Getac Technology PN7462R RFID module User Manual GENERAL DESCRIPTION

Getac Technology Corporation RFID module GENERAL DESCRIPTION

UserManual.wiki >

Getac Technology >

PN7462R User Manual >

User Manual Module

Contents

1. User Manual Host
2. User Manual Module

User Manual Module

InfoThink Technology CO., LTD. 5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.) TEL：(02)2790-1790 FAX：(02)2790-1770 3 Index NO. ITEN PAGE 1. General Description 4 2. Features 4 3. Support the following memory card interfaces 4 4. System requirements 4 5. General Specifications 5 6. Pinouts 5 7. Dimension 5 8. Block Diagram 6 9. RX10 NFC Reader Photograph 6

InfoThink Technology CO., LTD. 5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.) TEL：(02)2790-1790 FAX：(02)2790-1770 4 1. General Description The RX10 NFC module is a highly integrated transceiver module for contactless reader/writer communication at 13.56 MHz. A dedicated Flash code is implemented to handle different RF protocols by an integrated microcontroller. The system host controller communicates with the RX10 NFC module by using the USB link. The protocol between the host controller and the RX10 NFC module, on top of this physical link is the CCID protocol 2. Features  High RF output power frontend IC for transfer speed up to 848 kbit/s  NFC IP1 and NFC IP2 support  Full NFC tag support (type 1, type 2, type 3, type 4A and type 4B)  P2P active and passive, target and initiator  Card emulation ISO14443 type A  ISO/IEC 14443 type A and type B  MIFARE classic card  ISO/IEC 15693, and ISO/IEC 18000-3 mode 3  Low power card detection  Dynamic Power Control (DPC) support  Compliance with EMV contactless protocol specification  Compliance with NFC standards 3. Support the following operating modes:  ISO/IEC 14443-A and B, MIFARE  JIS X 6319-4 (comparable with FeliCa scheme)  ISO/IEC 15693, ICODE, ISO/IEC 18000-3 mode 3  NFC protocols - tag reader/writer, P2P  ISO/IEC 14443- type A card emulation  EMVCo compliance 4. System Requirements  Desktop or notebook computer with a working USB port  One of the following Operating Systems： – Windows® 2000 – Windows® 2003 Server x32/x64 – Windows® 2008 Server x32/x64 – Windows Vista™ x32/x64 – Windows® 7 x32/x64 – Windows® 10 x32/x64

InfoThink Technology CO., LTD. 5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.) TEL：(02)2790-1790 FAX：(02)2790-1770 5  Support by the following OS through the PCSC-Lite driver： – GNU/Linux using libusb 1.0.x and later – Mac OS Leopard (1.5.6 and newer) – Mac OS Snow Leopard (1.6.X) – Solaris – FreeBSD 5. General Specifications  Bus-powered - +5V +/- 5%, 500mA  Average Power Consumption - Standby Mode: 0.12Watt - Active/Read Card Mode: 0.24 Watt  Operational environment – Operating Temperature: -10°~60° – Operating Humidity: 10%~90% – Storage Temperature: -20°~70° – Storage Humidity: 10%~90% 6. FFC Pin List CN2 - Mainly USB Signals CN1 - Mainly Interface of LSM303D Pin No. Pin Name Input/Output Pin No. Pin Name Input/Output 1 GND POWER 1 GND POWER 2 OPTION_BAYID_RFID I/O 2 ACC_1_INT2 OUTPUT 3 RFID_PWRON INPUT 3 ACC_1_INT1 OUTPUT 4 USB DM USB SIGNAL 4 I2C1_SDA I/O 5 USB DP USB SIGNAL 5 I2C1_SCL INPUT 6 GND POWER 6 +3.3S_DK POWER INPUT 7 +V3.3S_DK POWER INPUT 8 +V5S_DK_R POWER INPUT

InfoThink Technology CO., LTD. 5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.) TEL：(02)2790-1790 FAX：(02)2790-1770 6 7. PCBA Dimension 55.5 x 45.5 x 3.5 mm

InfoThink Technology CO., LTD. 5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.) TEL：(02)2790-1790 FAX：(02)2790-1770 7 8. USB Device VID/PID and Firmware Version VID/PID: 0x1FC9/0x0117 F/W Ver.: 1.01 9. Block Diagram 10. RX10 NFC module Photograph USB Host RFID PN7462 ANT Host LSM303D

Navigation menu