Getac Technology EM7355Z Radio Module User Manual ZX70 English Manual add IC terms

Download:
Mirror Download [FCC.gov]
Document ID	3212492
Application ID	OTRvcAXqvzLH3zA30Xhbsw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	190.31kB (2378904 bits)
Date Submitted	2016-11-30 00:00:00
Date Available	2017-05-30 00:00:00
Creation Date	2016-11-17 12:43:44
Producing Software	FREE PDFill PDF and Image Writer
Document Lastmod	2016-11-23 15:32:07
Document Title	Microsoft Word - ZX70 English Manual_add IC terms
Document Creator	PScript5.dll Version 5.2.2
Document Author:	celina.chen

ZX70
USER MANUAL
Rugged Mobile Computing Solutions
October 2016
Trademarks
Google and Google Play logo are trademarks of Google Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
All other brand and product names are trademarks or registered trademarks of their
respective companies.
Disclaimer
Specifications and manuals are subject to change without notice. Getac assumes
no liability for damage incurred directly or indirectly from errors, omissions, or
discrepancies between the device and the manuals.
Notes
Depending on the specific model purchased, the color and look of your device and
accessories may not exactly match the graphics shown in this document.
The screenshots and other presentations shown in this document are for reference
only. They may differ from the actual screens and presentations generated by the
actual product.
Your device is based on Google’s Android 5.1.1 operating system, with additions
by Getac.
For the latest version of the manual, please visit the Getac website at www.getac.com.
Table of Contents
Chapter 1 Getting Started ..................................................
.................................................. 1
Identifying Hardware Components ........................................ 1
Front Components ........................................................ 1
Back Components ........................................................ 3
Top Components .......................................................... 4
Bottom Components ...................................................... 5
Left-Side Components................................................... 6
Getting Your Device Ready for Use .................................... 7
Installing the SIM Card (Select Models Only) .................. 7
Connecting to AC Power and Charging the Battery ............ 8
Performing the Initial Startup .......................................... 9
Chapter 2 Basic Skills................................
Skills........................................................
........................................................ 10
Waking Up and Shutting Down ......................................... 10
Navigating on the Screen................................................. 10
Touch Mode .............................................................. 12
Auto Rotate ............................................................... 12
Home Screen ................................................................ 12
Extensions to the Home Screen .................................... 13
Customizing Your Home Screen ..................................... 13
Using Applications ........................................................... 14
Navigation Bar ............................................................... 14
Status Bar and Notifications Panel ..................................... 15
Quick Settings ............................................................... 15
Entering Information......................................................... 16
Chapter
Chapter 3 Getting Connected................................
Connected...........................................
........................................... 17
Wireless Connections ....................................................... 17
Using WWAN (Select Models Only) .............................. 17
Using Wi-Fi Networks ................................................. 17
Using the Bluetooth Function ......................................... 18
External Connections ....................................................... 19
Using a MicroSD Card ................................................ 19
Connecting to a Computer via USB .............................. 20
Chapter 4 Android Preinstalled Applications ................. 22
Google Applications Overview ........................................... 22
Camera ....................................................................... 24
Taking Pictures .......................................................... 24
Taking Panoramic Pictures ........................................... 25
Shooting Videos ......................................................... 25
Chapter 5 Getac Applications ..........................................
.......................................... 27
Barcode Utility and Configuration (Select Models Only) ....... 27
Barcode Utility ........................................................... 27
Barcode Config .......................................................... 29
File Manager ................................................................ 30
Button Descriptions ..................................................... 30
Opening a File ........................................................... 31
GPS-ECompass ............................................................ 32
Satellite Position ........................................................ 32
Electronic Compass .................................................... 33
Location Information .................................................... 34
Settings ................................................................... 34
GPS Logging ............................................................ 35
RFID Reader Utility (Select Models Only)......................... 36
GU1000 UHF RFID Reader (Select Models Only) ............. 37
Chapter 6 Managing Your Device................................
Device.....................................
..................................... 39
Managing Power............................................................ 39
Low Battery Signals and Actions ................................... 39
Power-Saving Tips ..................................................... 40
Settings ........................................................................ 41
ii
Wireless and Networks Settings ..................................... 41
Device Settings ......................................................... 42
Personal Settings ....................................................... 43
System Settings ......................................................... 44
Chapter 7 Care and Maintenance ....................................
.................................... 45
Resetting Your Device .................................................... 45
Caring for Your Device .................................................. 45
Chapter 8 Regulatory Information ..................................
.................................. 47
Regulations Statements ................................................... 47
USA Class B Regulations ............................................ 47
European Union CE Marking and Compliance Notices ........ 51
Safety Precautions ......................................................... 52
About Charging ......................................................... 52
About the AC Adapter ................................................ 52
iii
Chapter 1
Getting Started
This chapter introduces you to the external components of your device and guides
you through the process of setting up your device for use.
Identifying Hardware Components
Front Components
Ref
Component
Description
Camera lens
Takes still pictures or records video clips. The front lens
supports 2 MP.
Light sensor
Senses the ambient light for automatic adjustments of the
display backlight.
Ref
Component
Description
Indicators
Power
Lights blue when the device is turned on.
Blinks blue when the device is in Sleep mode.
RF (Radio
Frequency)
Blinks blue when the RF radio of any RF feature
(WLAN/Bluetooth/WWAN) is on.
Battery
Charge
Lights amber when the battery is being charged.
Lights green when battery charging is completed.
Blinks red when the battery’s capacity is below 10%.
Blinks amber when the battery charging is in an abnormal
state. Replace the battery in case this happens.
Microphone
Receives sound and voice.
Touch screen
Displays the output of your device and responds to your
touching.
Back Components
Ref
Component
Description
Flash
Provides extra light when taking pictures.
Camera lens
Takes still pictures or records video clips. The rear lens
supports 8 MP with auto focus.
Reserved
RFID antenna
antenna
(optional)
Inside is the RFID antenna that reads RFID
(Radio-frequency identification) tags.
Speaker
Plays music, sounds and voices.
Top Components
Ref
Component
Description
Barcode reader
lens (optional)
Scans and reads barcodes.
Power button
Starts up your device.
Turns off or restores the screen.
When pressed longer:
Opens a menu with Power off option.
Minus button
Decreases the sound volume (default setting).
The type of sound adjusted depends on the current
operation.
Can be assigned to a different function through Settings.
Plus button
Increases the sound volume (default setting).
The type of sound adjusted depends on the current
operation.
Can be assigned to a different function through Settings.
Fn (Function)
button
Provides the “trigger” function (default setting).
Depending on your model, it serves as one of the below.
- Trigger button for the barcode reader/RFID reader.
- Shutter button for the camera.
Can be assigned to a different function through Settings.
Bottom Components
Ref
Component
Description
WWAN passassthrough connector
(optional)
Connects the external antenna for WWAN (wireless wide
area network) connectivity.
GPS passass-through
connector
(optional)
Connects the external antenna for GPS signal reception.
Docking connector
Connects to the office or vehicle dock (purchased
separately).
Micro USB client
connector
Connects to a computer via USB cable for data transfer.
USB host connector
Connects to a USB device.
LeftLeft-Side Components
Ref
Component
Tether holder
Description
For holding a tether.
There is one holder on the left side and another on
the right side.
MicroSD card slot
Accepts a microSD card for removable storage.
(inside the cover)
SIM card slot
Accepts a SIM card for the WWAN function.
(optional) (inside
the cover)
Power Connector
Connects to the AC adapter.
Getting Your Device Ready for Use
Installing the SIM Card (Select Models Only)
1.
Remove the screw from the I/O cover and flip open the cover.
2. With the SIM card’s chip side facing the back of the device and the beveled corner
pointing to the slot, insert the card all the way into the slot.
NOTE: To remove the SIM card, slightly push in the card to
release it and then pull the card out of the slot.
3. Close the cover and tighten the screw.
CAUTION: For protection, make sure you secure the cover with
the screw.
Connecting to AC Power and Charging the Battery
Battery
1.
Fit the converter plug to the AC adapter (
).
2. Connect the DC jack end of the AC adapter to your device () and the other
end to a wall outlet ().
Converter Plug
3. The charge indicator glows in amber when charging is in progress. Do not
disconnect your device from AC power until the battery is fully charged, as
indicated by the amber indicator turning into green. This will take a couple of
hours.
CAUTION: For optimal performance of the lithium battery, take
note of the following:
 Use the included AC adapter only.
 There is no need to fully discharge the battery before
charging. You can charge the battery before it is discharged.
 Do not charge the battery where the temperature is high (e.g.
in direct sunlight).

As a battery protection, store the device where the
temperature is appropriate. Avoid high temperatures.
The battery can be charged when its temperature is between
0°C (32°F) and 40°C (104°F).
If you will not use the product for a long period of time,
be sure to fully charge the
battery at least once
every two weeks. Over discharge of the battery can affect
the charging performance.
Performing the Initial Startup
When turning on your device for the very first time, you will be guided through
a setup process.
1.
Make sure that your device is either connected to AC power or the battery has
power.
2. Press the power button.
The device powers up and displays the initial screen.
3. Follow the on-screen instructions to complete the initial setup process.
After the setup is completed, the Home screen appears. You can now use your
device.
Chapter 2
Basic Skills
This chapter familiarizes you with the basic operations of your device.
CAUTION: The device can get uncomfortably warm when you use it in
high temperatures. In such a circumstance, please take safety
measures (such as wearing gloves) to protect yourself.
Prolonged body contact can cause discomfort and potentially a
burn.
Waking Up and Shutting Down
Your device sleeps after a period of inactivity. To wake up, press the power button
and, at the lock screen, drag the lock icon to the other side of the screen.
To shut down, press and hold the power button until a menu pops up. Touch Power
off and then OK.
OK
Navigating on the Screen
Use your finger to navigate and select objects on the screen.
10
Here are some common terms that you should know when using the touch screen:
Touch
Touch the screen once with your finger to open an item or select an object.
Touch and hold
Touch and hold your finger on an item to see a list of actions available for
that item.
Drag
Hold your finger on an item and, without lifting the finger, move across the
screen until you reach the target position.
Swipe or slide
Move your finger across the screen, without pausing when you first touch it
(so you don’t “drag” instead). For example, you slide the screen up or down
to scroll a list.
Pinch
In some applications (such as Maps and Gallery), you can zoom in and out
by placing two fingers on the screen at once and pinching them together (to
zoom out) or spreading them apart (to zoom in).
CAUTION: Do not use sharp objects on the touch screen. Doing
so may damage the display surface.
11
Touch Mode
You can change the touch mode to suit your scenario. To quickly switch the mode,
touch one of the widgets on the Home screen.
Select this when liquids (such as
raindrops) are falling on the screen
and should be rejected as input.
Use your finger in this mode.
Select this if you are using the
stylus. This mode responds to
finger touches as well.
NOTE: The stylus should be a capacitive-tipped stylus (purchased
separately).
Auto Rotate
The display orientation changes automatically when you rotate the device. You can
disable the function through Settings.
Home Screen
The
You
that
and
Home screen is your starting point to access all the features on your device.
can have it display application icons, widgets, shortcuts, and other features
you want. The default Home screen already contains some application icons
widgets. At the bottom of every Home screen is the Favorites tray.
12
To return to the Home screen at any time, touch
at the bottom of the screen.
Extensions to the Home Screen
You can slide left or right across the Home screen to see other parts of the Home
screen. Extensions to the Home screen provide more space for widgets, shortcuts,
and other items.
Customizing Your Home Screen
You can add application icons, shortcuts, widgets, and other items to any part of
the Home screen where there’s free space. You can also change the wallpaper.
Adding an Item to the Home Screen
1.
Touch
on the Home screen.
2. Touch APPS or WIDGETS depending on the type of item you want to add.
3. Touch and hold an item to add. Drag it to the where you want to place it
and then release it.
Removing an Item from the Home Screen
Touch and hold the item you want to remove. Drag it to the X icon at the top
of the screen.
13
Using Applications
Touch
(in the Favorites tray) on the Home screen to open the All Apps screen.
The screen holds icons for all of the applications on your device. Touch an icon
to open the application.
Most applications include a Menu icon
near the top or lower right corner of
the screen. The menu contains tools that apply to the activities of the current screen
or application.
Navigation Bar
The navigation bar at the bottom of the screen provides buttons for navigation purposes
and frequently-used tasks.
Button
Name
Description
Back
Goes back to the previous screen.
Home
Opens the Home screen.
Recent
Opens a screen containing thumbnails of applications you’ve
used recently. Touch a thumbnail to open that application.
14
Status Bar and Notifications Panel
The Status bar appears at the top of almost every screen. It displays icons indicating
that you’ve received notifications (on the left) and icons indicating the current status
(on the right), along with the current time.
Status icons
Notifications icons
You can open the Notifications panel by swiping down from the top.
Quick Settings
Use Quick Settings to quickly change common settings such as screen brightness,
Wi-Fi, Bluetooth, Airplane mode, and others.
You can open Quick Settings from anywhere on your device. Swipe down from the
top to open the Notifications panel and swipe down again to open the Quick Settings
panel.
15
Entering Information
You enter text, numbers, and symbols using the onscreen keyboard. Some
applications open the keyboard automatically. In others, you touch an input field where
you want to enter text to open the keyboard.
To enter text, touch the keys on the keyboard to type. To enter numbers or symbols,
touch the Symbols key
to switch to the numbers and symbols keyboard.
16
Chapter 3
Getting Connected
This chapter tells you how you can get your device connected through a variety
of ways.
Wireless Connections
Using WWAN (Select Models Only)
NOTE: Your model only supports data transmission. Voice
transmission is not supported
Select models support UMTS/HSPA+/GSM/GPRS/EDGE) mobile telephony
communications protocol.
Mobile network is enabled by default. The icons in the Status bar indicate which
kind of data network you’re connected to and the voice and data network signal
strength.
To check or modify settings, touch
(on the Home screen)  Settings 
 More (under WIRELESS & NETWORKS) Mobile networks.
Usin
Using WiWi-Fi Networks
Turning
Turning On/Off the WiWi-Fi Radio
Go to Quick Settings and touch the Wi-Fi icon.
- Or –
Go to Settings. Find the Wi-Fi item under WIRELESS & NETWORKS. Slide the Wi-Fi
switch on or off.
17
When the Wi-Fi radio is turned on, the icon
appears in the status bar. If your
device finds a network that you connected to previously, it connects to it.
Connecting to a WiWi-Fi Network
1.
Make sure the Wi-Fi radio is on (as described in the previous section).
2. Go to Quick Settings and touch the down arrow of the Wi-Fi item.
- Or Go to Settings. Touch Wi-Fi.
3. Your device scans for available Wi-Fi networks and displays the names in the
screen.
4. On the list of discovered networks, touch the one you want to connect to.
5. If the network is secured, you’re prompted to enter a password or other
credentials.
If the network is open, you are prompted to confirm that you want to connect
to that network by touching Connect
Using the Bluetooth Function
NOTE: Getac does not guarantee the product’s compatibilities
with the Bluetooth headsets/devices from all manufacturers.
Turning
Turning On/Off the Bluetooth Radio
Go to Quick Settings and touch the Bluetooth icon.
- Or –
Go to Settings. Find the Bluetooth item under WIRELESS & NETWORKS. Slide the
Bluetooth switch on or off.
When the Bluetooth radio is turned on, the icon
18
appears in the status bar.
Pairing with a Bluetooth Device
The first time you use a new Bluetooth device with your device, you must “pair”
them, so that they know how to connect securely to each other. After that, you
can simply connect to a paired device.
1.
Make sure that the other Bluetooth device is set as “discoverable” and within
range.
2. Make sure the Bluetooth radio is on (as described in the previous section).
3. Go to Quick Settings and touch the down arrow of the Bluetooth item.
- Or Go to Settings. Touch Bluetooth.
4. Your device scans for and displays the IDs of all available Bluetooth devices
in range.
5. On the list of discovered devices, touch the ID of the device you want to pair
with.
6. The devices pair with each other. If you’re prompted to enter a passcode, try
entering 0000 or 1234 (the most common passcodes), or consult the
documentation that came with the device to learn its passcode.
If the pairing is successful, your device connects to the device.
External Connections
Using a MicroSD Card
Inserting a MicroSD Card
1.
Remove the screw from the I/O cover and flip open the cover.
2. Insert the card into the slot, with the golden contacts pointing to the slot and
facing front.
19
3. Close the cover and tighten the screw.
CAUTION: For protection, make sure you secure the cover with
the screw.
Removing MicroSD card
You can safely remove the microSD card from your device any time the device
is shut down. If you need to remove the card while the device is on, unmount
the card first to prevent corrupting or damaging the card.
To unmount:
1.
Go to Settings.
Settings
2. Touch Storage and touch Unmount SD card under EXTERNAL SD CARD.
CARD
3. Open the microSD card slot cover. Press the edge of the card to release it
and then pull the card out of the slot.
Connecting to a Computer via USB
You can connect your device to a computer with the USB cable, to transfer files
between your device and the computer.
Use the USB cable (available to you as an option) to connect the device to a
USB port on your computer.
20
21
Chapter 4
Android Preinstalled
Applications
This chapter briefly introduces the Android 5.1.1 preinstalled applications from Google.
Google Applications Overview
For instructions on using the Google applications, check Google official website for
online help.
NOTE: The table below does not include Getac applications. See
the next chapter for information on Getac applications.
Apps
Descriptions
Calculator
Use Calculator to solve arithmetic problems. You can then paste
the results into another application.
Calendar
The Calendar app works with the web-based Google Calendar
calendaring service. It also works with the Microsoft Exchange
ActiveSync calendaring service.
Camera
Use Camera to take pictures and shoot videos. (See “Camera”
later in this chapter for more information.)
Chrome
This is the web browser from Google. Sign in to sync your Chrome
browser experience from your computer
Clock
Use Clock to display the date and time in large characters on
your screen.
22
Contacts
The Contacts app gives you quick and easy access to the people
you want to reach.
Apps
Descriptions
Downloads
The Downloads app lets you to manage most downloads.
Drive
Use Drive to store your files securely in the cloud and also to
access them.
Gmail
Gmail works with Google’s web-based email service.
Google
Use Google to easily and quickly find what you need on the web
and on your device.
Google Settings
Use Google Settings to manage settings for Google apps and
services.
Hangouts
Use Hangouts to send messages, make voice and video calls,
and share photos.
Maps
This is the Google Maps app for Android.
Photos
Use Photos to manage photos and videos on your device.
Play Movies & TV
Shows
You can play digital content through the service of Google.
However, the availability of the service depends on your
geographical location. The app icons will disappear from the screen
if you are in a region where the service is currently unavailable.
Play Music
Use Play Music to organize and listen to music and audio files.
Play Store
Use Play Store to get all your applications and entertainment in
one place.
Settings
The Settings app contains most of the tools for customizing and
configuring your device. (See “Settings” in Chapter 7 for more
information.)
Sound Record
This is a tool for recording sound.
Voice Search
Use Voice Search to quickly search your device, the web, and
nearby locations by speaking, instead of typing.
23
This is the official YouTube app for Android.
YouTube
Camera
Use the Camera application to take pictures and shoot videos. In addition, you can
have GPS information embedded into the picture/video file.
Taking Pictures
1.
Open the Camera application. Touch
2. Touch
if you are not in Camera mode.
to select the front or rear camera lens.
3. To zoom in or out, drag
toward
4. If you want to adjust settings, touch
Flash mode
(rear camera only)
24
or
Return
White balance
Exposure
Advanced settings
Scene mode
5. To take the picture, touch
6. The picture you just took is displayed as a thumbnail at the corner. You can
touch the thumbnail to view the picture.
The file is saved to the internal storage of your device.
Taking Panoramic Pictures
1.
Open the Camera application. Touch
to switch to Panoramic mode.
2. Aim the camera lens at the starting point of the intended view. Touch
to start.
3. Slowly pan your device toward the other side. The status bar shows your progress.
4. To end, touch
Shooting Videos
1.
Open the Camera application. Touch
25
to switch to Video mode.
2. Touch
to select the front or rear camera lens.
3. To zoom in or out, drag
toward
4. If you want to adjust settings, touch
or
Flash mode
(rear camera only)
Return
White balance
Time lapse interval
Advanced settings
Video quality
5. To start shooting the video, touch
The elapsed time shows at the corner.
6. To stop, touch
7. An image from your most recent video is displayed as a thumbnail at the corner.
You can touch the thumbnail to view the video.
The file is saved to the internal storage of your device.
26
Chapter 5
Getac Applications
This chapter describes the applications added by Getac for special features of your
device.
Barcode Utility and Configuration
(Select Models Only)
Barcode Utility
Barcode Utility is a demo application that can read barcodes of common 1D and
2D symbologies.
NOTE: For enhanced applications and customization of the barcode
reader, contact your authorized Getac dealer.
1.
To configure barcode options, use Barcode Config as described in the next section.
2. Open the Barcode Utility application.
3. To scan one barcode at a time, touch Trigger. Or, press the Fn button on
your device. (The button is defined as Trigger by default.)
To scan continuously, touch Continuous.
27
4. Aim the green scan beam so that it is centered over the barcode. Adjust the
lens’ distance from the barcode, shorter for a smaller barcode and farther for
a larger one.
Trigger button
NOTE: Improper ambient light and scanning angle can affect the
scanning results.
5. Upon a successful scan, the system beeps and the scan beam turns off. The
decoded barcode data will be entered.
If you are in continuous scanning mode, the scan beam turns back on again
for the next barcode. To stop scanning, touch Stop.
28
NOTE: The scan beam also turns off after timeout.
Barcode Config
Barcode Config allows you to configure options specific to individual barcode
symbologies.
1.
Open the Barcode Config application.
2. Touch the name of a symbology to configure. You can enable or disable the
individual symbology and configure the options as needed.
To restore default settings or enable all symbologies, touch Module.
29
File Manager
File Manager allows you to organize your data in the internal SD card and any
connected external storage (such as a microSD card or USB disk).
To exit, touch
 Exit.
Button Descriptions
Left side buttons:
Buttons
Descriptions
Home
Goes to the root directory.
Upper
Goes one level up to the parent directory.
Multi-Select
Enables or disables multiple selections.
When enabled, you can touch multiple files or folders for one batch
operation. A set of buttons appear on the left side of the screen
for you to use.
Paste
Pastes what you have cut or copied to the current directory.
View
Switches between icon and list view.
Refresh
Refreshes the current directory.
30
Upper-right buttons:
Buttons
Descriptions
Search
Opens the Search box.
Add Folder
Adds a folder in the current directory.
Menu
Settings
Show all
files/directories
Check to show all files/directories.
Show image
thumbnail(s)
Check to have images shown as
thumbnails.
Display type
Sets the view to icon or list view.
Sort by
Specifies the sorting order.
Home directory
setting
Specifies a folder as the home directory
in File Manager.
Opening a File
When you touch a filename, File Manager tries to open or execute the file depending
on the file type.
NOTE: Not all files can be opened in this way.
31
GPSGPS-ECompass
GPS-ECompass can:
Function as a compass.
Receive GPS satellite signals to calculate the location of your device.
Record GPS logs.
When opening the application, you will be asked to turn on GPS if it is off. The
icon
in the status bar indicates GPS service is in use.
The application has three pages as described later. Touch one of the three buttons
(Satellite Position, Electronic Compass, and Location Information) at the left side
of the screen to see the page.
Satellite Position
The Satellite Position page shows the positions of the overhead satellites and their
signal strength. It also indicates the on/off status of the SBAS and logging functions.
SBAS (satellite-based augmentation system) provides additional accuracy and
reliability for the GPS devices. Ground stations are necessary to achieve the purpose.
The SBAS feature works where such stations exist. You can enable the SBAS feature.
(See “
32
Getac Settings” in Chapter 7.)
Electronic Compass
The Electronic Compass page shows directions of movement including orientation,
pitch angle, roll angle, and azimuth angle.
The Accuracy reading is for your reference. When the application determines that
calibration is needed, it will pop up the “Calibration” graphics asking you to calibrate
the compass. Hold the device and swing it in the way as shown on the screen.
Do this several times until the popup graphics disappear.
NOTE: Follow these guidelines when using the compass.
 Keep the device away from objects that generate magnetic
fields, such as cars, large belt buckles, computers, cell
phones, etc.
 If you must use the compass inside a car, the device should
be at least 20 cm (7.87 inches) away from metal objects such
as car doors, dashboard, air vents, etc.
 Avoid playing music with the internal speaker or connecting
the AC adapter. This will cause the magnetic interference
to the compass.
33
Location Information
The Location Information page shows the geographic information of the current location
once GPS positioning is completed.
Settings
Touch
and touch Setting.
Items
Descriptions
Location Service
Check GPS satellites to turn on GPS receiver.
Satellites Log
See the next subsection for information.
Rotation Type
Set to Needle Compass for a pivoting needle on a fixed dial
or Wheel Compass for a fixed needle on a rotating dial.
Display
Check Calibration to display the Accuracy reading on the
Electronic Compass screen.
Check Balance to display the Pitch/Roll reading on the
Electronic Compass screen.
Touch OK for the changes to take effect.
34
GPS Logging
You can record a GPS log file for the use of other applications. The output format
is NMEA.
1.
Touch
and touch Setting.
2. Touch Start to write Log in /storage/sdcard0/GpsLog.
3. In the selection menu that pops up, touch .. to accept the default folder for storing
the file.
If you want to specify a different folder, select it in the menu.
4. Touch OK. The recording will continue until you stop it.
5. To stop, touch
and touch Setting. Touch Stop to write Log in ….
6. Touch OK.
35
RFID Reader Utility (Select Models Only)
RFID Reader Utility is a demo application that reads UID numbers from RFID tags.
NOTE: For enhanced applications and customization of the RFID
reader, contact your authorized Getac dealer.
1.
Open the RFID Reader Utility application.
2. Touch the tag type you want to scan.
3. To scan one tag at a time, touch Scan. Or, press the Fn button on your device.
(The button is defined as Trigger by default.)
To scan continuously, touch Continuous.
4. Bring the tag near the RFID antenna.
36
Location of
internal RFID
antenna
5. If a tag of the matching type is found, its UID is displayed in the data area.
6. If you are in continuous scanning mode, touch Stop to stop scanning.
7. You can touch Clear to clear the data area.
GU1000 UHF RFID Reader (Select Models
Only)
GU1000 is a utility that reads ultra high frequency RFID tags.
37
38
Chapter 6
Managing Your Device
This chapter tells you how to manage power and configure your device.
Managing Power
The operating time of a fully charged battery depends on how you are using the
device. Some functions, such as using multimedia or operating an SD card, may
consume the battery power considerably.
Low Battery Signals and Actions
CAUTION: When you recharge the battery upon a warning of low
power, you should charge for at least 30 minutes. If you unplug
the AC adapter soon, you may not have sufficient battery power
for your operation.
The battery status (charging or discharging) and level (as a percentage of fully
charged) are displayed at the top of the screen. To check the battery information,
go to Settings  Battery.
Battery
You should save your data and recharge the battery immediately upon a warning
of low power; otherwise your device will turn off automatically. You need to connect
the device to external AC power for charging before you can use it again.
39
PowerPower-Saving Tips
You can extend your battery’s life between charges by turning off features that you
don’t need. You can also monitor how applications and system resources consume
battery power.
Turn off radios that you aren’t using.
Lower the screen brightness and set a shorter screen timeout.
Lower the volume.
If you don’t need it, turn off automatic syncing for all applications.
Avoid power-consuming applications. To check which applications consume the
most battery power, go to the Home screen, go to Settings  Battery.
Battery
40
Settings
NOTE:
 Incorrect settings may cause your system to malfunction. Make
sure that you fully understand the function of a certain item
before any adjustment.
 Some setting items are available only for specific models
or applications you have in your device.
The Settings application contains most of the tools for customizing and configuring
your device.
To open Settings, use any of the below methods:
Tap the Settings icon in the Home screen.
Touch
Open Quick Settings and touch the Settings icon
(on the Home screen)  Settings.
Settings
Wireless and Networks
Networks Settings
Item
Description
Wi-Fi
To configure and use Wi-Fi.
Bluetooth
To configure and use Bluetooth.
Data usage
To view the amount of data uploaded or downloaded by your
device during a given period. You can set up conditions for
data usage.
More…
Airplane mode
Slide the switch to the on position to turns off all wireless
radios.
Tethering &
To share your device’s mobile data connection via USB or
portable hotspot as a portable Wi-Fi hotspot.
41
VPN
To set the type of VPN to add and view the list of VPNs
that you’ve previously configured.
Ethernet
To configure Ethernet settings.
Item
Description
Cellular
networks
To set up conditions for your device's connections with mobile
data networks.
Mobile plan
To view your mobile plan.
Device Settings
Item
Display
Description
To set brightness, wallpaper, sleep timeout, auto rotate, font
size, etc.
Sound & notification To configure sound-related settings such as volume, phone
ringtone, vibration with ringing, notification sound, etc.
Storage
To view the used and available space on your device’s storage.
Battery
To view battery usage data.
Apps
To view details about the applications installed on your device
and to manage them.
Users
To add, change, or delete users.
Dock
To set if you want to use the external antenna of the dock
(when connected). You can also enable the auto switch
function.
To specify which audio output to use when docked.
Check to enable the sound that indicates your device is inserted
to or removed from the dock.
Getac settings
See below.
42
Getac Settings
Item
Description
Sensors status
To view sensors data.
Physical buttons
To assign a function or application to a hardware button
on your device.
Modem config
To configure the modem settings (if connected).
Common Criteria
To toggle Common Criteria on/off.
“Common Criteria” is an international standard
(ISO/IEC 15408), which define a common framework for
evaluating security features and capabilities of Information
Technology security products.
Barcode
To toggle the barcode reader on/off.
To enable/disable barcode scan.
Fingerprint
To enable/disable the fingerprint scanner.
Global Navigation
Satellite System
To toggle the below functions on/off.
• GPS
• GLONASS
• SBAS
Personal Settings
Item
Description
Location
To configure how you want your device to determine your
location and how you want to share your location with Google
and others.
Security
To configure screen lock, power-on password, device
administration, and credential storage.
43
Accounts
To add accounts.
The screen lists the account(s) you have added to the device.
To manage an account, touch it.
Item
Description
Language & input
To set up display language, personal dictionary, keyboard
language, input method, voice search, and text-to-speech
output.
Backup & reset
To back up data and settings and to reset to factory default
state.
System Settings
Item
Date & time
Description
To use automatic data and time or to enter manually
To choose data and time format.
Accessibility
To modify your device's accessibility settings
Printing
To add printing services to your device and to manage service
settings.
Developer options
To set up options for developers.
About tablet
To upgrade your device’s firmware.
To update the system.
To view legal, hardware, and software information of your
device.
44
Chapter 7
Care and Maintenance
This chapter provides guidelines on taking care of your device.
Resetting Your Device
To restart the device, press and hold the power button until a menu pops up. Touch
Power off and then Reboot.
Reboot
In case the device stops responding to your operation, you can force the device
to power off by pressing and holding the power button for more than 10 seconds.
Then turn it on again.
Caring for Your Device
Taking good care of your device will ensure trouble-free operation and reduce the
risk of damage to your device.
Keep your device away from excessive moisture and extreme temperatures.
Avoid exposing your device to direct sunlight or strong ultraviolet light for extended
periods of time.
Do not place anything on top of your device or drop objects on your device.
Do not drop your device or subject it to severe shock.
Do not subject your device to sudden and severe temperature changes. This
could cause moisture condensation inside the unit, which could damage your
45
device. In the event of moisture condensation, allow your device to dry out
completely before use.
The screen surface can easily be scratched. Avoid touching it with sharp objects.
Non-adhesive generic screen protectors designed specifically for use on portable
devices with LCD panels may be used to help protect the screen from minor
scratches.
Never clean your device with it powered on. Use a soft, lint-free cloth to wipe
the screen and the exterior of your device.
Do not use paper towels to clean the screen.
Never attempt to disassemble, repair or make any modifications to your device.
Disassembly, modification or any attempt at repair could cause damage to your
device and even bodily injury or property damage and will void the warranty.
Do not store or carry flammable liquids, gases or explosive materials in the
same compartment as your device, its parts or accessories.
46
Chapter 8
Regulatory Information
NOTE: Marking labels located on the exterior of your device
indicate the regulations that your model complies with. Please
check the marking labels on your device and refer to the
corresponding statements in this chapter. Some notices apply
to specific models only.
Regulations Statements
USA Class B Regulations
Federal Communications Commission Radio Frequency Interference Statement
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
47

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
Please note:
The use of a non-shielded interface cable with this equipment is prohibited.
Industry Canada statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes:
1) l'appareil ne doit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter, except tested built-in radios.
Cet appareil et son antenne ne doivent pas être situés ou fonctionner en
conjonction avec une autre antenne ou un autre émetteur, exception faites des
radios intégrées qui ont été testées.
48

The County Code Selection feature is disabled for products marketed in the
US/ Canada.
La fonction de sélection de l'indicatif du pays est désactivée pour les produits
commercialisés aux États-Unis et au Canada.
FOR PORTABLE DEVICE (<20cm from body / SAR needed)
Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in this
manual. The further RF exposure reduction can be achieved if the product can be
kept as far as possible from the user body or set the device to lower output power
if such function is available.
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour
les Etats-Unis et le Canada établies pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction
aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin
que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance
de sortie la plus faible si une telle fonction est disponible.
FOR WLAN 5GHZ DEVICE:
Caution :
1)
2)
3)
the device for operation in the band 5150-5250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile satellite
systems;
the maximum antenna gain permitted for devices in the bands 5250-5350
MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
the maximum antenna gain permitted for devices in the band 5725-5825 MHz
shall comply with the e.i.r.p. limits specified for point-to-point and non
point-to-point operation as appropriate.
49
4) the worst-case tilt angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3)
shall be clearly indicated.
5) Users should also be advised that high-power radars are allocated as primary
users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850
MHz and that these radars could cause interference and/or damage to LE-LAN
devices.
Avertissement:
1)
2)
3)
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes
canaux;
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes
5250-5350 MHz
et 5470-5725 MHz doit se conformer à la limite de p.i.r.e.;
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande
5725-5825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour
l’exploitation point à point et non point à point, selon le cas.
4) les pires angles d’inclinaison nécessaires pour rester conforme à
l’exigence de la p.i.r.e. applicable au masque d’élévation, et énoncée
à la section 6.2.2 3), doivent être clairement indiqués.
5) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars
de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont
la priorité) pour les bandes 5250-5350 MHz
et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou
des dommages aux dispositifs LAN-EL.
50
European Union CE Marking and Compliance
Notices
Statements of Compliance
English
This product follows the provisions of the European Directive 1999/5/EC.
Danish
Dette produkt er i overensstemmelse med det europæiske direktiv 1999/5/EC.
Dutch
Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC.
Finnish
Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä.
French
Ce produit est conforme aux exigences de la Directive Européenne 1999/5/EC.
German
Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 1999/5/EC.
Greek
To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC.
Icelandic
Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC.
Italian
Questo prodotto è conforme alla Direttiva Europea 1999/5/EC.
Norwegian
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
Portuguese
Este produto cumpre com as normas da Diretiva Européia 1999/5/EC.
Spanish
Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
51
Swedish
Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC.
Restrictions
This device is restricted to indoor use when operating in the 5150 to 5350 MHz
frequency range.
Safety Precautions
Prolonged listening of music in maximum volume can damage the ears.
The use of headphones other than those recommended/supplied can cause
hearing impairment due to excessive sound pressure.
Caution for service personnel: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the instructions.
About Charging
Use only the AC adapter supplied with your device. Use of another type of
AC adapter will result in malfunction and/or danger.
Use only the car charger supplied by the manufacturer. Use of another type
of car charger will result in malfunction and/or danger.
This product is intended to be supplied by a LISTED Power Unit marked with
“LPS,” “Limited Power Source,” and output rated + 12 V dc / 2.0 A.
Use a specified cradle approved by the manufacturer.
Use a specified battery in the equipment.
About the AC Adapter
Do not use the AC adapter in a high moisture environment. Never touch the
AC adapter when your hands or feet are wet.
52

Allow adequate ventilation around the AC adapter when using it to operate the
device or charge the battery. Do not cover the AC adapter with paper or other
objects that will reduce cooling. Do not use the AC adapter while it is inside
a carrying case.
Connect the AC adapter to a proper power source. The voltage and grounding
requirements are found on the product case and/or packaging.
Do not use the AC adapter if the cord becomes damaged.
Do not attempt to service the unit. There are no serviceable parts inside. Replace
the unit if it is damaged or exposed to excess moisture.
53

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : FREE PDFill PDF and Image Writer
Modify Date                     : 2016:11:23 15:32:07+08:00
Create Date                     : 2016:11:17 12:43:44+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:11:23 15:32:07+08:00
Document ID                     : eb63d5ea-aedb-11e6-0000-2ac94f70cbdc
Instance ID                     : uuid:f684da20-f8ab-4817-9534-451add36a3b9
Format                          : application/pdf
Title                           : Microsoft Word - ZX70 English Manual_add IC terms
Creator                         : celina.chen
Page Count                      : 59
Author                          : celina.chen

EXIF Metadata provided by EXIF.tools