Giant Electronics T5720 Transmitter Portion of GMRS + FRS User Manual 1042b60o

Giant Electronics Ltd Transmitter Portion of GMRS + FRS 1042b60o

User Manual

T5600, T5620, T5700, T5710, T5720Preliminary User Guide10/28/2002
Introduction1PreliminaryIntroductionCongratulations on your purchase of a Motorola Product!Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your Motorola product require an update of other service. Registration is not required for warranty coverage. To register your product on-line, visit www.motorola.com/warranty/radios.Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status.For a copy of a large-print version of this guide, or for product-related questions, call:1-800-353-2729 in the USA1-888-390-6456 TTY (Text Telephone)On the web, please refer to www.motorola.com/talkabout1042b60o.book  Page 1  Monday, October 28, 2002  5:03 PM
PreliminaryIntroduction  . . . . . . . . . . . . . . . . . . . . . . .1Safety and General Information  . . . . . . .3Battery Charger Safety Instructions  . . . . 9Control Buttons - T5600, T5700  . . . . . .11Control Buttons - T5620, T5710, T5720  12Getting Started . . . . . . . . . . . . . . . . . . . .13Installing the Batteries   . . . . . . . . . . . . .13Charging Desk Stand (Optional Accessory)   . . . . . . . . . . . .15Turning Your Radio On and Off   . . . . . .16Setting the Volume  . . . . . . . . . . . . . . . .17Setting a Channel  . . . . . . . . . . . . . . . . .17Talking and Listening  . . . . . . . . . . . . . .18Monitor Button   . . . . . . . . . . . . . . . . . . .18Talk Range  . . . . . . . . . . . . . . . . . . . . . .19Radio Etiquette  . . . . . . . . . . . . . . . . . . .19Special Features   . . . . . . . . . . . . . . . . . .20Interference Eliminator Code   . . . . . . . .20Timeout Timer . . . . . . . . . . . . . . . . . . . .21Keypad Lock  . . . . . . . . . . . . . . . . . . . . .21Scan (T5620, T5700, T5710 Only)  . . . .21Scan Advance . . . . . . . . . . . . . . . . . . . .22Nuisance Delete  . . . . . . . . . . . . . . . . . .22Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Channel Busy Indicator . . . . . . . . . . . . .23Call Tone . . . . . . . . . . . . . . . . . . . . . . . .23Roger Beep/Talk Confirmation Tone . . .23QuieT6000™ (T5700, T5710, T5720 Only)   . . . . . .24Accessories  . . . . . . . . . . . . . . . . . . . . . .26To Use Audio Accessories  . . . . . . . . . .26Hands-Free Use/Voice Activation (VOX) with Compatible VOX Accessories (T5710, T5720 Only) . . . . . . . . . . . . .27Belt Clip (Included)  . . . . . . . . . . . . . . . .29Troubleshooting . . . . . . . . . . . . . . . . . . .30Use and Care   . . . . . . . . . . . . . . . . . . . . .32Motorola Limited Warranty  . . . . . . . . . .34Export Law Assurances   . . . . . . . . . . . .40Contents1042b60o.book  Page 2  Monday, October 28, 2002  5:03 PM
Safety and General Information3PreliminarySafety and General InformationImportant Information on Safe and Efficient OperationRead This Information Before Using Your RadioThe information provided in this document supersedes the general safety information contained in user guides published prior to July 2000.Transmit and Receive ProcedureYour two-way radio contains a transmitter and a receiver. To control your exposure and ensure compliance with the general population/uncontrolled environment exposure limits, always adhere to the following procedure: • Transmit no more than 50% of the time • To transmit (talk), push the Talk button• To receive calls, release the Talk buttonTransmitting 50% of the time, or less, is important because the radio generates measurable RF energy exposure only when transmitting (in terms of measuring standards compliance).Exposure to Radio Frequency EnergyYour Motorola radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J1042b60o.book  Page 3  Monday, October 28, 2002  5:03 PM
Safety and General Information4Preliminary• American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio Frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999• Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2001 (applicable to wireless phones only)• ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2002) “additional requirements for SMR, cellular, and PCS product certification.”To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures.Portable Radio Operation and EME ExposureAntenna CareUse only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations.DO NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects the effective range.1042b60o.book  Page 4  Monday, October 28, 2002  5:03 PM
Safety and General Information5PreliminaryTwo-Way Radio OperationWhen using your radio as a traditional two-way radio, hold the radio in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.Body-Worn OperationTo maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories, and are not using the radio held in the normal use position, ensure the radio and its antenna are at least one inch (2.5 cm) from your body when transmitting.Data OperationIf applicable, when using any data feature of the radio with or without an accessory cable, position the radio and its antenna at least one inch (2.5 cm) from the body.Approved AccessoriesFor a list of approved Motorola accessories visit our website at www.mot.com.Electromagnetic Interference/CompatibilityNote:Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.1042b60o.book  Page 5  Monday, October 28, 2002  5:03 PM
Safety and General Information6PreliminaryFacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions.Medical DevicesPacemakersThe Advanced Medical Technology Association recommends that a minimum separation of six inches (15 cm) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of the U.S. Food and Drug Administration.Persons with pacemakers should:• ALWAYS keep the radio more than six inches (15 cm) from their pacemaker when the radio is turned ON.• Not carry the radio in the breast pocket.• Use the ear opposite the pacemaker to minimize the potential for interference.• Turn the radio OFF immediately if you have any reason to suspect that interference is taking place.1042b60o.book  Page 6  Monday, October 28, 2002  5:03 PM
Safety and General Information7PreliminaryHearing AidsSome digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.Safety and General Use While DrivingCheck the laws and regulations on the use of radios in the area where you drive. Always obey them. When using your radio while driving, please:• Give full attention to driving and to the road.• Use hands-free operation, if available.• Pull off the road and park before making or answering a call if driving conditions so require.Operational WarningsFor Vehicles with an Air BagDo not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle.1042b60o.book  Page 7  Monday, October 28, 2002  5:03 PM
Safety and General Information8PreliminaryPotentially Explosive AtmospheresTurn off your radio prior to entering any area with a potentially explosive atmosphere, unless it is a radio type especially qualified for use in such areas as “Intrinsically Safe.” Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.Note:The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted.Blasting Caps and AreasTo avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.Operational CautionsAntennasDo not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.BatteriesAll batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. 1042b60o.book  Page 8  Monday, October 28, 2002  5:03 PM
Safety and General Information9PreliminaryThe conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.Battery Charger Safety InstructionsSave these Charger Instructions1. Do not expose the charger to rain or snow.2. Do not operate the charger if it has received a sharp blow, or has been dropped or damaged in any way.3. Do not disassemble the charger if it has received a sharp blow, or has been dropped or damaged in any way.4. Never alter the AC cord or plug provided with the unit. If plug will not fit the out-let, have proper outlet installed by a qualified electrician. An improper condition can result in a risk of electric shock.5. To reduce risk of damage to cord or plug, pull the plug rather than the cord when disconnecting charger from AC receptacle.6. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning.7. Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock, or personal injury.8. Make sure that the cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress.1042b60o.book  Page 9  Monday, October 28, 2002  5:03 PM
Safety and General Information10Preliminary9. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and/ or electric shock. If an extension cord must be used, make sure that:• The pins on the plug of the extension cord are the same number, size and shape as those on the plug of the charger,• The extension cord is properly wired and in good electrical condition, and • The cord size is 18 AWG for lengths up to 100 feet, and 16 AWG for lengths up to 150 feet.10. The supply cord of this charger cannot be replaced. If the cord is damaged, call Motorola Product Services at 1-800-353-2729 in the USA or 1-888-390-6456 TTY (Text Telephone).1042b60o.book  Page 10  Monday, October 28, 2002  5:03 PM
11FCC Licensing InformationFCC Licensing InformationYour Motorola radio operates on General Mobile Radio Service (GMRS) frequencies and is subject to the Rules and Regulations of the Federal Communications Commission (FCC). The FCC requires that all operators using General Mobile Radio Service (GMRS) frequencies obtain a radio license before operating their equipment. To obtain the FCC forms please request Forms 605 and 159 which includes all forms and instructions. If you wish to have the document faxed, mailed or have questions, please use the following contact information.  Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules.Note:  Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.FaxedContact the Fax-On-Demand system at: Mailed Call the FCC forms hotline at:QuestionsRegarding FCC licenseContact the FCC at:1-202-418-0177 1-800-418-FORM1-800-418-36761-888-CALL-FCC 1-888-225-5322Or: http://www.fcc.gov6864110r06b.book  Page 11  Thursday, October 17, 2002  12:27 PM
11Control Buttons - T5600, T5700PreliminaryControl Buttons - T5600, T5700Use P to:• Turn power on/off• Adjust volumeUse M to: • Talk• Save a settingUse ‰ to: • Transmit call tone Use \ to:• Lock the keypad (when held down and not in a menu)• Exit the menu (when pressed while in a menu)LED Indicator LightDisplayAccessory JackUse Q to: • Monitor channel activityUse [ ]to:• Scroll through menusMicrophoneSpeaker1042b60o.book  Page 11  Monday, October 28, 2002  5:03 PM
12PreliminaryControl Buttons - T5620, T5710, T5720Control Buttons - T5620, T5710, T5720Use P to:• Turn power on/off• Adjust volumeLED Indicator LightUse M to: • Talk on the radio• Save a settingUse ^ to: • Transmit call toneRemovable Front Cover SpeakerUse \ to:• Lock the keypad (when held down and not in a menu)• Exit the menu (when pressed while in a menu)Accessory Jack CoverUse Q(T5320 and T5420) or J(T5410) to: • Monitor Channel ActivityUse [ ]to:• Scroll through menusMicrophone1042b60o.book  Page 12  Monday, October 28, 2002  5:03 PM
13Getting StartedPreliminaryGetting StartedInstalling the BatteriesYour radio uses 3 AA Alkaline batteries. The T5600, T5700, T5710, and T5720 model radios can also use a NiCd rechargeable battery. A rechargeable upgrade kit, model number 53614, is available for these radios. For the dealer nearest you, call 1-800-353-2729 (USA), or visit our website at: www.motorola.com/talkaboutAA Batteries1. With the back of the radio facing you, lift the battery latch up to release the battery cover.2.  Lift the cover off.3.  Insert 3 AA Alkaline batteries, making sure to insert the batteries to match the + and - polarity markings in the battery compartment.4.  Reposition the battery cover and press down to secure.NiCd BatteryDo not disassemble or unwrap the battery pack.1. Follow steps 1 and 2 above.2.  Remove the battery pack from the clear plastic bag.3.  Insert the NiCd battery pack as shown. The metal contacts on the side of the battery must be facing outwards from the radio to connect with the contacts on the battery door. 1042b60o.book  Page 13  Monday, October 28, 2002  5:03 PM
14PreliminaryGetting Started4.  Reposition the battery cover and press down to secure.Battery MeterThe battery meter in the upper left corner of the display indicates the battery level.The radio powers off when the voltage drops below a predetermined level to protect the rechargeable battery. When the battery meter is an empty shell (a), the radio chirps periodically after releasing M.Battery LifeThe following chart lists the appropriate battery life during typical two-way use* for AA Alkaline and NiCd batteries.*Two-way use is defined as 90% standby time, 5% talk time, and 5% receive time.Note:  Remove the batteries before storing your radio for extended periods of time. Batteries corrode over time and may cause permanent damage to your radio.Note:  When moving between hot and cold environments, do not charge the battery until the battery temperature acclimates (usually about 20 minutes).Battery Type Two-way Use*AA Alkaline 27 HoursNiCd 12 Hours1042b60o.book  Page 14  Monday, October 28, 2002  5:03 PM
15Getting StartedPreliminaryCharging Desk Stand (Optional Accessory)The charging desk stand provides drop-in charging convenience. The charging dock can be placed on any flat surface, such as a desk or workbench. Charge the NiCd battery overnight (at least 16 hours) before using it for the first time.1. With the radio off, remove the battery cover.2.  Remove the battery pack from the clear plastic bag.3.  Insert the battery pack as indicated on the battery pack label. The metal contacts on the side of the battery must be facing outwards from the radio to connect with the contacts on the battery door. Do not disassemble or unwrap the battery pack.4.  Replace the battery cover.5.  Plug the wire on the AC power supply into the plug on the desk stand.6.  Plug the AC power supply into a standard wall outlet.7.  Slide the radio into one of the desk stand charging pockets facing forward. The red light glows when the radio is properly inserted.After the initial battery charge, the battery is fully charged within 14 hours.To charge the battery pack separately from the radio:1. Remove the battery pack from the clear plastic bag.2.  Insert the battery pack into the desk stand charging pocket using the pocket insert provided. Do not disassemble or unwrap the battery pack.1042b60o.book  Page 15  Monday, October 28, 2002  5:03 PM
16PreliminaryGetting Started3.  Plug the wire on the AC power supply into the plug on the desk stand.4.  Plug the AC power supply into a standard wall outlet. The red light glows when the battery is properly inserted.After the initial battery charge, the battery is fully charged within 14 hours.Charging StatusThe solid red light indicator shows that the radio and/or the NiCd battery are charging.Note:  When moving between hot and cold environments, do not charge the battery until the battery temperature acclimates (usually about 20 minutes).Note:  For optimal battery life, remove the radio or battery from the charger within 16 hours. Do not store the radio in the charger.After the initial battery charge, when 2 depleted batteries are placed in the charger, they will be fully recharged within 14 hours. Turning Your Radio On and OffTu r n  P clockwise to turn the radio on and counterclockwise to turn the radio off. The radio chirps and the display briefly shows all feature icons available on your radio. The display then toggles through the available channels and Interference Eliminator Codes.1042b60o.book  Page 16  Monday, October 28, 2002  5:03 PM
17Getting StartedPreliminarySetting the VolumeRotate P while holding down Q or J until you reach a comfortable listening level. Rotate P clockwise to increase the volume or counterclockwise to decrease the volume.Setting a ChannelYour radio has 22 channels.When the radio is on a 1 watt channel, z is displayed. When the radio is on a 0.5 watt channel, y is displayed.To set the channel:1. With the radio on, press \ or \. The current channel begins to flash.2.  Use [ and  ] to change the channel while it is flashing.3.  Press M to set the new channel.Channel Numbers Description Transmit PowerChannels 1-7 GMRS Interstitial 1-7 Also FRS 1-7 1 watt Channels 8-14 FRS 8-14 0.5 watt Channels 15-22 GMRS Primary 1-8 1 watt 1042b60o.book  Page 17  Monday, October 28, 2002  5:03 PM
18PreliminaryTalking and ListeningTalking and ListeningTo communicate, all radios in your group must be set to the same channel and Interference Eliminator Code. • To maximize clarity, hold the radio 2 to 3 inches away from your mouth.• Press and hold M (Push To Talk) and speak into the microphone.The LED indicator light glows continuously when transmitting.• To receive messages, release M.Monitor ButtonPressing and holding Q allows you to listen to the volume level of the radio when you are not receiving. This allows you to adjust the volume, if necessary. You can also use Q to check for activity on the current channel before you transmit (talk).1042b60o.book  Page 18  Monday, October 28, 2002  5:03 PM
19Talking and ListeningPreliminaryTalk RangeYour radio is designed to maximize performance and improve transmission range. It is recommended that you do not use the radios closer than 5 feet apart.Radio EtiquetteYour radio has multiple channels shared on a “take turns” basis. This means that other groups may be talking on the channels. For uninterrupted communications, do not talk over someone who is already using the channel – your message may not be completely heard. Try changing the channel to avoid channel congestion or use Q to check for channel activity. If you hear static while holding down Q, the channel is clear to use.Optimal Range OutdoorsFlat, open areas Medium Range OutdoorsBuildings or treesAlso near residential buildingsMinimal Range OutdoorsDense foliage or mountainsAlso inside some buildings1042b60o.book  Page 19  Monday, October 28, 2002  5:03 PM
20PreliminarySpecial FeaturesSpecial FeaturesInterference Eliminator CodeInterference Eliminator Codes help minimize interference by providing you with a choice of code combinations.1. Press \ or \  until the code begins to flash. 2.  Press [ and  ] to select the code. 3.  Press M to save the code setting. You must set the Interference Eliminator Code to 0 on an FRS radio that uses Interference Eliminator Codes to communicate with other FRS radios that do not have Interference Eliminator Codes.You can specify a different Interference Eliminator Code for each channel. To set a channel and code combination:1. Press \ or \ .2.  Press[ and  ] to select the channel.3.  Press \ or \  again.4.  Press [ and  ] to select the code.5.  Press M to exit the menu and save the channel and code combination.1042b60o.book  Page 20  Monday, October 28, 2002  5:03 PM
21Special FeaturesPreliminaryTimeout TimerThe Timeout Timer feature helps extend battery life by preventing accidental transmission. If you press Mfor 60 continuous seconds, the radio emits a continuous warning tone and stops transmitting.Keypad LockTo avoid accidentally changing your radio settings, press and hold \ or \  for 3 seconds or until f is displayed. You can turn the radio on and off, adjust the volume, receive, transmit, send a call tone, and monitor.  All other functions are locked.To unlock your radio settings, press and hold \ or \   for 3 seconds until f is no longer displayed.Scan (T5620, T5700, T5710 Only)Use scan to monitor channels and codes for transmissions and lock in on one that interests you. You can also use this feature to find someone in your group who has accidentally changed channels and is talking during your scan.To start scanning, briefly press and release Q or  J.If you activate scan while the Interference Eliminator Code is set to 0, the radio checks for activity on each channel regardless of the code in use on that channel. If you activate scan while the Interference Eliminator Code is set to1–38, the radio 1042b60o.book  Page 21  Monday, October 28, 2002  5:03 PM
22PreliminarySpecial Featureschecks for activity on each channel, but only for codes 1–38. Transmissions using code 0 are ignored.When the radio detects channel activity, it stops on that channel and displays the code in use.While the radio is scanning through the channels, h is displayed. When activity on a channel is detected, the radio stops scanning and you can hear the transmission. The display shows the channel and code on which activity was detected.To respond to the transmission, press M within 5 seconds. To stop scanning, briefly press and release Q or  J.Scan AdvanceIf the radio stops on a channel you don’t want to listen to while it is scanning, briefly press [ or  ] to resume scanning for the next active channel.Nuisance DeleteIf the radio continuously stops on an undesired channel while it is scanning, press and hold [ or  ] for at least 3 seconds, then release. This temporarily removes the undesired channel from the scan list. To restore the channel, turn the radio off and then on.Note:  You cannot remove your home channel from the scan list. The home channel is the channel your radio was set to when you activated scan.1042b60o.book  Page 22  Monday, October 28, 2002  5:03 PM
23AlertsPreliminaryAlertsChannel Busy IndicatorWhen a channel is busy, the LED flashes twice per second.Call Tone The call tone alerts others before you start talking. Press ^ to allow users on the same channel and Interference Eliminator Code to hear your call tone. The T5600, T5700, and T5620 models have 5 call tones. The T5710 and T5720 model radios have 10 call tones. Setting the call tone to 0 disables the call tone feature.1. With the radio on, press \ or \  3 times. The current call tone setting begins to flash and E appears in the upper portion of the display.2.  Press [ and  ] to change and hear the call tone.3.  Press \ or \  or M to set new call tone. Roger Beep/Talk Confirmation ToneWhen you turn this feature on, your radio transmits a unique tone when you finish transmitting. It’s like saying “Roger” or “over” and lets others know you are finished talking. • To turn Roger Beep/Talk Confirmation Tone on, press and hold ] as you turn your radio on. When you release M, after transmitting, !is displayed. 1042b60o.book  Page 23  Monday, October 28, 2002  5:03 PM
24PreliminaryAlerts• To turn Roger Beep/Talk Confirmation Tone off, turn your radio off and then back on while pressing and holding ]. ! will not appear on the display.QuieT6000™ (T5700, T5710, T5720 Only)The QuieT6000TM function helps ensure uninterrupted communication by preventing you from hearing transmissions from other model radios. However, other radios can hear you.To turn the QuieT6000 function on or off, press  \ or \   until F is displayed, then select one of the following settings:You can also turn the QuieT6000 function on (Setting 1) or off (Setting -) by pressing and holding ^ while you turn on your radio.If your radio has QuieT6000 on and you want to talk to others in your group who also have QuieT6000 on, you must first transmit a call tone before talking to them. When Setting Function-QuieT6000 is turned off.1QuieT6000 is turned on, but is suspended while scanning.2QuieT6000 is turned on, including while scanning.1042b60o.book  Page 24  Monday, October 28, 2002  5:03 PM
25AlertsPreliminarythe call tone is transmitted, ^ is displayed on the other radios with the same channel and Interference Eliminator Code, letting them know you want to talk to them. Those radios can then receive and transmit until 30 seconds of inactivity occurs, which resets the QuieT6000 function. While QuieT6000 is on, F is displayed. However, during the 30 seconds of inactivity, F flashes.Unique SituationsQuieT6000 can also keep your radio quiet when you are in a situation where noise can be disruptive, such as when you are in a movie theater or out hunting. Set QuieT6000 to either 1 or 2. Now when you receive a call from radio, your radio vibrates while ^ displays on the screen. The ^ icon remains on the screen until you press any button. Only then can you receive and transmit to those radios until 30 seconds of inactivity occurs and the QuieT6000 function resets.1042b60o.book  Page 25  Monday, October 28, 2002  5:03 PM
26PreliminaryAccessoriesAccessoriesThere are many accessories (sold separately) available for your radio. For more information, refer to the brochure included with your radio, contact the place of purchase, call Motorola at: 1-800-353-2729 in the USA or 1-800-739-7834 (TTY), or visit our website at: www.motorola.com/talkaboutTo Use Audio Accessories     1. Make sure the radio is off. Plug the accessory connector into the jack. See page 11 and page 12 for the location of the accessory jack on your radio.1. Turn the radio on and lower the volume before placing the accessory on your head or in your ear.2.  Press Q or J while rotating P to adjust the volume to a comfortable level.3.  To transmit, press M and speak into the accessory microphone, if any.4.  To receive, release M.1042b60o.book  Page 26  Monday, October 28, 2002  5:03 PM
27AccessoriesPreliminaryHands-Free Use/Voice Activation (VOX) with Compatible VOX Accessories (T5710, T5720 Only)Voice activation (VOX) allows you to talk hands-free when used with optional accessories connected to the radio. See the Motorola Talkabout Accessory Brochure for available VOX accessories.1. Turn the radio off.2.  Insert the plug of the audio accessory firmly into the accessory jack. See page 11 and page 12 for the location of the accessory jack on your radio.3.  Turn the radio on.  g is displayed. 4.  Lower the radio volume BEFORE placing the accessory on your head or in your ear.5.  To transmit, speak into accessory microphone. There is a short delay between the time when you start talking and when the radio transmits.To receive, stop talking.VOX operation can be turned off by pressing Mor removing the audio accessory.1042b60o.book  Page 27  Monday, October 28, 2002  5:03 PM
28PreliminaryAccessoriesSetting the Sensitivity LevelAdjusting your radio’s sensitivity level helps minimize the possibility of unintended noises triggering a transmission and enhances the ability of the radio to pick up soft voices.1. Press \ or \  as needed to display g. 2.  Use [ or ] to select the sensitivity level:Note:  When you connect a VOX accessory, the radio is automatically set to the last chosen sensitivity level.3 = High Sensitivity for quiet environments2 = Medium Sensitivity for most environments1 = Low Sensitivity for noisy environments1042b60o.book  Page 28  Monday, October 28, 2002  5:03 PM
29AccessoriesPreliminaryBelt Clip (Included)To attach the swivel belt clip included with your radio:1. Align the belt clip post with the hole in the back of the radio.2.  Gently push until it clicks into place.To remove the belt clip:1. Push the release tab on the top of the belt clip down to release the catch.Pull the belt clip from the back of the radio.1042b60o.book  Page 29  Monday, October 28, 2002  5:03 PM
30PreliminaryTroubleshootingTroubleshootingProblem SolutionNo Power Reposition, replace, or recharge batteries. Erratic Display Reposition, replace, or recharge batteries.Message Not Tr a n s m it t e dMake sure M is completely pressed while you transmit.Reposition, replace, or recharge batteries.Shared channel may be in use; try another channel.Message Not ReceivedConfirm radios have same channel settings and Interference Eliminator Code.Make sure M is not inadvertently being pressed.Reposition, replace, or recharge batteries.Obstructions, operating indoors, or in vehicles may interfere with communication. Change your location.Check volume level.1042b60o.book  Page 30  Monday, October 28, 2002  5:03 PM
31TroubleshootingPreliminaryHearing Other Conversation or Noise on a ChannelShared channel may be in use; try another channel.Limited Talk RangeSteel and concrete structures, heavy foliage, use in buildings and in vehicles will decrease range. Check for clear line of sight to improve transmission.Wearing the radio close to body such as in a pocket or on a belt decreases range. Change location of radio.Heavy Static or InterferenceRadios are too close. Increase your distance to at least 5 feet apart. Radios are too far apart. Obstacles interfere with transmission. Problem Solution1042b60o.book  Page 31  Monday, October 28, 2002  5:03 PM
32PreliminaryUse and CareUse and CareIf the radio gets wet...To clean the radio, use a soft damp cloth.Do not immerse in water.Do not use alcohol or cleaning solutions.XXXXXX1042b60o.book  Page 32  Monday, October 28, 2002  5:03 PM
33Use and CarePreliminaryTurn it off and remove batteries.Dry with soft cloth. Battery contacts may be wiped with a dry, lint-free cloth.Do not use until completely dry.1042b60o.book  Page 33  Monday, October 28, 2002  5:03 PM
Motorola Limited Warranty34PreliminaryMotorola Limited Warrantyfor the United States and CanadaWhat Does this Warranty Cover?Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, messaging devices, and consumer and professional two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products (“Accessories”) and Motorola software contained on CD-ROMs or other tangible media and sold for use with these Products (“Software”) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty.Products and AccessoriesProducts Covered Length of CoverageProducts and Accessories as defined above, unless otherwise provided for below.One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap™ covers and cases.Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.1042b60o.book  Page 34  Monday, October 28, 2002  5:03 PM
Motorola Limited Warranty35PreliminaryExclusionsNormal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product Monaural Headsets. Ear buds and boom headsets that transmit mono sound through a wired connection.Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.Consumer and Professional Two-Way Radio Accessories. Ninety (90) days from the date of purchase by the first consumer purchaser of the product.Products and Accessories that are Repaired or Replaced. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer.Products Covered Length of Coverage1042b60o.book  Page 35  Monday, October 28, 2002  5:03 PM
Motorola Limited Warranty36Preliminaryor Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage.Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage.Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products, Accessories or Software is excluded from coverage.SoftwareProducts Covered Length of CoverageSoftware. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk).Ninety (90) days from the date of purchase.1042b60o.book  Page 36  Monday, October 28, 2002  5:03 PM
Motorola Limited Warranty37PreliminaryExclusionsSoftware Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided “as is” and without warranty.Who is Covered?This warranty extends only to the first consumer purchaser, and is not transferable.What Will Motorola Do?Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service.1042b60o.book  Page 37  Monday, October 28, 2002  5:03 PM
Motorola Limited Warranty38PreliminaryHow to Obtain Warranty Service or Other InformationYou will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.What Other Limitations Are There?ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS USAPhones 1-800-331-6456 Two-Way Radios and Messaging Devices 1-800-353-2729 Pagers 1-800-548-9954CanadaAll Products 1-800-461-4575 TTYTTY 1-888-390-6456 For Accessories and Software, please call the telephone number designated above for the product with which they are used.1042b60o.book  Page 38  Monday, October 28, 2002  5:03 PM
Motorola Limited Warranty39PreliminaryOR IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.1042b60o.book  Page 39  Monday, October 28, 2002  5:03 PM
Export Law Assurances40PreliminaryPatent InformationThis product is manufactured under one or more of the following United States patents. 5896277 5894292 5864752 5699006 5742484 D408396 D399821 D387758D389158 5894592 5893027 5789098 5734975 5861850 D395882 D383745D389827 D389139 5929825 5926514 5953640 6071640 D413022 D416252D416893 D433001 Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. 1042b60o.book  Page 40  Monday, October 28, 2002  5:03 PM

Navigation menu