Gigaset Communications 5505H Portable Part User Manual AS18H 28H
Gigaset Communications GmbH Portable Part AS18H 28H
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1412333 |
| Application ID | V5Ied6LQoxDKpTf91mGTPw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 71.78kB (897280 bits) |
| Date Submitted | 2011-02-01 00:00:00 |
| Date Available | 2011-02-01 00:00:00 |
| Creation Date | 2011-01-19 14:16:20 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2011-01-19 14:18:56 |
| Document Title | AS18H_28H.book |
| Document Creator | FrameMaker 7.2 |
| Document Author: | steffen_in |
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / Overview.fm / 19.01.2011
Mitel 5505H handset
1 Charge status of
the batteries
2 Display keys
3 Message key
Flashes: new messages
received
4 Handsfree key
5 Control key (u)
6 Talk key
7 Directory key
(press down)
8 End call and
On/Off key
9 Ringer on/off
(press and hold
in idle status)
10 Keypad lock on/off
(press and hold)
11 Recall key
- Consultation call
(flash)
- Dialling pause
(press and hold)
12 Microphone
13 "Microphone off" key
Display keys on handset:
Pressing a key launches the function that
appears above that key in the display.
11.12.
INT
11:56
MENU
Display
icon
Function when pressed
INT
Call other registered handsets
page 7.
Open main/submenu (see
Menu tree
page 16).
Go back one menu level.
Scroll up/down or adjust
volume with u.
Move cursor to left/right
with u.
Backspace deletes one character at a time from right to left.
Confirm menu function or save
entry.
MENU
“
˜
OK
¢
¢
10
11
12
13
ECO DECT
You are helping to protect the environment with your Mitel 5505H.
Reduced energy consumption
Your telephone has a power-saving adapter plug and uses less power.
Reduced transmission power (depending on the base station)
The transmission power can only be reduced if your base station supports this function.
The transmission power of your telephone is reduced automatically:
◆ The handset's transmission power is reduced depending on the distance to the base station.
◆ The transmission power on the base station is reduced to virtually zero when only one handset is registered and the handset is in the base station.
You can reduce the transmission power of the handset and base station even more by using Eco Mode/Eco
Mode+. For further information, please see your phone's user guide.
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / Overview.fm / 19.01.2011
Safety precautions
Read this user guide and the safety precautions carefully
before use. Explain their content and the potential hazards
associated with using the telephone to your children.
Only use the mains adapter supplied.
¢
Fit only the recommended, rechargeable
batteries (
page 9), i.e. never use any other
battery type or non-rechargeable batteries as this
could result in significant health risks and personal
injury.
The operation of medical appliances may be
affected. Be aware of the technical conditions in
your particular environment, e.g. doctor's surgery.
Do not hold the rear of the handset to your ear
when it is ringing. Otherwise you risk serious and
permanent damage to your hearing.
The handset may cause an unpleasant humming
noise in hearing aids.
Do not install the phone in a bathroom or shower
room. The phone is not splashproof.
Do not use your phone in environments with a
potential explosion hazard, e.g. paint shops.
ƒ
If you give your phone to someone else, make sure
you also give them the user guide.
Disposal
Batteries should not be disposed of in general
household waste. Observe the local waste disposal regulations, details of which can be obtained
from your local authority or the dealer you purchased the product from.
All electrical and electronic equipment must be
disposed of separately from general household
waste using the sites designated by local authorities.
If a product displays this symbol of a crossed-out
rubbish bin, the product is subject to European
Directive 2002/96/EC.
The appropriate disposal and separate collection
of used equipment serve to prevent potential
harm to the environment and to health. They are a
precondition for the re-use and recycling of used
electrical and electronic equipment.
For further information on disposing of your used
equipment, please contact your local authority,
your refuse collection service or the dealer you
purchased the product from.
¢
Emergency numbers cannot be dialled if the keypad lock
page 1) is activated!
Not all of the functions described in this user guide are available in all countries.
Care
Wipe the charging cradle and the handset with a
damp cloth (do not use solvent) or an antistatic cloth.
Never use a dry cloth. This can cause static.
Contact with liquid
If the handset should come into contact with liquid:
◆ Switch the handset off and remove the batteries
immediately.
◆ Allow the liquid to drain from the handset.
◆ Pat all parts dry, then place the handset with the
battery compartment open and the keypad facing
down in a dry, warm place for at least 72 hours
(not in a microwave, oven etc.).
◆ Do not switch on the handset again until it is
completely dry.
When it has fully dried out, you will normally be able
to use it again.
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / starting.fm / 19.01.2011
First steps
Check the pack contents
◆
◆
◆
◆
◆
◆
one Mitel 5505H handset,
one charging cradle,
one mains adapter,
two batteries,
one battery cover,
one user guide.
Setting up the charging cradle
The charging cradle is designed to be operated in enclosed, dry areas at temperatures ranging
from +5°C to +45°C.
Place the charging cradle on a level, non-slip surface.
¤
Please note
Pay attention to the range of the base station.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. The
range is reduced when Eco Mode (
page 1) is activated.
¢
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of
different varnishes and polishes used on today's furnishings, the occurrence of marks on the
surfaces cannot be completely ruled out.
You can also mount the charging cradle on the wall.
Please note:
◆ Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices.
◆ Protect your Mitel from moisture, dust, corrosive liquids and vapours.
Connecting the charging cradle
¤ Connect the flat plug from the power supply 1.
¤ Plug the mains adapter into the plug socket 2.
If you need to disconnect the plug from the charging cradle,
press the release button 1 and disconnect the plug 2.
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / starting.fm / 19.01.2011
Setting up the handset for use
The display is protected by a plastic film.
Please remove the protective film!
Inserting the batteries and closing the battery cover
Warning
Use only the rechargeable batteries (
page 9) recommended by Gigaset Communications
GmbH . Never use conventional (non-rechargeable) batteries, as this could result in significant health risks and damage to property. For example, the outer casing of the batteries
could be destroyed or the batteries could explode. The phone could also malfunction or
be damaged as a result of using batteries that are not of the recommended type.
¢
¤ Insert the batteries the right way
round.
The polarity is indicated in/on
the battery compartment.
+ –
¤ Slide the battery cover back into the
main casing until it clicks into place.
If you need to open the battery cover,
for instance to replace the batteries, place
your fingertip in the grooved area on the
top of the cover and slide down.
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / starting.fm / 19.01.2011
Registering the handset to the base station
Before you can use the phone, you must first register the handset to the base station.
The actual registration procedure will depend on the type of base station.
Automatically register the Mitel 5505H handset to the base station
Put into base
¤ Place the handset with
the display facing up
in the base station.
MENU
Registering
The handset registers automatically. Registration can take up to 5 minutes.
Do not remove the handset from
the base station during this time.
Manually register the Mitel 5505H handset
You must activate manual registration of the handset on both the handset and the
base station.
1. On the handset: MENU
Settings
OK
Handset
OK
Register HS
Enter the base station system PIN (default setting: 0000)
OK.
¢
¢
¢ ¢
¢ ¢
¢
The registration screen is displayed.
Registering
2. On the base station: Within 60 seconds of entering the system PIN, press and hold the registration/paging key (min. 3 seconds). See also the user guide for the base station.
After successful automatic or manual registration, the idle screen is displayed:
INT
MENU
Charge status of the batteries:
– = e V U (flat to full)
– = flashes: batteries almost flat
– e V U flashes: charging
The handset is assigned the lowest unassigned internal number (1–4). If more than one handset is registered to the base station, the internal handset number appears in the top left of the
display, e.g. 2. If the internal numbers 1–4 are already assigned to other devices, number 4 will
be overwritten.
Please note
Only place the handset in the base station or charging cradle that is intended for it.
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / starting.fm / 19.01.2011
Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully charged and discharged.
¤ Place the handset in the base station or charging cradle for eight hours.
¤ Then remove the handset from the base station or charging cradle and do
not replace it until the batteries are fully discharged.
8h
Please note
◆ After the first battery charge and discharge you may replace your handset in the base
station or charging cradle after every call.
◆ Always repeat the charging and discharging procedure if you remove the batteries
from the handset and reinsert them.
◆ The batteries may warm up during charging. This is not dangerous.
◆ After a while, the charge capacity of the batteries will decrease for technical reasons.
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming calls, and
so that the alarm can be used.
¢
¢
¢
¢
¢
¢
¢ ¢
¢
¢
MENU
Settings
OK
Date/Time
OK
Date:
~ (enter the day, month and year in 6-digit format)
OK
Time:
~ (enter hours and minutes in 4-digit format)
OK (display message: Saved)
a (press and hold to return to idle status)
¢
Please note
When entering the time and date, you can move the position of an entry to the left or right
by pressing the control button up or down.
Display in idle status
Once the phone is registered and the time set, the idle display
is shown as in this example.
11.12.
INT
11:56
MENU
Activating/deactivating the handset
Press and hold the end call key a to activate or deactivate the handset.
If you place a deactivated handset in the base station or charging cradle, it will automatically
activate.
Your phone is now ready for use!
If you have any questions about using your phone, please read the tips on troubleshooting
("Questions and answers"
page 9) or contact our Customer Care team
page 10.
¢
¢
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
Making calls
Using the directory and lists
Making external calls and ending
calls
Directory
External calls are calls using the public telephone network.
~ (Enter the phone number) c.
The phone number is dialled. (Or you can first press
and hold c [dial tone] and then enter the number.)
During the call you can adjust the earpiece volume
using t and set the volume with u.
End the call/cancel dialling:
Press the end call key a.
¢
Accepting a call
The handset indicates an incoming call by ringing
and by a display on the screen.
Press the talk key c to accept the call.
When Auto Answer is activated (see Menu tree,
page 16), simply remove the handset from the
base station/charging cradle.
In idle status, use t to activate the menu for setting
the call volume and use u to set the volume.
¢
Switch to mute
You can mute your handset when making external
calls. Your caller can no longer hear you.
Press the "Microphone off" key m during the call to
activate/deactivate the function.
Handsfree talking
To activate while dialling:
Enter the number ~ and press the handsfree key d.
Switching between earpiece and handsfree mode:
During a call and when listening to the answer
machine, press the handsfree key d to activate or
deactivate handsfree talking.
During a call, use t to activate the menu for setting
the handsfree volume and use u to set the volume.
Making internal calls
Internal calls are free calls to other handsets that are
registered to the same base station.
To make a call to other handsets, press
¢ ~ (1...4, enter internal number of the
handset), the handset is called or
INT ¢ star key P, all handsets are called.
◆ INT
◆
When a participant answers you can speak to them.
To end the call, press the end call key a.
To open the directory: press h.
You can save up to 80 phone numbers
(max. 32 digits) with corresponding names
(max. 14 characters). Enter letters/characters
page 9.
¢
Saving the first number in the directory
h ¢ New Entry? ¢ OK
¢ ~ (enter number) ¢ OK
¢ ~ (enter name) ¢ OK
Storing a number in the directory
h ¢ MENU ¢ New Entry ¢ OK
¢ ~ (enter number) ¢ OK
¢ ~ (enter name) ¢ OK
Selecting a directory entry
Open the directory with h. You have the following
options:
◆ Use u to scroll through the entries until the
required name is selected.
◆ Enter the first character of the name and scroll to
the entry with u, if required.
Dialling with the directory
h ¢ u (select entry) ¢ c
Using other functions
h ¢ u (select entry) ¢ MENU
The following functions can be selected with u:
New Entry
Save new phone number.
Show Number
Display the phone number.
Use Number
Edit Entry
Edit or add to the number.
Then dial or select other
functions from the MENU.
Edit selected entry.
Delete Entry
Delete selected entry.
Send Entry
Send a single entry to another
handset (
page 8).
Delete all directory entries.
Delete List
Send List
Shortcut
¢
¢
Send the complete list to another
handset (
page 8).
For shortcuts, assign the current
entry to a key.
Using shortcut keys
You can assign directory entries to the keys 0 and 2–9:
h ¢ u (select entry) ¢ MENU ¢ Shortcut ¢ OK
¢ ~ (press the key you want to assign the entry to)
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
To dial, press and hold the required shortcut key.
Transferring the directory to another handset
Requirements:
◆ The sending and receiving handsets must both be
registered to the same base station.
◆ The other handset and the base station can send
and receive directory entries.
h ¢ u (select entry) ¢ MENU ¢ Send Entry /
Send List ¢ OK ¢ ~ (enter the internal number of
the receiving handset)
¢ OK
Last number redial list
This list contains the ten last dialled numbers.
Enter the wake-up time in hours and minutes, then
press OK.
Phone settings
¢
For details on how to set audio settings, see Menu
tree
page 16.
Changing the display language
¢
Managing entries in the last number redial list
c (press briefly) ¢ u (select entry) ¢ MENU
You can select the following settings:
Use Number
Copy to Dir.
Edit or add to the number.
Then dial or select other
functions from the MENU.
Copy an entry to the directory.
Delete Entry
Delete selected entry.
Delete List
Delete all entries.
Opening lists with the message key
An advisory tone sounds and the message key
flashes as soon as a new entry appears in the list. A
message appears in the display.
If you press the message key f, you will see all lists
that contain new messages. If only one list contains
new messages, this will be opened automatically.
Setting the alarm clock
Activating/deactivating the alarm clock
¢
¢
MENU
Alarm Clock
OK (‰ = on)
¢ OK ¢ Activation
When activated:
¢ Set the wake-up time ¢ OK
When the alarm clock rings, press any key to switch it
off for 24 hours. If the alarm clock is set, the wake-up
icon l will appear on the screen and the wake-up
time will be displayed instead of the date.
Setting the wake-up time
¢
¢ Alarm Clock ¢ OK ¢ Wake-up time
MENU
OK
¢ ¢
¢ ¢
¢
The current language is indicated by ‰.
¢ OK
If you accidentally choose a language you do not
understand:
MENU
Dialling from the last number redial list
c (press briefly) ¢ u (select entry) ¢ c
¢
MENU
Settings
OK
Handset
OK
Language
OK
select the language
¢ 4 2 1 (press the keys one after the other)
Select the correct language with u and press OK.
Resetting the handset
You can reset individual settings and changes that
you have made. Entries in the directory, the calls list
and the handset's registration to the base station will
be retained.
¢
¢
MENU
Settings
Reset Handset
¢ OK ¢ Handset ¢ OK
¢ OK
Cancel the reset with a.
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
Appendix
Questions and answers
Entering letters/characters
If you have any queries about the use of your telephone, visit our website at
www.gigaset.com/customercare
for assistance 24/7. The table below contains a list of
common problems and possible solutions.
Press the relevant key the number of times indicated.
Briefly press the hash key # to switch from "Abc" to
"123" mode, from "123" to "abc" mode and from "abc"
to "Abc" mode.
Standard characters
1x 2x
1)
a b
d e
g h
j k
m n
p q
t u
w x
. ,
* /
Abc
-->
123
123
-->
abc
3x
£
4x
5x
¥
ä
ë
ï
6x
¤
á
é
í
7x 8x 9x 10x11x12x13x14x
à
è
ì
â
ê
î
ã
ç
ö
ü
ñ
ß
ú
ÿ
ó
ò
ô
õ
ù û
ý æ ø
- : ¿
> %
§
å
¡
’
Specifications
Recommended batteries
Technology:
Nickel-metal-hydride (NiMH)
Size:
AAA (Micro, HR03)
Voltage:
1.2 V
Capacity:
400–800 mAh
We recommend the following types of battery:
◆ GP 550/700 mAh
◆ Yuasa Phone 700/800 mAh
◆ Peacebay 550/650 mAh
(Valid at the time of going to press)
The handset is supplied with recommended batteries.
General specifications
Environmental conditions
in operation
Cause
Solution
Press the end call
key a for approx.
5 seconds or place the
handset in the base
station.
The batteries
Charge or replace
are flat.
the batteries.
No wireless
The handset is out- Move the handset
connection
side the range of closer to the base stato the base sta- the base station.
tion.
tion,
The handset is
Base flashes in not registered.
Register the handset
the display.
The base station
page 5.
is not turned on.
Check the mains plug
on the base station.
Nothing
appears in
the display.
The handset is
not switched on.
¢
1) Space
DECT standard
GAP standard
Range
Problem
is supported
is supported
up to 300 m outdoors
up to 50 m indoors
+5°C to +45°C, 20% to
75% relative humidity
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
10
Industry Canada Certification
Operation is subject to the following two conditions
(1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device.
NOTICE: The Industry Canada label identifies certified
equipment. This certification means that the equipment meets certain telecommunications network,
protective, operational and safety requirements as
prescribed in the appropriate Terminal Equipment
Technical Requirements document(s). The Department does not guarantee the equipment will operate
to the user’s satisfaction.
Before installing this equipment, users should ensure
that it is permissible to be connected to the facilities
of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection. The customer should be
aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated
by a representative designated by the supplier.
Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the
telecommunications company cause to request the
user to disconnect the equipment.
Users should ensure for their own protection that
the electrical ground connections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together.
This precaution may be particularly important in rural
areas
NOTE: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as
appropriate.
This product meets the applicable Industry Canada
technical specifications.
The Ringer Equivalence Number is an indication of
the maximum number of devices allowed to be connected to a telephone interface. The termination of
an interface may consist of any combination of
devices subject only to the requirement that the sum
of the RENs of all devices does not exceed five.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
FCC / ACTA Information
Warning: Changes or modifications to this unit not
expressly approved by Gigaset Communications USA
LLC could void the FCC authority to operate the
equipment. This includes the addition of any external
antenna device.
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the
bottom of the base station is a label that contains,
among other information, a product identifier in the
format US:AAAEQ##TXXXX. If requested, this number
must be provided to the telephone company.
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices
that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but
not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may
be connected to a line, as determined by the total
RENs, contact the local telephone company.
For products approved after July 23, 2001, the REN for
this product is part of the product identifier that has
the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.
A copy of the supplier's Declaration of Conformity
(SDoC) is available at this Internet address:
www.gigaset.com/docs.
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance, that temporary discontinuance of service
may be required. But if advance notice isn’t practical,
the telephone company will notify the customer as
soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it
is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service. If
you experience trouble with this telephone system,
disconnect it from the network until the problem has
been corrected or until you are sure that the equipment is not malfunctioning.
If trouble is experienced with this equipment, for
repair or warranty information, please contact Support at 1-866 247-8758. If the equipment is causing
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
11
harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. This equipment is
of a type that is not intended to be repaired by the
Customer (user).
This telephone system may not be used on coin service provided by the telephone company. Connection
to party line service is subject to state tariffs. Contact
the state public utility commission, public service
commission or corporation commission for information. Privacy of communications may not be ensured
when using this phone.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation of this equipment does not disable your alarm
equipment. If you have questions about what will
disable alarm equipment, consult your telephone
company or a qualified installer.
This telephone system equipment has been tested
and found to comply with the limits for Class B digital
device, pursuant to Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. Some cordless telephones operate at frequencies that may cause interference to nearby TV’s and VCR’s; to minimize or prevent such interference, the system base should not be
placed near or on top of a TV or VCR; and, if interference is experienced, moving the base farther away
from the TV or VCR will often reduce or eliminate
the interference.
However, there is no guarantee that interference will
not occur in a particular installation. If this telephone
system does cause harmful interference to radio or
television reception, which can be determined by
turning the system off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the base station
and receiver.
3. Connect the base station into an outlet on a circuit
different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio TV
technician for help.
Notice for Direct Inward Dialing ("DID")
ALLOWING THIS EQUIPMENT TO BE OPERATED IN
SUCH A MANNER AS TO NOT PROVIDE FOR PROPER
ANSWER SUPERVISION IS A VIOLATION OF PART 68 OF
THE FCC‘S RULES.
Notice to Hearing Aid Wearers:
This phone system is compatible with inductively
coupled hearing aids.
Power Outage:
In the event of a power outage, your cordless
telephone will not operate. The cordless telephone
requires electricity for operation. You should have a
telephone that does not require electricity available
for use during power outages.
Notice:
The installation of the base unit should allow at least
8 inches between the base and persons to be in
compliance with FCC RF exposure guidelines.
For body worn operation, the portable part (handset)
has been tested and meets FCC RF exposure guidelines. Use with an accessory that contains metal parts
may not ensure compliance with FCC RF exposure
guidelines.
Notice to telephone company service:
If you need service from your telephone company,
please provide them with the information
– Facility interface Code (FIC)
– Service Order Code (SOC)
– Universal Service Order Code (USOC)
as indicated on the label on the bottom side of the
base station.
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
12
Safety precautions
Before using your telephone equipment, basic safety
instructions should always be followed to reduce the
risk of fire, electric shock and injury to persons.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the
product.
3. Unplug this product from the wall telephone jack
and power outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use damp cloth for
cleaning.
4. Do not use this product near water, for example,
near a bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basement or near a swimming pool.
5. Place this product securely on a stable surface. Serious damage and/or injury may result if the unit falls.
6. Slots or openings in the cabinet and the back and
bottom are provided for ventilation, to protect it from
overheating. These openings must not be blocked or
covered. This product should never be placed near or
over a radiator or heat register, or in a place where
proper ventilation is not provided.
7. This product should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of AC line power to your
home, consult your dealer or local power company.
8. Do not place objects on the power cord. Install the
unit where no one can step or trip on the cord.
9. Do not overload wall outlets and extension cords as
this can result in the risk of fire or electric shock.
10. Never push objects of any kind into this product
through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in
the risk of fire or electric shock. Never spill liquid of
any kind on this product.
11. To reduce the risk of electric shock or burns, do not
disassemble this product. Take it to a qualified service
center when service is required. Opening or removing
covers may expose you to dangerous voltages, dangerous electrical current or other risks. Incorrect reassembly can cause electric shock when the appliance
is subsequently used. Disconnect TNV circuit connector before removing cover.
12. Unplug the product from the wall outlet and refer
servicing to qualified service personnel under the following conditions:
a.) When the power cord is damaged or frayed.
b.) If liquid has been spilled into the product.
c.) If the product has been exposed to rain or water.
d.) If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions because improper adjustment of other controls
may result in damage and may require extensive
work by a qualified technician to restore the product
to normal operation.
e.) If the product has been dropped or physically has
been damaged.
f.) If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless
type) during a thunderstorm. There may be a remote
risk of electrical shock from lightning. Therefore we
suggest a surge arrestor.
14. Do not use the telephone to report a gas leak in
the vicinity of the leak.
15. Emergency/911 numbers may not be dialed if the
keypad is locked.
16. Minimum No. 26 AWG telecommunication line
cord must be used with this phone.
BATTERY SAFETY PRECAUTIONS
To reduce the risk of fire, injury or electric shock, and
to properly dispose of batteries, please read and
understand the following instructions.
CONTAINS NICKEL METAL HYDRIDE BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT DISPOSE OF IN MUNICIPAL WASTE.
1. Only use the batteries specified for use with this
product.
2. DO NOT USE NICKEL CADMIUM OR LITHIUM BATTERIES, or mix batteries of different sizes or from different manufacturers in this product. DO NOT USE
NONRECHARGEABLE BATTERIES.
3. Do not dispose of the batteries in a fire; the cells
may explode. Do not expose batteries to water. Check
with local codes for special disposal instructions.
4. Do not open or mutilate the batteries. Released
electrolyte is corrosive and may cause damage to the
eyes or skin. The electrolyte may be toxic if swallowed.
5. Exercise care in handling the batteries in order not
to short the batteries with conducting materials such
as rings, bracelets, and keys. The batteries or conducting material may overheat and cause burns or fire.
6. Charge the batteries provided with, or identified for
use with, this product only in accordance with the
instructions and limitations specified in the user’s
manual. Do not attempt to charge the batteries with
any means other than that specified in the users
manual.
7. Periodically clean the charge contacts on both the
charger and handset.
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
13
Service (Customer Care)
Customer Care Warranty for Cordless Products
To obtain Customer Care Warranty service,
product operation information, or for problem resolution, call:
Toll Free: 1-866 247-8758
End-user limited warranty
This product is covered by a one year limited warranty. Any repair replacement or warranty service,
and all questions about this product should be
directed to: 1-866 247-8758.
This limited, non-transferable warranty is provided to
the original buyer/end-consumer ("you") for systems,
handsets and accessories (collectively, "Product") provided by Gigaset Communications USA LLC or
Gigaset Communications Canada Inc. (collectively
"Gigaset NAM"). Gigaset NAM warrants to you that at
the date of purchase, the Product is free of defects in
workmanship and materials and the software
included in the Product will perform in substantial
compliance to its program specifications.
1. WARRANTY PERIOD
The Product warranty period is one (1) year from the
original date of purchase by you. Proof of purchase
(e.g., sales slip or invoice) must be provided with any
Product returned during the warranty period. Batteries supplied with the Products are warranted to be
free from defects at the time of purchase only.
2. EXCLUSIVE REMEDY
Gigaset NAM's entire liability and your exclusive remedy if the Product is defective in materials or workmanship during the warranty period and is returned
shall be that the Product will be repaired or replaced
as set forth in Section 4 below. Reconditioned
replacement components, parts or materials may be
used in the replacement or repair. Data in the memory of the Product may be lost during repair.
3. THIS LIMITED WARRANTY DOES NOT
COVER AND IS VOID WITH RESPECT TO
THE FOLLOWING:
– Cosmetic damage, physical damage to the surface
of the Product, including, without limitation,
breakage, cracks, dents, scratches or adhesive
marks on the LCD screen or outside casing of the
Product.
– Products which have been repaired, maintained
or modified (including the antenna) by anyone
other than Gigaset NAM or a Gigaset NAMapproved repair facility, or that have been improperly installed.
– Cost of installation, removal or reinstallation.
– Damage due to any telephone, electronic, hardware or software program, network, Internet or
computer malfunctions, failures, or difficulties of
any kind, including without limitation, server failure or incomplete, incorrect, garbled or delayed
computer transmissions.
– Equipment and components not manufactured,
supplied or authorized by Gigaset NAM.
– Modification of the Product's components, or
operation of the Product in an unsuitable environment or in a manner for which it is not intended,
including but not limited to failures or defects
caused by misuse, abuse, accidents, physical damage, abnormal operation, improper handling or
storage, neglect, alterations, unauthorized installation, removal or repairs, failure to follow instructions, problems caused by the carrier's network
coverage, exposure to fire, water or excessive
moisture or dampness, floods, or extreme
changes in climate or temperature, acts of God,
riots, acts of terrorism, spills of food or liquids,
viruses or other software flaws introduced into the
Product or other acts which are not the fault of
Gigaset NAM and which the Product is not specified to tolerate, including damage caused by mishandling or blown fuses.
– Products which have had warranty stickers, electronic serial number and/or serial number label
removed, altered, rendered illegible or fraudulently applied to other equipment.
– Signal reception problems (unless caused by
defect in material or workmanship in the Product).
– Products operated outside published maximum
ratings.
– Performance of the Products when used in combination with other products or equipment not
manufactured, supplied or authorized by Gigaset
NAM.
– Consumables (such as batteries and fuses).
– Payments for labor or service to representatives or
service centers not authorized to perform product
maintenance by Gigaset NAM.
– Loss of data.
– Testing and examination discloses that the
alleged defect or malfunction in the Product does
not exist.
This warranty does not cover customer education,
instruction, installation or removal, set up adjust-
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
14
ments, problems related to service(s) provided by a
carrier or other service provider, and/or signal reception problems. Gigaset NAM shall not be responsible
for software, firmware, information, or memory data
contained in, stored on, or integrated with any Products returned for repair, whether under warranty or
not. This warranty is valid only in the country in which
it is purchased (i.e., the United States of America or
Canada respectively, but not both).
USE WITH ACCESSORIES NOT SUPPLIED BY
GIGASET NAM OR NOT OTHERWISE EXPRESSLY
AUTHORIZED BY GIGASET NAM MAY VOID WARRANTY.
4. WARRANTY CLAIM PROCEDURE
All warranty claims must be made by notifying
Gigaset NAM prior to the expiration of the warranty
period. Gigaset NAM's obligation to provide warranty
support shall not extend past the end of the warranty
period, except that any product repaired or replaced
during the warranty period shall continue to be warranted for the balance of such warranty period or
thirty (30) days, whichever is greater.
Support service will be provided for you by accessing
the toll free customer service number:
1-866 247-8758
5. LIMITATION OF WARRANTY
Gigaset NAM makes no warranty or representation
that the software in the Products will meet your
requirements or will work in combination with any
hardware or applications software products provided
by third parties, that the operation of the software
will be uninterrupted or error free, or that all defects
in the software products will be corrected.
6. LIMITATION ON REMEDIES; NO
CONSEQUENTIAL OR OTHER DAMAGES
Your exclusive remedy for any breach of this limited
warranty is as set forth above. Except for any refund
elected by Gigaset NAM, YOU ARE NOT ENTITLED
TO ANY DAMAGES, INCLUDING BUT NOT LIMITED
TO CONSEQUENTIAL DAMAGES, if the Product does
not meet the limited warranty , and, to the maximum
extent allowed by applicable law, even if any remedy
fails of its essential purpose. The terms below ("Exclusion of Incidental, Consequential and Certain Other
Damages") are also incorporated into this limited
warranty . Some states/jurisdictions/provinces do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This limited warranty gives
you specific legal rights. You may have others which
vary from state/jurisdiction/province to state/jurisdiction/province.
7. DISCLAIMER OF WARRANTIES
GIGASET NAM AND ITS SUPPLIERS PROVIDE THE
PRODUCT AND SUPPORT SERVICES (IF ANY) AS IS
AND WITH ALL FAULTS. THE LIMITED WARRANTY IS IN
LIEU OF ANY OTHER EXPRESS WARRANTIES (IF ANY)
CREATED BY ANY DOCUMENTATION OR PACKAGING
EXCEPT FOR THE LIMITED WARRANTY, AND TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW
IS IN LIEU OF ANY IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, OF ACCURACY OR
COMPLETENESS OR RESPONSES, OF RESULTS, OF
WORKMANLIKE EFFORT, OF LACK OF VIRUSES AND
OF LACK OF NEGLIGENCE, ALL WITH REGARD TO THE
PRODUCT, AND THE PROVISION OF OR FAILURE TO
PROVIDE SUPPORT SERVICES. ALSO, THERE IS NO
WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, OR CORRESPONDENCE TO
DESCRIPTION OR NONINFRINGEMENT WITH REGARD
TO THE PRODUCT. Some states/jurisdictions/provinces do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above exclusions or limitations may not apply to you. If an implied
warranty or condition is created by your state/province and federal or state/provincial law prohibits disclaimer of it, you also have an implied warranty or
condition, BUT ONLY AS TO DEFECTS DISCOVERED
DURING THE PERIOD OF THIS LIMITED WARRANTY
(ONE YEAR). AS TO ANY DEFECTS DISCOVERED AFTER
THE ONE YEAR PERIOD, THERE IS NO WARRANTY OR
CONDITION OF ANY KIND.
This limited warranty gives you specific legal rights,
and you may also have other rights which vary from
state to state/province to province. In no event shall
Gigaset NAM's liability exceed the cost of repairing or
replacing defective Products as provided herein, and
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
15
any such liabilities will terminate upon expiration of
the warranty period.
Any supplements or updates to the Product or the
software in the Product, including without limitation,
any (if any) software fixes or upgrades or bug fixes
provided to you after the expiration of the one year
limited warranty period are not covered by any warranty or condition, express, implied or statutory.
8. EXCLUSION OF INCIDENTAL,
CONSEQUENTIAL AND CERTAIN OTHER
DAMAGES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL GIGASET NAM, SELLER
OR THEIR SUPPLIERS BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED
TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR FAILURE TO MEET ANY DUTY INCLUDING
OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR
OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN
ANY WAY RELATED TO THE USE OF OR INABILITY TO
USE THE PRODUCT, THE PROVISION OF OR FAILURE
TO PROVIDE SUPPORT SERVICES, OR OTHERWISE
UNDER OR IN CONNECTION WITH ANY PROVISION OF
THIS LIMITED WARRANTY, EVEN IN THE EVENT OF THE
FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT OR BREACH OF WARRANTY OF GIGASET NAM OR SELLER OR ANY SUPPLIER, AND EVEN IF GIGASET NAM OR SELLER OR ANY
SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. REPAIR OR REPLACEMENT, AS PROVIDED UNDER THE WARRANTY, IS YOUR SOLE AND
EXCLUSIVE REMEDY FOR BREACH OF THE LIMITED
WARRANTY.
9. LIMITATION OF LIABILITY AND
REMEDIES
NOTWITHSTANDING ANY DAMAGES THAT YOU
MIGHT INCUR FOR ANY REASON WHATSOEVER
(INCLUDING, WITHOUT LIMITATION, ALL DAMAGES
REFERENCED ABOVE AND ALL DIRECT OR GENERAL
DAMAGES), THE ENTIRE LIABILITY OF GIGASET NAM,
SELLER AND ANY OF THEIR SUPPLIERS UNDER ANY
PROVISION OF THIS LIMITED WARRANTY AND YOUR
EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING
(EXCEPT FOR ANY REMEDY OF REPAIR OR REPLACEMENT ELECTED BY GIGASET NAM OR SELLER OR SUPPLIER WITH RESPECT TO ANY BREACH OF THE LIMITED WARRANTY) SHALL BE LIMITED TO THE GREATER
OF THE AMOUNT ACTUALLY PAID BY YOU FOR THE
PRODUCT OR FIVE DOLLARS ($5.00 USD/CAN). THE
FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.
10. GOVERNING LAW
If this Product was purchased in the United States of
America this limited warranty will be governed by the
laws of Texas, and exclude the United Nations Convention on Contracts for the International Sale of
Goods. If this Product was purchased in Canada this
limited warranty will be governed by the laws of the
Province of Ontario and the federal laws of Canada
applicable therein, and exclude the United Nations
Convention on Contracts for the
International Sale of Goods.
If you want to learn more about Gigaset Service or for
Support on your Gigaset phone, visit our web site at
http://www.gigaset.com or please call
1-866 247-8758.
Issued by
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
Manufactured by Gigaset Communications GmbH
under trademark license of Siemens AG.
© Gigaset Communications GmbH 2011
All rights reserved.
Subject to availability. Rights of modifications
reserved.
Product attributes subject to change.
We reserve the right, to make changes without notice
in equipment design and/or components.
Part Number:
© Copyright 2011.
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
16
Menu tree
Your phone has an extensive range of features. These
are offered in the form of menus.
To select a function while the phone is in idle status,
press MENU (open menu), use the t and v keys to
scroll to the function you require and press OK to confirm.
To return to idle status: press and hold the a key.
As an alternative to selecting functions using the t
and v keys, you can also enter the digit combination
that is in front of the function in the menu tree.
For setting the time and date, for example:
MENU
Alarm Clock
1-1 Activation
Activating/deactivating the alarm clock
1-2 Wake-up time
Input format: HHMM
¢ 4 1 ¢ OK
Audio Settings
2-1 Handset Volume
2-2 Ringer Volume
2-3 Ringer Melody
2-1-1 Earpiece
Can be set to one of 3 levels
2-1-2 Speaker
Can be set to one of 5 levels
5 levels + "crescendo" available
2-3-1 External Calls
10 ringer melodies available for external calls
2-3-2 Internal Calls
10 ringer melodies available for internal calls
2-3-3 Alarm Clock
10 ringer melodies available for alarm clock
2-4 Advis. Tones
Activate/deactivate
2-5 Battery Low
2-5-1 Off
2-5-2 On
Warning tone to indicate battery never
is almost flat:
always
2-5-3 During Call
Voice Mail (Menu dependent on base station)
Settings
4-1 Date/Time
4-2 Handset
4-3 Base
only during a call
Enter date (DDMMYY format), then time (HHMM format)
¢ page 8
4-2-1 Language
Set the display language
4-2-2 Auto Answer
Automatically activate/deactivate auto answer
4-2-3 Register HS
Manually register the handset
4-2-4 Reset Handset
Reset the handset
¢ page 8
¢ page 5
¢ page 7
(Menu dependent on base station)
Issued by
Gigaset Communications GmbH
Frankenstrasse 2a, 46395 Bocholt
Gigaset Communications GmbH is a trademark licensee of Siemens AG
© Gigaset Communications GmbH 2010
All rights reserved.
Subject to availability.
Rights of modifications reserved.
www.gigaset.com
This user guide is made from 100% recycled paper.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : AS18H_28H.book Creator : steffen_in Create Date : 2011:01:19 14:16:20Z Creator Tool : FrameMaker 7.2 Modify Date : 2011:01:19 14:18:56Z Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:7dd0e4d0-01c5-4426-b43a-b00911261c7c Instance ID : uuid:60d1be08-c7bf-4d9a-b22f-4f81b1ca6f46 Page Mode : UseOutlines Page Count : 16 Author : steffen_inEXIF Metadata provided by EXIF.tools