Giant Electronics D301 Model D301 User Manual 070608 1 mobilePhoneTools OperationalInstruction

Giant Electronics Ltd Model D301 070608 1 mobilePhoneTools OperationalInstruction

Contents

manual

Getting started
Installing mobile PhoneTools ( mPT )
*** DON’T connect your device to the PC/Notebook until the
installation wizard instructs you to do. ***
Installing (U)SIM card
Starting the installation
To install mPT, insert the CD-ROM containing the program in the appropriate
drive. When installing mPT from the CD-ROM, the installation program
starts automatically.
If the installation program fails to start automatically, execute the following
instructions:
- From the Start menu, select the Run command. Select the CD-ROM drive or
type d:\start.exe ( where D: is the CD-ROM drive ). Run the file Setup.exe in
order to start the installation.
Installation Wizard
An InstallShield Wizard will guide you step-by-step through the installation
process, prompting for information where needed. During the installation
procedure, a program group is created. This group contains the icons of the
mPT application and will be accessible from the Start menu. The Setup
Complete window will appear when installation is completed.
Let the Device Setup completes the device detection, then the following will
be displayed
Now you can connect the device with the PC/Notebook.
A progressing window (below) will be displayed until completion.
A connection between the device and the computer is created and the mPT
main window is displayed.
Uninstalling mobile PhoneTools
a. In the Windows taskbar, click the Start menu and select Control Panel. In
the Control Panel window, double-click the Add or Remove programs option.
b. Highlight the mobile PhoneTools program and, depending on your OS,
click the Modify/Delete or Change/Remove button.
c. The uninstallation procedure begins and the program will be removed.
Mobile PhoneTools main window
Once your device is connected to your computer, the following operations
can be performed easily:
Send and receive e-mail
SMS messaging,
Get (U)SIM information
Launch an Internet session
Menu
Menu tree
Right-hand-side icons
E
-
mail
SMS
(U)SIM information
Help
Menu
LED Indication in USB Modem hardware
1. LED turns off: No power supply to device,
2. Green LED keeps lighting up: Searching network, or waiting PIN input,
3. Green LED flashes slowly: clamp on EDGE/GPRS/GSM network, but
still not access data service,
4. Green LED flashes fast: Accessing data service under
EDGE/GPRS/GSM service ( e.g. downloading, browsing, video
streaming,… ),
5. Blue LED flashes slowly: clamp on 3G/3.5G network but still not access
data service.
6. Blue LED flashes fast: Accessing data service under 3G/3.5G ( e.g.
downloading, browsing, video streaming,… ),
7. Red LED keeps lighting up: No SIM,
8. Red LED flashes fast: SIM error/All other errors
Copyrights
© Avanquest Software 2001-07. All rights reserved.
Trademarks
All product names mentioned in this document are trademarks or registered
trademarks of their respective owners.
Statement
Music or other audio works, whether originating from CD's, MP-3's or some
other source, ("Music Materials") may be protected under copyright law.
Unauthorized copying of copyrighted works may be contrary to the
provisions of the copyright laws of the United States and other countries. It is
your responsibility, not Mobile's, to ensure that your use of PC Suit software
and/or Devices to copy, edit, play or otherwise use any Music Materials does
not violate the copyright laws. You are responsible for obtaining any
necessary permission and paying any necessary licensing fees for the Music
Materials or other materials you choose to copy, edit, play or otherwise use. A
violation of copyright laws could result in a civil or criminal claim brought
against you, even if you do not receive any money or other commercial
benefit from your copying or other use of the material. This software should
only be used for your personal, noncommercial purposes.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE Marking
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
For questions regarding your product or this FCC declaration, contact:
Giant International Ltd.
3500 Lenox Road, Suite 630
Atlanta GA 30326
Office: +1 678 904 6077
Fax: +1 678 904 6030
0682
Email :
mdegroot@giantintl.com
To identify this product, refer to the Part, Series, or Model number found
on the product.
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Giant Electronics Limited may void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by 1 or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio or television technician
for help
This product emits radio frequency energy but it has been tested for FCC
RF for body SAR compliance with the provided USB cable for use close
to the body, While there may be differences between the SAR levels of
various devices and at various positions, they all meet the government
requirement for RF exposure provided that it is used with a USB cable
that ensures a minimum distance of 1.5 cm from the human body. Use of
other accessories may not ensure compliance with FCC RF exposure
guidelines.
The product must be installed to provide a separation distance of at least
1.5 cm from all the persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
Nevertheless, the device should be used in such a manner that the
potential for human contact with the antenna during normal operation is
minimized.

Navigation menu