Gibson Innovations HTL2163 SOUNDBAR SPEAKER User Manual

Gibson Innovations Limited SOUNDBAR SPEAKER

User Manual

www.philips.com/welcomeUser manualAlways there to help youRegister your product and get support atQuestion?Contact Philips
1ENContents1 Important 2Help and support 2Important safety instructions 2Care for your product 4Care of the environment 42 Your SoundBar 5Main unit 5Remote control 5Connectors 6Wireless subwoofer 63 Connect and set up 8Pair up with the subwoofer 8Placement 8Connect to TV 8Connect audio from TV and other devices 94 Use your SoundBar 11Adjust the volume 11Choose your sound 11Play audio through Bluetooth 11Play music via NFC 12USB storage devices 13Auto standby 13Set display brightness 13Apply factory settings 135 Update software 14Check software version 14Update software via USB 146 Wall mount 157 Productspecications 168 Troubleshooting 179 Notice 19Notice of compliance 19
2 3ENEN• Install all batteries correctly, + and - as marked on the unit.• Do not mix batteries (old and new or carbon and alkaline, etc.).• Remove batteries when the unit is not used for a long time.• The batteries shall not be exposed to excessiveheatsuchassunshine,reorthe like.• Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.• The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.• If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.• When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.• If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. •Apparatus shall not be exposed to dripping or splashing. •Do not place any sources of danger on the apparatus (forexample.liquidlledobjects, lighted candles). •This apparatus may contain lead and mercury. Dispose according to local, State or Federal laws. For disposal or recycling information, please contact your local authorities. For additional assistance on recycling options, please contact www.mygreenelectronics.com or www.eiae.org or www.recycle.philips.com. •Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. •Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling apparatus can cause serious injury or even death.• This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus.Class II equipment symbol This symbol indicates that the unit has a double insulation system. This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING:Toreducetheriskofreorelectric shock, this apparatus should not be exposedtorainormoistureandobjectslledwith liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. 1 ImportantRead and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.Help and supportFor extensive online support, visit www.philips.com/support to:• download the user manual and the quick start guide• watch video tutorials (available only for selected models)• ndanswerstofrequentlyansweredquestions (FAQs)• email us a question• chat with our support representative.Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product.Youcanndthisinformationontheback or bottom of your product.Important safety instructions •Read these instructions. •Keep these instructions. •Heed all warnings. •Follow all instructions. •Do not use this apparatus near water. •Clean only with dry cloth. •Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. •Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus(includingampliers)thatproduce heat. •Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plugdoesnottintoyouroutlet,consultan electrician for replacement of the obsolete outlet. •Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. •Only use attachments/accessories speciedbythemanufacturer. •Use only with the cart, stand, tripod, bracketortablespeciedbythemanufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. •Unplug this apparatus during lightning storm or when unused for long periods of time. •Refer all servicing toqualiedservicepersonnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. •Battery usage CAUTION - To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:
4 5ENEN2 Your SoundBarCongratulations on your purchase, and welcometoPhilips!Tofullybenetfromthe support that Philips offers, register your SoundBar at www.philips.com/welcome.Main unitThis section includes an overview of the main unit. a (Standby-On/Standby indicator)• Switch the SoundBar on or to standby.• When the SoundBar is in standby, the standby indicator turns red.b SOURCESelect an input source for the SoundBar.c Display paneld +/- (Volume)Increase or decrease volume.e NFC tagTap the NFC-enabled device on the tag for Bluetooth connection.Remote controlThis section includes an overview of the remote control.d ea b c a (Standby-On) • Switch the SoundBar on or to standby.• When EasyLink is enabled on your TV (CEC is default on for the SoundBar), press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby.b Source buttonsHDMI ARC: Switch your source to HDMI ARC connection. : Switch to Bluetooth mode.USB: Switch to USB mode.AUX: Switch your audio source to the AUX connection. COAX: Switch your audio source to the coaxial connection. OPTICAL: Switch your audio source to the optical connection. bacdfghije lkCare for your productUseonlymicroberclothtocleantheproduct.Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health.The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.For perchlorate material, special handling may apply. Visit www.dtsc.ca.gov/hazardouswaste/perchlorate.
6 7ENEN a CONNECT (connect)Press to to enter the pairing mode for the subwoofer.b Subwoofer indicator• When the power is turned on, the indicator lights up.• During wireless pairing between the subwoofer and the main unit, the indicator blinks white quickly.• When the pairing succeeds, the indicator lights up white.• When the pairing fails, the indicator blinks white slowly.c AC MAINS~Connect to the power supply.c / (Previous/Next)Skip to the previous or next track in USB mode.d (Play/Pause)• Start, pause or resume play in USB mode.e BASS +/-Increase or decrease bass.f Volume control+/-: Increase or decrease volume. : Mute or restore volume.g SOUNDSelect a sound mode.h SURROUND ON/OFFSelect surround or stereo sound.i AUDIO SYNC +/-Increase or decrease audio delay.j DIMSet the brightness of SoundBar display panel.k NIGHTTurn night mode on or off.l TREBLE +/-Increase or decrease treble.ConnectorsThis section includes an overview of the connectors available on your SoundBar. a • Audio input from a USB storage device.• Upgrade software of this product.• Charge a USB device.b DIGITAL IN-COAXIALConnect to a coaxial audio output on the TV or a digital device. c AUX IN (L/R)Connect to an analog audio output on the TV or an analog device. d DIGITAL IN-OPTICALConnect to an optical audio output on the TV or a digital device. e DC INConnect to the power supply.f TO TV-HDMI OUT (ARC)Connect to the HDMI input on the TV. Wireless subwooferThe SoundBar comes with a wireless subwoofer.bdcefa
8 9ENEN 1 Using a High Speed HDMI cable, connect the HDMI OUT (ARC)-TO TV connector on your SoundBar to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual.2 On your TV, turn on HDMI-CEC operations. For details, see the TV user manual. Note •If your TV is not HDMI ARC compliant, connect an audio cable to hear the TV audio through your SoundBar (see 'Connect audio from TV and other devices' on page 9). •If your TV has a DVI connector, you can use an HDMI/DVI adapter to connect to TV. However, some of the features may not be available.Connect audio from TV and other devicesPlay audio from TV or other devices through your Soundbar speakers.Use the best quality connection available on your TV, Soundbar, and other devices. Note •When your Soundbar and TV are connected through HDMI ARC, an audio connection is not required. (see 'Connect to TV through HDMI (ARC)' on page 8)TVOption 1: Connect audio through a digital optical cableBest quality audio 1 Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device. • The digital optical connector might be labeled SPDIF or SPDIF OUT. Option 2: Connect audio through a digital coaxial cableGood quality audio 1 Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be labeled DIGITAL AUDIO OUT. Option 3: Connect audio through analog audio cablesBasic quality audio1 Using an analog cable, connect the AUX connectors on your SoundBar to the TV3 Connect and set upThis section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •Foridenticationandsupplyratings,seethetypeplateat the back or bottom of the product. •Before you make or change any connections, make sure that all devices are disconnected from the power outlet.Pair up with the subwooferThe wireless subwoofer automatically pairs up with the SoundBar for wireless connection when you turn on the SoundBar and the subwoofer. If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.1 Turn on the SoundBar and the subwoofer. » If the connection to the SoundBar is lost, the indicator on the subwoofer blinks white slowly.2 Press the CONNECT (connect) button on the subwoofer to enter the pairing mode. » The indicator on the subwoofer blinks white quickly.3 Ontheremotecontrol,pressbriey , and BASS +, then within six seconds, press and hold SURROUND ON. » If the pairing succeeds, the indicator on the subwoofer lights up white. » If the pairing fails, the indicator on the subwoofer blinks white slowly.4 If the pairing fails, repeat the steps above.Press [MUTE][MUTE] [BASS+] ,then Long Press [SURR ON] within 6 secs to enter to the pairing mode.PlacementPlace the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall.For best results, place your subwoofer as shown below. Connect to TVConnect your SoundBar to a TV. You can listen to audio from TV programs through your SoundBar. Use the best quality connection available on your SoundBar and TV.Connect to TV through HDMI (ARC)Your SoundBar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your SoundBar by using a single HDMI cable.
10 11ENEN4 Use your SoundBarThis section helps you use the SoundBar to play audio from connected devices.Before you start• Make the necessary connections described in the quick start guide and the user manual.• Switch the SoundBar to the correct source for other devices.Adjust the volume1 Press +/- (Volume) to increase or decrease a volume level.• To mute sound, press (Mute).• To restore the sound, press (Mute) again or press +/- (Volume).Choose your soundThis section helps you choose the ideal sound for your video or music.Sound modeSelectpredenedsoundmodestosuityourvideo or music.1 Press SOUND to select a sound option from the display panel.• AUTO: Automatically select a sound setting based on the sound stream.• POWERFUL: Enjoy thrilling arcade sounds, ideal for action-packed videos and loud parties.• BALANCED: Experience the original sound of your movies and music, without added sound effects. • BRIGHT: Spice up your dull movies and music with added sound effects.• CLEAR: Hear every detail in your music and clear voices in your movies.• WARM: Experience spoken words and music vocals in comfort.• PERSONAL: Personalize the sound based on your preferences. Surround sound modeExperience an immersive audio experience with surround sound modes.1 Press SURROUND ON/OFF to turn surround mode on or off. • On: Create a surround listening experience. • Off: Two-channel stereo sound. Ideal for listening to music.EqualizerChange the high frequency (treble) and low frequency (bass) settings of the SoundBar.1 Press TREBLE +/- or BASS +/- to change the frequency.Synchronize picture and soundIf the audio and video are not synchronized, delay the audio to match the video.1 Press AUDIO SYNC +/- to synchronize the audio with the video.Night modeFor quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT to turn night mode on or off.Play audio through BluetoothThrough Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, AUDIO OUT connectors on the TV or other device. DVD
12 13ENENUSB storage devicesEnjoy audio on a USB storage device, such as an MP3playerandUSBashmemory,etc.What you need• A USB storage device that is formatted for FATorNTFSlesystems,andcomplieswith the Mass Storage Class.• AnMP3orWMAleonaUSBstoragedevice1 Connect a USB storage device to this product.2 Press USB on the remote control. 3 Use the remote control to control play.Button ActionStart, pause or resume play. / Skip to the previous or next track.USB During USB play, press repeatedly to selectarepeatorshufemode,orturn off a play mode.Note •This product may not be compatible with certain types of USB storage device. •If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •Digital camera PTP and MTP protocols are not supported. •Do not remove the USB storage device while it is being read. •DRM-protectedmusicles(MP3,WMA)arenotsupported. •Support a USB port: 5V , 1A.Auto standbyWhen playing media from a connected device, the SoundBar automatically switches to standby if:• no button is pressed for 29 minutes, and• no audio/video play from a connected device.Set display brightnessYou can press DIM repeatedly to select a different brightness level of the display panel on this product.Apply factory settingsYou can reset this product to the default settings programmed at the factory.1 In AUX mode, within three seconds, press - (Volume), BASS - and TREBLE -. » When the factory settings restore is complete, the product automatically switches off and restarts.iPod touch, Android phone, or laptop), and then youcanlistentotheaudiolesstoredonthedevice through your SoundBar speakers.What you need• A Bluetooth device which supports BluetoothproleA2DP,AVRCPandwithBluetooth version as 3.0 + EDR.• The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).1 Press on the remote control to switch the SoundBar to Bluetooth mode. » BT is displayed on the display panel, blinking.2 On the Bluetooth device, switch on Bluetooth, search for and select PHILIPS 3110B to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). » During connection, BT on the display panel blinks.3 Wait until you hear a beep sound from the SoundBar. » When the Bluetooth connection succeeds, BT is displayed on the display panel without blinking. » If the connection fails, BT on the display panel blinks continuously.4 Selectandplayaudiolesormusiconyour Bluetooth device.• During play, if a call is coming, music play is paused. Play resumes when the call ends.• If your Bluetooth device supports AVRCPprole,ontheremotecontrolyou can press / to skip to a track, or press to pause/resume play.5 To exit Bluetooth, select other source.• When your switch back to Bluetooth mode, Bluetooth connection remains active.Note •The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. •If you want to connect your SoundBar with another Bluetooth device, press and hold on the remote control to disconnect the currently connected Bluetooth device. •Philips does not guarantee 100% compatibility with all Bluetooth devices.Play music via NFCNFC (Near Field Communication) is a technology that enables short-range wireless communication between NFC-enabled devices, such as mobile phones.What you need• A Bluetooth device with NFC function.• For pairing, tap the NFC device on the NFC tag of the SoundBar.• The operational range between the SoundBar and a NFC device is approximately 10 meters (30 feet).1 Enable NFC on the Bluetooth device (see the device' s user manual for details).2 Tap the NFC device on the NFC tag of the SoundBar until you hear a beep sound from the SoundBar. » When the Bluetooth connection succeeds, BT is displayed on the display panel without blinking. » If the connection fails, BT on the display panel blinks continuously.3 Selectandplayaudiolesormusiconyour NFC device.• To break the connection, tap again the NFC device with the NFC tag on the SoundBar.
"HTL2163B/F7.BIN".lenamed "HTL2163B/F7.BIN".14 15ENEN6 Wall mountNote •Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •Before wall mounting, make sure the wall can support the weight of your SoundBar. •Before wall mount, you need not remove the four rubber feet at the bottom of the SoundBar, otherwise therubberfeetcannotbexedback.Screw length/diameterDepending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. See the illustration in the quick start guide on how to wall mount the SoundBar.1) Drill two holes on the wall.2) Secure the dowels and screws in the holes.3) Hang the SoundBar on the fastening screws.> 25mm3.5-4mm4mm5 Update softwareTo get the best features and support, update your product with the latest software. What you need• Connect this product to your TV through HDMI.Check software version• In any source mode, press TREBLE -, BASS - and - (Volume) on the remote control.Update software via USB1 Check the latest software version on www.philips.com/support.• Search for your model and click on "Software and drivers".2 Download the software into a USB storage device.a Unzip the download if zipped, and makesurethattheunzippedleisb Putthe  intheroot directory.3 Connect the USB storage device to the (USB) connector on this product.4 Switch this product to the HDMI ARC source, and switch your TV to the HDMI source.5 On the remote control, within 6 seconds press twice, and VOL + once, then hold down SURROUND ON. » If an upgrade media is detected, on the TV screen you are prompted to start the update. » If an upgrade media is not detected, an error message is displayed on the TV screen. Make sure that the latest software of this product is put in the USB storage device.6 Press to start the update. 7 Wait until the update is completed. » If the update is complete, this product automatically turns off and on again.Caution •Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player.
16 17ENEN8 TroubleshootingWarning •Risk of electric shock. Never remove the casing of the product.To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unitThe buttons on the SoundBar do not work.• Disconnect the SoundBar from the power supply for a few minutes, then reconnect.SoundNo sound from SoundBar speakers.• Connect the audio cable from your SoundBar to your TV or other devices. However, you do not need a separate audio connection when the SoundBar and TV are connected through HDMI ARC connection.• Reset your SoundBar to its factory settings.• On the remote control, select the correct audio input.• Make sure that the SoundBar is not muted. Distorted sound or echo.• If you play audio from the TV through the SoundBar, make sure that the TV is muted.Audio and video are not synchronized.• Press AUDIO SYNC +/- to synchronize the audio with the video.Error message is displayed on the display panel.• When "ERROR" is displayed, it indicates that an input audio format is not supported.• When "USB ERROR" is displayed, it indicates that the connected USB device is not supported.• When "HDMI ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected. BluetoothA device cannot connect with the SoundBar.• The device does not support the compatibleprolesrequiredfortheSoundBar.• You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function.• The device is not correctly connected. Connect the device correctly.• The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again.Quality of audio play from a connected Bluetooth device is poor.• The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar.The connected Bluetooth device connects and disconnects constantly.• The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar.• Turn off Wi-Fi function on the Bluetooth device to avoid interference.• For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of the SoundBar.NFCA device cannot connect with the SoundBar via NFC.7 Product specificationsNote •Specicationsanddesignaresubjecttochangewithoutnotice.Amplier• FTC total output power: 40W• Left + Right: 25W (1%THD, 8ohm, 120Hz-20kHz)• Subwoofer: 15W (1%THD, 4ohm, 30Hz-80Hz)• RMS Total output power: 120W RMS (+/- 0.5 dB, 10% THD)• Frequency response: 20 Hz-20 kHz / ±3 dB• Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted)• Input sensitivity:• AUX: 900 mVAudio• S/PDIF Digital audio input:• Coaxial: IEC 60958-3• Optical: TOSLINKUSB• Compatibility: Hi-Speed USB (2.0)• Class support: USB Mass Storage Class (MSC)• File system: FAT16, FAT32, NTFS• SupportsMP3andWMAleformats• Sampling frequency:• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz• WMA: 44.1 kHz, 48 kHz • Constant bit rate:• MP3: 8 kbps-320 kbps• WMA: 32 kbps-192 kbps• Version:• WMA: V7, V8, V9Bluetooth •Bluetoothproles:A2DP,AVRCP •Bluetooth version: 3.0 + EDRMain unit •Power supply: • Model (Philips AC power adapter): DYS602-210309W; AS650-210-AA309• Input: 100-240 V~, 50/60 Hz 1.5 A• Output: 21V , 3.09A •Standbypowerconsumption:≤0.5W• Speaker impedance• Woofer: 8 ohm• tweeter: 16 ohm• Speaker drivers: 2 x (90mm/3.5" x 34mm/1.3") woofer + 2 x 31mm/1.2" tweeter •Dimensions (WxHxD): 843 x 52 x 60 mm •Weight: 1.4 kgSubwoofer• Power supply: 110-240 V~, 50-60 Hz• Power consumption: 20 W• Standbypowerconsumption:≤0.5W• Impedance: 4 ohm• Speaker drivers: 1 x 165 mm (6.5") woofer• Dimensions (WxHxD): 226 x 251 x 306 mm • Weight: 3.9 kgRemote control batteries• 1 x AAA-R03-1.5 V
18 19ENEN9 NoticeThis section contains the legal and trademark notices.Notice of complianceThe device complies with the FCC rules, Part 15. Operation is subject to the following two conditions:a This device may not cause harmful interference, andb This device must accept any interference received, including interference that may cause undesired operation.FCC rulesThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Relocate the receiving antenna.• Increase the separation between equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.Warning:Anychangesormodicationsmadeto this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment.Trade Name: PhilipsResponsible Party:P&F USA, Inc. PO Box 2248 Alpharetta, GA 30023-2248; 1-866-310-0744Canada: CAN ICES(B)/NMB-3(B)This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following Two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.• Make sure that the device is supported by NFC.• Make sure that NFC is enabled on the device (see the device' s user manual for details).• For pairing, tap the NFC device on the NFC tag of the SoundBar.Model number: PHILIPS HTL2163B/F7Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
BulgarianБългарскиCнастоящето,WOOXInnovationsLimitedдекларира,четовабезжичноустройствоевсъответствиесъссъщественитеизискванияидругитеприложимиразпоредбинаДиректива1999/5/EC.CzechČeskyWOOXInnovationsLimited tímtoprohlašuje,žetentoRadioLANdevicejeveshoděsezákladnímipožadavkyadalšímipříslušnýmiustanovenímisměrnice1999/5/ES.DanishDanskUndertegnedeWOOXInnovationsLimitederklærerherved,atfølgendeudstyrRadioLANdeviceoverholderdevæsentligekravogøvrigerelevantekravidirektiv1999/5/EFDutchNederlandsHierbijverklaartWOOXInnovationsLimiteddathettoestelRadioLANdeviceinovereenstemmingismetdeessentiëleeisenendeandererelevantebepalingenvanrichtlijn1999/5/EGBijdezeWOOXInnovationsLimiteddatdezeRadioLANdevicevoldoetaandeessentiëleeisenenaandeoverigerelevantebepalingenvanRichtlijn1999/5/EC.EnglishHereby,WOOXInnovationsLimited,declaresthatthisRadioLANdeviceisincompliancewiththeessentialrequirementsandotherrelevantprovisionsofDirective1999/5/EC.EstonianEestiKäesolevagakinnitabWOOXInnovationsLimitedseadmeRadioLANdevicevastavustdirektiivi1999/5/EÜpõhinõuetelejanimetatuddirektiivisttulenevateleteisteleasjakohastelesätetele.FinnishSuomiValmistajaWOOXInnovationsLimitedvakuuttaatätenettäRadioLANdevicetyyppinenlaiteondirektiivin1999/5/EYoleellistenvaatimustenjasitäkoskeviendirektiivinmuidenehtojenmukainen.FrenchFrançaisParlaprésenteWOOXInnovationsLimiteddéclarequel'appareilRadioLANdeviceestconformeauxexigencesessentiellesetauxautresdispositionspertinentesdeladirective1999/5/CEGermanDeutschHiermiterklärtWOOXInnovationsLimited,dasssichdieser/diese/diesesRadioLANdeviceinÜbereinstimmungmitdengrundlegendenAnforderungenunddenanderenrelevantenVorschriftenderRichtlinie1999/5/EGbefindet".(BMWi)HiermiterklärtWOOXInnovationsLimiteddieÜbereinstimmungdesGerätesRadioLANdevicemitdengrundlegendenAnforderungenunddenanderenrelevantenFestlegungenderRichtlinie1999/5/EG.(Wien)GreekΕλληνικήμετηνπαρουσαWOOXInnovationsLimitedδηλωνειοτιradioLANdeviceσυμμορφωνεταιπροστισουσιωδεισαπαιτησεισκαιτισλοιπεσσχετικεσδιαταξειστησοδηγιασ1999/5/εκ.HungarianMagyarAlulírott,WOOXInnovationsLimitednyilatkozom,hogyaRadioLANdevicemegfelelavonatkozóalapvetõkövetelményeknekésaz1999/5/ECirányelvegyébelõírásainak.ItalianItalianoConlapresenteWOOXInnovationsLimiteddichiarachequestoRadioLANdeviceèconformeairequisitiessenzialiedallealtredisposizionipertinentistabilitedalladirettiva1999/5/CE.LatvianLatviskiAršoWOOXInnovationsLimited deklarē,kaRadioLANdeviceatbilstDirektīvas1999/5/EKbūtiskajāmprasībāmuncitiemartosaistītajiemnoteikumiem.LithuanianLietuviųŠiuoWOOXInnovationsLimiteddeklaruoja,kadšisRadioLANdeviceatitinkaesminiusreikalavimusirkitas1999/5/EBDirektyvosnuostatas.MalteseMaltiHawnhekk,WOOXInnovationsLimited,jiddikjaralidanRadioLANdevicejikkonformamal‐ħtiġijietessenzjaliumaprovvedimentioħrajnrelevantilihemmfid‐Dirrettiva1999/5/EC.PolishPolskiNiniejszymWOOXInnovationsLimitedoświadcza,żeRadioLANdevicejestzgodnyzzasadniczymiwymogamiorazpozostałymistosownymipostanowieniamiDyrektywy1999/5/EC.
PortuguesePortuguêsWOOXInnovationsLimiteddeclaraqueesteRadioLANdeviceestáconformecomosrequisitosessenciaiseoutrasdisposiçõesdaDirectiva1999/5/CE.RomanianRomanăWOOXInnovationsLimiteddeclarăcăacestdispozitivfărăfirrespectăcerințeleesențialeprecumşialtedispozițiirelevantealeDirectivei1999/5/EC.SlovakSlovenskyWOOXInnovationsLimited týmtovyhlasuje,že RadioLANdevicespĺňazákladnépožiadavkyavšetkypríslušnéustanoveniaSmernice1999/5/ES.SlovenianSlovenskoWOOXInnovationsLimitedizjavlja,dajetaradioLANdevicevskladuzbistvenimizahtevamiinostalimirelevantnimidoločilidirektive1999/5/ES.SpanishEspañolPormediodelapresenteWOOXInnovationsLimiteddeclaraqueelRadioLANdevicecumpleconlosrequisitosesencialesycualesquieraotrasdisposicionesaplicablesoexigiblesdelaDirectiva1999/5/CESwedishSvenskaHärmedintygarWOOXInnovationsLimitedattdennaRadioLANdevicestårIöverensstämmelsemeddeväsentligaegenskapskravochövrigarelevantabestämmelsersomframgåravdirektiv1999/5/EG.TurkishTurkWOOXInnovationsLimitedbukablosuzcihazıntemelgereksinimlerive1999/5/ECyonergesindekiilgilikoşullarıkarşıladığınıbeyaneder. 
Specifications are subject to change without notice© 2013 Koninklijke Philips Electronics N.V.All rights reserved.Document order number: 000000000000

Navigation menu