Genie Zx 135 70 Product Specifications Z Booms_Spec_1 22 14

2015-05-27

: Genie Genie-Zx-135-70-Product-Specifications-722947 genie-zx-135-70-product-specifications-722947 genie pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadGenie Genie-Zx-135-70-Product-Specifications- Z-Booms_Spec_1-22-14  Genie-zx-135-70-product-specifications
Open PDF In BrowserView PDF
Self-Propelled Articulating Booms
™

ZX -135/70
Specifications
Model

ZX-135/70

Range Of Motion ZX-135/70

Measurements

US

Metric

Working height maximum*
Platform height maximum
Horizontal reach max - riser extended
Horizontal reach max - riser retracted
Up and over clearance maximum riser extended
riser retracted
Below ground reach
A Platform length - 8 ft / 6 ft model
B Platform width - 8 ft / 6 ft model
C Height - stowed
D Length - stowed
E Width - axles extended
Width - axles retracted
F Wheelbase - axles extended
Wheelbase - axles retracted
G Ground clearance - center

141 ft
135 ft
59 ft 2 in
69 ft 9 in

43.15 m
41.15 m
18.03 m
21.26 m

75 ft 6 in
32 ft 6 in
19 ft 3 in
3 ft / 2 ft 6 in
8 ft / 6 ft
10 ft 1.5 in
42 ft 5 in
16 ft 6 in
8 ft 2 in
15 ft 6 in
16 ft 6 in
1 ft 3 in

23.01 m
9.91 m
5.87 m
0.91 m / 0.76 m
2.44 m / 1.83 m
3.09 m
12.93 m
5.03 m
2.49 m
4.72 m
5.03 m
0.38 m

140 ft

42.67 m

130 ft

39.62 m

120 ft

36.58 m

110 ft

33.53 m

100 ft

30.48 m

90 ft

27.43 m

80 ft

24.38 m

70 ft

21.34 m

60 ft

18.29 m

50 ft

15.24 m

40 ft

12.19 m

Productivity
Lift capacity
Platform rotation
Vertical jib rotation
Turntable rotation
Turntable tailswing - axles extended riser up
Turntable tailswing - riser down
Drive speed - stowed
Drive speed - raised
Lift speed to full height
Gradeability - stowed**
Inside turning radius - axles extended
Inside turning radius - axles retracted
Outside turning radius - axles extended
Outside turning radius - axles retracted
Controls
Tires

30 ft

600 lbs
272 kg
160°
110°
360° continuous
1 ft 1 in
0.33 m
13 ft 2 in
4.03 m
3.0 mph
4.8 km/h
0.68 mph
1.1 km/h
96 sec
45%
9 ft 11 in
3.02 m
20 ft 7 in
6.27 m
24 ft 1 in
7.34 m
28 ft 1 in
8.56 m
12 V DC proportional
445/65 D22.5 18 ply foam-filled

9.14 m

20 ft
6.1 m

10 ft

3.05 m

0 ft

0m

-10 ft

-3.05 m

-20 ft

-6.1 m

Deutz Diesel TD 2011 L04i 4-cylinder turbo diesel, 74 hp (55 kW)
Perkins Diesel 1104D-44T 4-cylinder turbo diesel, 74 hp (55 kW)
12 V DC
65 gal
246.1 L
40 gal
151.4 L

Auxiliary power unit
Hydraulic tank capacity
Fuel tank capacity

Weight***
45,200 lbs

Standards Compliance

20,502 kg

ANSI A92.5, CSA B354.4, EN 280, AS 1418.10

A

E

B

C
G
F

D

www.genielift.com

0 ft

10 ft

20 ft

30 ft

-9.14 m

0m

3.05 m

6.1 m

9.14 m 12.19 m 15.24 m 18.29 m 21.34 m

-6.1 m

-3.05 m

40 ft

50 ft

60 ft

* The metric equivalent of working height adds 2 m to platform height.
U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. See operator’s manual for
details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.

Power
Power source

-30 ft -20 ft -10 ft

70 ft

Self-Propelled Articulating Booms
™

ZX -135/70
Features
Standard Features

Easily Configured To Meet Your Needs

Options & Accessories

Measurements

Platform Options

Productivity Options

•
•
•
•

• Steel 8 ft (2.44 m) (standard)
• Steel 6 ft (1.83 m)
• Steel 8 ft (2.44 m) tri-entry

• Platform swing gate
• Half-mesh platform inserts with swing
gate
• Platform top auxiliary rail
• Welder package
• Welder Ready package
• Weld leads to the platform
• Air line to the platform
• Biodegradable hydraulic oil
• Aircraft protection package (6 ft platform
only)
• Hostile environment kit
• Deluxe hostile environment kit
• Thumb rocker steer
• Tool tray
• Light package
• Entry toe boards
• Pipe cradle (pair)
• Alarm package
• Panel cradle package
• Lockable platform control box cover
• Operator protective structure

141 ft (43.15 m) working height
69 ft 9 in (21.26 m) horizontal reach
75 ft 6 in (23.01 m) up and over clearance
Up to 600 lbs (272 kg) lift capacity

Productivity

Jib
• 12 to 20 ft (3.66 to 6.10 m) Jib-Extend™

™

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Xchassis extendable axles
12 to 20 ft (3.66 to 6.1 m) Jib-Extend
160 ft Hydraulic platform rotation
Proportional joystick controls
Hydraulic oil cooler
Drive enable
AC power cord to the platform
Horn
Hour meter
Tilt alarm
Descent alarm
360° continuous turntable rotation
Positive traction 4WD
Two speed wheel motors
Four wheel high angle steer
Four steering modes: front, rear, crab
and coordinated
• Four wheel brakes
• Configurable controls to limit lift height to
91 ft (27.74 m)

Engine Options
• 74 hp (55 kW) Deutz diesel Tier 4i
(standard)
• 74 hp (55 kW) Perkins diesel Tier 4i

Drive/Steer
• 4WD (standard)
• 4WS (standard)

Tire
• Extra-wide rough terrain foam-filled
(standard)

Power Options
• AC generator packages (110V/60Hz,
3000W or 220V/50Hz, 2500W)
• Cold weather kit
• Diesel scrubber/catalytic muffler
(Deutz and Perkins)

Power
•
•
•
•

12 V DC auxiliary power
Engine protection package
Deutz intake air heater
Swing out engine tray

* Available on select models

Genie United States

Distributed By:

18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475

Effective Date: January, 2014. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
ZX135 3.5K 0109L. Part No. 109366

www.genielift.com



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : BADStudio2
Create Date                     : 2014:01:31 18:43:39-08:00
Modify Date                     : 2014:01:31 18:43:39-08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Z-Booms_Spec_1-22-14.indd
Creator                         : BADStudio2
Document ID                     : uuid:9606a0f6-2503-42d2-bac4-bcbe2e53568f
Instance ID                     : uuid:28083728-a73d-4ff7-9144-ae2af124bcdd
Page Count                      : 2
EXIF Metadata provided by EXIF.tools

Navigation menu