Giant Telecom VP1000X 2.4GHz FHSS Cordless Network (VOIP) Phone User Manual VP1000 v2 1

Download:
Mirror Download [FCC.gov]
Document ID	519821
Application ID	BvRyFmdinDDHIQG/6Ono9Q==
Document Description	FCC Information
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.64kB (57961 bits)
Date Submitted	2005-03-03 00:00:00
Date Available	2005-03-03 00:00:00
Creation Date	2005-01-29 14:52:04
Producing Software	Acrobat PDFWriter 4.05 for Windows NT
Document Lastmod	2005-01-29 15:00:05
Document Title	VP1000 User Manual v2_1.PDF
Document Creator	VP1000 User Manual v2_1.doc - Microsoft Word
Document Author:	Graham

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Handset and Base Layouts
10
11
12
13
14
15
16
Dialing Keys (0-9; *; #)
Message Waiting Indicator (LED)
Start/End Calls
10
Cancel
Clear/Delete
11
Volume ? / Scroll ?
In case of heavy air interference, e.g. when many 2.4GHz products are active in the same area, the registration
duration may be longer, since registration consists of data transfer, which, in contrast to audio, has to be error
free.
The way to de-register a Handset and register it to another Base Unit is to power down the Base Unit, and
place the Handset into a different Base cradle. After powering down the first Base Unit, the Handset is no
longer linked to it, and can be registered to another base. When the Handset is placed in the other Base cradle,
a new registration will take place, and the old registration doesn’t exist any more.
Troubleshooting
The VP1000 uses your exi sting broadband internet connection for placing and receiving calls. For successful
operation it must be able to communicate with your home Router without error. The most common indication
of trouble is that you do not hear dialtone after you push the Talk button on the handset. Please check the
following before contacting your Service Provider for additional help:
1.
2.
3.
Check that the provided Ethernet cable is connected between the RJ-45 jack on the rear of the
VP1000 to your home Router.
Verify that your home Router is configured to use DHCP to provide IP addresses to attached devices.
If not, enable DHCP on your home Router, or contact your Service Provider for help on manually
setting an IP address in the VP1000.
Your home Router may have a firewall that is blocking access to your Service Provider. Contact your
Service Provider for help on programming your firewall to eliminate this block.
Consumer Information
1.
Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not
alternate or repair any parts of device except specified.
2.
Connection to party line service is subject to state tariffs. Contact the state public utility commission,
public service commission or corporation commission for information.
3.
This equipment is hearing aid compatible.
NOTICE:
According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are
very destructive to telephone equipment connected to AC power sources. To minimize damage from these
types of surges, a surge arrestor is recommended.
Should you experience trouble with this equipment, please contact your Service Provider for service
information.
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
CAUTION: To maintain compliance with the FCC's RF exposure guidelines place the base unit at least 20
cm from nearby persons.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
26
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
•
Consult the dealer or an experienced radio TV technician for help.
Service Provider Customer Support
1-800-TBD
Limited Warranty
WHAT DOES OUR WARRANTY COVER?
•
Any defect in material and workmanship.
FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
• To the original purchaser only – ONE YEAR.
WHAT WILL YOUR SERVICE PROVIDER DO?
•
At our option, repair or replace your unit.
HOW DO I ARRANGE FOR SERVICE, WHETHER IN OR OUT OF WARRANTY?
•
Call Customer Support for Return Authorization at 1 -800-TBD.
27

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:01:29 15:00:05+08:00
Create Date                     : 2005:01:29 14:52:04+08:00
Title                           : VP1000 User Manual v2_1.PDF
Author                          : Graham
Creator                         : VP1000 User Manual v2_1.doc - Microsoft Word
Producer                        : Acrobat PDFWriter 4.05 for Windows NT
Page Count                      : 3
Mod Date                        : 2005:01:29 15:00:05+08:00
Creation Date                   : 2005:01:29 14:52:04+08:00
Metadata Date                   : 2005:01:29 15:00:05+08:00

EXIF Metadata provided by EXIF.tools