Genie Zx 135 70 Product Specifications Z Booms_Spec_1 22 14
2015-05-27
: Genie Genie-Zx-135-70-Product-Specifications-722947 genie-zx-135-70-product-specifications-722947 genie pdf
Open the PDF directly: View PDF 
.
Page Count: 2
www.genielift.com
- 30 ft -20 ft -10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft 70 ft
-9.14 m -6.1 m -3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m 21.34 m
140 ft
42.67 m
130 ft
39.62 m
120 ft
36.58 m
110 ft
33.53 m
100 ft
30.48 m
90 ft
27.43 m
80 ft
24.38 m
70 ft
21.34 m
60 ft
18.29 m
50 ft
15.24 m
40 ft
12.19 m
30 ft
9.14 m
20 ft
6.1 m
10 ft
3.05 m
0 ft
0 m
-10 ft
-3.05 m
-20 ft
-6.1 m
Model ZX-135/70
* The metric equivalent of working height adds 2 m to platform height.
U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. See operator’s manual for
details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.
Range Of Motion ZX-135/70
Measurements US Metric
Working height maximum* 141 ft 43.15 m
Platform height maximum 135 ft 41.15 m
Horizontal reach max - riser extended 59 ft 2 in 18.03 m
Horizontal reach max - riser retracted 69 ft 9 in 21.26 m
Up and over clearance maximum -
riser extended 75 ft 6 in 23.01 m
riser retracted 32 ft 6 in 9.91 m
Below ground reach 19 ft 3 in 5.87 m
Platform length - 8 ft / 6 ft model 3 ft / 2 ft 6 in 0.91 m / 0.76 m
Platform width - 8 ft / 6 ft model 8 ft / 6 ft 2.44 m / 1.83 m
Height - stowed 10 ft 1.5 in 3.09 m
Length - stowed 42 ft 5 in 12.93 m
Width - axles extended 16 ft 6 in 5.03 m
Width - axles retracted 8 ft 2 in 2.49 m
Wheelbase - axles extended 15 ft 6 in 4.72 m
Wheelbase - axles retracted 16 ft 6 in 5.03 m
Ground clearance - center 1 ft 3 in 0.38 m
Productivity
Lift capacity 600 lbs 272 kg
Platform rotation 160°
Vertical jib rotation 110°
Turntable rotation 360° continuous
Turntable tailswing - axles extended riser up 1 ft 1 in 0.33 m
Turntable tailswing - riser down 13 ft 2 in 4.03 m
Drive speed - stowed 3.0 mph 4.8 km/h
Drive speed - raised 0.68 mph 1.1 km/h
Lift speed to full height 96 sec
Gradeability - stowed** 45%
Inside turning radius - axles extended 9 ft 11 in 3.02 m
Inside turning radius - axles retracted 20 ft 7 in 6.27 m
Outside turning radius - axles extended 24 ft 1 in 7.34 m
Outside turning radius - axles retracted 28 ft 1 in 8.56 m
Controls 12 V DC proportional
Tires 445/65 D22.5 18 ply foam-filled
Power
Power source Deutz Diesel TD 2011 L04i 4-cylinder turbo diesel, 74 hp (55 kW)
Perkins Diesel 1104D-44T 4-cylinder turbo diesel, 74 hp (55 kW)
Auxiliary power unit 12 V DC
Hydraulic tank capacity 65 gal 246.1 L
Fuel tank capacity 40 gal 151.4 L
Weight***
45,200 lbs 20,502 kg
Standards Compliance ANSI A92.5, CSA B354.4, EN 280, AS 1418.10
ZX™-135/70
Self-Propelled Articulating Booms
Specifi cations
A
A
B
B
C
C
D
D
E
E
F
F
G
G
Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Distributed By:
Features
www.genielift.com
* Available on select models
ZX™-135/70
Self-Propelled Articulating Booms
Platform Options
• Steel 8 ft (2.44 m) (standard)
• Steel 6 ft (1.83 m)
• Steel 8 ft (2.44 m) tri-entry
Jib
• 12 to 20 ft (3.66 to 6.10 m) Jib-Extend™
Engine Options
• 74 hp (55 kW) Deutz diesel Tier 4i
(standard)
• 74 hp (55 kW) Perkins diesel Tier 4i
Drive/Steer
• 4WD (standard)
• 4WS (standard)
Tire
• Extra-wide rough terrain foam-filled
(standard)
Productivity Options
• Platform swing gate
• Half-mesh platform inserts with swing
gate
• Platform top auxiliary rail
• Welder package
• Welder Ready package
• Weld leads to the platform
• Air line to the platform
• Biodegradable hydraulic oil
• Aircraft protection package (6 ft platform
only)
• Hostile environment kit
• Deluxe hostile environment kit
• Thumb rocker steer
• Tool tray
• Light package
• Entry toe boards
• Pipe cradle (pair)
• Alarm package
• Panel cradle package
• Lockable platform control box cover
• Operator protective structure
Power Options
• AC generator packages (110V/60Hz,
3000W or 220V/50Hz, 2500W)
• Cold weather kit
• Diesel scrubber/catalytic muffler
(Deutz and Perkins)
Options & Accessories
Measurements
• 141 ft (43.15 m) working height
• 69 ft 9 in (21.26 m) horizontal reach
• 75 ft 6 in (23.01 m) up and over clearance
• Up to 600 lbs (272 kg) lift capacity
Productivity
• Xchassis™ extendable axles
• 12 to 20 ft (3.66 to 6.1 m) Jib-Extend
• 160 ft Hydraulic platform rotation
• Proportional joystick controls
• Hydraulic oil cooler
• Drive enable
• AC power cord to the platform
• Horn
• Hour meter
• Tilt alarm
• Descent alarm
• 360° continuous turntable rotation
• Positive traction 4WD
• Two speed wheel motors
• Four wheel high angle steer
• Four steering modes: front, rear, crab
and coordinated
• Four wheel brakes
• Configurable controls to limit lift height to
91 ft (27.74 m)
Power
• 12 V DC auxiliary power
• Engine protection package
• Deutz intake air heater
• Swing out engine tray
Easily Confi gured To Meet Your Needs Standard Features
ZX135 3.5K 0109L. Part No. 109366
