Getac Technology ENERGY Bluetooth EDGE Wireless Modem User Manual Energy Getac QSG 1207V2

Download:
Mirror Download [FCC.gov]
Document ID	1210203
Application ID	uGdUv45t/vHR9wgIqcARAg==
Document Description	Users Manual Rev2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.29kB (241184 bits)
Date Submitted	2009-12-07 00:00:00
Date Available	2009-12-08 00:00:00
Creation Date	2009-12-07 17:43:38
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-12-07 17:43:38
Document Title	Microsoft Word - Energy Getac QSG_1207V2.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	celina.chen

Bluetooth EDGE Wireless Modem
REFERENCE GUIDE
1.
2.
Overview
Congratulations and thank you for purchasing the Bluetooth
EDGE Wireless Modem.(Brand:Getac;Model:Energy )
This guide provides instructions on using the modem with
Windows Mobile 5.0/6.1 devices and Windows XP/Vista
computers.
Hardware Setup
1. Loosen the bottom screw (n)
with a screwdriver and slide the
battery cover outward (o) to
detach it from the modem.
CAUTION: The modem does not
support PIN codes of SIM cards.
If a PIN code has been set, disable
the PIN code before installing the
SIM card.
Packing List
Modem
Battery
2. Note the orientation of the
SIM card and insert the card
into the SIM card slot.
3. Note the orientation of the
batteryand fit it into the
compartment.
AC adapter
External antenna
Frequency Bands
Quad‐band EGSM/GPRS/EGPRS
900/1800/850/1900 MHz
Bluetooth Profile
Serial Port Profile (SPP)
Dial‐up Networking Profile (DUN)
Application
Data transmission
OS Support
Windows Mobile 5.0/6.0
Windows XP/Vista
Power
Rechargeable 3.7 volt 2400mAh
Li‐ion battery pack
Power jack for 5V power supply
3.
Software Setup – Windows Mobile 5.0/6.1
NOTE: Windows Mobile 5.0 screens are used in this section as
examples.
Network Connection and Disconnection
EasySetup Installation
Once the shortcut has been created as described before, you
can connect to the mobile network through the modem at
any time.
A program called EasySetup helps you set up Windows Mobile
5.0/6.1 devices for using the modem. Please contact your dealer
or Getac to obtain the file named EasySetupInstaller.CAB.
1. On your Windows Mobile device, turn on the Bluetooth
function and set it to “visible.”
To install EasySetup, execute the file EasySetupInstaller.CAB.
Then, follow the onscreen instructions to complete the
installation.
2. Power on the modem.
Bluetooth Pairing and Dial-up Settings
4. In the “Logon to Server” screen, enter the information
provided by your mobile operator. Do not disable the
Save password item. Then tap OK.
1. On your Windows Mobile device, turn on the Bluetooth
function and set it to “visible.”
3. To connect, tap the EasySetup shortcut icon
Connect.
and tap
2. Press the power button of the modem for at least 3 seconds.
This will prepare the modem for Bluetooth pairing.
3. Tap Start Æ Programs Æ EasySetup.
4. Replace the battery cover and
tighten the screw.
Specifications
Rugged Mobile Computing Solutions
5. Locate the power connector of the
modem by opening the rubber
cover. Connect one end of the
AC adapter into the
power connector (n)
and the other end
into an electrical
outlet (o).
This charges the
battery pack.
4. EasySetup will try to pair with the modem. When the pairing
is completed, a message appears to inform you.
5. EasySetup will acquire the mobile operator’s data from the
SIM card and list the dial‐up number(s) for you to select.
Select the correct number and tap OK.
5. When mobile network connection is completed, a
message appears to inform you. The Windows Mobile
device can now access the Internet through the modem.
6. To disconnect, tap the EasySetup shortcut icon
tap Disconnect.
and
Indicators
Power
Off
Power off
Green
Power on
Red
Power on with low battery
Orange
Battery charging in progress
Red Flash Twice
No battery or critically low battery
Red Flash
Error in charging
Red/Green Flash
Bluetooth pair mode
6. An external antenna is provided for
better signal reception in a car.
Locate the antenna connector of the
modem by opening the rubber cover.
Connect one end of the antenna into
the antenna connector and attach
the other end to the highest possible
position.
GSM/GPRS
Off
GSM off
Green Flash
Ready, idle, or data transfer in progress
Green
Data call in progress
Bluetooth
Off
Bluetooth off
Blue
Ready to be paired
Blue Slow Flash
Active Bluetooth connection
7. Turn on the modem by pressing
the power button.
6. The EasySetup shortcut icon
right corner of the screen.
appears at the bottom
7. If there is a need to stop the program so it will not occupy
the system memory, tap the EasySetup shortcut icon
and tap Exit.
NOTE: If you change the SIM card, you have to recreate the
shortcut overwriting the previous one.
4.
5.
Software Setup – Windows XP/Vista
Regulatory Statements and Safety Precautions
NOTE: Windows Vista screens are used in this section as
examples.
Network Connection and Disconnection
European Notice
EasySetup Installation
Once the shortcut has been created as described before, you
can connect to the mobile network through the modem at any
time.
A program called EasySetup helps you set up Windows
XP/Vista computers for using the modem. Please contact your
dealer or Getac to obtain the file named
EasySetupInstaller.msi.
1. On your computer, turn on the Bluetooth function and set it
to “visible.”
Products with the CE marking comply with Radio &
Telecommunication Terminal Equipment Directive (R&TTE)
(1999/5/EEC), the Electromagnetic Compatibility Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) – as
amended by Directive 93/68/ECC – issued by the Commission of
the European Community.
To install EasySetup:
1. Execute the file EasySetupInstaller.msi.
2. Power on the modem.
3. To connect, click the EasySetup shortcut icon
Dial-up.
and click
2. In the setup wizard screen, click Next.
3. When the installation is completed, click Close.
Bluetooth Pairing and Dial-up Settings
NOTE: EasySetup is designed for the Windows’ built‐in
Bluetooth driver only. If your computer comes with a
third‐party Bluetooth driver, you have to use its specific
Bluetooth utility to pair the computer with the modem.
(Check the documentation of your computer to know how to
perform the Bluetooth pairing procedure.) While pairing, the
passkey 0000 is required. After the manual pairing, you can
use EasySetup for dial‐up settings.
4. When mobile network connection is completed, the “ON
LINE…” message appears. Your computer can now access
the Internet through the modem.
5. To disconnect, click the EasySetup icon and click Disconnect.
1. On your computer, turn on the Bluetooth function and set
it to “visible.”
6. If there is a need to stop the program so it will not occupy the
system memory, click the EasySetup shortcut icon
and
click Exit.
2. Press the power button of the modem for at least 3
seconds. This will prepare the modem for Bluetooth
pairing.
NOTE: If you change the SIM card, you have to recreate the
shortcut overwriting the previous one.
3. From Windows desktop, click Start Æ EasySetup.
EasySetup will automatically pair with the Bluetooth
modem.
4. EasySetup will acquire the mobile operator’s data from the
SIM card and list the dial‐up number(s) for you to select.
Select the correct number and click OK.
Compliance with these directives implies conformity to the
following European Standards:
EN301489-1: Electronic compatibility and Radio spectrum
Matters (ERM), ElectroMagnetic Compatibility (EMC) standard
for radio equipment and services; Part 1: Common technical
requirements
EN301489-17: Electronic compatibility and Radio spectrum
Matters (ERM), ElectroMagnetic Compatibility (EMC) standard
for radio equipment and services; Part 17: Specific conditions
for 2.4 GHz wideband transmission systems and 5 GHz high
performance RLAN equipment
EN55022: Radio disturbance characteristics
EN55024: Immunity characteristics
EN6100-3-2: Limits for harmonic current emissions
EN6100-3-3: Limitation of voltage fluctuation and flicker in
low‐voltage supply system
EN62311: Product Safety
Do not use the AC adapter in a high moisture
environment. Never touch the AC adapter when your
hands or feet are wet.
Allow adequate ventilation around the AC adapter when
using it to operate the device or charge the battery. Do
not cover the AC adapter with paper or other objects
that will reduce cooling. Do not use the AC adapter while
it is inside a carrying case.
Connect the AC adapter to a proper power source. The
voltage and grounding requirements are found on the
product case and/or packaging.
Do not use the AC adapter if the cord becomes
damaged.
Do not attempt to service the unit. There are no
serviceable parts inside. Replace the unit if it is damaged
or exposed to excess moisture.
Use a specified AC adapter approved by the
manufacturer.
Do not mutilate, puncture, or dispose of battery in fire.
The battery can burst or explode, releasing hazardous
chemicals.
Important instructions
Caution: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.
Replace only with the same or equivalent type
recommended by the manufacturer.
The battery must be recycled or disposed of properly.
Use the battery only in the specified equipment.
The manufacturer cannot be held responsible for modifications
made by the User and the consequences thereof, which may
alter the conformity of the product with the CE Marking.
USA FCC (Federal Communications Commission) Radio
Frequency Interference Statement
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
RF Exposure (SAR) Warning
This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment, under
47 CFR 2.1093 paragraph (d)(2).
End users must follow the specific operation instruction
for satisfying RF exposure compliance.
This transmitter must not be co‐located or operating in
conjunction with any other antenna or transmitter
except those that are described within this filing.
The measured SAR levels evaluated are in compliance
with the FCC RF exposure guidelines.
The maximum reported Body Maximum SAR
Measurement (1g) value is: 1.198 W/Kg.
Safety Precautions
5. The EasySetup shortcut icon
taskbar.
appears in the Windows
Use only the AC adapter supplied with your device. Use of
another type of AC adapter will result in malfunction and/or
danger.
This product is intended to be supplied by a LISTED Power
Unit marked with “LPS,” “Limited Power Source,” and
output rated + 5 V dc / 2.2 A.
Use a specified battery in the equipment.
5 6 1 5 8 2 6 0 0 0 0 1 R 0 0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:12:07 17:43:38+08:00
Create Date                     : 2009:12:07 17:43:38+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Energy Getac QSG_1207V2.doc
Creator                         : celina.chen
Document ID                     : uuid:ecea792d-7b9c-4df7-aaf6-ac4de050ddb7
Instance ID                     : uuid:d5aed212-9deb-4e26-8673-75c76d0f1c19
Page Count                      : 2
Author                          : celina.chen

EXIF Metadata provided by EXIF.tools