU) file and the subdirectory that has the same name as the configuration file. Set the permissions to allow read/write access to only the assigned operator/logon and the NT Administrator. Refer to the Files and Directories section for more information. Also check the NT help facility on the NT Start Menu for "files:permissions". 4.2.2 Air Time Recharge Control If the Auto Recharge On box is checked, the NOMAD MXU will automatically credit the amount of time displayed under the "Recharge" heading for the group or phone to the "Nomad Time" account at the start of each month. If the administrator removes the check from this box and sends the configuration, the recharge will still be applied for one more month. If the Auto Recharge is turned on again, monthly recharge will resume until the expiration of the Nomad program. 4.2.3 Maintaining Consistency with the NOMAD MXU It is important to realize that the local configuration file and the actual airtime values on the remote NOMAD MXU are only in agreement after the configuration has been read from the NOMAD MXU and saved to the file by using the Connect…Get Configuration from Unit and the File…Save menu commands. The correct procedure for changing the NOMAD MXU configuration is to first upload the current values from the NOMAD MXU, make the desired changes and then send the updated configuration to the NOMAD MXU. 4.2.4 Creating a Field Unit The .NOMAD MXU file must be present in order to communicate with a specific NOMAD MXU installation. If more than one PC must be able to communicate with an NOMAD MXU, use the following procedure AFTER initializing the NOMAD MXU by sending a first configuration: 1. 2. 3. 4. Install the MCM software on the second PC (either the ADMIN or MONITOR versions, depending on whether the second PC is allowed to change the configuration at the NOMAD MXU or only read it). Refer to the Copy the .NOMAD MXU file for the site to be administered from the original PC to the MCM directory on the second PC. Run the MCM program on the second PC and use the File..Open menu command to open the NOMAD MXU file, and then save it. This will create the directories associated with the configuration file. Make any connection changes that are required. For example, if the second PC is a laptop that will be directly connected to the NOMAD MXU, change the NOMAD MXU Connection Data selection from Modem to Cable. The PC is now ready to make connections to the NOMAD MXU. Repeat the above process for each NOMAD MXU that the new PC will need to administer. 4.3 Files and Directories DRAFT COPY 31 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 The InstallShield installation process will allow the user to select the top-level directory for the MCM. The following directory tree will then be created whenever a new configuration is saved/named for the first time. The tree is shown together with typical files that may be created. MCM\ MCM_Admin.exe mxumgr.pbk PhoenixAZ.mxu PhoenixAZ\ - Top directory created by Install - The MCM program - RAS phone book file - A saved Configuration file - Subdirectory for this NOMAD MXU configuration PhoenixAZ.txt - File created with the File…Create Text File menu Diagnostics\ - Subdirectory for diagnostics logs Diag1.txt - Uploaded diagnostic log. Errors\ SoftUpdate\ MXU\ LBT\ -Subdirectory for error logs Error1.txt -Uploaded error log -Will exist if an update is included in the MCM distribution -MXU Software -LBT Firmware 5 TROUBLE SHOOTING GUIDELINES 5.1 Troubleshooting VS. Security 5.2 How TO Retrieving NOMAD MXU Diagnostics Files 5.3 Initialization NOMAD MXU INITALIZATION PROBLEMS Problem(s) Possible Cause(s) Solution(s) DRAFT COPY 32 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 5.4 NOMAD MXU Operation Problems NOMAD MXU OPERATIONAL PROBLEMS Problem(s) Possible Cause(s) Solution(s) 5.5 Administrative Station Problems NOMAD MXU ADMINISTRATION STATION PROBLEMS Problem(s) Possible Cause(s) Solution(s) 5.6 Monitor Station Problems NOMAD MXU MONITOR STATION PROBLEMS Problem(s) Possible Cause(s) Solution(s) DRAFT COPY 33 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 5.7 NOMAD MXU System Problems Problem(s) The NOMAD User cannot make or receive any calls. Iridium NOMAD Service Equipment: Iridium Satellite Phone Possible Cause(s) Solution(s) The appropriate SIM (FDN) card may not be in the phone. Provide directions to the NOMAD User on how to put the appropriate SIM card in the phone. Refer to the equipment Instruction Manual. Iridium homed #8817: The NOMAD User may be trying to make a call while outside of his or her home country. Iridium homed #8817: The NOMAD User may be near a country border (within 10 km or 6 miles). The equipment may not be turned on. OR The battery may not be charged. Explain that the Iridium homed #8817 network may only be accessed when the NOMAD User is making calls from within his or her home country. Explain that the Iridium homed #8817 calls may not go through when the NOMAD User is within 10 km of a country border. Provide directions to the NOMAD User on how the phone operates or on how to change the battery. Refer to the equipment Instruction Manual. Check the Telephony Contract Window to verify the appropriate contract is activated. Verify the service package supports the desired use (e.g. service package does not restrict outbound or inbound calls). Instruct the NOMAD User on the dialing directions for a specific area. Refer to the equipment Instruction Manual. Check the Network Advisory system for any information in the Iridium Network. The appropriate provisioning contracts may not be activated. The NOMAD User may be misinformed about dialing directions. Potential network problem. Problem(s) The NOMAD User experiences difficulties during the call: • Transmission problems (crosstalk, echo, noise, static, distortion) • Dropped calls Iridium NOMAD Service Equipment: Iridium Satellite Phone Possible Cause(s) Solution(s) A structure or the environment (i.e. building, tunnel) may be blocking the line of sight between the NOMAD User’s phone and the satellite. The NOMAD User may be misinformed about the dialing directions. Advise the NOMAD User to move to a new location so a visible line of sight to the satellite can be established. Instruct the NOMAD User on the dialing directions for a specific area. Refer to the equipment Instruction Manual. DRAFT COPY 34 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Problem(s) Iridium NOMAD Service Equipment: Iridium Satellite Phone Possible Cause(s) Solution(s) Potential network problem. The NOMAD User receives an announcement when placing a call. The NOMAD User cannot use a feature associated with the Iridium service. The NOMAD User may not understand the content of the announcement. The NOMAD User may not understand the purpose of the announcement. The appropriate service package may not be activated through the contract. The NOMAD User may have activated or deactivated the service or feature through a NOMAD User Service Session. The NOMAD User experiences the following difficulty: • Equipment is lost, stolen, defective or damaged. Problem(s) NOMAD Mobile Access users unable to make calls on the PSTN The equipment has been misplaced, stolen, or broken. Check the Network Advisory system for any information in the Iridium Network. If the NOMAD User repeats the announcement to the Customer Service Representative (CSR), explain it to the NOMAD User. Explain why announcements are distributed. Access the Telephony Contract Window for the appropriate contract and verify the requested feature is available. Then verify the appropriate service package is selected. Verify the NOMAD User did not turn off the feature during a NOMAD User Service Session. Follow local policies and procedures for the handling of Lost, Stolen, Defective and Damaged equipment. Iridium NOMAD Service* Equipment: NOMAD MXU Possible Cause(s) Solution(s) Pin code problem or user education SIM Card problem End user problem NOMAD MXU not working PSTN problem Incorrect SIM cards installed in NOMAD MXU Sim card failure in NOMAD MXU Faulty Hardware in NOMAD MXU NOMAD ISU board in NOMAD MXU Dialogic board in NOMAD MXU PC hardware in NOMAD MXU Site Problem Interconnection issues DRAFT COPY 35 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Problem(s) Iridium NOMAD Service* Equipment: NOMAD MXU Possible Cause(s) Solution(s) Protocol incompatibilities Network failures DRAFT COPY 36 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 APPENDIX “A” - Null Modem Cable The diagram below shows the pin connections for a 9 pin direct connect cable used to connect a PC running the MCM program and an NOMAD MXU: TD (2) (2) TD RD (3) (3) RD RTS (7) (7) RTS CTS (8) (8) CTS DSR (6) (6) DSR Gnd (5) (5) Gnd DCD (1) (1) DCD DTR (4) (4) DTR Figure 1 Cable Pinout APPENDIX “B” - Example Create Text File The following is an example file produced with the Create Text File menu command. Iridium Nomad Configuration for: Printed at: 01/04/99 20:02:22 Phoenix, AZ Red Cross The Site is enabled. The Security Timeout is not enabled. The Site uses Tone Dial Method. The Site Dialup Number is: Automatic Recharge of Nomad Airtime is enabled. MSISDN 907 907 907 907 123 123 123 123 Status ID Number 04441 04442 04444 04446 Free Free Free Free 5381289 3303364 3833844 1092135 Pooled Time Group Nomad Emergency Medical Emergency Medical Disaster Relief NONE 0120+0000 0120+0000 0000+0030 0000+0045 Paid Recharge 0000+0000 0000+0000 0000+0000 0000+0000 0145+0060 0145+0060 0000+0030 0000+0000 Appendix “C” – Logs NOTICE: This file has been newly created. This means: (1) The MXU may be new. (2) Log files may have been cleared manually or by a Gateway command. DRAFT COPY 37 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 (3) Backup files may have just been created. (4) Both redundant files of this log may have been corrupted. In the last case, if this is an Error (Diagnostics) Log, all data is also in the Activity Log. If this is an Activity Log, data entries MAY HAVE BEEN LOST. Coordinated Universal Time is Thu Jan 28 13:23:22 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 13:28:15 1999 Gateway connected via RS232 port. Coordinated Universal Time is Thu Jan 28 13:28:19 1999 Remote Connection established. Computer:PC-EPB94 User: factory Coordinated Universal Time is Thu Jan 28 15:03:56 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 15:10:37 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 15:18:02 1999 Gateway connected via RS232 port. Coordinated Universal Time is Thu Jan 28 15:18:20 1999 Remote Connection established. Computer:PC-EPB94 User: factory Coordinated Universal Time is Thu Jan 28 15:22:03 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 15:27:29 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 15:33:11 1999 LBT 2 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 15:33:11 1999 LBT 1 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 15:33:11 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 15:33:12 1999 LBT 3 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 15:58:25 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Thu Jan 28 15:58:40 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. DRAFT COPY 38 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 15:58:52 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Thu Jan 28 15:59:46 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 15:59:48 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:00:01 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 16:00:01 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Thu Jan 28 16:00:01 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Thu Jan 28 16:00:01 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Thu Jan 28 16:00:01 1999 LBT:1 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:00:13 1999 LBT 2 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:00:18 1999 LBT:2 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:00:37 1999 LBT 3 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:00:44 1999 LBT:3 is now ready for calls. DRAFT COPY 39 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Thu Jan 28 16:01:02 1999 LBT 4 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:01:09 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:01:24 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:04:01 1999 PBX:4 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:04:07 1999 LBT 3 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:04:08 1999 LBT 2 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:04:08 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:04:10 1999 LBT 1 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:09:18 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Thu Jan 28 16:09:47 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 16:10:01 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 16:10:02 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Thu Jan 28 16:11:25 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Thu Jan 28 16:11:54 1999 The MXU has been powered up. DRAFT COPY 40 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 16:12:09 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 16:12:09 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Thu Jan 28 16:12:17 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:12:22 1999 LBT:1 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:12:42 1999 LBT 2 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:12:47 1999 LBT:2 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:13:06 1999 LBT 3 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:13:13 1999 LBT:3 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:13:31 1999 LBT 4 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:13:38 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:14:05 1999 LBT 2 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:14:05 1999 LBT 3 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:14:06 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:14:06 1999 LBT 1 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:15:42 1999 DRAFT COPY 41 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:16:34 1999 PBX:4 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:18:01 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Thu Jan 28 16:18:30 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 16:18:45 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 16:18:45 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Thu Jan 28 16:18:53 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:18:58 1999 LBT:1 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:19:18 1999 LBT 2 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:19:23 1999 LBT:2 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:19:42 1999 LBT 3 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:19:49 1999 LBT:3 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:20:07 1999 LBT 4 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 16:20:14 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Thu Jan 28 16:20:49 1999 LBT 4 signal level for successful call: 5 DRAFT COPY 42 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Thu Jan 28 16:20:57 1999 Connected channel LBT:4 to PBX:1 Coordinated Universal Time is Thu Jan 28 16:21:06 1999 LBT 3 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:21:13 1999 Connected channel LBT:3 to PBX:3 Coordinated Universal Time is Thu Jan 28 16:21:22 1999 LBT 2 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 16:21:29 1999 Connected channel LBT:2 to PBX:2 Coordinated Universal Time is Thu Jan 28 16:21:38 1999 LBT 1 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:32:06 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Thu Jan 28 23:33:06 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 23:33:18 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Thu Jan 28 23:33:18 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Thu Jan 28 23:33:18 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 23:33:19 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Thu Jan 28 23:33:28 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 23:33:33 1999 LBT:1 is now ready for calls. DRAFT COPY 43 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Thu Jan 28 23:33:53 1999 LBT 2 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 23:33:59 1999 LBT:2 is now ready for calls. Coordinated Universal Time is Thu Jan 28 23:34:17 1999 LBT 3 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 23:34:24 1999 LBT:3 is now ready for calls. Coordinated Universal Time is Thu Jan 28 23:34:42 1999 LBT 4 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Thu Jan 28 23:34:50 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Thu Jan 28 23:34:56 1999 LBT 2 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:35:06 1999 Connected channel LBT:2 to PBX:2 Coordinated Universal Time is Thu Jan 28 23:35:22 1999 LBT 1 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:35:35 1999 Connected channel LBT:1 to PBX:1 Coordinated Universal Time is Thu Jan 28 23:35:50 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:36:01 1999 Connected channel LBT:4 to PBX:3 Coordinated Universal Time is Thu Jan 28 23:36:16 1999 LBT 3 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:36:59 1999 PBX:4 is now ready for calls. Coordinated Universal Time is Thu Jan 28 23:37:23 1999 LBT 2 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:37:34 1999 Connected channel LBT:2 to PBX:2 Coordinated Universal Time is Thu Jan 28 23:37:49 1999 LBT 1 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:38:02 1999 Connected channel LBT:1 to PBX:1 Coordinated Universal Time is Thu Jan 28 23:38:17 1999 DRAFT COPY 44 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:38:28 1999 Connected channel LBT:4 to PBX:4 Coordinated Universal Time is Thu Jan 28 23:38:44 1999 LBT 3 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:38:54 1999 Connected channel LBT:3 to PBX:3 Coordinated Universal Time is Thu Jan 28 23:42:26 1999 LBT 2 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:42:36 1999 Connected channel LBT:2 to PBX:2 Coordinated Universal Time is Thu Jan 28 23:42:52 1999 LBT 1 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:43:04 1999 Connected channel LBT:1 to PBX:1 Coordinated Universal Time is Thu Jan 28 23:43:21 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:43:31 1999 Connected channel LBT:4 to PBX:4 Coordinated Universal Time is Thu Jan 28 23:43:46 1999 LBT 3 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:43:57 1999 Connected channel LBT:3 to PBX:3 Coordinated Universal Time is Thu Jan 28 23:48:19 1999 LBT 2 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:48:29 1999 Connected channel LBT:2 to PBX:2 Coordinated Universal Time is Thu Jan 28 23:48:45 1999 LBT 1 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:48:57 1999 Connected channel LBT:1 to PBX:1 Coordinated Universal Time is Thu Jan 28 23:49:14 1999 LBT 4 signal level for successful call: 5 Coordinated Universal Time is Thu Jan 28 23:49:24 1999 Connected channel LBT:4 to PBX:4 Coordinated Universal Time is Thu Jan 28 23:49:39 1999 LBT 3 signal level for successful call: 5 DRAFT COPY 45 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Thu Jan 28 23:49:49 1999 Connected channel LBT:3 to PBX:3 Coordinated Universal Time is Fri Jan 29 00:17:32 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 00:17:32 1999 Power Switched Off Coordinated Universal Time is Fri Jan 29 14:37:21 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 14:38:12 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 14:38:24 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 14:38:25 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 14:38:25 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 14:38:25 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 14:40:12 1999 LBT 1 is not operational Coordinated Universal Time is Fri Jan 29 14:40:12 1999 LBT 2 is not operational Coordinated Universal Time is Fri Jan 29 14:40:12 1999 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 14:40:13 1999 LBT 4 is not operational Coordinated Universal Time is Fri Jan 29 14:42:04 1999 Power Interrupt Values: 31 DRAFT COPY 46 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Fri Jan 29 14:42:04 1999 Power Switched Off Coordinated Universal Time is Fri Jan 29 14:44:10 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 14:44:59 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 14:45:11 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 14:45:11 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 14:45:12 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 14:45:12 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 14:46:59 1999 LBT 1 is not operational Coordinated Universal Time is Fri Jan 29 14:46:59 1999 LBT 2 is not operational Coordinated Universal Time is Fri Jan 29 14:46:59 1999 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 14:46:59 1999 LBT 4 is not operational Coordinated Universal Time is Fri Jan 29 14:47:24 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 14:47:24 1999 Power Switched Off Coordinated Universal Time is Fri Jan 29 14:50:35 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 14:51:29 1999 DRAFT COPY 47 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 14:51:41 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 14:51:41 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 14:51:42 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 14:51:42 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 14:53:29 1999 LBT 1 is not operational Coordinated Universal Time is Fri Jan 29 14:53:29 1999 LBT 2 is not operational Coordinated Universal Time is Fri Jan 29 14:53:29 1999 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 14:53:30 1999 LBT 4 is not operational Coordinated Universal Time is Fri Jan 29 14:53:50 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 14:53:50 1999 Power Switched Off Coordinated Universal Time is Fri Jan 29 14:56:18 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 14:57:07 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. DRAFT COPY 48 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 14:57:19 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 14:57:20 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 14:57:20 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 14:57:21 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 14:58:39 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 14:58:39 1999 Power Switched Off Coordinated Universal Time is Fri Jan 29 15:00:47 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 15:01:36 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 15:01:48 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 15:01:49 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 15:01:49 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 15:01:50 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! DRAFT COPY 49 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Fri Jan 29 15:03:36 1999 LBT 1 is not operational Coordinated Universal Time is Fri Jan 29 15:03:36 1999 LBT 2 is not operational Coordinated Universal Time is Fri Jan 29 15:03:36 1999 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 15:03:37 1999 LBT 4 is not operational Coordinated Universal Time is Fri Jan 29 15:04:10 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 15:04:10 1999 Power Switched Off Coordinated Universal Time is Fri Jan 29 15:10:15 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 15:11:04 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 15:11:18 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 15:11:18 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 15:11:19 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 15:11:19 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 15:11:54 1999 Gateway connected via RS232 port. Coordinated Universal Time is Fri Jan 29 15:13:04 1999 LBT 1 is not operational Coordinated Universal Time is Fri Jan 29 15:13:06 1999 DRAFT COPY 50 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT 2 is not operational Coordinated Universal Time is Fri Jan 29 15:13:06 1999 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 15:13:06 1999 LBT 4 is not operational Coordinated Universal Time is Fri Jan 29 15:13:07 1999 Remote Access failed to log on. Coordinated Universal Time is Fri Jan 29 15:13:31 1999 Gateway connected via RS232 port. Coordinated Universal Time is Fri Jan 29 15:17:53 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 15:17:53 1999 Power Switched Off Coordinated Universal Time is Fri Jan 29 15:20:25 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 15:21:16 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 15:21:28 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 15:21:29 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 15:21:29 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 15:21:29 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 15:23:16 1999 LBT 1 is not operational Coordinated Universal Time is Fri Jan 29 15:23:16 1999 LBT 2 is not operational DRAFT COPY 51 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Fri Jan 29 15:23:16 1999 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 15:23:17 1999 LBT 4 is not operational Coordinated Universal Time is Fri Jan 29 15:26:46 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 15:26:46 1999 Power Switched Off Coordinated Universal Time is Fri Jan 29 15:28:51 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 15:29:43 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 15:29:55 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 15:29:56 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 15:29:56 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 15:29:56 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 15:31:43 1999 LBT 1 is not operational Coordinated Universal Time is Fri Jan 29 15:31:43 1999 LBT 2 is not operational Coordinated Universal Time is Fri Jan 29 15:31:43 1999 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 15:31:43 1999 LBT 4 is not operational DRAFT COPY 52 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Fri Jan 29 16:04:51 1999 Gateway connected via RS232 port. Coordinated Universal Time is Fri Jan 29 16:05:00 1999 Remote Connection established. Computer:MXUSITE1 User: Administrator Coordinated Universal Time is Fri Jan 29 16:09:22 1999 Gateway connected via RS232 port. Coordinated Universal Time is Fri Jan 29 16:09:43 1999 Remote Connection established. Computer:MXUSITE1 User: Administrator Coordinated Universal Time is Fri Jan 29 16:14:15 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 16:14:15 1999 Power Switched Off Coordinated Universal Time is Fri Jan 29 23:25:50 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 23:26:39 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 23:26:54 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 23:26:54 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 23:26:54 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 23:26:54 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 23:27:01 1999 LBT 1 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Fri Jan 29 23:28:39 1999 LBT 2 is not operational Coordinated Universal Time is Fri Jan 29 23:28:39 1999 DRAFT COPY 53 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 23:28:39 1999 LBT 4 is not operational Coordinated Universal Time is Fri Jan 29 23:31:38 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 23:32:02 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 23:32:16 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 23:32:16 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 23:32:24 1999 LBT 1 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Fri Jan 29 23:34:02 1999 LBT 2 is not operational Coordinated Universal Time is Fri Jan 29 23:34:02 1999 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 23:34:02 1999 LBT 4 is not operational Coordinated Universal Time is Fri Jan 29 23:34:32 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 23:34:42 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 23:34:51 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 23:35:01 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 23:37:02 1999 LBT 1 SW Version = 0x00 0x00 0x00 DRAFT COPY 54 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Fri Jan 29 23:37:10 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 23:41:40 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Fri Jan 29 23:42:31 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 23:42:43 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Fri Jan 29 23:42:43 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Fri Jan 29 23:42:44 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 23:42:44 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 23:42:53 1999 LBT 1 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Fri Jan 29 23:44:31 1999 LBT 2 is not operational Coordinated Universal Time is Fri Jan 29 23:44:31 1999 LBT 3 is not operational Coordinated Universal Time is Fri Jan 29 23:44:31 1999 LBT 4 is not operational Coordinated Universal Time is Fri Jan 29 23:45:15 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 23:45:23 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 23:45:30 1999 Power Interrupt Values: 31 DRAFT COPY 55 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Fri Jan 29 23:45:35 1999 Power Interrupt Values: 31 Coordinated Universal Time is Fri Jan 29 23:46:47 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Fri Jan 29 23:51:47 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Fri Jan 29 23:56:48 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Sat Jan 30 00:01:48 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Sat Jan 30 00:06:48 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Sat Jan 30 00:11:48 1999 LBT 1 SW Version = 0x00 0x00 0x00 Coordinated Universal Time is Sat Jan 30 00:11:50 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:30:03 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Sat Jan 30 00:30:52 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Sat Jan 30 00:31:06 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Sat Jan 30 00:31:06 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Sat Jan 30 00:31:07 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Sat Jan 30 00:31:07 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Sat Jan 30 00:31:14 1999 DRAFT COPY 56 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT 1 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Sat Jan 30 00:31:47 1999 LBT:1 is now ready for calls. Coordinated Universal Time is Sat Jan 30 00:32:52 1999 LBT 2 is not operational Coordinated Universal Time is Sat Jan 30 00:32:52 1999 LBT 3 is not operational Coordinated Universal Time is Sat Jan 30 00:32:52 1999 LBT 4 is not operational Coordinated Universal Time is Sat Jan 30 00:33:20 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:33:24 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:33:28 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:35:42 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:35:46 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:35:50 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:36:42 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:39:22 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:42:56 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Sat Jan 30 00:46:21 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Sat Jan 30 00:47:13 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. DRAFT COPY 57 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Sat Jan 30 00:47:25 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Sat Jan 30 00:47:25 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Sat Jan 30 00:47:26 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Sat Jan 30 00:47:26 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Sat Jan 30 00:49:13 1999 LBT 1 is not operational Coordinated Universal Time is Sat Jan 30 00:49:13 1999 LBT 2 is not operational Coordinated Universal Time is Sat Jan 30 00:49:13 1999 LBT 3 is not operational Coordinated Universal Time is Sat Jan 30 00:49:14 1999 LBT 4 is not operational Coordinated Universal Time is Sat Jan 30 00:49:41 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:50:50 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:50:55 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:50:59 1999 Power Interrupt Values: 31 Coordinated Universal Time is Sat Jan 30 00:51:07 1999 LBT 1 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Sat Jan 30 00:51:14 1999 LBT:1 is now ready for calls. Coordinated Universal Time is Sat Jan 30 00:55:23 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Sat Jan 30 00:56:12 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. DRAFT COPY 58 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Sat Jan 30 00:56:24 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Sat Jan 30 00:56:25 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Sat Jan 30 00:56:25 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Sat Jan 30 00:56:26 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Sat Jan 30 00:56:34 1999 LBT 1 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Sat Jan 30 00:56:41 1999 LBT:1 is now ready for calls. Coordinated Universal Time is Sat Jan 30 00:58:12 1999 LBT 2 is not operational Coordinated Universal Time is Sat Jan 30 00:58:12 1999 LBT 3 is not operational Coordinated Universal Time is Sat Jan 30 00:58:12 1999 LBT 4 is not operational Coordinated Universal Time is Sat Jan 30 00:59:51 1999 Power Interrupt Values: 31 Coordinated Universal Time is Mon Feb 01 16:16:14 1999 Power Interrupt Values: 31 Coordinated Universal Time is Mon Feb 01 16:16:19 1999 Power Interrupt Values: 31 Coordinated Universal Time is Tue Feb 02 18:56:01 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Tue Feb 02 18:56:50 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. DRAFT COPY 59 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Tue Feb 02 18:57:05 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Tue Feb 02 18:57:05 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Tue Feb 02 18:57:05 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Tue Feb 02 18:57:05 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Tue Feb 02 18:58:44 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Tue Feb 02 18:58:50 1999 LBT 1 is not operational Coordinated Universal Time is Tue Feb 02 18:58:50 1999 LBT 2 is not operational Coordinated Universal Time is Tue Feb 02 18:58:50 1999 LBT 3 is not operational Coordinated Universal Time is Tue Feb 02 18:58:53 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Tue Feb 02 19:15:03 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Tue Feb 02 19:15:27 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Tue Feb 02 19:15:41 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! DRAFT COPY 60 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Tue Feb 02 19:15:41 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Tue Feb 02 19:17:21 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Tue Feb 02 19:17:27 1999 LBT 1 is not operational Coordinated Universal Time is Tue Feb 02 19:17:27 1999 LBT 2 is not operational Coordinated Universal Time is Tue Feb 02 19:17:27 1999 LBT 3 is not operational Coordinated Universal Time is Tue Feb 02 19:17:30 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Tue Feb 02 19:18:09 1999 Power Interrupt Values: 31 Coordinated Universal Time is Tue Feb 02 19:19:26 1999 Power Interrupt Values: 31 Coordinated Universal Time is Tue Feb 02 19:19:48 1999 Power Interrupt Values: 31 Coordinated Universal Time is Tue Feb 02 19:21:04 1999 Power Interrupt Values: 31 Coordinated Universal Time is Tue Feb 02 19:22:21 1999 Power Interrupt Values: 31 Coordinated Universal Time is Tue Feb 02 20:05:57 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Tue Feb 02 20:06:20 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Tue Feb 02 20:06:35 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! DRAFT COPY 61 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Tue Feb 02 20:06:35 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Tue Feb 02 20:08:15 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Tue Feb 02 20:08:20 1999 LBT 1 is not operational Coordinated Universal Time is Tue Feb 02 20:08:20 1999 LBT 2 is not operational Coordinated Universal Time is Tue Feb 02 20:08:20 1999 LBT 3 is not operational Coordinated Universal Time is Tue Feb 02 20:08:24 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Tue Feb 02 22:12:07 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Tue Feb 02 22:12:31 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Tue Feb 02 22:12:45 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Tue Feb 02 22:12:46 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Tue Feb 02 22:14:25 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Tue Feb 02 22:14:31 1999 LBT 1 is not operational Coordinated Universal Time is Tue Feb 02 22:14:31 1999 LBT 2 is not operational Coordinated Universal Time is Tue Feb 02 22:14:31 1999 LBT 3 is not operational Coordinated Universal Time is Tue Feb 02 22:14:34 1999 DRAFT COPY 62 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT:4 is now ready for calls. Coordinated Universal Time is Wed Feb 03 16:57:00 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 16:57:24 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 16:57:38 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 16:57:38 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 16:58:19 1999 Gateway connected via RS232 port. Coordinated Universal Time is Wed Feb 03 16:59:18 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Wed Feb 03 16:59:28 1999 LBT 1 is not operational Coordinated Universal Time is Wed Feb 03 16:59:28 1999 LBT 2 is not operational Coordinated Universal Time is Wed Feb 03 16:59:33 1999 LBT 3 is not operational Coordinated Universal Time is Wed Feb 03 16:59:50 1999 Remote Access failed to log on. Coordinated Universal Time is Wed Feb 03 17:00:08 1999 Gateway connected via RS232 port. Coordinated Universal Time is Wed Feb 03 17:00:14 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Wed Feb 03 17:00:23 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:01:41 1999 SC2000 version register value: 0x00 DRAFT COPY 63 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Wed Feb 03 17:01:44 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:02:14 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 17:02:38 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:02:52 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:02:53 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 17:03:12 1999 Gateway connected via RS232 port. Coordinated Universal Time is Wed Feb 03 17:06:48 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 17:07:40 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. DRAFT COPY 64 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:07:55 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:07:55 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 17:07:55 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Wed Feb 03 17:07:55 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Wed Feb 03 17:08:30 1999 Gateway connected via RS232 port. Coordinated Universal Time is Wed Feb 03 17:09:34 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Wed Feb 03 17:09:40 1999 LBT 1 is not operational Coordinated Universal Time is Wed Feb 03 17:09:44 1999 LBT 2 is not operational Coordinated Universal Time is Wed Feb 03 17:09:44 1999 LBT 3 is not operational Coordinated Universal Time is Wed Feb 03 17:09:44 1999 LBT 4 is not operational Coordinated Universal Time is Wed Feb 03 17:10:06 1999 Remote Access failed to log on. Coordinated Universal Time is Wed Feb 03 17:10:24 1999 Gateway connected via RS232 port. Coordinated Universal Time is Wed Feb 03 17:10:33 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Wed Feb 03 17:10:49 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:11:02 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:11:14 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:11:25 1999 DRAFT COPY 65 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:11:50 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:11:55 1999 Remote Access failed to log on. Coordinated Universal Time is Wed Feb 03 17:12:16 1999 Gateway connected via RS232 port. Coordinated Universal Time is Wed Feb 03 17:13:39 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 17:13:43 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:14:19 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 17:14:43 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:14:57 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:14:57 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 17:16:37 1999 LBT 4 SW Version = 0xB6 0x01 0x03 DRAFT COPY 66 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Wed Feb 03 17:16:43 1999 LBT 1 is not operational Coordinated Universal Time is Wed Feb 03 17:16:43 1999 LBT 2 is not operational Coordinated Universal Time is Wed Feb 03 17:16:43 1999 LBT 3 is not operational Coordinated Universal Time is Wed Feb 03 17:16:46 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Wed Feb 03 17:44:06 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 17:49:34 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 17:50:23 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:50:35 1999 MODEM Successfully programmed. MODEM Identifier :V2.096-K56_2M_DLP_CSMT Coordinated Universal Time is Wed Feb 03 17:50:35 1999 MODEM Data Pump Identifier :RC56DPF L8565A Rev 47.22/47.22 Coordinated Universal Time is Wed Feb 03 17:50:36 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:50:36 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 17:52:17 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Wed Feb 03 17:52:23 1999 LBT 1 is not operational Coordinated Universal Time is Wed Feb 03 17:52:23 1999 LBT 2 is not operational DRAFT COPY 67 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Wed Feb 03 17:52:23 1999 LBT 3 is not operational Coordinated Universal Time is Wed Feb 03 17:52:26 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Wed Feb 03 17:52:55 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:53:06 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:54:04 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:55:26 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:56:00 1999 Power Interrupt Values: 31 Coordinated Universal Time is Wed Feb 03 17:58:53 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 17:59:16 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:59:31 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:59:31 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 18:01:11 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Wed Feb 03 18:01:16 1999 LBT 1 is not operational Coordinated Universal Time is Wed Feb 03 18:01:16 1999 LBT 2 is not operational Coordinated Universal Time is Wed Feb 03 18:01:17 1999 DRAFT COPY 68 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT 3 is not operational Coordinated Universal Time is Wed Feb 03 18:01:19 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Wed Feb 03 22:07:30 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 22:08:21 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 22:10:51 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 22:11:15 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 22:11:29 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 22:11:30 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 22:13:09 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Wed Feb 03 22:13:15 1999 LBT 1 is not operational Coordinated Universal Time is Wed Feb 03 22:13:15 1999 LBT 2 is not operational DRAFT COPY 69 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Wed Feb 03 22:13:15 1999 LBT 3 is not operational Coordinated Universal Time is Wed Feb 03 22:13:18 1999 LBT:4 is now ready for calls. Coordinated Universal Time is Wed Feb 03 22:22:19 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 22:23:39 1999 SC2000 version register value: 0x00 Coordinated Universal Time is Wed Feb 03 22:24:02 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 22:24:17 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 22:24:17 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 22:25:57 1999 LBT 4 SW Version = 0xB6 0x01 0x03 Coordinated Universal Time is Wed Feb 03 22:26:02 1999 LBT 1 is not operational Coordinated Universal Time is Wed Feb 03 22:26:02 1999 LBT 2 is not operational Coordinated Universal Time is Wed Feb 03 22:26:02 1999 LBT 3 is not operational Coordinated Universal Time is Wed Feb 03 22:26:06 1999 LBT:4 is now ready for calls. NOTICE: This file has been newly created. This means: (1) The MXU may be new. (2) Log files may have been cleared manually or by a Gateway command. DRAFT COPY 70 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 (3) Backup files may have just been created. (4) Both redundant files of this log may have been corrupted. In the last case, if this is an Error (Diagnostics) Log, all data is also in the Activity Log. If this is an Activity Log, data entries MAY HAVE BEEN LOST. Coordinated Universal Time is Thu Jan 28 15:58:40 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 15:59:46 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 16:00:01 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 16:00:01 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Thu Jan 28 16:09:47 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** DRAFT COPY 71 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Thu Jan 28 16:10:01 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 16:10:02 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Thu Jan 28 16:11:54 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 16:12:08 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 16:12:09 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Thu Jan 28 16:18:30 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 16:18:45 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 16:18:45 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Thu Jan 28 23:33:05 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. DRAFT COPY 72 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 is available. Dialogic Channel 2 is available. Dialogic Channel 3 is available. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Thu Jan 28 23:33:18 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Thu Jan 28 23:33:19 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 14:38:12 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 14:38:25 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 14:38:25 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 14:44:59 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 14:45:11 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! DRAFT COPY 73 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Fri Jan 29 14:45:12 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 14:51:29 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 14:51:42 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 14:51:42 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 14:57:07 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 14:57:20 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 14:57:20 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 15:01:36 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. DRAFT COPY 74 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 15:01:49 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 15:01:49 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 15:11:04 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 15:11:18 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 15:11:18 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 15:21:16 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 15:21:29 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 15:21:29 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 15:29:43 1999 The MXU has been powered up. DRAFT COPY 75 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 15:29:56 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 15:29:56 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 23:26:39 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 23:26:53 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 23:26:54 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 23:32:02 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** DRAFT COPY 76 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Fri Jan 29 23:32:16 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 23:32:16 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Fri Jan 29 23:42:31 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Fri Jan 29 23:42:43 1999 D:\mxusrc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Fri Jan 29 23:42:44 1999 D:\mxusrc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Sat Jan 30 00:30:52 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Sat Jan 30 00:31:06 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Sat Jan 30 00:31:07 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Sat Jan 30 00:47:13 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. DRAFT COPY 77 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Sat Jan 30 00:47:26 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Sat Jan 30 00:47:26 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Sat Jan 30 00:56:12 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Sat Jan 30 00:56:25 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Sat Jan 30 00:56:25 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Tue Feb 02 18:56:50 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Tue Feb 02 18:57:05 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Tue Feb 02 18:57:05 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! DRAFT COPY 78 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Tue Feb 02 19:15:27 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Tue Feb 02 19:15:41 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Tue Feb 02 19:15:41 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Tue Feb 02 20:06:20 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Tue Feb 02 20:06:34 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Tue Feb 02 20:06:35 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Tue Feb 02 22:12:31 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. DRAFT COPY 79 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 ******************** Coordinated Universal Time is Tue Feb 02 22:12:45 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Tue Feb 02 22:12:45 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 16:57:24 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 16:57:38 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 16:57:38 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 17:01:44 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:02:38 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. DRAFT COPY 80 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:02:52 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:02:52 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 17:07:40 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:07:54 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:07:55 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 17:13:43 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:14:43 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. DRAFT COPY 81 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:14:57 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:14:57 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 17:50:23 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:50:35 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:50:36 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 17:59:16 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 17:59:31 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 17:59:31 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! DRAFT COPY 82 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 Coordinated Universal Time is Wed Feb 03 22:08:21 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 22:11:15 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 22:11:29 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 22:11:30 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! Coordinated Universal Time is Wed Feb 03 22:24:02 1999 The MXU has been powered up. Results of Initialization: LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. LBT Interface startup complete. Waiting for LBT Response. Dialogic Channel 1 did not detect dial tone. Dialogic Channel 2 did not detect dial tone. Dialogic Channel 3 did not detect dial tone. Dialogic Channel 4 did not detect dial tone. ******************** Coordinated Universal Time is Wed Feb 03 22:24:17 1999 D:\mxu_fcc\db\Logwrite.cpp: Opening AT from Master! Coordinated Universal Time is Wed Feb 03 22:24:17 1999 DRAFT COPY 83 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 D:\mxu_fcc\db\Logwrite.cpp: Opening SC from Master! APPENDIX “C” – Specifications Dimensions 19.0”W X 16.0” L X 5.25”H Weight less than 20 lbs. Operating Temperature +15oC to +35oC Storage Temperature -20oC to +60oC Humidity 80% RH at 40oC Service Life 5 years Power 110/230 VAC, 50/60 Hertz Interface to PBX/PSTN Four analog phone lines MXU shall emulate the following phone types: (UK), BAPT 223 ZV5 (Germany), B 11-23A (France), FCC Part 68 (USA), TS-002 (Australia), JATE (Japan) Operating (transmit and receive) 1616 - 1625.5 MHz OSC Stability +/- 1.5 ppm Duplexing Method Time Division Duplex Multiplexing Method TDMA/FDMA Link Margin (w/exterior Antenna) 12.5 dB average Sensitivity -117.9 dBm (Measured at the RF Connector) TX Spurs General -71 dBc(Measured at the RF Connector) TX Spurs GNSS 1559-1605 MHz -91dBc (Measured at the RF Connector) TX Noise GNSS 1559-1605 MHz -81dBc (Measured at the RF Connector) Distance between Antennas 3 feet Min DRAFT COPY 84 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 DRAFT COPY 85 DRAFT COPY NOMAD MXU Administration Manual 3:33 PM 02/12/99 APPENDIX “D” - Warranty DRAFT COPY 86
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 1999:02:12 15:43:05 Producer : Acrobat Distiller 3.01 for Windows Creator : Windows NT 4.0 Title : Microsoft Word - MXUEXH7A.doc Modify Date : 1999:02:12 15:47:48 Page Count : 87EXIF Metadata provided by EXIF.tools