Genex Telecom MT800 VHF FM Transceiver User Manual program eng

Download:
Mirror Download [FCC.gov]
Document ID	359234
Application ID	72YvvGs4ffBrRtFjTgGMQg==
Document Description	Preliminary Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.97kB (199573 bits)
Date Submitted	2003-09-23 00:00:00
Date Available	2003-09-23 00:00:00
Creation Date	2003-09-16 02:23:35
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-09-23 10:06:49
Document Title	Microsoft Word - program-eng.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	C0CCC0CFC7A5

MT-800 PC PROGRAMMER USER’S GUIDE
The main function and frequency of MT-800 is supposed to work for PC
PROGRAMMER.
The usage of this program is SOFTWARE INSTALLATION of WINDOWS OS to
WINDOWS 98(FIRST, SECOND EDITION), WINDOW SERIES, AND WINDOWS XP for
PERSONAL COMPUTER only.
1. INSIDE OF MT-800 PC PROGRAMMER KIT
PROGRAMMING KIT contains following.
1) PROGRAM CD
THE SOFRWARE VERSION SHOWS UP IN THE HELP INFO.
2)MT-800 PROGRAMMING LEAD
2. HARDWARE INSTALLATION
Connect MT-800 programming lead to personal computer com1 or com 2 and
connect the other side to mic connector for finishing hardware
installation.
3. SOFTWARE INSTALLATION
There’s a CD include in the programming kit and inside of CD,
there’s program called MT-800.EXE FILE, click that file, then it
appears to be like below, and that would be end of the software
installation.
※Importance of PC PROGRAM
1) Before start PC PROGRAM, make sure
follow steps below.
1-1) for write
MONITOR BUTTON + POWER ON
for read or write program, to
WRITE → DISPLAY AT THE LCD
MODE BUTTON
WRITE NOW → DISPLAY AT THE LCD
1-2) for read
MONITOR BUTTON + POWER ON
CHANNEL UP OR DOWN BUTTON
READ → DISPLAY AT THE LCD
MODE BUTTON
READ NOW → DISPLAY AT THE LCD
4. Model selection
If install MJT-800.EXE file in the computer, it appears model selection
block window and will blank, but right now the program is set for only
MT-800, so no need to select the extra and get to programming right away.
5. Setting up for system option
1) com port set up
This is for hardware setting of port set up only.
to port 4.
There are port 1
1) PROGRAM READ AND WRITE
Read the data from set or write the one.
2) SCAN OPTION SET UP
3-1) SCAN SPEED : 50 ~ 500msec range. Primary stage is 50msec.
3-2) ATTACK TIME : 0 ~ 4 sec range. Primary stage is 0sec.
3-3) RESUME TIME : 1 ~ 10 sec range. Primary stage is 4sec.
3-4) HOME CHANNEL : 1 ~ 32CHANNEL range.
Primary stage is 1 CHANNEL.
3) DISPLAY SET UP
Can be select set display. CHANNEL, NAME AND FREQUENCY are
possible.
4) MODE OPTION
You can change and select what you want.
5) SCAN MODE
You can change and select what you want.
7) T-O-T SETUP
You can change and select what you want. If you need.
Primary stage is DISABLE.
ENABLE : 10 ~ 990sec range, STEP is 10 sec.
PENALTY ENABLE : 1 ~ 60sec range, STEP is 1 sec.
6. Setting up for Tool OPTION
1) NEW CREATE : Can be change the original setting or you can make a
your own setting.
2) OPEN FILE : Can be see the old data or can find you one.
3) SAVE : Save the new Data
4)
5)
6)
7)
UP LOAD :Up load the new data from PC to Set
DOWN LOAD : Down load from the set.
PRINT : Can be print.
EXIT : Use this for quit from PROGRAM.
7. Setting up for Frequency
1) You can input the frequency form 148MHz to 174MHz every 5KHz –
6.25KHz STEP.
2) NAME section has originally set up CH, every CHANNEL can be
input the own name that is possible 8 number or alphabet.
3) TONE OPTION is composed of NO TONE, CTCSS, DCS, IDCS, CTCSS 49
TONE CODE ( STANDARD CTCSS 38 , NON STANDARD CTCSS 11 ),
DCS/IDCS 83 NORMAL CODE AND 83 INVERT CODE.
4) If you want to input the TONE, you have to accept and then you
can go to next step.
NOTICE
There are no user-serviceable points inside this transceiver. All service
jobs must be referred to your Authorization Service Center or Network
Administrator
Safety/ Warning Information
WARNING – DO NOT operate the MT-800 radio when someone
(bystanders) outside the vehicle are within following range.
Safety Training Information:
Antennas used for this transmitter must not exceed an antenna gain of
0 dBd. The radio must be in vehicle-mount configurations with a
maximum operating duty factor not exceeding 50%, in typical Push-toTalk configurations.
This radio is restricted to occupational use, work related operations
only where the radio operator must have the knowledge to control the
exposure conditions of its passengers and bystanders by maintaining
the minimum separation distance of following range.
Failure to observe these restrictions will result in exceeding the FCC
RF exposure limits.
Antenna Installation:
For rear deck trunk installation, the antenna must be located at least
the following range away from rear seat passengers and bystander in
order to comply with the FCC RF exposure requirements.
For roof top installation, the antenna must be placed in the center of
the roof.
Radiated frequency and Distance
MT-800
1.97 Feet
(0.6 m)
Sample Part 15 Rule Label
This device complies with part 15 of
FCC Rules.
Operation subject to that this device
does not cause harmful interference.
! CAUTION !
Device restricted to occupational use
to satisfy FCC RF exposure
compliance.
See owner’s manual for specific
operating requirement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:09:16 02:23:35Z
Modify Date                     : 2003:09:23 10:06:49-04:00
Page Count                      : 7
Creation Date                   : 2003:09:16 02:23:35Z
Mod Date                        : 2003:09:23 10:06:49-04:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 
Metadata Date                   : 2003:09:23 10:06:49-04:00
Creator                         : 
Title                           : Microsoft Word - program-eng.doc
Has XFA                         : No

EXIF Metadata provided by EXIF.tools