Getac Technology 046 Wireless LAN Module User Manual rev02

Getac Technology Corp. Wireless LAN Module rev02

User Manual (rev02)

                        Rugged Mobile Computing Solutions V200 USER’S MANUAL
                Aug. 2012  TRADEMARKSTRADEMARKSTRADEMARKSTRADEMARKS The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. All brand and product names are trademarks or registered trademarks of their respective companies. NOTENOTENOTENOTE The information in this manual is subject to change without notice. Most screens and operating instructions in this manual are based on Windows 7. If you’re using a different version of Windows, the screens and related operations
   may not be the same. For the latest version of the manual, please visit the Getac website at www.getac.com.  ENERGY STAR® is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR® related information from www.energystar.gov. As an ENERGY STAR® Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. An ENERGY STAR® qualified computer uses 70 % less electricity than computers without enabled power management features. Earning the Earning the Earning the Earning the EEEENERGY NERGY NERGY NERGY SSSSTARTARTARTAR®®®®     When every home office is powered by equipment that has earned the ENERGY STAR®, the change will keep over 289 billion pounds of greenhouse gases out of the air.  If left inactive, ENERGY STAR® qualified computers enter a low-power mode and may use 15 watts or less. New chip technologies make power management features more reliable, dependable, and user-friendly than even just a few years ago.  Spending a large portion of time in low-power mode not only saves energy, but helps equipment run cooler and last longer.
  Businesses that use ENERGY STAR® enabled office equipment may realize additional savings on air conditioning and maintenance.  Over its lifetime, ENERGY STAR® qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years.  Power management (“sleep settings”) on computers and monitors can result in much savings annually.  Remember, saving energy prevents pollutionRemember, saving energy prevents pollutionRemember, saving energy prevents pollutionRemember, saving energy prevents pollution    Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution. By using less energy, these products help lower consumers’ utility bills, and prevent greenhouse gas emissions.
i Table of ContentsTable of ContentsTable of ContentsTable of Contents    Chapter 1Chapter 1Chapter 1Chapter 1    GGGGetting Startedetting Startedetting Startedetting Started    ........................................................................................................................................................................................    1111----1111 Getting the Computer Running ......................................... 1-2 Unpacking ................................................................ 1-2 Connecting to AC Power ............................................ 1-3 Opening and Closing the Cover ................................... 1-4 Operating in Tablet Mode ........................................... 1-5 Turning On and Off the Computer ............................... 1-7 Taking a Look at the Computer ...................................... 1-8 Front Components ..................................................... 1-8 Rear Components ..................................................... 1-10 Right-Side Components ............................................. 1-11 Left-Side Components ............................................... 1-12 Top-open Components .............................................. 1-13 Bottom Components .................................................. 1-15 Using the Accessories .................................................. 1-17 Using the Tether ..................................................... 1-17 Attaching the Handgrip Strap ...................................... 1-18 Attaching the Shoulder Strap ...................................... 1-18 Chapter Chapter Chapter Chapter 2222    OOOOperating Your Computerperating Your Computerperating Your Computerperating Your Computer    ....................................................................................................................    2222----1111 Using the Internal Keyboard ............................................2-2 Typewriter Keys ........................................................2-2 Cursor-Control Keys ..................................................2-2
ii Numeric Keypad .......................................................2-3 Function Keys ..........................................................2-4 Fn Key ...................................................................2-4 Hot Keys ................................................................2-4 Using the Touchpad ......................................................2-7 Configuring the Touchpad ............................................2-9 Navigating on the Screen ............................................. 2-10 Using the Touchscreen ............................................. 2-10 Using Multi-touch Gestures ........................................ 2-11 Using the Dual Mode Display (Optional) .................... 2-13 Using Landscape or Portrait View ............................... 2-15 Using the Input Panel ................................................. 2-17 Using the Network Features ........................................... 2-18 Using the Modem ................................................... 2-18 Using the LAN ....................................................... 2-19 Using the Wireless LAN ........................................... 2-19 Using the Bluetooth Feature ......................................... 2-21 Turning Off/On the Bluetooth Radio ........................... 2-21 Connecting to another Bluetooth Device ....................... 2-21 Using the WWAN Feature (Optional) ............................ 2-23 Installing a SIM Card .............................................. 2-23 Turning Off/On the WWAN Radio .............................. 2-24 Connecting to WWAN Network ................................... 2-25 Using the Fingerprint Scanner (Optional)........................ 2-27 Chapter Chapter Chapter Chapter 3333    MMMManaging anaging anaging anaging PowerPowerPowerPower    ....................................................................................................................................................................................    3333----1111 AC Adapter .................................................................3-2 Battery Pack ................................................................3-3 Charging the Battery Pack ..........................................3-3 Initializing the Battery Pack .........................................3-4
iii Checking the Battery Level .........................................3-4 Replacing the Battery Pack .........................................3-5 Battery Low Signals and Actions ..................................3-6 Power Management .......................................................3-8 Hibernation ...............................................................3-9 Power-Saving Tips ..................................................... 3-10 Chapter Chapter Chapter Chapter 4444    EEEExpanding Your Computerxpanding Your Computerxpanding Your Computerxpanding Your Computer    ................................................................................................................    4444----1111 Connecting an External Monitor .......................................4-2 Connecting a Serial Device.............................................4-3 Connecting a USB Device ..............................................4-4 Connecting an IEEE 1394 Device ....................................4-5 Connecting Audio Devices ..............................................4-6 Using ExpressCards ......................................................4-7 Using PC Cards...........................................................4-9 Using Smart Cards (Optional) ...................................... 4-11 Using Storage Cards ................................................... 4-12 System Memory Upgrade.............................................. 4-13 Chapter Chapter Chapter Chapter 5555    UUUUsing BIOS Setup and System Recoverysing BIOS Setup and System Recoverysing BIOS Setup and System Recoverysing BIOS Setup and System Recovery    ........................    5555----1111 BIOS Setup .................................................................5-2 When and How to Use .............................................5-2 Information Menu ......................................................5-3 Main Menu ..............................................................5-4 Advanced Menu ........................................................5-5 Security Menu ........................................................ 5-12 Boot Menu ............................................................ 5-14 Exit Menu ............................................................. 5-15 System Recovery ........................................................ 5-17
iv Chapter Chapter Chapter Chapter 6666    UUUUsing Getac Softwaresing Getac Softwaresing Getac Softwaresing Getac Software    ................................................................................................................................................    6666----1111 Using the OSD Control Panel .........................................6-2 Quick Button Setup ...................................................6-6 Using Button Manager ...................................................6-8 Using G-Manager ....................................................... 6-10 Starting G-Manager ................................................. 6-10 System Tab ............................................................ 6-11 Battery Tab ........................................................... 6-12 ECO Tab .............................................................. 6-14 Light Sensor Tab .................................................... 6-16 Ignition Tab ........................................................... 6-18 Monitoring Tab ....................................................... 6-19 GPS Status Tab ..................................................... 6-20 Using Getac Camera ................................................... 6-22 Taking Pictures ....................................................... 6-24 Shooting Videos ...................................................... 6-26 Using View Mode ................................................... 6-27 Camera Settings ..................................................... 6-31 Chapter Chapter Chapter Chapter 7777    CCCCaring for the Computeraring for the Computeraring for the Computeraring for the Computer    ............................................................................................................................    7777----1111 Protecting the Computer .................................................7-2 Using an Anti-Virus Strategy .......................................7-2 Using Action Center (for Windows 7) .........................7-2 Using the Cable Lock ................................................7-3 Taking Care of the Computer .........................................7-4 Location Guidelines ....................................................7-4 General Guidelines ....................................................7-5 Cleaning Guidelines ...................................................7-5 Battery Pack Guidelines ..............................................7-6 Touchscreen Guidelines...............................................7-7
v When Traveling ............................................................7-9     Chapter Chapter Chapter Chapter 8888    ....................................................................................................................................................................................................    TTTTroubleshootingroubleshootingroubleshootingroubleshooting     8888----1111 Preliminary Checklist ......................................................8-2 Solving Common Problems .............................................8-3 Battery Problems .......................................................8-3 Bluetooth Problems ....................................................8-3 Display Problems ......................................................8-4 Hardware Device Problems ..........................................8-5 Hard Disk Drive Problems ..........................................8-5 Keyboard, Mouse, and Touchpad Problems ....................8-6 LAN Problems ..........................................................8-6 Modem Problems ......................................................8-7 Power Management Problems ......................................8-7 Software Problems .....................................................8-8 Sound Problems .......................................................8-8 Startup Problems .......................................................8-9 WLAN Problems .......................................................8-9 Other Problems ....................................................... 8-11 Resetting the Computer ................................................ 8-12 Appendix A SAppendix A SAppendix A SAppendix A Specificationspecificationspecificationspecifications    ................................................................................................................................................................................    AAAA----1111 Appendix Appendix Appendix Appendix B RB RB RB Regulatory Informationegulatory Informationegulatory Informationegulatory Information    ................................................................................................................    BBBB----1111 On the Use of the System ........................................... B-2 Class B Regulations ................................................. B-2 UL1604 Installation Instructions .................................... B-3 Safety Notices ......................................................... B-4 On the Use of the RF Device ...................................... B-7 USA and Canada Safety Requirements and Notices ........ B-7 European Union CE Marking and Compliance Notices ..... B-10
vi
 Getting Started   1-1 Chapter 1Chapter 1Chapter 1Chapter 1     Getting StartedGetting StartedGetting StartedGetting Started    Congratulations on purchasing this rugged computer. This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer.
  1-2   Getting Started Getting the Computer RunningGetting the Computer RunningGetting the Computer RunningGetting the Computer Running    This section guides you through the procedures for getting the computer ready for operation. UnpackingUnpackingUnpackingUnpacking    After unpacking the shipping carton, you should find these standard items:  Notebook computer  Accessories: − AC adapter − AC power cord − Shoulder strap − Handgrip strap − Stylus and tether − Digitizer pen (option) − Driver disc − Documents Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the computer in the future.
 Getting Started   1-3 Connecting to AC PowerConnecting to AC PowerConnecting to AC PowerConnecting to AC Power    The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the very first time. CAUTION: Use only the AC adapter included with your computer. Using other AC adapters may damage the computer.  1. Plug the DC cord of the AC adapter to the power connector of the computer (). 2. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet ().  3. When the AC adapter is connected, power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer. CAUTION:  When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer.
  1-4   Getting Started  When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3.  Opening and Closing the CoverOpening and Closing the CoverOpening and Closing the CoverOpening and Closing the Cover    To open the top cover: 1. Pull loose the cover latch () and release the clamp (). 2. Lift up the cover (). You can tilt the cover forward or backward for optimal viewing clarity.  To close the top cover: 1. Close the display.
 Getting Started   1-5 2. Lift the cover latch and engage the clamp on the display.  Then, push in the cover latch to click it into place. Operating in Tablet ModeOperating in Tablet ModeOperating in Tablet ModeOperating in Tablet Mode    In addition to being used as a regular notebook computer (Laptop mode), your computer can also be operated in Tablet mode. In Tablet mode, you operate the computer with a stylus or digitizer pen, or a fingertip, instead of a keyboard or mouse. 1. Open the top cover so that it is almost perpendicular with the keyboard of the computer. 2. Turn the display counter-clockwise by 165o.  CAUTION: Do not rotate the display more than 165o, or attempt to rotate the display clockwise.  3. Close the computer with the display facing up.
  1-6   Getting Started  4. Lift the cover latch and engage the clamp on the display.  Then, push in the cover latch to click it into place. In Tablet mode, the computer can be operated while holding it as shown. A handgrip strap is supplied to help you hold the computer. (See “Attaching the Handgrip Strap” in this chapter for installation instructions.)
 Getting Started   1-7 Turning On and Off the ComputerTurning On and Off the ComputerTurning On and Off the ComputerTurning On and Off the Computer    Turning OnTurning OnTurning OnTurning On    Press the power button (      ). Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start.  Turning OTurning OTurning OTurning Offffffff    When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode: To...To...To...To...     Do this...Do this...Do this...Do this...    Power off (Shutdown) Use the Windows Start menu in the lower left and follow the shutdown procedure. Sleep  Press the power button*. –or– Use the Windows Start menu to put the computer in Sleep mode. Hibernate Use the Windows Start menu to put the computer in Hibernation mode. (See “Hibernation” in Chapter 3 for more information.) * “Sleep” is the default setting of the power button. You may change what the power button does in Windows Control Panel.
  1-8   Getting Started Taking a Look at the ComputerTaking a Look at the ComputerTaking a Look at the ComputerTaking a Look at the Computer    NOTE:  Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual.  You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water- and dust-proof integrity. (Engage the locking mechanism if existing.)  Front ComponentsFront ComponentsFront ComponentsFront Components     RefRefRefRef    ComponentComponentComponentComponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also     Strap HolderStrap HolderStrap HolderStrap Holder    Two buckles hold the shoulder strap.  P. 1-18  Stereo Stereo Stereo Stereo SpeakerSpeakerSpeakerSpeaker    Sends out sound and voice from your computer.   OSD Control OSD Control OSD Control OSD Control Button Button Button Button      Opens or closes the OSD (On Screen Display) control panel. P. 6-2 P1 ButtonP1 ButtonP1 ButtonP1 Button    Can be re-defined using the Button Manager utility. P. 6-8  SunlightSunlightSunlightSunlight----    reareareareadable dable dable dable ButtonButtonButtonButton         Toggles the sunlight-readable mode on or off. In sunlight-readable mode, the display brightness is increased to the highest level.
 Getting Started   1-9 RefRefRefRef    ComponentComponentComponentComponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also         CAUTION: To prevent burns to your fingers if using the computer (especially in Tablet Mode) with sunlight-readable mode turned on, do wear gloves when touching the top portion of the LCD display as it may be hot to the touch.  P2P2P2P2    ButtonButtonButtonButton    Can be re-defined using the Button Manager utility. P. 6-8  RF Button RF Button RF Button RF Button      Serves as the master on/off control of the RF radio.  P3P3P3P3    ButtonButtonButtonButton    Can be re-defined using the Button Manager utility. P. 6-8  Reset Button Reset Button Reset Button Reset Button     Serves as the CtrlCtrlCtrlCtrl+AltAltAltAlt+DelDelDelDel keyboard keys.  P. 8-12 P4P4P4P4    ButtonButtonButtonButton    Can be re-defined using the Button Manager utility. P. 6-8  Software Software Software Software Keyboard Keyboard Keyboard Keyboard Button Button Button Button      Opens or closes the software keyboard on your screen. P. 2-17 P5P5P5P5    ButtonButtonButtonButton    Can be re-defined using the Button Manager utility. P. 6-8  Top Cover Top Cover Top Cover Top Cover LatchLatchLatchLatch    Locks the top cover.  P. 1-4  Power Power Power Power ButtonButtonButtonButton        Turns the power on or off (Sleep mode by default). P. 1-7
  1-10   Getting Started Rear ComponentsRear ComponentsRear ComponentsRear Components      RefRefRefRef    ComponentComponentComponentComponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also     Audio Output Audio Output Audio Output Audio Output ConnectorConnectorConnectorConnector    Connects a set of headphones, external speakers with amplifier, or an audio recording device. P. 4-6  Mini IEEE 1394 Mini IEEE 1394 Mini IEEE 1394 Mini IEEE 1394 PortPortPortPort    Connects an IEEE 1394 device such as a scanner, printer, DVCAM, and VCR.  P. 4-5  Microphone Microphone Microphone Microphone ConnectorConnectorConnectorConnector    Connects an external microphone.  P. 4-6  USB 2.0 PortUSB 2.0 PortUSB 2.0 PortUSB 2.0 Port    Connects a USB device, such as a flash disk, printer, digital camera, joystick, and more. P. 4-4  Kensington LockKensington LockKensington LockKensington Lock    Locks the computer to a stationary object for security. P. 7-3  VGA ConnectorVGA ConnectorVGA ConnectorVGA Connector    Connects an external display monitor. (Depending on your model, this port could be a serial connector.) P. 4-2  Serial ConnectorSerial ConnectorSerial ConnectorSerial Connector    Connects a serial mouse or serial communication device. P. 4-3
 Getting Started   1-11 RightRightRightRight----Side ComponentsSide ComponentsSide ComponentsSide Components     RefRefRefRef    ComponentComponentComponentComponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also     StylusStylusStylusStylus    Serves as the input device by tapping on the touchscreen to make selections and enter information. NOTE: Some models do not have the stylus slot on this side, so you can only use the slot on the left side for storing the stylus. P. 2-10  Tether HoleTether HoleTether HoleTether Hole    Stylus can be tethered to this hole. NOTE: Depending on your model, this is on both sides of the computer or on the left side only. P. 1-17  Battery Pack Battery Pack Battery Pack Battery Pack Compartment Compartment Compartment Compartment  Inside is the battery pack that supplies power to your computer when external power is not connected. P. 3-3  Hard Disk Drive Hard Disk Drive Hard Disk Drive Hard Disk Drive Compartment Compartment Compartment Compartment     Inside is the hard disk drive.
  1-12   Getting Started LeftLeftLeftLeft----Side ComponentsSide ComponentsSide ComponentsSide Components      RefRefRefRef    ComponentComponentComponentComponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also     Tether HoleTether HoleTether HoleTether Hole    Stylus can be tethered to this hole.  P. 1-17  Stylus SlotStylus SlotStylus SlotStylus Slot    Stylus can be stored in this slot.   Power ConnectorPower ConnectorPower ConnectorPower Connector    Connects the AC adapter.  P. 1-3  USB USB USB USB 3.03.03.03.0    PortPortPortPort    Connects a USB device, such as a flash disk, printer, digital camera, joystick, and more. P. 4-4  RJRJRJRJ----11111111    ConnectorConnectorConnectorConnector    Connects the telephone line.  P. 2-18  RJRJRJRJ----45454545    ConnectorConnectorConnectorConnector    Connects the LAN cable.  P. 2-19  ExpressCard Slot ExpressCard Slot ExpressCard Slot ExpressCard Slot (upper)    Accepts an ExpressCard for additional functions. P. 4-7 PCPCPCPC    Card Card Card Card SlotSlotSlotSlot    (lower) Accepts a PC card for additional functions.  P. 4-9 Depending on your model, the two slots could be a different combination (as below).
 Getting Started   1-13 Smart Card Smart Card Smart Card Smart Card Reader Reader Reader Reader (upper)    Accepts a smart card for additional security feature. P. 4-11 RefRefRefRef    ComponentComponentComponentComponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also     ExpressCard Slot ExpressCard Slot ExpressCard Slot ExpressCard Slot (lower)    Accepts an ExpressCard for additional functions. P. 4-7  SD Card ReaderSD Card ReaderSD Card ReaderSD Card Reader    Accepts a SD/SDHC/SDXC card for removable storage media. P. 4-12  TopTopTopTop----open Componentsopen Componentsopen Componentsopen Components     RefRefRefRef    ComComComComponentponentponentponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also     Camera LensCamera LensCamera LensCamera Lens    Allows you to use your computer’s camera function. The lens supports 2 MP (mega pixel). P. 6-22
  1-14   Getting Started RefRefRefRef    ComComComComponentponentponentponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also    It can be rotated.  TouchscreenTouchscreenTouchscreenTouchscreen    Displays and receives information for the computer. P. 2-10  Light SensorLight SensorLight SensorLight Sensor    Detects the surrounding lighting condition for automatic adjustment of the LCD brightness and optional keyboard backlight.   Fingerprint Fingerprint Fingerprint Fingerprint Scanner Scanner Scanner Scanner (optional)    Uses fingerprint verification to protect your computer against unauthorized access. P. 2-27  KeyboardKeyboardKeyboardKeyboard    Serves as the data input device.  P. 2-2  TouchpadTouchpadTouchpadTouchpad    Serves as the pointing device.  P. 2-7  IndicatorsIndicatorsIndicatorsIndicators    Show the current status of the computer’s devices.    PowerPowerPowerPower     Lights green when the computer is turned on. P. 1-7 Lights yellow when the computer is in Sleep mode.   Battery Battery Battery Battery ChargeChargeChargeCharge Lights green when the battery is fully charged. P. 3-3 Lights yellow when the battery is being charged. Blinks yellow when the battery’s capacity is below 10%. P. 3-6 Blinks green and yellow by turns to indicate charging is suspended because the battery’s temperature is either too high or too low.    Hard Disk Hard Disk Hard Disk Hard Disk Drive InDrive InDrive InDrive In----UseUseUseUse Lights green when the computer is accessing the hard disk drive.
 Getting Started   1-15 RefRefRefRef    ComComComComponentponentponentponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also    Blinks red when the optional hard disk drive heater is on for low temperature operation. P. 8-9   RFRFRFRF Lights when the radio frequency is on.    Num LockNum LockNum LockNum Lock Lights when Num Lock is on.  P. 2-3   Caps LockCaps LockCaps LockCaps Lock  Lights when Caps Lock is on.  P. 2-2  Bottom ComponentsBottom ComponentsBottom ComponentsBottom Components     RefRefRefRef    ComponentComponentComponentComponent     DescriptionDescriptionDescriptionDescription     See AlsoSee AlsoSee AlsoSee Also     Strap HolderStrap HolderStrap HolderStrap Holder    Four bottom hooks hold the handgrip strap.  P. 1-18  Docking Docking Docking Docking ConnectorConnectorConnectorConnector    Inside is the docking connector for connecting an office dock or vehicle dock (purchased separately).
  1-16   Getting Started  Memory SlotsMemory SlotsMemory SlotsMemory Slots    Inside are the memory slots for expanding the memory size of your computer. P. 4-13 SIM Card Slot SIM Card Slot SIM Card Slot SIM Card Slot (optional)    Inside is the SIM card slot.  P. 2-23
 Getting Started   1-17 Using the AccessoriesUsing the AccessoriesUsing the AccessoriesUsing the Accessories    Using the TetherUsing the TetherUsing the TetherUsing the Tether    A tether is provided for attaching the stylus to your computer. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by  below). Then, insert the other end through the first loop (as indicated by  below) and pull it tight.  2. Insert the other loop end to the tether hole on the computer (as indicated by  below). Then, insert the stylus end through the loop (as indicated by  below) and pull it tight.
  1-18   Getting Started  Attaching the Handgrip StrapAttaching the Handgrip StrapAttaching the Handgrip StrapAttaching the Handgrip Strap    To use the handgrip strap, attach its four loops to the four bottom hooks on your computer. Make sure the loops are securely hooked.  When you need to operate and hold your computer at the same time, insert your hand through the strap for a firm grip. Attaching the Shoulder StrapAttaching the Shoulder StrapAttaching the Shoulder StrapAttaching the Shoulder Strap    To use the shoulder strap, secure the snap hooks to the two buckles on your computer. (Select models have four buckles for different positioning of the strap.)
 Getting Started   1-19  CAUTION:  The strap has been designed to carry only the weight of the computer. Therefore, be sure that the strap does not carry a weight that exceeds the weight of the computer. The strap may accidentally come loose from the computer.  Do not use a strap that is damaged or about to tear.
 Operating Your Computer   2-1 Chapter 2Chapter 2Chapter 2Chapter 2     Operating Your ComputerOperating Your ComputerOperating Your ComputerOperating Your Computer    This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer. CAUTION:  Do not expose your skin to the computer when operating it in a very hot or cold environment.  The computer can get uncomfortably warm when you use it in high temperatures. As a safety precaution in such a circumstance, do not place the computer on your lap or touch it with your bare hands for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn.
 2-2   Operating Your Computer  Using the Internal KeyboardUsing the Internal KeyboardUsing the Internal KeyboardUsing the Internal Keyboard    Your keyboard has all the standard functions of a full-sized computer keyboard plus an FnFnFnFn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories:  Typewriter keys  Cursor-control keys  Numeric keys  Function keys Typewriter KeysTypewriter KeysTypewriter KeysTypewriter Keys    Typewriter keys are similar to the keys on a typewriter. Several keys are added such as the CtrlCtrlCtrlCtrl, AltAltAltAlt, EscEscEscEsc, and lock keys for special purposes. When the lock keys (Caps Lockaps Lockaps Lockaps Lock and Num LkNum LkNum LkNum Lk) are pressed, their corresponding indicators light up. The Control (CtrlCtrlCtrlCtrl) / Alternate (AltAltAltAlt) key is normally used in combination with other keys for program-specific functions. The Escape (EscEscEscEsc) key is usually used for stopping a process. Examples are exiting a program and canceling a command. The function depends on the program you are using. CursorCursorCursorCursor----Control KeysControl KeysControl KeysControl Keys    Cursor-control keys are generally used for moving and editing purposes. NOTE: The word “cursor” refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes.
 Operating Your Computer   2-3  Numeric KeypadNumeric KeypadNumeric KeypadNumeric Keypad    A 15-key numeric keypad is embedded in the typewriter keys as shown next:  Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE:  When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press FnFnFnFn and then the letter without turning Num Lock off.  Some software may not be able to use the numeric keypad on the computer. If so, use the numeric keypad on an external keyboard instead.
 2-4   Operating Your Computer  Function KeysFunction KeysFunction KeysFunction Keys    On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs. Fn KeyFn KeyFn KeyFn Key    The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter “Fn” and the alternative functions are identified by the color of blue on the keytop. To perform a desired function, first press and hold Fn, then press the other key. Hot KeysHot KeysHot KeysHot Keys    Hot keys refer to a combination of keys that can be pressed any time to activate special functions of the computer. Most hot keys operate in a cyclic way. Each time a hot key combination is pressed, it shifts the corresponding function to the other or next choice. You can easily identify the hot keys with the icons imprinted on the keytop. The hot keys are described next. KeyKeyKeyKey     DescriptionDescriptionDescriptionDescription     Switches the keyboard backlight on and off (optional).  Switches the wireless radio on and off.  Decreases the sound volume.
 Operating Your Computer   2-5 KeyKeyKeyKey     DescriptionDescriptionDescriptionDescription     Increases the sound volume.  Switches the display output when external devices are connected.  Decreases the LCD brightness (20 levels).  Increases the LCD brightness (20 levels).  Switches the touchscreen on and off (option).  Switches the touchpad on and off.  Switches the system sound output off (mute) and on.  Switches LCD backlight on and off.  Serves as the sleep button that you can define with Windows’ Power OptionsPower OptionsPower OptionsPower Options. (See the “Power Management” in Chapter 3.)  Windows KeysWindows KeysWindows KeysWindows Keys    The keyboard has two keys that perform Windows-specific functions:   Windows Logo key and   Application key.
 2-6   Operating Your Computer  The   Windows Logo key opens the StartStartStartStart menu and performs software-specific functions when used in combination with other keys. The   Application key usually has the same effect as a right mouse click. (See your Windows manual for more information.)
 Operating Your Computer   2-7 Using the TouchpadUsing the TouchpadUsing the TouchpadUsing the Touchpad    CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface.  NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force.  The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.  The touchpad consists of a rectangular pad (work surface) and a left and right buttons. To use the touchpad, place your forefinger or thumb on the pad. The rectangular pad acts like a miniature duplicate of your display. As you slide your fingertip across the pad, the pointer (also called cursor) on the screen moves accordingly. When your finger reaches  the edge of the pad, simply relocate yourself by lifting the finger and placing it on the other side of the pad. Here are some common terms that you should know when using the touchpad:
 2-8   Operating Your Computer  TermTermTermTerm     ActionActionActionAction    Point  Move your finger on the pad until the cursor points to the selection on the screen. Click  Press and release the left button. –or– Tap gently anywhere on the pad. Double-click  Press and release the left button twice in quick succession. –or– Tap twice on the pad rapidly. Drag and drop Press and hold the left button, then move your finger until you reach your destination (drag). Finally, release the button (drop) when you finish dragging your selection to the destination. The object will drop into the new location. –or– Gently tap twice on the pad and on the second tap, keep your finger in contact with the pad. Then, move your finger across the pad to drag the selected object to your destination. When you lift your finger from the pad, the selected object will drop into place. Scroll  To scroll is to move up and down or left and right in the working area on the screen. To move vertically, place your finger on the right or left edge of the pad and slide your finger up and down along the edge. To move horizontally, place your finger on the top or bottom edge of the pad and slide your finger left and right. This function works only after you install the touchpad driver supplied with the computer and it may not work for all applications. TABLE NOTE:TABLE NOTE:TABLE NOTE:TABLE NOTE: If you swap the left and right buttons, “tapping” on the touchpad as an alternative method of pressing the left button will no longer be valid.
 Operating Your Computer   2-9 Configuring the TouchpadConfiguring the TouchpadConfiguring the TouchpadConfiguring the Touchpad    You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on. To configure the touchpad, go to Control PanelControl PanelControl PanelControl Panel  Mouse PropertiesMouse PropertiesMouse PropertiesMouse Properties.
 2-10   Operating Your Computer  Navigating on the ScreenNavigating on the ScreenNavigating on the ScreenNavigating on the Screen    The screen of your computer is touch-sensitive. You can control the location of the cursor/pointer on the screen using your finger or the included stylus or digitizer pen to communicate with the computer. CAUTION: Do not use sharp objects on the LCD display. Doing so may damage the display surface. Use your finger or the included stylus or digitizer pen.  Using the TouchscreenUsing the TouchscreenUsing the TouchscreenUsing the Touchscreen    If your computer is equipped with the touchscreen feature, you can use your finger or the included stylus to navigate and select objects on the screen.  The following table shows how you use the touchscreen to obtain equivalent mouse functions. Term/ActionTerm/ActionTerm/ActionTerm/Action    Equivalent Mouse Equivalent Mouse Equivalent Mouse Equivalent Mouse FunctionFunctionFunctionFunction    Tap: Touch the screen once.  Click/Point Double-tap: Touch the screen twice rapidly.  Double-click
 Operating Your Computer   2-11 Term/ActionTerm/ActionTerm/ActionTerm/Action    Equivalent Mouse Equivalent Mouse Equivalent Mouse Equivalent Mouse FunctionFunctionFunctionFunction    Tap and hold: Tap and hold until a popup menu appears.  Right-click Drag: Hold the stylus (or finger) on the screen and drag across the screen until reaching your destination. Drag   Using MultiUsing MultiUsing MultiUsing Multi----touch Gesturestouch Gesturestouch Gesturestouch Gestures    If your computer model comes with multi-touch-capable screen and Windows 7, you can interact with your computer by placing two fingers on the screen. The movement of the fingers across the screen creates “gestures,” which send commands to the computer. Here are the multi-touch gestures that you can use: GesturesGesturesGesturesGestures    ActionsActionsActionsActions    (       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)    DescriptionsDescriptionsDescriptionsDescriptions    Pan (Scroll)      or  Drag 1 or 2 fingers up or down. Use panning to see another part of a page that has scroll bars.  Zoom (Pinch)  Move two fingers apart/toward each other. Use zooming to make an item (a photo for example) on the screen larger or smaller. The gesture works in applications that support mouse wheel zooming.
 2-12   Operating Your Computer  GesturesGesturesGesturesGestures    ActionsActionsActionsActions    (       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)    DescriptionsDescriptionsDescriptionsDescriptions    Rotate or   Move two fingers in opposing directions. -or- Use one finger to pivot around another. Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counter- clockwise). The gesture works in applications that support the specific gesture. Press and Tap  Press on target and tap using a second finger. Use press and tap to access the shortcut menu. Two- finger Tap  Tap two fingers at the same time (where the target is in the midpoint between the fingers). The function is defined by applications that support the specific gesture.
 Operating Your Computer   2-13 GesturesGesturesGesturesGestures    ActionsActionsActionsActions    (       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)    DescriptionsDescriptionsDescriptionsDescriptions    Flicks Make quick drag gestures in the desired direction. Flick left or right to navigate back and forward in a browser and other applications. The gesture works in most applications that support back and forward.  Using the Dual Mode Display (Optional)Using the Dual Mode Display (Optional)Using the Dual Mode Display (Optional)Using the Dual Mode Display (Optional)    Dual mode display incorporates both touchscreen and digitizer functions. The display is set to Touchscreen mode by default. Touchscreen mode provides all the functionalities that an ordinary touchscreen has. When the computer receives signals from the digitizer pen, the display automatically switches to Digitizer mode.   Here are some common terms that you should know when using the digitizer feature:
 2-14   Operating Your Computer  TermTermTermTerm          ActionActionActionAction    Move  Move the cursor pointed by the digitizer pen. Click/Point  Tap gently on the display. Double-click  Tap twice on the display rapidly. Drag and drop  Tap lightly on the display and move your digitizer pen until you reach your destination (drag). Finally, release your digitizer pen (drop) when you finish dragging your selection to the destination. The object will drop into the new location. Right-click  Press and hold down the digitizer pen button (A), then tap gently the object.  CAUTION:  When the LCD display is used alone or with an external display simultaneously, the digitizer function cannot be used when the area of either display is set larger than the default setting of the display resolution.  Even when only an external display is in use, the cursor will move on the external display if you touch the surface of the LCD display with the pen or bring the pen close to the surface of the LCD display when the digitizer driver is active. Therefore, do not touch the LCD display when only an external display is in use.  The active digitizer feature cannot be used in the BIOS Setup program or when using the full screen in DOS mode.
 Operating Your Computer   2-15  NOTE:  You can move the cursor by bringing the digitizer pen close to the screen, without actually touching the screen’s surface.  Do not move the digitizer pen too quickly. If the pen moves too quickly, the cursor may be unable to follow its movement.  If you cannot click on the edge of the screen, hold the digitizer pen perpendicular to the display and try clicking again.  Using Landscape or Portrait ViewUsing Landscape or Portrait ViewUsing Landscape or Portrait ViewUsing Landscape or Portrait View    To rotate the display, press the button          located on the front of your computer to open the OSD Control Panel and click  . Each time this Rotate button is clicked, the screen display rotates counter-clockwise by 90O. For a Model without WWAN ModuleFor a Model without WWAN ModuleFor a Model without WWAN ModuleFor a Model without WWAN Module    Primary Primary Primary Primary LandscapeLandscapeLandscapeLandscape    Primary Primary Primary Primary PortraitPortraitPortraitPortrait    Secondary Secondary Secondary Secondary LandscapeLandscapeLandscapeLandscape    Secondary Secondary Secondary Secondary PortraitPortraitPortraitPortrait    Primary Primary Primary Primary LandscapeLandscapeLandscapeLandscape          For a Model with WWAN ModuleFor a Model with WWAN ModuleFor a Model with WWAN ModuleFor a Model with WWAN Module    Primary Primary Primary Primary LaLaLaLandscapendscapendscapendscape    Secondary Secondary Secondary Secondary LandscapeLandscapeLandscapeLandscape    Primary LandscapePrimary LandscapePrimary LandscapePrimary Landscape        Display Display Display Display Display Display Display Display
 2-16   Operating Your Computer  NOTE:  If the screen display resolution has been set to 800×600 pixels, you can rotate the display to Primary Landscape and Secondary Landscape only.  While the display is rotated: –  Do not set the display resolution larger than the resolution of the LCD    display. –  If you exit Windows, the next time Windows is started up, the operation   of the touchpad will not match the display angle for a few seconds. –  The computer’s performance will decrease slightly. –  If a video is played, the picture may not be displayed properly or the    sound may be broken up. This problem can be corrected by rotating    the display to Primary Landscape. –  The touchpad’s scroll function does not work.  The display cannot be rotated when DOS mode is set to “Full Screen.”
 Operating Your Computer   2-17 Using the Input PanelUsing the Input PanelUsing the Input PanelUsing the Input Panel    Use the Input Panel to enter text and perform various keyboard functions. There are two types of Input Panels for you to use in Windows 7:  Touch KeyboardTouch KeyboardTouch KeyboardTouch Keyboard allows you to enter text by tapping the keys with your stylus, like pressing the keys on a standard keyboard.   Writing PadWriting PadWriting PadWriting Pad allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text.  To open the Input Panel, tap the Input Panel tab, which appears by default on the left edge of the screen. (You can also press the   button on the front of the computer to open or close the Input Panel.) To switch between the two types, tap  or    at the upper left corner of the Input Panel. NOTE: For more information on using the Input Panel, see Windows’ online help.
 2-18   Operating Your Computer  Using the Network FeaturesUsing the Network FeaturesUsing the Network FeaturesUsing the Network Features    Using the ModemUsing the ModemUsing the ModemUsing the Modem    The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board. To connect the telephone line to the modem, connect one end of the modem cable to the RJ-11 connector on the computer and the other end to the phone line.  NOTE:  When using the communication software, you may have to disable power management. Do not enter the Sleep mode when using the communication software.  Set parameters such as modem speed (baud rate) and line type (pulse dialing or tone dialing).
 Operating Your Computer   2-19 Using the LANUsing the LANUsing the LANUsing the LAN    The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub.  Using the Wireless LANUsing the Wireless LANUsing the Wireless LANUsing the Wireless LAN    The WLAN module of your computer supports IEEE 802.11a/g/n. Turning On/Off the WLAN Radio Turning On/Off the WLAN Radio Turning On/Off the WLAN Radio Turning On/Off the WLAN Radio     NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless devices in aircraft as this may interfere with flight safety. Remember to turn off wireless LAN when using your computer in the airplane. FOR WIFI 5G BAND STATEMENT  The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.  To turn on or off the wireless radio (including the WLAN radio), press the button         located on the front of your computer or spress Fn+F1Fn+F1Fn+F1Fn+F1.  A small window pops up on the screen to indicate the status.
 2-20   Operating Your Computer  Connecting to a Wireless NetworkConnecting to a Wireless NetworkConnecting to a Wireless NetworkConnecting to a Wireless Network    To connect to a wireless network: 1. Make sure that the WLAN function is enabled (as described above). The Wireless Network icon   on the taskbar should appear without a red X. 2. Tap the Wireless Network icon   on the taskbar. (An orange light in the icon  indicates connections are available.) 3. In the list of available wireless networks, tap a network, and then tap ConnectConnectConnectConnect.  4. Some networks require a network security key or passphrase. To connect to one of those networks, ask your network administrator or Internet service provider (ISP) for the security key or passphrase. For more information on setting a wireless network connection, refer to Windows online help. NOTE: You can use Intel® PROSet Wireless to take full advantage of the WiFi capabilities of your computer.  See the Help of the utility for instructions.
 Operating Your Computer   2-21 Using the BlueUsing the BlueUsing the BlueUsing the Bluetooth Featuretooth Featuretooth Featuretooth Feature    Your computer incorporates the Bluetooth 4.0 capability for short-range (about 50 meters) wireless communications between devices without requiring a cable connection. With Bluetooth, data can be transmitted through walls, pockets and briefcases as long as two devices are within range.  Turning Off/On the Bluetooth RadioTurning Off/On the Bluetooth RadioTurning Off/On the Bluetooth RadioTurning Off/On the Bluetooth Radio    To turn on or off the wireless radio (including the Bluetooth radio), press the button         located on the front of your computer or spress Fn+F1Fn+F1Fn+F1Fn+F1.  A small window pops up on the screen to indicate the status. When the Bluetooth radio is on, the Bluetooth icon   appears on the Windows taskbar. Connecting to another Bluetooth DeviceConnecting to another Bluetooth DeviceConnecting to another Bluetooth DeviceConnecting to another Bluetooth Device    1. Make sure that the Bluetooth function is enabled (as described above). 2. Make sure that the target Bluetooth device is turned on, discoverable and within close range. (See the documentation that came with the Bluetooth device.) 3. To search for Bluetooth devices, right click the Bluetooth icon   and select Add a Device.  4. Select the device you want to connect from the search results.
 2-22   Operating Your Computer   5. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth feature, see Windows’ online Help.
 Operating Your Computer   2-23 Using the WWAN Feature (OptionUsing the WWAN Feature (OptionUsing the WWAN Feature (OptionUsing the WWAN Feature (Optional)al)al)al)    A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular network technologies to transfer data. The WWAN module of your computer supports 3G or 4G LTE depending on your model. NOTE: Your computer only supports data transmission; voice transmission is not supported.  Installing a SIM CardInstalling a SIM CardInstalling a SIM CardInstalling a SIM Card    To use the WWAN feature to connect to the Internet, you need to subscribe to the service and acquire a SIM card from a mobile phone network service provider. To install the SIM card, follow these steps: 1. Turn off the computer and disconnect the AC adapter. 2. Carefully place the computer upside down. 3. Remove the four screws to open the compartment cover.
 2-24   Operating Your Computer  4. Locate the SIM card slot. Slide the locking tab of the SIM card slot inward to unlock. Lift the slot up and, noting the orientation, insert the SIM card into the slot. Close the slot and slide the locking tab outward to secure the card in place.  5. Slide the locking tab outward to secure the SIM card in place. 6. Close the compartment cover and secure with four screws. Turning Off/On the WWAN RadioTurning Off/On the WWAN RadioTurning Off/On the WWAN RadioTurning Off/On the WWAN Radio    CAUTION:   For SAR STATEMENT  FCC RF Radiation Exposure Statement For body worn operation, this device has been tested and meets FCC RF exposure guidelines that positions the EUT a minimum of 0 cm from the body SAR information: 1.WWAN transmitter : 0.142W/kg (1g) 2.WLAN transmitter: 0.376 W/kg (1g)   Locking tab
 Operating Your Computer   2-25 To turn on or off the wireless radio (including the WWAN radio), press the button         located on the front of your computer. A small window pops up on the screen to indicate the status.  Connecting to WWAN NetworkConnecting to WWAN NetworkConnecting to WWAN NetworkConnecting to WWAN Network    1. Make sure that the SIM card is inserted and WWAN function is enabled (as described above). 2. On Windows desktop, double-click the AirCard WatcherAirCard WatcherAirCard WatcherAirCard Watcher shortcut. The screen as below appears.  3. If the radio is currently off, click Turn Radio OnTurn Radio OnTurn Radio OnTurn Radio On to turn on the radio. 4. Use AirCard Watcher to manage your broadband wireless network connections such as:  Connect to the Internet  Configure user options  Send and receive SMS messages
 2-26   Operating Your Computer   Manage profiles  Use GPS to track your position (for models having the GPS module) NOTE: For detailed information on using AirCard Watcher, see the program’s online help.
 Operating Your Computer   2-27 Using the FingerpriUsing the FingerpriUsing the FingerpriUsing the Fingerprint Scanner nt Scanner nt Scanner nt Scanner (Optional)(Optional)(Optional)(Optional)  CAUTION:   We shall not be liable for any loss or damage whatsoever resulting from your use of the fingerprint scanner or neglect of fingerprint scanner use, or any data loss resulting from such developments as fingerprint authentication malfunctioning.  It is not recommended that you use the fingerprint scanner in a below-freezing temperature. The moisture on your finger can freeze to the scanner’s metal surface when you touch it, resulting in a failed operation.  The fingerprint scanner provides a strong authentication mechanism based on fingerprint recognition. It features:  Website Log On Logon to your web accounts like banks, webmail, and more with a simple swipe of your finger.   Windows Log On Logon to Microsoft® Windows® with a simple swipe of your finger every time you turn on your computer or log onto your desktop.   QuickLaunch Quickly launch all your favorite websites, open files and folders, and log in to your accounts with a simple swipe of your finger.   KeepSafe  Protect your pictures, personal files, and folders using your fingerprint so only you can access them. NOTE: You can register a fingerprint only after creating a password for the Windows user account.
 2-28   Operating Your Computer  To register your fingerprint, click StartStartStartStart  All ProgramsProgramsProgramsPrograms  AuthenTeAuthenTeAuthenTeAuthenTec TrueSuitec TrueSuitec TrueSuitec TrueSuite     AuthenTec TrueSuiteAuthenTec TrueSuiteAuthenTec TrueSuiteAuthenTec TrueSuite. Click the finger you want to register and follow the onscreen instructions to complete.  You can then use the Fingerprint Software to set up how the fingerprint authentication works.    App StoreSettings Options Help
 Operating Your Computer   2-29 For detailed information, click    the Help button of the software.
 Managing Power   3-1 Chapter 3Chapter 3Chapter 3Chapter 3     Managing PowerManaging PowerManaging PowerManaging Power    Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
 3-2   Managing Power AC AdapterAC AdapterAC AdapterAC Adapter    CAUTION:  The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter.  The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer for the appropriate power cord.  When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or computer.  When unplugging the connector, always hold the plug head. Never pull on the cord.  The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because your computer runs on DC power, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power. The adapter operates on any voltage in the range of 100~240 V AC.
 Managing Power   3-3 Battery PackBattery PackBattery PackBattery Pack    The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack” section in Chapter 7.  ChargingChargingChargingCharging    the Battery Packthe Battery Packthe Battery Packthe Battery Pack    NOTE:  Charging will not start if the battery’s temperature is below 0 °C (32 °F) or above 40 °C (104 °F); the charging process will stop if the battery’s temperature gets above 60 °C (140 °F). To avoid damaging the battery under this situation, disconnect the AC adapter and wait for the battery to return to room temperature before charging again.  During charging, do not disconnect the AC adapter before the battery has been fully charged; otherwise you will get a prematurely charged battery.  To charge the battery pack, connect the AC adapter to the computer and an electrical outlet. The Battery Charge Indicator (   ) on the computer glows yellow to indicate that charging is in progress. You are advised to keep the computer power off while the battery is being charged. When the battery is fully charged, the Battery Charge Indicator lights green. It takes approximately 3 hours to fully charge the Li-Ion battery pack when the computer is off, and approximately 6 hours to fully charge the Li-Ion battery pack when the computer is on.
 3-4   Managing Power CAUTION: After the computer has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery.  NOTE: The battery level may automatically lessen due to the self-discharge process (0.21 % per day), even when the battery pack is fully charged (100 %). This happens no matter if the battery pack is installed in the computer.  Initializing the Battery PackInitializing the Battery PackInitializing the Battery PackInitializing the Battery Pack    You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. A tool called “Gauge Reset” is provided for the purpose. See “Gauge Reset” in Chapter 6 for information on using the tool. Checking the Battery Level  Checking the Battery Level  Checking the Battery Level  Checking the Battery Level      NOTE: Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the computer.  By Operating SystemBy Operating SystemBy Operating SystemBy Operating System    You can check the approximate battery level using the battery meter function of the operating system. To read the battery level in Windows, click the battery icon on the taskbar.  By Gas GaugeBy Gas GaugeBy Gas GaugeBy Gas Gauge    On the exterior side of the battery pack is a gas gauge for displaying the estimated battery charge. When the battery pack is not installed in the computer and you want
 Managing Power   3-5 to know the battery charge, you can press the switch with a pointed device to see the corresponding value of indicator segment that light green.   The value of the corresponding green segment indicates the relative percentage of the battery charge. The battery pack is fully discharged when you see no segment glowing green. Replacing the Battery PackReplacing the Battery PackReplacing the Battery PackReplacing the Battery Pack    CAUTION:  There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturer’s optional battery packs. Discard used batteries according to the dealer’s instructions.  Do not attempt to disassemble the battery pack.  If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To replace the battery pack, follow these steps: 1. Make sure that the computer is not turned on or connected to AC power. 2. Locate the battery compartment on the right side of the computer. 3. Slide the door lock toward the left to unlock (). Then slide the door latch downward to open the door (). Switch
 3-6   Managing Power  4. Pull the ribbon strip to remove the battery pack.  5. With the ribbon strip facing outward, slide the new battery pack all the way into the slot. 6. Close the door. Make sure the door latch clicks into place. Then, slide the door lock toward the right. Battery Low Battery Low Battery Low Battery Low SignaSignaSignaSignals and Actionls and Actionls and Actionls and Actionssss    The battery icon   changes appearance to display the current state of the battery. Battery Battery Battery Battery IconIconIconIcon    Battery LevelBattery LevelBattery LevelBattery Level     DescriptionDescriptionDescriptionDescription     Discharging  The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level.  Low  The battery charge has reached the low-battery level (10% by default).  Critically low The battery charge has reached the critical battery level (5% by default).  By default, Windows will display a notification and put your computer into Hibernation.
 Managing Power   3-7 When the battery is low, the computer’s Battery Charge Indicator (   ) also blinks red to alert you to take actions. Always respond to low-battery by connecting the AC adapter, placing your computer in Hibernation mode, or turning off the computer.
 3-8   Managing Power Power ManagementPower ManagementPower ManagementPower Management    Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows’ power management works in this way: What...What...What...What...     When...When...When...When...    Power to the hard disk is turned off When the hard disk has been idle for a set period. Power to the display is turned off When the display has been idle for a set period. The computer enters the Sleep mode. The hard disk and display are turned off and the entire system consumes less power. When the entire system has been idle for a set period. When you manually activate the mode. The computer enters the Hibernation mode. (See the next subsection for more information.) When the entire system has been idle for a set period. When you manually activate the mode.  For detailed information on power management, see Windows’ Help.
 Managing Power   3-9 HibernationHibernationHibernationHibernation    Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications. The computer stores the state of your computer to a file on the hard disk and then shuts down. The next time you turn on your computer, you return to exactly where you left off.
 3-10   Managing Power PowerPowerPowerPower----Saving TipsSaving TipsSaving TipsSaving Tips    Aside from enabling your computer’s power saving mode (see previous section), you can do your part to maximize the battery’s operating time by following these suggestions.  Enter power saving mode when using battery power.  Do not disable automatic power management features.  Decrease the LCD brightness to the lowest comfortable level.  Shorten the length of time before Windows turn off the display.  Many USB devices use power just by being connected. If you use a USB mouse, you can save power by disconnecting the mouse and using the touchpad. If you use a USB flash drive, unplug it when you are not using it.  Remove the card (such as PC card, ExpressCard, and Smart Card) if not using it.  Turn off the wireless radio if you are not using the wireless module (such as WLAN, Bluetooth, or WWAN).  Turn off the computer when you are not using it.
 Expanding Your Computer   4-1 Chapter 4Chapter 4Chapter 4Chapter 4     Expanding Your Expanding Your Expanding Your Expanding Your ComputerComputerComputerComputer    You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
 4-2   Expanding Your Computer  Connecting an External MonitorConnecting an External MonitorConnecting an External MonitorConnecting an External Monitor    If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2. Plug the monitor’s D-type signal connector to the computer’s VGA connector.  3. Plug one end of the monitor’s power cord into the power socket on the monitor and the other end to an electrical outlet. 4. To use the monitor, turn on the monitor before turning on the computer. 5. The monitor should respond by default. If not, you can switch the display to the monitor or to both (simultaneous display), or to multi-display by pressing the FnFnFnFn+F5F5F5F5 hot key. In Windows, you can also change the display through the settings in DisplayDisplayDisplayDisplay Properties. 6. You can change display settings through your operating system. See your operating system documentation or online help for specific information. CAUTION: Do not disconnect the external monitor while the computer is in the Sleep mode or Hibernation mode. If no external monitor is connected when the computer resumes, the LCD might not display properly.
 Expanding Your Computer   4-3 Connecting a Serial DeviceConnecting a Serial DeviceConnecting a Serial DeviceConnecting a Serial Device    Your computer has one or two serial port (depending on model) for connecting a serial device such as a serial mouse or serial communication device (modem). Follow this procedure to connect a serial device: 1. Make sure the computer is not turned on 2. Plug the device cable to the serial port on the rear of the computer.  3. Turn on the computer. NOTE: Portable modems that derive power through the serial port cannot be used with the computer. Instead, use a modem that is powered by its own internal battery or external AC power.
 4-4   Expanding Your Computer  Connecting a USB DeviceConnecting a USB DeviceConnecting a USB DeviceConnecting a USB Device    Your computer has three USB ports (two USB 3.0 ports at the left side and one USB 2.0 port at the back) for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. USB 3.0 supports a transfer rate up to 5 Gbit/s and USB 2.0 a transfer rate up to 12 MB/s. To connect a USB device, plug the device cable to a matching USB port.
 Expanding Your Computer   4-5 Connecting an IEEE 1394 DeviceConnecting an IEEE 1394 DeviceConnecting an IEEE 1394 DeviceConnecting an IEEE 1394 Device    Your computer has a mini IEEE 1394a port for connecting IEEE 1394 devices that include not only computer peripheral devices such as scanner, printer and high-quality CCD, but also consumer electronic equipment such as DVCAM and VCR. To connect an IEEE 1394 device, prepare an IEEE 1394 cable. Plug the appropriate end of the cable to the computer’s mini IEEE 1394 connector and the other end to the device’s corresponding connector.
 4-6   Expanding Your Computer  Connecting Audio DevicesConnecting Audio DevicesConnecting Audio DevicesConnecting Audio Devices    For higher audio quality, you can send or receive sound through external audio devices.   Audio Output Connector Audio Output Connector Audio Output Connector Audio Output Connector (   )        can be connected to speakers, headphones, or earphone set.  Microphone Connector Microphone Connector Microphone Connector Microphone Connector (   )     can be connected to an external microphone for recording voice or sound. NOTE:  After connecting an external audio device, make sure that you specify the use of the correct audio device in Windows.  When using the external speakers/headphones or microphone, you cannot use the internal one.
 Expanding Your Computer   4-7 Using ExpressCardsUsing ExpressCardsUsing ExpressCardsUsing ExpressCards    Your computer has an ExpressCard slot. The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm (ExpressCard/34) wide ExpressCard. Typical ExpressCards support a very extensive range of applications including memory, wired and wireless communication cards, and security devices. Shown next are the appearances of ExpressCards for your reference.                                   ExpressCard/54              ExpressCard/34 To insert an ExpressCard: 1. Locate the ExpressCard slot on the left side of the computer. It can be the upper slot (standard configuration) or lower slot depending on your model. 2. Slide the ExpressCard, with its label facing up, all the way into the slot until the rear connectors click into place.  Eject button
 4-8   Expanding Your Computer  3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove an ExpressCard: 1. Double-click on the Safely Remove Hardware Safely Remove Hardware Safely Remove Hardware Safely Remove Hardware icon (   ) found on the Windows taskbar and the Safely Remove HardwareSafely Remove HardwareSafely Remove HardwareSafely Remove Hardware window appears on screen. 2. Select (highlight) the ExpressCard from the list to disable the card. 3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot.
 Expanding Your Computer   4-9 Using PC CardsUsing PC CardsUsing PC CardsUsing PC Cards    NOTE:  Some PC cards require additional system resources. Before using such PC card, you may have to free other system resources for the PC card.  Although some PC cards can be inserted and removed without turning off the computer, you cannot remove or install PC cards during Sleep mode.  Your computer (standard configuration) has one PC card slot that support CardBus specifications. The slots can accommodate a type II card. Typical type II cards are flash memory, SRAM, modem, LAN, and SCSI cards. To insert a PC card: 1. Locate the PC card slot (the lower slot) on the left side of the computer. 2. Slide the PC card, with its label facing up, into the slot until the eject button pops out.  3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove a PC card: 1. Double-click the Safely Remove Hardware Safely Remove Hardware Safely Remove Hardware Safely Remove Hardware   icon found on the Windows taskbar and the Safely Remove HardwareSafely Remove HardwareSafely Remove HardwareSafely Remove Hardware window appears on screen. 2. Select (highlight) the PC card from the list to disable the card. Eject button
 4-10   Expanding Your Computer  3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot.
 Expanding Your Computer   4-11 Using Smart Cards (Optional)Using Smart Cards (Optional)Using Smart Cards (Optional)Using Smart Cards (Optional)    Your computer may have a smart card reader. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card: 1. Locate the smart card slot. 2. Slide the smart card, with its label and embedded computer chip facing up into the slot.  3. When a new card is seated, use the third-party smart card software to allow your computer to read it. To remove a smart card: 1. Make sure that the third-party smart card software is not accessing the smart card. 2. Pull the card out of the slot.
 4-12   Expanding Your Computer  Using Storage CardsUsing Storage CardsUsing Storage CardsUsing Storage Cards    NOTE: You can use only storage cards. Your SD card reader does not support cards with I/O (input/output) functions such as a wireless network card or Bluetooth card.  Your computer has an SD card reader. The card reader is a small drive for reading from and writing to removable storage cards (or called memory cards). The card reader supports SD  (Secure Digital), SDHC (Secure Digital High Capacity), and SDXC (Secure Digital eXtended Capacity) cards. To insert a storage card: 1. Locate the SD card reader on the left side of the computer. 2. Align the card with its connector pointing to the slot and its label facing up. Slide the card into the slot until it reaches the end.  3. Windows will detect the card and assign it a drive name. To remove a storage card: 1. Double-click My ComputerMy ComputerMy ComputerMy Computer. 2. Right-click the drive with the card and select EjectEjectEjectEject. 3. Push the card to release and then pull the card out of the slot.
 Expanding Your Computer   4-13 System Memory UpgradeSystem Memory UpgradeSystem Memory UpgradeSystem Memory Upgrade    You can upgrade your computer by expanding system memory. CAUTION:  It is not recommended that you buy and install RAM modules by yourself. If you want to expand system memory, please ask Getac service center to install DRAM modules for you so that full compatibility can be guaranteed.  RAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the human body has adversely affected such modules. When inserting or removing a RAM module, do not touch the terminals or internal components, insert objects other than the module, or allow foreign particles to enter. Doing so has been known to cause damage, fire, or electrical shock.  To install the RAM module: 1. Remove the battery pack (see chapter 3) and make sure that the computer is not connected to AC power. 2. Carefully place the computer upside down. 3. Remove the four screws to open the compartment cover.
 4-14   Expanding Your Computer   4. To install the RAM module, match the module's notched part with the socket's projected part and firmly insert the module into the socket at a 20-degree angle. Then push down until the retaining clips lock the module into position.   CAUTION: If the RAM module is difficult to insert or difficult to push down, do not force it. Check once more to ensure that the module is positioned correctly.  5. Close the compartment cover and secure with four screws.
 Using BIOS Setup and System Recovery   5-1 Chapter 5Chapter 5Chapter 5Chapter 5     Using BIOS Setup and Using BIOS Setup and Using BIOS Setup and Using BIOS Setup and System RecoverySystem RecoverySystem RecoverySystem Recovery    BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. System Recovery reinstalls Windows to your computer and restores it to the factory default status. This chapter tells you how to use the BIOS Setup and System Recovery.
 5-2   Using BIOS Setup and System Recovery BIOS SetupBIOS SetupBIOS SetupBIOS Setup    When and How to UsWhen and How to UsWhen and How to UsWhen and How to Useeee    You need to run BIOS Setup Utility when:  You see an error message on the screen requesting you to run BIOS Setup Utility.  You want to restore the factory default BIOS settings.  You want to modify some specific settings according to the hardware.  You want to modify some specific settings to optimize the system performance. To run BIOS Setup Utility, press the F2F2F2F2 key when the prompt appears on the screen during the system startup. The prompt shows up on the screen for only a few seconds. You must press the F2F2F2F2 key quickly. The BIOS Setup Utility main screen appears as shown next.  Information  Main Advanced Security Boot Exit        Model  NO: Serial NO: Asset Tag: Processor Info: Installed System Memory:  SATA HDD:  BIOS Revision: EC Revision: LAN MAC Address:  IEEE 1394 GUID:  Operating Time:     V200-G2 RC6XXV0026  Intel(R) Core(TM) i5-3320M CPU @2.60GHz 4096 MB  TOSHIBA MQ01ABD032 – 320.0 GB  R1.50.070520G R0.50P.070520 00-22-20-0D-98-C0  00-40-D0-01-00-49-00-D6  184 Hours     F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit
 Using BIOS Setup and System Recovery   5-3 In general, you can use the arrow keys to move around and + / – keys to change the setup values. Keyboard information can be found at the bottom of the screen. NOTE:  The BIOS Setup Utility screens shown in this chapter are for your reference only. The actual items or settings on your computer may differ.  The BIOS Setup Utility program may have been updated after the publication of this manual.  The settings you select in your operating system might override similar settings in BIOS Setup Utility.  Information MenuInformation MenuInformation MenuInformation Menu    The Information menu contains the basic configuration information of the system. There are no user-definable items in this menu.  Information  Main Advanced Security Boot Exit        Model  NO: Serial NO: Asset Tag: Processor Info: Installed System Memory:  SATA HDD:  BIOS Revision: EC Revision: LAN MAC Address:  IEEE 1394 GUID:  Operating Time:     V100-G4 RC5XXV0043  Intel(R) Core(TM) i5-3320M CPU @2.60GHz 8192 MB  LITEONIT LAT-128M3S – 128 GB  R1.01.070520U R0.50M.070520 00-22-20-0D-A8-A7  00-40-D0-01-00-49-00-2D  80 Hours     F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  NOTE: The “Asset Tag” information appears when you have entered the asset number for this computer using the asset management program. The program is provided in the Asset tag folder of the Driver disc.
 5-4   Using BIOS Setup and System Recovery Main MenuMain MenuMain MenuMain Menu    The Main menu contains various system settings.  Information  Main Advanced Security Boot Exit        System Date: System Time:  Legacy USB Support:                [05/28/2012] [11:33:08]   [Enabled]    Item Specific Help   View or set system  date.    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  System TimeSystem TimeSystem TimeSystem Time  sets the system time. System DateSystem DateSystem DateSystem Date  sets the system date. Legacy USB SupportLegacy USB SupportLegacy USB SupportLegacy USB Support  enables or disables the system’s support for Legacy USB device in DOS mode.       05
 Using BIOS Setup and System Recovery   5-5 Advanced MenuAdvanced MenuAdvanced MenuAdvanced Menu    The Advanced menu contains the advanced settings as shown next.  Information Main  Advanced Security Boot Exit         Intel (R) Rapid Start Technology  Wake Up Capability System Policy AC Initiation: SATA Mode:  AMT Configuration  Virtualization Technology Setup   Graphic Setup  Device Configuration  Serial COM Port Configuration            [Performance] [Disabled] [AHCI]  Item Specific Help   iRST – Intel (R) Rapid Start Technology Configuration    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  Intel (R) Rapid Start Technology Intel (R) Rapid Start Technology Intel (R) Rapid Start Technology Intel (R) Rapid Start Technology  configures iRST. Press Enter Enter Enter Enter to access the submenu as shown below.    Advanced             Intel (R) Rapid Start Technology Item Specific Help   iRST Support:                 [Disabled ]    Enable iRST.    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit Disabled
 5-6   Using BIOS Setup and System Recovery iRST Support  enables of disables iRST, which gets your system up and running faster. Wake Up CapabilityWake Up CapabilityWake Up CapabilityWake Up Capability  specifies events for waking up the system. Press Enter Enter Enter Enter to access the submenu as shown below.    Advanced             Wake Up Capability Item Specific Help   Ring Wake Up From S3: USB Wake Up From S3: Wake on PCH LAN:               [Disabled] [Disabled] [Disabled]     Allow a modem  activity to wake up  the system from S3(Sleep) state.    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  Ring Wake Up From S3  allows a modem device activity to wake up the system from S3 (Sleep) state. USB Wake Up From S3  allows a USB device activity to wake up the system from S3 (Sleep) state. Wake on PCH LAN  allows a LAN activity to wake up the system from S3 (Sleep) state. System Policy System Policy System Policy System Policy sets if the system always runs at full speed (Performance) or lowers down when its temperature is too high (Balance). AC Initiation AC Initiation AC Initiation AC Initiation sets if connecting AC power will automatically start or resume your computer. SATA ModeSATA ModeSATA ModeSATA Mode  set to AHCI if your hard disk supports AHCI. AHCI allows you to take advantage of Advanced Host Controller Interface features. The options are IDE and AHCI. CAUTION: Incorrect SATA mode settings can result in hard disk drive boot failure. Disabled
 Using BIOS Setup and System Recovery   5-7  AMT ConfigurationAMT ConfigurationAMT ConfigurationAMT Configuration  configures Active Management Technology parameters. Press Enter Enter Enter Enter to access the submenu as shown below.    Advanced             AMT Configuration Item Specific Help    Intel AMT: Intel AMT Setup Prompt:               [Disable ] [Disabled]     Enable/Disable  Intel (R) Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution.  If enabled this  requires additional firmware in the SPI device    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  Intel AMT  enables or disables Intel® Active Management Technology BIOS extension execution. AMT allows the system administrator to access an AMT featured computer remotely. Intel AMT Setup PromptIntel AMT Setup PromptIntel AMT Setup PromptIntel AMT Setup Prompt  determines whether the prompt for entering Intel AMT Setup appears or not during POST. If disabled, users cannot enter Intel AMT Setup.        Virtualization Technology SetupVirtualization Technology SetupVirtualization Technology SetupVirtualization Technology Setup sets Virtualization Technology parameters. Press Enter Enter Enter Enter to access the submenu as shown below. Enabled
 5-8   Using BIOS Setup and System Recovery    Advanced             Virtualization Technology Setup Item Specific Help    Intel(R) Virtualization Technology  Intel(R) VT for Directed I/O (VT-d)                [Disabled] [Disabled]       When enabled, a VMM  can utilize the  additional hardware capabilities.    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  Intel(R) Virtualization TechnologyIntel(R) Virtualization TechnologyIntel(R) Virtualization TechnologyIntel(R) Virtualization Technology  enables or disables Intel® VT (Intel Virtualization Technology) feature which provides hardware support for processor virtualization. When enabled, a VMM (Virtual Machine Monitor) can utilize the additional hardware virtualization capabilities provided by this technology. Intel(R) VT for Directed I/O (VTIntel(R) VT for Directed I/O (VTIntel(R) VT for Directed I/O (VTIntel(R) VT for Directed I/O (VT----d)d)d)d)  enables or disables VT-d (Intel® Virtualization Technology for Directed I/O). When enabled, VT-d helps enhance Intel platforms for efficient virtualization of I/O devices.       Graphics SetupGraphics SetupGraphics SetupGraphics Setup  sets graphics related options. Press Enter Enter Enter Enter to access the submenu as shown below. Disabled
 Using BIOS Setup and System Recovery   5-9    Advanced             Graphic Setup Item Specific Help    DVMT  Pre-Allocated: Total Graphics Memory:                [    ] [256MB]       Select Pre-Allocated Graphics Memory size used by the Internal Graphics Device. This has no effect if external graphics are present.    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  NOTE: Graphic Setup parameters apply to the internal graphics device only.  DVMT  PreDVMT  PreDVMT  PreDVMT  Pre----Allocated Allocated Allocated Allocated  sets the amount of pre-allocated (fixed) graphics memory for use by the internal graphics device.  Total Graphics Memory Total Graphics Memory Total Graphics Memory Total Graphics Memory  sets the amount of total graphics memory (pre-allocated + fixed + DVMT) for use by the internal graphics device.         64MB
 5-10   Using BIOS Setup and System Recovery Device Configuration enables or disables several hardware components. Press Enter to access the submenu as shown below.    Advanced             Device Configuration Item Specific Help    Wireless LAN: WWAN:  Bluetooth:  Media Card Reader:  Smart Card Reader:  HD Audio:  Modem: Fingerprint Scanner:  1394 Port:  Touch Screen:  GPS:       [       ] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled]    Set WLAN device to enable/disable.    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  You can enable or disable the following items:  Wireless LAN  WWAN  Bluetooth  Media Card Reader (SD)  Smart Card Reader  HD Audio (High Definition Audio)  Modem  Fingerprint Scanner  1394 Port  Touch Screen  GPS Enabled
 Using BIOS Setup and System Recovery   5-11 Serial COM Port Configuration  enables or disables the serial port. Press Enter to access the submenu as shown below.    Advanced             COM PORT Configuration Item Specific Help    Serial COM PORT1 Serial COM PORT2 Serial COM PORT3                [       ] [Enabled] [Enabled]    This option controls  the Onboard COM1 Address. When  enabled, COM1 uses address 0x3F8h and  IRQ4.    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit             Enabled
 5-12   Using BIOS Setup and System Recovery Security MenuSecurity MenuSecurity MenuSecurity Menu    The Security menu contains the security settings, which safeguard your system against unauthorized use.  Information Main Advanced Security Boot Exit        Supervisor Password Is: User Password Is: Set Supervisor Password: Set User Password Password on Boot:  Set HDD 0 Password: HDD 0 Password:   TPM Setup Menu  Intel Trusted Execution Technology        Cleared Cleared [Enter] [Enter] [Disabled]  [Enter] Cleared    [Disabled] Item Specific Help   Set or clear the Supervisor account’s password.    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  NOTE:  You can set the user password only when the supervisor password has been set.  If both the administrator and user passwords are set, you can enter any of them for starting up the system and/or entering BIOS Setup. However, the user password only allows you to view/change the settings of certain items.  A password setting is applied right after it is confirmed. To cancel a password, leave the password empty by pressing the Enter key.  Supervisor/User Password Is  Supervisor/User Password Is  Supervisor/User Password Is  Supervisor/User Password Is  shows whether you have set the supervisor/user password or not for the system. Set Supervisor/User PasswordSet Supervisor/User PasswordSet Supervisor/User PasswordSet Supervisor/User Password  sets the supervisor/user password. When typing the password, first make sure that Num Lock is off, and then type the password in the entry fields and press EnterEnterEnterEnter. Confirm your password by typing it again and pressing Enter
 Using BIOS Setup and System Recovery   5-13 EnterEnterEnterEnter. You can set the supervisor/user password to be required for starting up the system and/or entering BIOS Setup. Password on BootPassword on BootPassword on BootPassword on Boot  allows you to enable or disable the entering of password for booting up your system. Once the password is successfully set and this item is enabled, it is required for booting up the system. Set HDD Set HDD Set HDD Set HDD 0 Password0 Password0 Password0 Password  sets the password for locking the Primary Master hard disk drive.  After setting a password, the hard disk drive can only be unlocked by the password no matter where it is installed. HDD 0 Password Is  HDD 0 Password Is  HDD 0 Password Is  HDD 0 Password Is  shows whether you have set the hard disk password or not. TPM Setup MenuTPM Setup MenuTPM Setup MenuTPM Setup Menu  sets various TPM parameters. Press Enter Enter Enter Enter to access the submenu as shown below.   TTTTPM Support PM Support PM Support PM Support  enables or disables TPM (Trusted Platform Module) support. TPM (Trusted Platform Module) is a component on your computer’s mainboard that is specifically designed to enhance platform security by providing a protected space for key operations and other security critical tasks.       Security           TPM Setup Menu  Item Specific Help    TPM Support:  Current TPM State: Change TPM Status:              [       ]  [Enabled and Activated] [No Change]   This is used to decide whether TPM support should be enabled or disabled.    F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit Enabled
 5-14   Using BIOS Setup and System Recovery Current TPM StateCurrent TPM StateCurrent TPM StateCurrent TPM State  shows the current TPM state. Change TPM State Change TPM State Change TPM State Change TPM State  allows you to select between No Change, Clear, Deactivate & Disable, and Enable & Activate. Intel Trusted Execution Technology  enables utilization of additional hardware capabilities provided by Intel® Trusted Execution Technology. Boot MenuBoot MenuBoot MenuBoot Menu    The Boot menu sets the sequence of the devices to be searched for the operating system.  Information Main Advanced Security Boot Exit        Boot priority order: 1. SATA ODD: 2. SATA HDD1: TOSHIBA MQ01ABD032 3. USB HDD: 4. USB FDD: 5. PCI LAN: IBA GE Slot 00C8 v1365 6. USB ODD: 7. Other HDD: 8. ESATA HDD:                Item Specific Help   Keys used to view or configure devices:  and  arrows Select a device. ’+’ and ’-’ moves the device up or down. ’Shift + 1’ enables or disables a device. ’Del’ deletes  an unprotected device.       F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS uses to look for a device from which to load the OS. Below is a brief description of keyboard usage:
 Using BIOS Setup and System Recovery   5-15 KeyKeyKeyKey     FunctionFunctionFunctionFunction    ↑ , ↓  Selects (highlight) a boot device. +, –  Changes the boot sequence. 1111 to 4444  Loads the default boot sequence. KeyKeyKeyKey     FunctionFunctionFunctionFunction    ffff or rrrr    Specifies if the boot device is fixed (ffff) or removable (rrrr). XXXX Moves the highlighted boot device from the “Boot priority order” list to the “Excluded from boot order” list, and vice versa. ShiftShiftShiftShift+1111 Deactivates/activates the highlighted boot device on the “Boot priority order” list. When a device has been deactivated, an “!” (exclamation) symbol appears beside the item and system will bypass it when detecting boot device during POST.  Exit MenuExit MenuExit MenuExit Menu    The Exit menu provides ways of exiting BIOS Setup. After finishing with your settings, you must save and exit so that the changes can take effect.  Information Main Advanced Security Boot Exit        Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes             Item Specific Help   Equal to F10, save all changes of all menus, then exit setup configure driver. Finally resets the system automatically.      F1  Help  ↑↓↑↓↑↓↑↓ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ←→←→←→←→ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit
 5-16   Using BIOS Setup and System Recovery  Exit Saving Changes  Exit Saving Changes  Exit Saving Changes  Exit Saving Changes  saves the changes you have made and exits BIOS Setup Utility. Exit Discarding Changes  Exit Discarding Changes  Exit Discarding Changes  Exit Discarding Changes  exits BIOS Setup Utility without saving the changes you have made. Load Setup DefaultsLoad Setup DefaultsLoad Setup DefaultsLoad Setup Defaults  loads the factory default values for all the items. Discard Changes  Discard Changes  Discard Changes  Discard Changes  restores the previous values for all the items. Saves Changes  Saves Changes  Saves Changes  Saves Changes  saves the changes you have made.
 Using BIOS Setup and System Recovery   5-17 System RecoverySystem RecoverySystem RecoverySystem Recovery    Use System Recovery when:  Your Windows operating system does not start at all.  You want to restore the system to the factory state. WARNING:  Using this feature will reinstall Windows to your system and configure it to the system’s factory default settings. All data on the hard disk drive will be lost.  Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems.  To run System Recovery: 1. Connect the AC adapter. 2. During system startup when the following screen appears, press Ctrl Ctrl Ctrl Ctrl + Alt Alt Alt Alt + F2F2F2F2 keys for four seconds.  3. In the screen that appears, select RecoveryRecoveryRecoveryRecovery to start the recovery process.
 5-18   Using BIOS Setup and System Recovery  4. The progress bar shows the percentage completed. When it reaches 100%, the system turns off. 5. Turn on the computer. The Windows setup wizard starts. Follow the onscreen prompts to continue. 6. When the system restarts, the installer screen appears. The installer will perform system hardware detection and driver installation.
 Using BIOS Setup and System Recovery   5-19 7. When completed, the system restarts and displays Windows desktop.
 Using Getac Software   6-1 Chapter 6Chapter 6Chapter 6Chapter 6     Using Getac SoftwareUsing Getac SoftwareUsing Getac SoftwareUsing Getac Software    Getac software includes application programs for specific computer components and utility programs for overall management. This chapter describes how to use the software.
 6-2   Using Getac Software Using the OSD Control PanelUsing the OSD Control PanelUsing the OSD Control PanelUsing the OSD Control Panel    The OSD (On Screen Display) Control Panel provides a user-friendly interface for you to quickly activate or operate certain functions on your computer with a simple tap of the screen. To open the OSD Control Panel, press the button      on the front of your computer. The following screen appears.  The following table shows the various functions on the OSD Control Panel. IconIconIconIcon     FunctionFunctionFunctionFunction     Opens the Help file explaining the OSD Control Panel.  Opens the Quick Button Setup menu (refer to the next section for details).  Closes the OSD Control Panel.
 Using Getac Software   6-3 IconIconIconIcon     FunctionFunctionFunctionFunction     Serves as the master ON/OFF control of the RF radio. The word on the button indicates the current status. The on/off status will persist through Sleep/Hibernation mode but it will always be on upon restarting.  Enables or disables the G-Rotate function. When enabled, the LCD display will rotate itself to match the direction the computer is held. This button is available for use only when the computer is in Tablet mode. The function is automatically enabled whenever you change the LCD display position to the Tablet style.  Rotates the orientation from default landscape to 90o portrait, 180o landscape, or 270o portrait. The status will persist through Sleep/Hibernation mode or system power off.  Switches the ECO mode to the next choice (MAX, QUICK, WORK, or OFF). The word on the button indicates the current status. (For information on ECO modes, see “ECO Tab” later in this chapter.) This button works only when using battery power. The ECO mode will return to the default OFF setting whenever AC power is connected, backlight status is changed, the system resumes from Sleep/Hibernation mode, or the system is restarted.  Switches the LCD backlight to the next choice (MAXMAXMAXMAX, AUTOAUTOAUTOAUTO, or    MANUALMANUALMANUALMANUAL.) The word on the button indicates the current status.
 6-4   Using Getac Software IconIconIconIcon     FunctionFunctionFunctionFunction     When set to MAXMAXMAXMAX, the backlight is adjusted to the highest brightness level. When set to AUTOAUTOAUTOAUTO, the brightness will be automatically adjusted according to the current ambient light. The backlight will return to the default MANUALMANUALMANUALMANUAL setting whenever the system resumes from Sleep/Hibernation mode or the system is restarted.  Switches the display output to the next choice:  VGA (external monitor), BOTH (LCD and external monitor), or LCD. This button works only when an external display is connected.  Starts Microsoft Internet Explorer by default. You can assign a different function to this button (refer to the next section for details).  Starts Windows Mobility Center by default. You can assign a different function to this button (refer to the next section for details).  Starts the touchscreen calibration tool by default. You can assign a different function to this button (refer to the next section for details).  Starts the Bluetooth Setup utility by default. You can assign a different function to this button (refer to the next section for details).  Opens the Input Panel by default. You can assign a different function to this button (refer to the next section for details).
 Using Getac Software   6-5 IconIconIconIcon     FunctionFunctionFunctionFunction     Allows you to adjust the sound volume by dragging the knob along the bar.  Switches the system sound output OFF (mute) and ON.   Allows you to adjust the LCD brightness level by dragging the knob along the bar.  System enters “black-out” mode by turning off the LCD display, LED indicators, touchscreen, and sound. Press the power button (   ) to wake up the system from “black-out” mode.
 6-6   Using Getac Software Quick Button SetupQuick Button SetupQuick Button SetupQuick Button Setup        By default, the five quick buttons on the OSD Control Panel have pre-assigned functions. You can re-define the buttons: 1. Click the Quick Button Setup button (   ) on the OSD control panel and the Quick Button SeQuick Button SeQuick Button SeQuick Button Setuptuptuptup window appears. 2. At the bottom of the screen are the five quick buttons. Click the button you want to change.  3. Depending on the type of task to be associated with the button, click the Open button   of the Executed Program or Open Folder type. 4. A dialog box appears. Select the desired program or folder and click OpenOpenOpenOpen or Select. After your selection, the entry field will display the program or folder information.
 Using Getac Software   6-7  or    5. You can change the image appearing on the button by clicking the Select ImageSelect ImageSelect ImageSelect Image button. After selecting the image file, the original image on the button will be replaced. 6. Click SetSetSetSet to complete the changes. NOTE: You can restore the quick buttons to the default settings by clicking Reset All.
 6-8   Using Getac Software Using Button ManagerUsing Button ManagerUsing Button ManagerUsing Button Manager    The five quick buttons located on the front of your computer come with predefined functions. You can use Button Manager to re-define the buttons.  1. Click StartStartStartStart  ProgramsProgramsProgramsPrograms  Button ManagerButton ManagerButton ManagerButton Manager  Button ManagerButton ManagerButton ManagerButton Manager. The following screen appears.  2. Select the button to re-define. 3. Under the UpdaUpdaUpdaUpdate Button Functionte Button Functionte Button Functionte Button Function click the Key NameKey NameKey NameKey Name dropdown list to see the available options and select the option you want.
 Using Getac Software   6-9  The option User Define Button (1 to 5) means the Quick Button in the OSC Control Panel. 4. Repeat the steps for the other buttons that you want to re-define. 5. For the changes to take effect immediately, click Start Flash. 6. If you intend to save the configurations for later retrieval, click SAVE. Select a location, enter a filename, and click Save to save the current configurations as a .bfh file. Click Load the next time you use Button Manager to load any previously saved configurations. NOTE: You can restore to the default settings by clicking Get Default.
 6-10   Using Getac Software Using GUsing GUsing GUsing G----ManagerManagerManagerManager    G-Manager is a unified user interface utility that allows you to manage and configure the following:  System  Battery  ECO (economic mode)  Light Sensor  Ignition  Monitoring  GPS Status Starting GStarting GStarting GStarting G----ManagerManagerManagerManager    You can start up G-Manager by any of the following methods:  Click Start  All Programs  Getac Utility  G-Manager, or  Click and hold the   icon located on the taskbar until a ring appears. From the small menu that pops up, click GGGG----ManagerManagerManagerManager. The G-Manager window appears, containing 7 tabs as described later.  NOTE: Depending on your model, the actual items appearing on the screen may differ from those shown in this manual.
 Using Getac Software   6-11 System TabSystem TabSystem TabSystem Tab    The SystemSystemSystemSystem tab provides system information.  To view specific information, select the component from the list on the left side of the screen. The information of the selected component will be displayed on the right side of the screen.
 6-12   Using Getac Software Battery TabBattery TabBattery TabBattery Tab    The BatteryBatteryBatteryBattery tab allows you to check the battery status and configure the battery.  At most two batteries may be supported. Click Battery 1Battery 1Battery 1Battery 1 or Battery 2Battery 2Battery 2Battery 2 to view the information of each battery (if your model has a second battery). NOTE:  When the percentage % Left% Left% Left% Left is less than 10% then the value will be displayed in red.  When an abnormal battery condition is detected BatteryBatteryBatteryBattery StatusStatusStatusStatus value will be displayed in red.  Battery InformationBattery InformationBattery InformationBattery Information    The upper portion of the screen displays the current status of the selected battery.
 Using Getac Software   6-13 Charging ModeCharging ModeCharging ModeCharging Mode    The lower left portion of the screen allows you to select the charging mode.  Normal ModeNormal ModeNormal ModeNormal Mode – The battery will be fully charged. When remaining charge reaches below 95%, then charging will start until it is fully charged.  Economy ModeEconomy ModeEconomy ModeEconomy Mode – This mode helps prolong battery life by charging up to 80% of its total capacity only. It is highly recommended if you are using AC power most of the time. Gauge ResetGauge ResetGauge ResetGauge Reset    The lower right portion of the screen contains the battery health bar and provides the battery calibration function. The health bar shows the batter’s health by percentage. A low percentage indicates poor health and therefore the need to perform a gauge reset to calibrate the battery’s capacity and improve the battery’s performance. The gauge reset process includes discharging and then fully recharging the battery in two cycles. It can take several hours. To perform a gauge reset: 1. Connect the AC adapter. 2. Click StartStartStartStart, located next to the health bar 3. In the pop-up dialog box, click YesYesYesYes to start the process. The window as below appears displaying the progress bar.
 6-14   Using Getac Software  4. Wait till the process is completed. Click ExitExitExitExit when finished.  ECO TabECO TabECO TabECO Tab    The ECOECOECOECO tab allows you to configure ECO modes (or called power profiles).
 Using Getac Software   6-15  To put the system into an ECO mode, use the ECO button (one of the buttons in the OSD Control Panel). (See “Using the OSD Control Panel” earlier in this chapter for information.) ECO InformationECO InformationECO InformationECO Information    The left portion of the screen lists the available power profiles (Quick, Power Saving, and Work). Each profile is a combination of power settings that results in different power consumptions. To change the settings of a profile, select (highlight) the profile name in the list. Profile SettingsProfile SettingsProfile SettingsProfile Settings    The right portion of the screen displays the settings of the current selected profile. You can set up the following items:  WWAN, Bluetooth, Touchscreen, and WLAN  –  can be on or off.
 6-16   Using Getac Software  Power Scheme – can be Balanced, High Performance or Power Saver. The settings here correspond to the settings in Windows. (See Windows Help for the description to each of the power scheme.) After changing the settings, click Apply or OK to save the changes. To restore the settings to the default values, click Default.           Light Sensor TabLight Sensor TabLight Sensor TabLight Sensor Tab    The Light SensorLight SensorLight SensorLight Sensor tab allows you configure how the light sensor works.
 Using Getac Software   6-17  Sensor ModeSensor ModeSensor ModeSensor Mode    The left portion of the screen lists the sensor modes:  NormalNormalNormalNormal – Light sensor sensitivity is set at normal environment lighting condition.  BrightBrightBrightBright – Light sensor sensitivity is set at bright environment lighting condition (e.g. outdoors).  DarkDarkDarkDark – Light sensor sensitivity is set at dark environment lighting condition (e.g. indoors, storage warehouse, etc.). Click to select a mode. Click ApplyApplyApplyApply or OKOKOKOK to save the changes. Environment IlluminanceEnvironment IlluminanceEnvironment IlluminanceEnvironment Illuminance    To have the keypad backlight automatically turn on in poor lighting environment, click the checkbox Automatic Keyboard BacklitAutomatic Keyboard BacklitAutomatic Keyboard BacklitAutomatic Keyboard Backlit. Click    ApplyApplyApplyApply or OKOKOKOK to save the changes.
 6-18   Using Getac Software Ignition TabIgnition TabIgnition TabIgnition Tab    The IgnitionIgnitionIgnitionIgnition tab allows you to configure how your system works with the vehicle ignition.  Ignition ControlIgnition ControlIgnition ControlIgnition Control    When your system is connected to the Vehicle Dock (available as an option), you can have your system derive power from the vehicle and have the on/off of the vehicle ignition turn on/off your system. To enable the feature, select the checkbox Ignition Power OnIgnition Power OnIgnition Power OnIgnition Power On. Click    ApplyApplyApplyApply or OKOKOKOK to save the changes. Delay TimeDelay TimeDelay TimeDelay Time    When the Ignition Power On Ignition Power On Ignition Power On Ignition Power On feature is enabled, the system will automatically shut down after the vehicle ignition is turned off or the battery is low. You can set the amount of time (20 seconds, 30 seconds, 45 seconds, 1 minute, or 2 minute) the system waits before shutting down. Click ApplyApplyApplyApply or OKOKOKOK to save the changes.
 Using Getac Software   6-19 Monitoring TabMonitoring TabMonitoring TabMonitoring Tab    The MonitoringMonitoringMonitoringMonitoring tab allows you to configure the monitoring function of G-Manager.  Items to MonitorItems to MonitorItems to MonitorItems to Monitor    The left portion of the screen lists the items. Click the checkbox before an item to include it as a monitored component. Click ApplyApplyApplyApply or OKOKOKOK to save the changes. NOTE: Different models have different supported monitoring items; non-supported items cannot be selected (grayed out items).  Monitoring OptionsMonitoring OptionsMonitoring OptionsMonitoring Options    The right portion of the screen allows you to set how the monitored items are displayed and how often the monitoring is updated.  Always On Top – allows the monitoring window to remain on top of your display.
 6-20   Using Getac Software  Monitoring Interval – sets the frequency of updates on the monitoring window (1/3/5/10/30 seconds or 1/5/30 minutes). Click ApplyApplyApplyApply or OKOKOKOK to save the changes. Starting and Stopping theStarting and Stopping theStarting and Stopping theStarting and Stopping the    MonitoringMonitoringMonitoringMonitoring    To start monitoring, click START MonitorSTART MonitorSTART MonitorSTART Monitor. The monitoring window similar to the one below appears displaying requested information at specified intervals.  To stop monitoring, click the Close button at the upper right corner of the monitoring window or click Stop MonitorStop MonitorStop MonitorStop Monitor on the Monitoring Monitoring Monitoring Monitoring tab page of G-Manager.  GPS Status TabGPS Status TabGPS Status TabGPS Status Tab    The GPS StatusGPS StatusGPS StatusGPS Status tab shows the GPS status for models having the GPS module.
 Using Getac Software   6-21  To start GPS positioning, click Start GPSStart GPSStart GPSStart GPS. The screen displays:  Ongoing raw data strings in the Message LogMessage LogMessage LogMessage Log section  Overhead satellite positions in the Satellite MapSatellite MapSatellite MapSatellite Map section  Signal strength of the satellites in the Signal IndicatorSignal IndicatorSignal IndicatorSignal Indicator section  When GPS positioning is completed, the DDDData Summary ata Summary ata Summary ata Summary section shows the GPS information of the current location. To stop GPS positioning, click Stop GPSStop GPSStop GPSStop GPS.
 6-22   Using Getac Software Using Getac CameraUsing Getac CameraUsing Getac CameraUsing Getac Camera    Getac Camera is a geo-tagging camera program, which allows you to stamp geographical information on photos as watermarks and embed such information into JPEG files as EXIF 2.2 metadata. NOTE:  Getac Camera works with Virtual-GPS (a separate application program). Make sure that Virtual-GPS is installed in your computer.  Before starting Getac Camera, close any other program that uses the camera; otherwise, Getac Camera can only provide limited functions.  The instructions in this document are based on touchscreen operations though there are equivalent touchpad and mouse operations.  To start the program, tap the Getac Camera program icon on Windows desktop. The Getac Camera window appears as shown below. The GPS positioning will be automatically activated. When the GPS positioning is completed, you will see the geographical information in the watermark area on the image.            
 Using Getac Software   6-23  No.No.No.No.    Screen ElementsScreen ElementsScreen ElementsScreen Elements    DescriptionsDescriptionsDescriptionsDescriptions     Preview/Display Window Displays the live image in Camera mode and the selected image in View mode.  Status Display  Indicates the use of a feature.   GPS Lock in use  /  Front/Bottom camera in use (depending on your model)  Night mode in use  /   Continuous/Timer mode in use  GPS Status  Indicates if the GPS positioning is completed (   ) or not (   ).  Window Control Buttons  Minimizes the program window.  Closes the program.  Control Buttons  Perform immediate tasks on the current image.   Watermark  Displays the GPS information such as direction, longitude, latitude, GPS status, date, and time.  Thumbnail Tray Displays up to 7 pictures in a thumbnail view. The middle is the picture last taken or selected. You can drag toward the right or left to scroll through the thumbnail view. The  /  button hides/shows the Thumbnail Tray.  Command Buttons  Switches to Camera Mode.  Switches to Camcorder mode.
 6-24   Using Getac Software  Switches to View Mode.  Switches to GPS view.  Switches to the Settings screen. No.No.No.No.    Screen ElementsScreen ElementsScreen ElementsScreen Elements    DescriptionsDescriptionsDescriptionsDescriptions         Provides copyright, licensing, and help information.  Taking PicturesTaking PicturesTaking PicturesTaking Pictures    1. Start the Getac Camera program. You will be in Camera Mode. 2. You can use the buttons on the right and left side of the preview window for immediate controls. (See “Camera Controls Buttons” for detailed information.) For overall settings, tap  . (See “Camera Settings” for detailed information.) 3. Aim the camera lens at your subject.
 Using Getac Software   6-25 4. When ready,  you can shoot the picture in either of the two methods:   Method 1:  Tap the   button.   Method 2:  Drag the preview image and drop it into Thumbnail Tray.   5. The picture will appear in the middle of the Thumbnail View and be saved to the predefined storage location. Camera Controls ButtonsCamera Controls ButtonsCamera Controls ButtonsCamera Controls Buttons    Control ButtonsControl ButtonsControl ButtonsControl Buttons     DescriptiDescriptiDescriptiDescriptionsonsonsons        Flips the image vertically.  Flips the image horizontally.  /   Turns on/off GPS lock. The icon in the button shows the current status. GPS lock allows you record the exact location of the object you are shooting instead of where you are using the computer to shoot the picture. First, put the computer near your object and tap this button to lock the GPS information; then, you can go farther away to where you can have a good view of the object for the shooting. Remember to turn off GPS lock when the feature is not needed for the next picture. The GPS lock is always off whenever you start the program.
 6-26   Using Getac Software  /   Turns off/on watermark. The icon in the button shows the current status. You can turn off watermark if you do not want the watermark to show in the picture. Your setting remains effective until you change it again.  Shooting VideosShooting VideosShooting VideosShooting Videos    1. Start the Getac Camera program. You will be in Camera mode. Tap  to switch to Camcorder mode. 2. You can use the buttons on the right and left side of the preview window for immediate controls. (See “Camcorder Control Buttons” for detailed information.) For overall settings, tap  . (See “Camera Settings” for detailed information.) 3. Aim the camera lens at your subject. To start shooting the video, tap the   button.
 Using Getac Software   6-27 4. To stop, tap the same button again. 5. An image from the video will appear in the middle of the Thumbnail Tray. The file is saved to the predefined storage location. Camcorder Control ButtonsCamcorder Control ButtonsCamcorder Control ButtonsCamcorder Control Buttons    Control ButtonsControl ButtonsControl ButtonsControl Buttons     DescDescDescDescriptionsriptionsriptionsriptions     Increases the recording sound volume.  /    Disables/enables the microphone.  Decreases the recording sound volume.  Flips the image vertically.  /   Turns on/off the display of elapsed recording time and current volume.   Using View Using View Using View Using View ModeModeModeMode    Tap   at the bottom of the screen to switch to View mode. While in Camera or Camcorder mode, you can also switch to View mode by either of the two methods:  Method 1:  Double-tap the thumbnail in the Thumbnail Tray.  Method 2:  Drag the thumbnail and drop into the preview window.
 6-28   Using Getac Software Selecting an Image or VideoSelecting an Image or VideoSelecting an Image or VideoSelecting an Image or Video    To scroll through the Thumbnail Tray, drag the tray toward the left or right.    To select an image or video, use either of the two methods:   Method 1:  Double-tap the thumbnail in the Thumbnail Tray.  Method 2:  Drag the thumbnail and drop into the display window.       Image Viewing ControlsImage Viewing ControlsImage Viewing ControlsImage Viewing Controls
 Using Getac Software   6-29 When you select an image to view, you can perform the following tasks. ToToToTo     Via Control ButtonsVia Control ButtonsVia Control ButtonsVia Control Buttons     Via MultiVia MultiVia MultiVia Multi----touch Operationstouch Operationstouch Operationstouch Operations    Zoom in/out (up to four scales)  /    Drag two fingers apart/ towards to zoom in/out. ToToToTo     Via Control ButtonsVia Control ButtonsVia Control ButtonsVia Control Buttons     Via MultiVia MultiVia MultiVia Multi----touch Operationstouch Operationstouch Operationstouch Operations     When zoomed in, you can drag to view another portion of the image. Restore to the 100% scale   − Rotate to the right/left by 90°  /    Drag two fingers in a clockwise/counterclockwise circular motion. View image properties  −  Adding Notes to an ImageAdding Notes to an ImageAdding Notes to an ImageAdding Notes to an Image    1. Switch to View mode, select the image, and tap  . 2. In properties view, tap  .
 6-30   Using Getac Software 3. Type your notes in the entry field. 4. When completed, tap  .  The first three lines of the notes show on the screen.   Video Playback ControlsVideo Playback ControlsVideo Playback ControlsVideo Playback Controls     When you select a video to playback, you can perform the following tasks. ToToToTo     Via Control ButtonsVia Control ButtonsVia Control ButtonsVia Control Buttons    Start/pause the playback   /   Skip backwards/forwards   /   Increase/decrease volume   /
 Using Getac Software   6-31 Turn on/off the status display   /       Camera SettingsCamera SettingsCamera SettingsCamera Settings    To change camera settings, tap   at the bottom of the screen.  Along the left of the window are all the setting items. You can drag this area up or down to scroll through the items. The middle of the window displays the current item and setting value. To the right is the adjustment bar where you can tap or drag to change the setting value. All changes (except for Camera Mode) remain effective until you change them again.
 6-32   Using Getac Software ItemsItemsItemsItems     NameNameNameName     DescriDescriDescriDescriptionsptionsptionsptions     White Balance Five choices from which you can select one that matches the current light source: Automatic (default), Sunshine, Cloudy, Fluorescence, and Incandescence.  Brightness Adjusts the brightness level. The range of levels depends on computer models. You can tap   to restore to the default level. ItemsItemsItemsItems     NameNameNameName     DescriptionsDescriptionsDescriptionsDescriptions     Contrast Adjusts the contrast level. The range of levels depends on computer models. You can tap   to restore to the default level.  Hue  Adjusts the hue level. The range of levels depends on computer models. You can tap   to restore to the default level.  Flicker Sets the frequency to match the local electrical system for flicker free shooting under electric light. Choices are: 60Hz (default) and 50Hz.  LED Light  Turns On (default) or Off the LED light. This item is available for setting only on models with the LED light.  Night Mode  Turns On or Off (default) night mode. You can turn on the feature for shooting in low light situations.  Image Size  Sets the image resolution.  1600 x 1200, 1024 x 768, 800 x 600, or 640 x 480 for 2.0MP Camera.  Video Size  Sets the video size to 640x480 or 320x240.
 Using Getac Software   6-33  Camera Mode Three choices for the shooting mode: Normal This is the default setting whenever the program is started. Continuous  Continuous shooting of 3 pictures (one shot per second). Timer  5-second countdown before shooting.  Status Display Turns On (default) or Off the display of the status indicators. ItemsItemsItemsItems     NameNameNameName     DescriptionsDescriptionsDescriptionsDescriptions     Watermark  Turns On (default) or Off the display of watermark in the image. (Turning off does not affect the embedded EXIF 2.2 metadata.)  Shutter Sound Turns On (default) or Off the sound played upon photo shooting.  Power Saving Sets if power saving works for the program. System (default) The Camera program enters power saving mode according to the settings of Windows’ Power Options. Never The Camera program will not enter power saving mode while the program window is open. But when the program window is minimized, the System setting overrides.  Camera Switch Switches to the Front (default) or Bottom camera lens. The latter is available for selection only on computer models with two cameras.  Folder Path Sets the storage location of the images. To change to a different folder, tap Browse and select the folder.
 6-34   Using Getac Software The default location is Users\[user name]\Pictures folder that contains the original images. A subfolder named Thumbs contains a copy of the same images (with filename prefix Thumb_) for the thumbnail view. NOTE: If you are adding or deleting images using File Explorer, make sure to work on both the correct folder and its Thumbs subfolder.  ItemsItemsItemsItems     NameNameNameName     DescriptionsDescriptionsDescriptionsDescriptions     Time Option Displays the time throughout the program according to one of the two choices: System time zone  (default) The time zone setting of the computer is taken into consideration. If the current location is in daylight saving time, the time will be adjusted accordingly. UTC The time is based on Coordinated Universal Time.  Filename Prefix The default filename prefix is IMG. The complete filename is IMG_xxxxxx.jpg (where xxxxxx = sequential number). When the sequential number has reached 999999 and you are taking the next picture, a message will pop up to ask you to change the prefix. You can change the prefix by typing the characters (limited to A~Z, a~z, 0~9, - and _) in the entry field. Maximum number of characters allowed is 10.
 Caring for the Computer   7-1 Chapter 7Chapter 7Chapter 7Chapter 7     Caring for the ComputerCaring for the ComputerCaring for the ComputerCaring for the Computer    Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling.
 7-2   Caring for the Computer Protecting the ComputerProtecting the ComputerProtecting the ComputerProtecting the Computer    To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using an AntiUsing an AntiUsing an AntiUsing an Anti----VirusVirusVirusVirus    StrategyStrategyStrategyStrategy    You can install a virus-detecting program to monitor potential viruses that could damage your files. Using Action Center (for Windows 7)Using Action Center (for Windows 7)Using Action Center (for Windows 7)Using Action Center (for Windows 7)    Action Center alerts you to take action on the following security essentials:  Windows Firewall  Windows Update  Malware Protection (anti-virus, anti-spyware)  Others (Internet security, user account control) For detailed information, see Windows’ Help.
 Caring for the Computer   7-3 Using the Cable LockUsing the Cable LockUsing the Cable LockUsing the Cable Lock    You can use a Kensington-type cable lock to protect your computer against theft. The cable lock is available in most computer stores. To use the lock, loop the lock cable around a stationary object such as a table. Insert the lock to the Kensington lock hole and turn the key to secure the lock. Store the key in a safe place.
 7-4   Caring for the Computer Taking Care of the ComputerTaking Care of the ComputerTaking Care of the ComputerTaking Care of the Computer    LocaLocaLocaLocationtiontiontion    GuidelinesGuidelinesGuidelinesGuidelines     For optimal performance, use the computer where the recommended temperature is between 0°C (32°F) and 55°C (131°F) – actual operating temperature depending on product specifications.  Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Using the computer in extreme environments for long periods can result in product deterioration and a shortened product life.  Operating in an environment with metallic dust is not allowed.  Place the computer on a flat and steady surface. Do not stand the computer on its side or store it in an upside-down position. A strong impact by dropping or hitting may damage the computer.  Do not cover or block any ventilation openings on the computer. For example, do not place the computer on a bed, sofa, rug, or other similar surface. Otherwise, overheating may occur that results in damage to the computer.  As the computer can become very hot during operation, keep it away from objects that are vulnerable to heat.  Keep the computer at least 13 cm (5 inches) away from electrical appliances that can generate a strong magnetic field such as a TV, refrigerator, motor, or a large audio speaker.  Avoid moving the computer abruptly from a cold to a warm place. A temperature difference of more than 10°C (18°F) may cause condensation inside the unit, which may damage the storage media.
 Caring for the Computer   7-5 General GuidelinesGeneral GuidelinesGeneral GuidelinesGeneral Guidelines     Do not place heavy objects on top of the computer when it is closed as this may damage the display.  The screen surface is easily scratched. Avoid touching it with a sharp object such as a pen or pencil.  To maximize the life of the backlight in the display, allow the backlight to automatically turn off as a result of power management. Avoid using a screen saver or other software that prevents the power management from working. CleaningCleaningCleaningCleaning    GuidelinesGuidelinesGuidelinesGuidelines     Never clean the computer with its power on.  Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer.  Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.  Dust or grease on the touchpad can affect its sensitivity. Clean the pad by using adhesive tape to remove the dust and grease on its surface.  If water or liquid is split onto the computer, wipe it dry and clean when possible. Though your computer is water-proof, do not leave the computer wet when you can dry it.   If the computer gets wet where the temperature is 0 °C (32 °F) or below, freeze damage may occur. Make sure to dry the wet computer.
 7-6   Caring for the Computer Battery PackBattery PackBattery PackBattery Pack    GuidelinesGuidelinesGuidelinesGuidelines     Recharge the battery pack when it is nearly discharged. When recharging, make sure that the battery pack is fully charged. Doing so may avoid harm to the battery pack.  The battery pack is a consumable product and the following conditions will shorten its life: – when frequently charging the battery pack – when using, charging, or storing the battery in high temperature    condition  To avoid hastening the deterioration of the battery pack thereby prolonging its useful life, minimize the number of times you charge it so as not to frequently increase its internal temperature.  Charge the battery pack between 10°C ~ 30°C (50°F ~ 86°F) temperature range. A higher environment temperature will cause the battery pack’s temperature to rise. Avoid charging the battery pack inside a closed vehicle and in hot weather condition. Also, charging will not start if the battery pack is not within the allowed temperature range.  It is recommended that you do not charge the battery pack more than once a day.  It is recommended that you charge the battery pack with the computer’s power off.  To maintain the battery pack’s operating efficiency, store it in a cool dark place removed from the computer and with 30% ~ 40% charge remaining.  Important guidelines when using the battery pack.  When installing or removing the battery pack take note of the following:
 Caring for the Computer   7-7 – avoid installing or removing the battery pack when the computer is    in Sleep mode. Abruptly removing the battery pack may cause loss    of data or the computer may become unstable. – avoid touching the battery pack terminals or damage may occur,    thereby causing improper operation to it or the computer.  The computer’s input voltage and surrounding temperature will directly affect the battery pack’s charge and discharge time: – charging time will be prolonged when the computer is turned on.   To shorten the charging time, it is recommended that you place the    computer in sleep or hibernation mode. – a low temperature will prolong the charging time as well as hasten    the discharge time.  When using battery power in an extremely low temperature environment, you may experience shortened operating time and incorrect battery level reading. This phenomenon comes from the chemical characteristics of batteries. The appropriate operating temperature for the battery is -10 °C ~ 50 °C (14 °F ~ 122 °F). TouchscreenTouchscreenTouchscreenTouchscreen    GuiGuiGuiGuidelinesdelinesdelinesdelines     Use the finger or the included touchscreen pen on the display. Using a sharp or metallic object other than your finger or touchscreen pen may cause scratches and damage the display, thereby causing errors.  Avoid using excessive force that may cause damage to the display.  Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface.  Turn off the computer power when cleaning the display. Cleaning the display with the power on may cause improper operation.
 7-8   Caring for the Computer  Do not use excessive force on the display. Avoid moving the computer while holding the display or twisting the display. Avoid placing objects on top of the display as this may cause the glass to break thereby damaging the display.  Using the touchscreen during low temperature (less than 5oC) may cause a slower response time, this is normal. A normal response time may be restored upon returning to room temperature.  When there is a noticeable discrepancy in the placement of the stylus on the screen and the indicated position of the onscreen pointer, use the calibration utility to recalibrate the touchscreen display.
 Caring for the Computer   7-9 When TrWhen TrWhen TrWhen Travelingavelingavelingaveling     Before traveling with your computer, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data.  Make sure that the battery pack is fully charged.  Make sure that the computer is turned off and the top cover is securely closed.  Do not leave objects in between the keyboard and closed display.  Disconnect the AC adapter from the computer and take it with you. Use the AC adapter as the power source and as a battery-charger.  Hand-carry the computer. Do not check it in as luggage.  If you need to leave the computer in the car, put it in the trunk of the car to avoid exposing the computer to excessive heat.  When going through airport security, it is recommended that you send the computer and flash disks through the X-ray machine (the device you set your bags on). Avoid the magnetic detector (the device you walk through) or the magnetic wand (the handheld device used by security personnel).  If you plan to travel abroad with your computer, consult your dealer for the appropriate AC power cord for use in your country of destination.
 Troubleshooting   8-1 Chapter 8Chapter 8Chapter 8Chapter 8     TroubleshootingTroubleshootingTroubleshootingTroubleshooting    Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.
 8-2   Troubleshooting Preliminary ChecklistPreliminary ChecklistPreliminary ChecklistPreliminary Checklist    Here are helpful hints to follow before you take further actions when you encounter any problem:  Try to isolate which part of the computer is causing the problem.  Make sure that you turn on all peripheral devices before turning on the computer.  If an external device has a problem, make sure that the cable connections are correct and secure.  Make sure that the configuration information is properly set in the BIOS Setup program.  Make sure that all the device drivers are correctly installed.  Make notes of your observations. Are there any messages on the screen? Do any indicators light? Do you hear any beeps? Detailed descriptions are useful to the service personnel when you need to consult one for assistance. If any problem persists after you follow the instructions in this chapter, contact an authorized dealer for help.
 Troubleshooting   8-3 Solving Common ProblemsSolving Common ProblemsSolving Common ProblemsSolving Common Problems    Battery ProblemsBattery ProblemsBattery ProblemsBattery Problems    The battery does not charge (Battery Charge indicator does not light yellow).  Make sure that the AC adapter is properly connected.  Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature.  Make sure that the battery pack is installed correctly.  Make sure that the battery terminals are clean. The operating time of a fully charged battery becomes shorter.  If you often partially recharge and discharge, the battery might not be charged to its full potential. Initialize the battery to solve the problem. The battery operating time indicated by the battery meter does not match the actual operating time.  The actual operating time can be different from the estimated time, depending on how you are using the computer. If the actual operating time is much less than the estimated time, initialize the battery.  Bluetooth ProblemsBluetooth ProblemsBluetooth ProblemsBluetooth Problems    I cannot connect to another Bluetooth-enabled device.  Make sure that both devices have activated Bluetooth.  Make sure that the distance between the two devices is within the limit and that there are no walls or other obstructions between the devices.  Make sure that the other device is not in “Hidden” mode.  Make sure that both devices are compatible.
 8-4   Troubleshooting Display ProblemsDisplay ProblemsDisplay ProblemsDisplay Problems    Nothing appears on the screen.  During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back.  The brightness level might be too low. Increase brightness.  The display output might be set to an external device. To switch the display back to the LCD, press the Fn+F5Fn+F5Fn+F5Fn+F5 hot key or change the display through the settings in DisplayDisplayDisplayDisplay Properties. The characters on the screen are dim.  Adjust the brightness and/or contrast. The display brightness cannot be increased.  As a protection, the display brightness will be fixed at a low level when the surrounding temperature is too high or too low. It is not a malfunction in this situation. Bad dots appear on the display at all times.  A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology. It is not regarded as a LCD defect. Resolution cannot be adjusted to desired setting.  Make sure that the VGA driver is installed correctly. The external The external The external The external monitor displays nothing.monitor displays nothing.monitor displays nothing.monitor displays nothing.     Make sure that the monitor is turned on.  Make sure that the monitor’s signal cable is properly connected.  Switch the display to the monitor by pressing the FnFnFnFn+F5F5F5F5 hot key or change the display through the settings in DisplayDisplayDisplayDisplay Properties.
 Troubleshooting   8-5 Simultaneous display/multi-display does not work.  Make sure that you turn on the external monitor before turning on the computer.  Press the Fn+F5 Fn+F5 Fn+F5 Fn+F5 hot key to toggle through the display options or change the settings in DisplayDisplayDisplayDisplay Properties in Windows. HHHHardware Device Problemsardware Device Problemsardware Device Problemsardware Device Problems    The computer does not recognize a newly installed device.  The device may not be correctly configured in the BIOS Setup program. Run the BIOS Setup program to identify the new type.  Make sure if any device driver needs to be installed. (Refer to the documentation that came with the device.)  Make sure if the device needs any jumper or switch settings. (Refer to the documentation that came with the device.)  Check the cables or power cords for correct connections.  For an external device that has its own power switch, make sure that the power is turned on. Hard Disk Drive ProblemsHard Disk Drive ProblemsHard Disk Drive ProblemsHard Disk Drive Problems    The hard disk drive error message appears on the screen.  The hard disk drive has defects. Ask your dealer for help. The hard disk drive operations seem slow.  The data files stored on the hard disk drive may be fragmented. Use a tool such as Window’s Disk Defragmenter Disk Defragmenter Disk Defragmenter Disk Defragmenter to defragment the files. The hard disk drive in-use indicator glows without blinking.  The data files stored on the hard disk drive may be fragmented. Use a tool such as Window’s Disk DefragmenterDisk DefragmenterDisk DefragmenterDisk Defragmenter to defragment the files.
 8-6   Troubleshooting Keyboard, Mouse, and Touchpad ProblemsKeyboard, Mouse, and Touchpad ProblemsKeyboard, Mouse, and Touchpad ProblemsKeyboard, Mouse, and Touchpad Problems    The keyboard does not respond.  Try connecting an external keyboard. If it works, contact an authorized dealer, as the internal keyboard cable might be loose. Water or liquid is spilt into the keyboard.  Immediately turn off the computer and unplug the AC adapter. Then turn the keyboard upside down to drain the liquid out of the keyboard. Make sure to clean up any part of the spill you can get to. Though the keyboard of your computer is spill-proof, liquid will remain in the keyboard enclosure if you don’t remove it. Wait for the keyboard to air dry before using the computer again. The numeric keypad is disabled.  Make sure that the Num LockNum LockNum LockNum Lock is switched on. (Check if the Num Lock Indicator glows or not.) The touchpad does not work, or the pointer is difficult to control with the touchpad.  Make sure that the touchpad is clean. LAN ProblemsLAN ProblemsLAN ProblemsLAN Problems    I cannot access the network.  Make sure that the LAN driver is correctly installed.  Make sure that the LAN cable is properly connected to the RJ-45 connector and the network hub.  Make sure that the network configuration is appropriate.  Make sure that the user name or password is correct.
 Troubleshooting   8-7 Modem ProblemsModem ProblemsModem ProblemsModem Problems    The modem does not work.  Make sure that the modem driver is correctly installed.  Make sure that the telephone line is properly connected.  Make sure that the COM port in the communication software is correctly set.  Turn off power management. Power Management ProblemsPower Management ProblemsPower Management ProblemsPower Management Problems    The computer does not enter Sleep or Hibernation mode automatically.  If you have a connection to another computer, the computer does not enter Sleep or Hibernation mode if the connection is actively in use.  Make sure that the Sleep or Hibernation time-out is enabled. The computer does not enter Sleep or Hibernation mode immediately.  If the computer is performing an operation, it normally waits for the operation to finish. The computer does not resume from Sleep or Hibernation mode.  The computer automatically enters Sleep or Hibernation mode when the battery pack is empty. Do any one of the following: − Connect the AC adapter to the computer. − Replace the empty battery pack with a fully charged one. The computer does not enter Hibernation mode with the Fn+F12 hot keys.  Make sure that the Hibernation function is specified for the sleep button.  You might be using a PC card that prevents the computer from entering Hibernation mode. To enter the mode, stop the communication program and then remove the card or stop the card.
 8-8   Troubleshooting Software ProblemsSoftware ProblemsSoftware ProblemsSoftware Problems    An application program does not work correctly.  Make sure that the software is correctly installed.  If an error message appears on the screen, consult the software program’s documentation for further information.  If you are sure the operation has stop, reset the computer. (See “Resetting the Computer” later in this chapter.) Sound ProblemsSound ProblemsSound ProblemsSound Problems    No sound is produced.  Make sure that the volume control is not set too low.  Make sure that the audio driver is correctly installed.  Make sure that the computer is not in Sleep mode.  If using an external speaker, make sure that the speaker is properly connected. Distorted sound is produced.  Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound. The sound system does not record.  Adjust the playback or recording sound levels. The external microphone or audio device does not work.  Make sure that the microphone is connected to the proper connector on the computer.  Make sure that your computer is equipped with the driver needed.  Click the speaker symbol on the taskbar and check the Windows volume control.
 Troubleshooting   8-9  Check the volume control of your computer. Startup ProblemsStartup ProblemsStartup ProblemsStartup Problems    When you turn on the computer, it does not seem to respond.  Make sure that either the AC adapter is connected or the battery has power.  For models with the HDD heater option: When turning on the computer in an extremely low temperature environment, the computer will heat up the hard disk before starting up. The hard disk drive in-use indicator blinks red to indicate the heater is on. (In conditions where the AC adapter is connected and the temperature is above an acceptable range, the computer will display messages on the screen informing you of the heating process; in other conditions, the screen is simply blank.) Wait till the heating is finished. However, if external AC power is not available and the remaining battery power is too low for the heating to complete, the computer may not start up. In case the computer fails to start up, turn off the computer and leave it in room temperature for about an hour before trying to turn it on again. When you turn on the computer, it stops after POST.  Restart your computer. WLAN ProblemsWLAN ProblemsWLAN ProblemsWLAN Problems    I cannot use the WLAN feature.  Make sure that the mini PCI-E WLAN card is correctly installed.  Make sure that the necessary driver(s) is correctly installed.  Make sure that the WLAN feature is turned on. Transmission quality is poor.  Your computer may be in an out-of-range situation. Move your computer closer to the Access Point or another WLAN device it is associated with.
 8-10   Troubleshooting  Check if there is high interference around the environment and solve the problem as described next. Radio interference exists.  Move your computer away from the device causing the radio interference such as microwave oven and large metal objects.  Plug your computer into an outlet on a different branch circuit from that used by the affecting device.  Consult your dealer or an experienced radio technician for help. I cannot connect to another WLAN device.  Make sure that the WLAN feature is turned on.  Make sure that the SSID setting is the same for every WLAN device in the network.  Your computer is not recognizing changes. Restart the computer.  Make sure that the IP address or subnet mask setting is correct. I cannot communicate with the computer in the network when Infrastructure mode is configured.  Make sure that the Access Point your computer is associated with is powered on and all the LEDs are working properly.  If the operating radio channel is in poor quality, change the Access Point and all the wireless station(s) within the BSSID to another radio channel.  Your computer may be in an out-of-range situation. Move your computer closer to the Access Point it is associated with.  Make sure that your computer is configured with the same security option (encryption) to the Access Point.  Use the Web Manager/Telnet of the Access Point to check whether it is connected to the network.
 Troubleshooting   8-11  Reconfigure and reset the Access Point. I cannot access the network.  Make sure that the necessary driver(s) is correctly installed.  Make sure that the network configuration is appropriate.  Make sure that the user name or password is correct.  You have moved out of range of the network.  Turn off power management. Other ProblemsOther ProblemsOther ProblemsOther Problems    The date/time is incorrect.  Correct the date and time via the operating system or BIOS Setup program.  After you have performed everything as described above and still have the incorrect date and time every time you turn on the computer, the RTC (Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace the RTC battery.
 8-12   Troubleshooting ResettingResettingResettingResetting    the Computerthe Computerthe Computerthe Computer    You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the computer operation seems to hang up, first wait. It is possible that the computer is processing data. Periodically check the hard disk drive in-use indicator, if it flashes irregularly, the program may be accessing data and preventing you from using the keyboard. If you are sure the operation has stopped and you cannot use the “restart” function of the operating system, reset the computer. Reset the computer by any one of these methods:  Press Ctrl+Alt+Del Ctrl+Alt+Del Ctrl+Alt+Del Ctrl+Alt+Del on your built-in keyboard.  Press the Reset button      on the front panel of your computer.  If the above action does not work, press and hold the power button for more than 5 seconds to force the system to turn off. Then turn on the power again. CAUTION: Resetting will cause any unsaved data to be lost.
 Specifications   A-1 Appendix AAppendix AAppendix AAppendix A     SpecificationsSpecificationsSpecificationsSpecifications    NOTE: Specifications are subject to change without any prior notice.  PartsPartsPartsParts     SpecificationsSpecificationsSpecificationsSpecifications    CPU  Intel® Ivy Bridge i5-3320M, 2.6G, 35W Chipset  Intel® Panther Point QM77 Memory  Up to 8 GB, 240-pin × 2, DDRIII 1333MHz SO-DIMM BIOS  8 MB EEPROM, system and VGA BIOS, Plug-and-Play, ACPI 2.0 capability Display  Panel  12.1-inch TFT LCD, resolution up to 1280×800 WXGA, Touchscreen function and/or Digitizer feature (option) ,  Sunlight-readable with 1200 nits brightness after touchscreen,   Ultra low brightness (option) Video controller  Integrated in Intel® Ivy Bridge Audio  Features  Azalia interface, left/right-channel analog output for line-out connector Speaker  One built-in Keyboard  Standard keys with numeric pad keys, 12 function keys, special FnFnFnFn (Function) key and Windows keys Water-proof and dust-proof membrane, large character printing, water-proof rubber (option), membrane backlight (option) Pointing device  Glide touchpad with 2 buttons, capacitance-type Resistive (Glove) touchpad (option) Hard disk drive  SATA 3 interface, 320GB, HDD heater for -20 °C low temperature (option),  128GB solid state disk (option) PC Card /ExpressCard/Smart card support Standard:    ExpressCard/54 + PC card Option: Smart card + ExpressCard/54
 A-2   Specifications  PartsPartsPartsParts     SpecificationsSpecificationsSpecificationsSpecifications    Memory card reader   SD/SDHC/SDXC I/O ports  USB 3.0  x 2, USB 2.0, Mini 1394a, serial (RS-232), RJ-45, RJ-11, headphone out, microphone, VGA, docking (100-pin) Antenna  Wi-Fi 802.11a/b/g/n + Bluetooth 2.4G 2 internal (pass-through for external antenna – option) WCDMA/HSDPA  2 internal (pass-through for external antenna – option) GPS 1.5G (option) 1 internal Modem  Azalia interface, 56 Kbps, ITU V.90 MDC 1.5 internal fax modem LAN  IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-T, IEEE 802.3ab 1000Base-T Ethernet Wireless LAN + Bluetooth  Intel® Centrino Advanced-N 6235, 802.11 a/b/g/n WLAN booster (option) Blutooth 4.0 class 1 + EDR Camera  2M pixel (EDOF), 225-degree rotation GPS (option)  EB-5318RF WWAN (option)  WCDMA/HSDPA Security  Kensington lock TPM 1.2 Fingerprint scanner (option) Handle  Grip and cross-type hand strap Power  AC adapter   Universal 90 W; input: 100∼240 V, 50/60 Hz; output: 19 V Battery  Li-ion smart 9-cell battery 8700 mAH / 10.8 V Li-ion smart 6-cell battery 6140 mAH / 10.8V (option) user-swappable, under -20 oC combined with hard drive low temperature solution Dimension (L×W×H)  314×227×49 mm (12.4×8.74×1.93 inch) Weight  2.8 kg (5.95 lb)
 Specifications   A-3 PartsPartsPartsParts     SpecificationsSpecificationsSpecificationsSpecifications    Environment  Temperature  Operating:  0 °C (32 °F) to 60 °C (140 °F)         -20 °C (-4 °F) to 60 °C (140 °F) – low temperature         option Non-operating: -51 °C (-60 °F) to 71 °C (160 °F) Humidity  5 % to 95 % relative, non-condensing Altitude  Operating: 15,000 ft Non-operating: 40,000 ft Shock  Operating: 40 g, 11 ms, sawtooth pulse Environment  Vibration  Integrity:  MIL-STD-810G, Method 514.6, E-1, Category 24,    minimum integrity Vehicle:    MIL-STD-810G, Method 514.6, C-1, Category 4, Secured   Cargo   MIL-STD-810G, Method 514.6, C-1, Category 20,    Ground Vehicle Drop  100 cm drop 26 times onto plywood plate surface Enclosure  IP65 (with input/output doors closed) ESD  Air discharge: 0~8 KV (included) no error; 9~15 KV allow soft error Contact discharge: 0~6 KV (included) no error; 7~8 KV allow soft error Regulation  EMC  FCC part 15, subpart B, class B, CE, CCC Safety  UL, TUV, TUV/CB, E-mark Green Product Coverage RoHS  6 European union banned materials, EPEAT Other  12 universal GP product banned materials, ENERGY STAR, WEEE
 Regulatory Information   B-1 Appendix BAppendix BAppendix BAppendix B     Regulatory InformationRegulatory InformationRegulatory InformationRegulatory Information    This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.
 B-2   Regulatory Information On the Use of the SystemOn the Use of the SystemOn the Use of the SystemOn the Use of the System    Class B RegulationsClass B RegulationsClass B RegulationsClass B Regulations    USAUSAUSAUSA    Federal Communications Commission Radio Frequency Interference Statement NOTE:NOTE:NOTE:NOTE:    This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Please note:Please note:Please note:Please note:    The use of a non-shielded interface cable with this equipment is prohibited.
 Regulatory Information   B-3 CanadaCanadaCanadaCanada    Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada. UL1604UL1604UL1604UL1604    Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation Instructions     This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D OR non-hazardous locations only.  WARNING – EXPLOSION HAZARD – Do not disconnect equipment unless power has been removed or the area is known to be non-hazardous.  WARNING – EXPLOSION HAZARD - Substitution of components may impair suitability for Class I, Division 2.  Non-LPS or TNV output connectors identify the type of circuit, intended cable type or relevant circuit characteristics.  "IMPORTANT SAFETY INSTRUCTIONS - When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: −  Do not use this product near water for example, near a bathtub,
 B-4   Regulatory Information   washbowl, kitchen sink or laundry tub, in a wet basement or near a    swimming pool.  −  Avoid using a telephone (other than a cordless type) during an electrical    storm. There may be a remote risk of electric shock from lightning. −  Do not use the telephone to report a gas leak in the vicinity of the leak.  Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. “SAVE THESE INSTRUCTIONS" Safety NoticesSafety NoticesSafety NoticesSafety Notices    About the BatteryAbout the BatteryAbout the BatteryAbout the Battery    Caution Texts Concerning Lithium Batteries DANISH ADVARSEL! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. NORWEGIAN ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. SWEDISH VARNING: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. FINNISH VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo
 Regulatory Information   B-5 ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. FRENCH ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Attention (for USA Users)    The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. About the AC AdapterAbout the AC AdapterAbout the AC AdapterAbout the AC Adapter     Use only the AC adapter supplied with your computer. Use of another type of AC adapter will result in malfunction and/or danger.  Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet.  Allow adequate ventilation around the adapter when using it to operate the device or charge the battery. Do not cover the AC adapter with paper or other objects
 B-6   Regulatory Information that will reduce cooling. Do not use the AC adapter while it is inside a carrying case.  Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging.  Do not use the adapter if the cord becomes damaged.  Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the ModemAbout the ModemAbout the ModemAbout the Modem    Caution  Never install telephone wiring during a lightning storm.  Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.  Never touch non-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.  Use caution when installing or modifying telephone lines.  Avoid using the telephone function (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.  Do not use the telephone function to report a gas leak in the vicinity of the leak.  Do not use this product near water, for example near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Caution (for USA Users) To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.
 Regulatory Information   B-7 On tOn tOn tOn the Use of the RF Devicehe Use of the RF Devicehe Use of the RF Devicehe Use of the RF Device    NOTE: The information in this section applies to models with the wireless LAN module.  USA and Canada Safety Requirements and NoticesUSA and Canada Safety Requirements and NoticesUSA and Canada Safety Requirements and NoticesUSA and Canada Safety Requirements and Notices    IMPORTANT NOTE:IMPORTANT NOTE:IMPORTANT NOTE:IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Radio FrequencyRadio FrequencyRadio FrequencyRadio Frequency    Interference RInterference RInterference RInterference Requirements and SARequirements and SARequirements and SARequirements and SAR The FCC with its action in ET Docket 93-62 has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless LAN module meets the Human Exposure limits found in OET Bulletin 65, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits. The following safety precautions should be observed:  Do not touch or move antenna while the unit is transmitting or receiving.  Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting.  Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged. Use in specific environments:     The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments.
 Regulatory Information   B-9 EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. The FCC limits are designed to provide reasonable protection against harmful interference when the equipment is installed and used in accordance with the instruction manual and operated in a commercial environment. However, there is no guarantee that interference will not occur in a particular commercial installation, or if operated in a residential area. If harmful interference with radio or television reception occurs when the device is turned on, the user must correct the situation at the user’s own expense. The user is encouraged to try one or more of the following corrective measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. CAUTION: CAUTION: CAUTION: CAUTION: The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by the manufacturer could void the user’s authority to operate this device.
 B-10   Regulatory Information Canada Radio Frequency Interference RequirementsCanada Radio Frequency Interference RequirementsCanada Radio Frequency Interference RequirementsCanada Radio Frequency Interference Requirements    To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. European Union CE Marking and Compliance European Union CE Marking and Compliance European Union CE Marking and Compliance European Union CE Marking and Compliance NoticesNoticesNoticesNotices    Statements of ComplianceStatements of ComplianceStatements of ComplianceStatements of Compliance    EnglishEnglishEnglishEnglish This product follows the provisions of the European Directive 1999/5/EC. DanishDanishDanishDanish Dette produkt er i overensstemmelse med det europæiske direktiv 1999/5/EC. DutchDutchDutchDutch Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC. FinnishFinnishFinnishFinnish Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä. FrenchFrenchFrenchFrench Ce produit est conforme aux exigences de la Directive Européenne 1999/5/EC. GermanGermanGermanGerman Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 1999/5/EC. GreekGreekGreekGreek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC.
 Regulatory Information   B-11 IcelandicIcelandicIcelandicIcelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC. ItalianItalianItalianItalian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. NorwegianNorwegianNorwegianNorwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC. PortuguesePortuguesePortuguesePortuguese Este produto cumpre com as normas da Diretiva Européia 1999/5/EC. SpanishSpanishSpanishSpanish Este producto cumple con las normas del Directivo Europeo 1999/5/EC. SwedishSwedishSwedishSwedish Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC. Local Restrictions of 802.11a/g/n RadioLocal Restrictions of 802.11a/g/n RadioLocal Restrictions of 802.11a/g/n RadioLocal Restrictions of 802.11a/g/n Radio    UsageUsageUsageUsage    CAUTION:CAUTION:CAUTION:CAUTION: Due to the fact that the frequencies used by 802.11a/g/n wireless LAN devices may not yet be harmonized in all countries, 802.11a/g/n products are designed for use only in specific countries or regions, and is not allowed to be operated in countries or regions other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use. Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such. The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows:
 B-12   Regulatory Information General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading “Turning Off the Wireless LAN Radio”. France Departments in Which the Wireless LAN Module Can Be Used (Indoors Only) The wireless LAN module can currently be used indoors only in the following 38 departments of mainland France. Please turn off your wireless LAN radio when operating the device in areas/places other than the 38 departments listed: 01  Ain Orientales  36 Indre  66 Pyrénées 02 Aisne  37 Indre et Loire  67 Bas Rhin 03 Allier  41 Loir et Cher  68 Haut Rhin 05 Hautes Alpes  42 Loire  70 Haute Saône 08 Ardennes  45 Loiret  71 Saône et Loire 09 Ariège  50 Manche  75 Paris 11  Aude  55 Meuse  82 Tarn et Garonne 12  Aveyron  58 Nièvre  84 Vaucluse 16  Charente  59 Nord  88 Vosges 24 Dordogne  60 Oise  89 Yonne 25 Doubs  61 Orne  90 Territoire de Belfort 26 Drôme  63 Puy du Dôme  94 Val de Marne 32 Gers  64 Pyrénées Atlantique
 Regulatory Information   B-13 Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown in the Previous Table Frequency Ranges Frequency Ranges Frequency Ranges Frequency Ranges (MHz)(MHz)(MHz)(MHz)    IndoorsIndoorsIndoorsIndoors     OutdoorsOutdoorsOutdoorsOutdoors    2400 – 2446.5  10 mW  Not permitted 2446.5 – 2483.5  100 mW 100 mW on private property with Ministry of Defense approval  Turning Off the Wireless LAN RadioTurning Off the Wireless LAN RadioTurning Off the Wireless LAN RadioTurning Off the Wireless LAN Radio    NNNNOTE: OTE: OTE: OTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card. It is not necessary to disable the card to meet the regulatory requirements. While operating the computer in those French departments that do not allow use of the wireless LAN equipment, the user of the equipment must turn off the wireless LAN radio in order to comply with local regulations.

Navigation menu