Gigaset Communications V200AM 1.9GHZ CORDLESS PHONE User Manual V200 kombi

Gigaset Communications GmbH 1.9GHZ CORDLESS PHONE V200 kombi

USERS MANUAL

User GuideVERIZON DIGITAL CORDLESS PHONE 200AMwith DUAL KEYPAD and DIGITAL ANSWERING MACHINEDECT 6.0 DIGITAL TECHNOLOGY© 2008 Verizon© 2008 Verizon. All rights reserved. Verizon and the Verizon logos are trademarks of Verizon Trademark Services LLC. All other trademarks are the trademarks of their respective owners. Product photo may di er from actual product, however functionality remains as stated above. Speci cations are subject to change without notice.UCZZ01953ZZ(0)black Pantone 1795 C Liebreich MedienproduktionUser Guide V200 AM.indd 1User Guide V200 AM.indd 1 03.06.2008 9:34:26 Uhr03.06.2008 9:34:26 Uhr
1The handset at a glanceVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / kombi_overview.fm / 9.6.08The handset at a glance 1Display in idle status 2Charge status of the batteries = e U (empty to full) = flashes: batteries almost empty= U flashes: batteries charging3Display keys (page 11)4Control key t Access to Call Log list.s Access to directory.5Mute key Mute/unmute microphone.6End Call key, On/Off key End call, cancel function, return to idle sta-tus, activate/deactivate handset (press and hold in idle status).72.5-mm socket (mono) for headset8Pound (#) key Enter symbol #.Keypad lock on/off (press and hold in idle status).Switch between uppercase/lowercase let-ters for text entry.9Redial/Pause key Open redial list (in idle status) or insert a dialing pause (when editing a number).10 Microphone 11 Intercom/Hold/Conference keySet up an internal call.Switch between external call and internal party (handset/base station), or transfer a call during external call.Set up a conference call between an exter-nal line and an internal party (handset/base station). Press and hold the key in hold-intercom mode.12 Star (*) key Ring tone on/off (press and hold).Switch temporarily to tone dialing (DTMF).Switch between AM and PM when setting time. Change Call list display format.13 Talk/Flash key Answer or start a call.Key flashes: Incoming call.Add a flash (in the directory).Send FLASH (when off hook).14 Handsfree:key Answer or place a call in speaker mode.Switch between speaker on and speaker off (in off-hook mode).15 Voice mailConnect to your voice mailbox.16 Signal strength ÄHandset is linked with the base station.ÄFlashes: out of range.Note:Pictures in this user manual may differ from the actual product.ÄÕ e INT 1 01/31 09:45 123456789111314151610§§§§Menu§§§§12
2The base station at a glanceVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / kombi_overview.fm / 9.6.08The base station at a glance 1Numeric key pad 2Control key t Access to Call Log list.s Access to directory.3Display keys (page 11)4Display in idle status 5Answering machine iconIs on when the answering machine is on.6Memory Full iconAnswering machine's message memory is full.7Remote control iconIs on when the answering machine is con-trolled by a handset.8Ringer off iconIs on when the ring tone volume of the base station is turned off.9Answering machine On/Off keyActivate/deactivate answering machine.10 Volume keys– In idle mode: change the ring tone vol-ume of the base station.– During message playback: change vol-ume of playback.– During call: change volume of loud-speaker.– During call screening: change volume of call screening.11 Start/Stop key with integrated LEDStart/stop playback.LED status indicator:– Is on when playing messages.– Flashes slowly when there is at least one new message on the answering machine.– Flashes rapidly when the message mem-ory is full.12 Erase keyErase current message during playback.Erase all old messages (press and hold in idle mode).13 Redial/Pause key Open redial list (in idle status) or insert a dialing pause (when editing a number).14 Page keyPage handsets (press briefly).Start the registration procedure (press and hold in idle mode). You will hear a beep.15 Mute key Mute/unmute microphone.16 Intercom/Hold/Conference keySet up an internal call.ÕÉ×Å SUN 09:23 AM 01/31§§§§§§§§§Menu§§§§§§§§§1235678 91011121314151617184
3The base station at a glanceVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / kombi_overview.fm / 9.6.08Switch between an external call and internal party (handset/base station), or transfer a call during an external call.Set up a conference call between an exter-nal line and an internal party (handset/base station). Press and hold the key in hold-intercom mode.17 End Call key End call, cancel function, return to idle sta-tus.18 Talk/Flash key Answer or make a call.Add a flash (in the directory).Send FLASH (when off hook).Please remember:uIf the answer machine is being oper-ated from a handset, or if it is recording a message, you cannot operate it from the base station. uIf the start/stop key flashes although the answer machine is switched off, it means that there is still at least one new message that has not been played back.
4ContentsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / V200_kombi_IVZ.fm / 9.6.08ContentsThe handset at a glance . . . . . . . . 1The base station at a glance . . . . 2Safety precautions . . . . . . . . . . . 5Notes on the operating instructions . . . . . . . . . . . . . . . . . . 6Symbols used . . . . . . . . . . . . . . . . . . . . 6Example: menu input . . . . . . . . . . . . . . 6Verizon 200AM – more than just a telephone . . . . . 7First Steps . . . . . . . . . . . . . . . . . . . 7Pack contents . . . . . . . . . . . . . . . . . . . . 7Installing the base station . . . . . . . . . . 7Setting up the handset for use . . . . . . . 8Area codes . . . . . . . . . . . . . . . . . . . . . . 9Making calls . . . . . . . . . . . . . . . . 10Making an external call . . . . . . . . . . . 10Putting an external call on hold . . . . . 10Ending a call . . . . . . . . . . . . . . . . . . . . 10Answering a call . . . . . . . . . . . . . . . . . 10Caller ID . . . . . . . . . . . . . . . . . . . . . . . 10Handsfree operation . . . . . . . . . . . . . 10Operating the handset . . . . . . . . 11Control key . . . . . . . . . . . . . . . . . . . . . 11Display keys . . . . . . . . . . . . . . . . . . . . 11Returning to idle status . . . . . . . . . . . 12Menu guidance . . . . . . . . . . . . . . . . . 12Writing, editing, and correcting entries . . . . . . . . . . . . . . . . . . . . . . . . 12Using the directory and lists . . . 13Directory . . . . . . . . . . . . . . . . . . . . . . . 13Last number redial list . . . . . . . . . . . . 14Calls list . . . . . . . . . . . . . . . . . . . . . . . 14Operating the answermachine . . . . . . . . . . . . . . . . . . . . 16Operation using the base stationkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Operation using the handset . . . . . . . 16Setting up the answer machine . . . . . 19Operating when on the move(remote operation) . . . . . . . . . . . . . . . 20Using the network mailbox . . . . 21Configuring the network mailboxfor fast access . . . . . . . . . . . . . . . . . . . 21Using several handsets . . . . . . . 22Registering and de-registeringhandsets . . . . . . . . . . . . . . . . . . . . . . . 22Locating a handset ("paging") . . . . . . 22Changing the base station . . . . . . . . . 22Making internal calls . . . . . . . . . . . . . . 22Accepting/rejecting call waiting . . . . . 23Linking internal callers to an external call . . . . . . . . . . . . . . . . . . 23Handset settings . . . . . . . . . . . . . 24Changing the name of a handset . . . . 24Changing the display language . . . . . 24Setting the display contrast . . . . . . . . 24Activating/deactivating auto answer . 25Adjusting the loudspeaker and earpiece volume . . . . . . . . . . . . . . . . . 25Changing ring tones . . . . . . . . . . . . . . 25Activating/deactivating the key-touch tone . . . . . . . . . . . . . . . . . . 25Base station settings . . . . . . . . . 26System settings . . . . . . . . . . . . . . 26Restoring the default settings . . 27Appendix . . . . . . . . . . . . . . . . . . . 28Care . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Contact with liquid . . . . . . . . . . . . . . . 28Questions and answers . . . . . . . . . . . . 28Troubleshooting . . . . . . . . . . . . . . . . . 28Specifications . . . . . . . . . . . . . . . . . . . 29FCC / ACTA Information . . . . . . . . . . . . 30Safety precautions . . . . . . . . . . . . . . . 31Service (Customer Care) . . . . . . . . . . . 33End-user limited warranty . . . . . . . . . 33Index . . . . . . . . . . . . . . . . . . . . . . 37
5Safety precautionsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / security.fm / 9.6.08Safety precautions*) *) also see page 31! Only use the power supply unit supplied as indicated on the bottom of the device. Only insert approved rechargeable batteries of the same type. Never use ordinary (non-rechargeable) batteries, as they may pose a health hazard or cause injury. Do not charge the handset in the charging cradle or base station while the head-set is connected.Make sure the rechargeable battery is inserted in the correct direction.Use the battery specified in these operating instructions.The phone may affect medical equipment, so always turn your phone off before entering a hospital or doctor's office.Notice to Hearing Aid Wearers:This phone system is compatible with inductively coupled hearing aids.Do not operate the phone in places where there is a risk of explosion (such as paint workshops). Do not install the base station in the bathroom. The handset and base station are not splash-proof (see page 28).Drivers must not use the phone while driving. The phone must be turned off at all times in aircraft. Make sure the phone can-not be switched on accidentally. If you give your telephone to someone else, you should also provide the operat-ing instructions. Dispose of batteries and the phone carefully. Do not pollute the environment. Emergency numbers cannot be dialed if the keypad lock is activated! $‹Œƒ
6Notes on the operating instructionsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / notes-on-instructions.fm / 4.6.08Notes on the operating instructionsThis section explains the meaning of cer-tain symbols and typographical conven-tions used in this user guide.Symbols usedOn/Off (example) Select one of the two menu functions specified. ~Enter digits or letters. §Back§ The display keys' current func-tions are shown in reverse and are highlighted in the bottom display line. Press the display key below to launch the func-tion. qPress the top or the bottom of the control key: scroll up or down. c/ Q/ * etc. Press the corresponding key on the handset. Example: menu inputIn the user guides, the steps you need to perform are shown in abbreviated form. This is illustrated below using "Changing the display language" as an example.What you need to do is explained in the box.§Menu§ ¢Settings ¢Handset ¢Language ¢English/ Español/ Français¤With the handset in idle status, press the right display key to open the main menu. ¤Select Settings using the control key q – press the control key at the top or bottom.¤Press the §OK§ display key to confirm the function Settings.The Settings submenu is displayed.¤Press the bottom of the control key s repeatedly until Handset is selected.¤Press the §OK§ display key to confirm the function.The Handset submenu is displayed.¤Press the bottom of the control key s repeatedly until Language is selected.¤Press the §OK§ display key to confirm the function.The Language submenu is displayed.¤Select the language you want using the control key q – press the control key at the top or bottom.¤Press the §OK§ display key to confirm the selected language.The language is now changed for all text.
7Verizon 200AM – more than just a telephoneVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / starting.fm / 9.6.08Verizon 200AM – more than just a telephoneYour phone not only lets you store up to 50 phone numbers (page 13), it can do a whole lot more: uPhone directly using the base station: Your base station has the same keys as your handset. So nearly all functions you usually use on the handset are also available directly on the base station.uView missed calls on your phone (page 14).uECO DECT uses a power supply with low power consumption. Your handset reduces the transmission power depending on its distance from the base station (close-up range).Headset socketWhich headsets are compatible?Please call Verizon Service at 1-866-374-3864, or contact us at www.verizon.com for more information.Have fun using your new phone! First StepsPack contentsuOne Verizon 200AM base stationuOne telephone line corduOne AC adapter for the base stationuOne User GuideFor Verizon 200AM-1uOne Verizon 100H handset with bat-tery coveruTwo batteriesuOne belt clipFor Verizon 200AM-2uTwo Verizon 100H handsets with bat-tery coveruOne Verizon 100C charging cradleuOne AC adapter for the charging cradleuFour batteriesuTwo belt clipsInstalling the base stationThe base station is designed for use in closed, dry rooms in a temperature range of +41°F to +113°F. Set up the base station at a central point on the premises.Please note: uNever expose the phone to heat sources, direct sunlight, or other elec-trical appliances.uProtect your phone from moisture, dust, corrosive liquids, and vapors.Range and reception strengthRange: uUp to 984 feet in the openuUp to 165 feet in buildingsReception strength:The display shows if the handset is linked to the base station:uÄ is on: handset is linked to the base station. uÄ flashes: no reception; handset is out of range or not registered.Note: The transmission power of the base station is lowered to its minimum level when the hand-set is placed in the base station and only one handset is registered on the base station.Caution: Do not charge the handset in a charging cradle or base station while the headset is connected.
8First StepsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / starting.fm / 9.6.08Connecting the base station¤First connect the power adapter and then the phone jack as shown below.1 110-V power adapter2 Back of the base station3 Phone jack with phone cordPlease note: uThe power adapter must always be connected, as the phone will not oper-ate without an electrical supply.uYour answer machine is set to give a standard announcement.Setting up the handset for useInserting the batteries ¤Open the battery cover.¤Insert the batteries according to the correct polarity (see diagram).¤Close the cover, and press the top so that it clicks into place.Attaching the belt clipThere are notches for attaching the belt clip on the side of the handset at the same height as the display.¤Press the belt clip onto the back of the handset so that the protrusions on the belt clip engage the notches.Placing the handset in the base station ¤Place the handset in the base station with the handset's display facing out-wards. Charging the batteries for the first time¤To charge the batteries, leave the hand-set in the base station or charging cra-dle continuously for ten hours.The alternately flashing battery icons = U on the upper right side of the display screen indicate that the batteries are being charged.Caution: Use only rechargeable UL-approved AAA bat-teries. Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. For example, the batteries could explode. The phone could also malfunc-tion or be damaged as a result of using batter-ies that are not of the recommended type.Note: If attached, remove the belt clip before open-ing the battery cover.123
9First StepsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / starting.fm / 9.6.08For questions and troubleshooting, see page 28.Setting the date and timeYou should set the date and time, for example, to ensure the correct time of incoming calls is recorded.To change the time and date, open the input field using:§Menu§ ¢s ¢Settings ¢Date/Time ¢Set Date/Time~Enter the time and date with 10 digits, for example, Q M 1 5 Q 1 1 5 Q N for January 15, 2008, 07:15 am. If the 12-hour time format is set, use the * key to switch between am and pm.To correct an incorrect entry, overwrite the character by typ-ing the correct one.§OK§ Press the display key to save changes.You can change the date and time format:§Menu§ ¢s ¢Settings ¢Date/Time ¢Set Format¤Choose between day/month and month/day date formats:s ¢Date Format ¢DD/MM/MM/DD¤Choose between 12- and 24-hour time formats:s ¢Time Format ¢12 Hours/24 HoursArea codesTo make a call using the Incoming Calls list (page 14), your phone's area code must be stored.§Menu§ ¢s ¢Settings ¢System ¢Area Code~Enter your area code and press §OK§.Display in idle statusOnce the phone is registered and the time set, the idle display looks as shown here (example). If the answer machine is acti-vated, the header will also display the ans-wer machine symbol Õ.Your phone is now ready to use. Note:– If the handset has turned itself off because its batteries are empty, and you then place the handset into the base station, it will turn on automatically.– Only place the handset into the base sta-tion or charging cradle specifically intended for it.– During handset operation, the battery icon e indicates the charge status of the bat-teries (page 1).– The batteries may feel warm when they are charging. This is not dangerous.ÄÕ e INT 1 01/31 09:45 §§§§Menu§§§§
10Making callsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / telefony.fm / 9.6.08Making callsMaking an external callExternal calls are calls using the outside telephone network.~c Enter the number and press the Talk key c or Handsfree key d. To cancel the dialing operation, press the End Call key a.You are shown the duration of the call while the call is in progress.Putting an external call on holdj Press the Int/Hold key.The external call is put on hold.Ending a calla Press the End Call key.Answering a callThe handset indicates an incoming call in three ways: by ringing, by a display on the screen, and by the flashing Talk key c. You can accept the call by:¤Pressing the Talk key c.¤Pressing the Handsfree key d. If the handset is in the base station or charger and the Auto Answer function is activated (page 25), the call will be answered automatically when you lift the handset from the base station or charger.You can press the §Quiet§ display key to mute the ring tone without answering the call. You can answer the call as long as the call is shown on the display.Caller IDCaller ID (CID) is an optional subscription service provided by your telephone serv-ice provider. This feature supplies incom-ing caller identification information that will be displayed on your handset.Call display with Caller ID/NameIf the number of the caller is stored in your directory, you will see the caller's name.The following is displayed in place of the number:uExternal, if no number is transmitted or the caller has not subscribed to Caller ID.uWithheld, if the caller has withheld Caller ID.Handsfree operationYou can activate the speakerphone at any time to provide handsfree operation dur-ing a call.Activating/deactivating handsfreeActivating while dialing ~d Enter the number and press the Handsfree key.¤You should inform your caller before you use the handsfree function so that the caller knows someone else is listen-ing. Switching between the earpiece and the handsfree modedPress the Handsfree key.During a call and when listening to the answer machine, turn handsfree on or off.To adjust the volume, see page 25. Note:Dialing using the directory (page 13) or Calls list (page 14) saves time re-entering numbers.
11Operating the handsetVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / telefony.fm / 9.6.08Operating the handsetActivating/deactivating the handsetaPress and hold the End Call key.Activating/deactivating the keypad lock# Press and hold the pound key. Keypad Locked appears in the display when the keypad lock is activated. The keypad lock is deactivated automati-cally if someone calls you. It is re-activated when the call is finished.Control key1Control keyIn the description below, the side of the Control key (up, down), which you must press depending on the operating situation, is marked in black, for example, t for "press up on the Control key". The Control key has different functions:When the handset is in idle status s Open the directorytOpen call log list (page 14)In input fieldsYou can use the Control key to move the cursor backwards t or s forwards.In the main menu, lists and submenus t/ s Scroll up/down line by line.When the handset is off the hook or when the answer machine is playingt/ s Increase/decrease volumeDisplay keysThe function of the display keys changes depending on the particular operating sit-uation. Example: 1 The display keys' current functions are shown on the bottom display line.2 Display keysThe most important display symbols are:§§§§§Menu§§§§ Open the main menu (in idle mode) or the context-depend-ent menu.§§§§§Back§§§§ Go back one menu level.§§§§§§§OK§§§§§§§ Confirm your choice or save edited characters.§§§§Clear§§§§§ Clear key: deletes one charac-ter at a time from right to left (press briefly), or deletes all characters (hold).1§§§§§Back§§§§§ † §§§§Menu§§§§§12
12Operating the handsetVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / telefony.fm / 9.6.08Returning to idle statusYou can return to idle status from any-where in the menu as follows:¤Press the End Call key a.Or:¤Do not press any key: after 2 minutes, the display will automatically return to idle status.Changes that you have not confirmed or saved by pressing §OK§ will not be saved.An example of the display in idle status is shown on page 9. Menu guidanceYour phone's functions are accessed using a menu that has a number of levels. Main menu (first menu level) ¤Press the display key §Menu§ with the handset in idle status to open the main menu.The main menu functions are shown on the screen in a list. To access a function, open the corre-sponding submenu (next menu level):¤Navigate to the function using the con-trol key q.¤Press the §OK§ display key. Submenus The functions in the submenus are dis-played as lists. To access a function:¤Scroll to the function with the control key q and press §OK§. Pressing the §Back§ display key returns you to the previous menu level. a cancels the operation.Writing, editing, and correcting entriesCorrecting incorrect entriesYou can correct incorrect characters in text by navigating to the incorrect entry using the Control key. You can then:uPress §§§§Clear§§§§§ to delete the character to the left of the cursor. uInsert characters by typing.Writing and editing namesThe following rules apply when creating an entry:uControl the cursor with q.uPress the pound key # to switch between uppercase and lowercase.Entering special characters You can enter special characters using the Q or 1 keyQ .0,/:;"’!?*+-%\^~|1 SPACE1@_#=<>()&$[]{}
13Using the directory and listsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / direct_charges.fm / 9.6.08Using the directory and listsThe options are: uDirectory uLast Number Redial list uCalls listYou can store a maximum of 50 entries in the directory. Each entry must consist of a name and a number.The directory is stored in the base station and is shared by all registered handsets.DirectoryIn the directory, you can store phone numbers and the names associated with them.¤With the handset in idle status, open the directory by pressing the s key. Length of entriesNumber: max. 24 digits Name: max. 16 characters Storing a number in the directorySaving the first entry in the directoryWhile your handset is in idle mode:~ Enter the number and press §Save§. ~ Enter the name and press §OK§.~ Correct the number, if neces-sary, and press §OK§.Saving additional entries in the directorys ¢§Menu§ ¢New Entry~ Enter the name and press §OK§.~ Enter the number and press §OK§.You can use the Clear key to delete one character at a time from right to left (press briefly) or all characters (press and hold).Selecting a directory entrysOpen the directory.You have the following options:uUse q to scroll to the entry until the desired name is selected. uEnter the first character of the name, or scroll to the entry with s, if necessary. Dialing with the directorys ¢q(Select entry)cPress the Talk key. The number is dialed. Managing entries in the directorys ¢q(Select entry)Viewing an entry §Menu§ ¢ViewThe entry is displayed. Go back with §Back§.Editing entries §Menu§ ¢Edit Entry~ Edit the name and press §OK§.~ Edit the number and press §OK§.You can use the Clear key to delete one character at a time from right to left (press briefly) or all characters (press and hold).Deleting entries§Menu§ ¢DeleteDelete the displayed entry.Or: §Menu§ ¢Delete List¤Confirm question Delete? by pressing §OK§.All entries in your directory will be deleted.
14Using the directory and listsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / direct_charges.fm / 9.6.08Adding a displayed number to the directoryNumbers that appear in a list, such as the Calls list or the Last Number Redial list , can be added to the directory. If you have Caller ID and the name is transmitted, the first 16 characters of the transmitted name are copied to the name line. A number is displayed: §Menu§ ¢Copy To Dir.¤Complete the entry as described in the section "Storing a number in the direc-tory" (see page 13). Last number redial listThe Last Number Redial list contains the ten numbers last dialed with the handset (max. 32 digits). If one of the numbers is in the directory, then the corresponding name will be displayed. Manual last number redialkPress the key. qSelect the entry. c/d Press the Talk key or the Handsfree key. The number is dialed.When displaying a name, you can have the respective phone number displayed:§Menu§ ¢ViewManaging entries in the Last Number Redial listkPress the key. qSelect the entry. §Menu§§ Open menu.The following functions can be selected with q: View (as in the directory, page 13) Copy To Dir. Copy an entry to the directory (page 14)Delete (as in the directory, page 13) Delete List (as in the directory, page 13) Calls list Requirement: Caller ID Presentation (CIP, see page 10)The numbers of the last 10 incoming calls are stored. ¤With the handset in idle status, open the directory by pressing the t (CID) key. Dialing with the Calls listt ¢q(Select entry)If necessary, press the * key to change the number format for dialing.c/dPress the Talk key or the Handsfree key. The number is dialed.Viewing an entryt ¢q(Select entry)§Menu§ ¢ViewThe entry is displayed. Go back with §Back§.
15Using the directory and listsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / direct_charges.fm / 9.6.08List entryNew messages are at the top. A list entry contains the following information:uList type (in header) uStatus of entry (new entries are marked with a star in the header)uName of caller, if name is transmitted through CID or stored in the directoryCaller's phone number, if only the num-ber is transmittedExternal, if no number is transmitted, or the caller has not subscribed to Caller IDWithheld, if the caller has withheld Caller IDYou can add the number of the caller to the directory (page 14).uDate and time of call (if set, page 9)You can manage the entries in the same way as the entries in the Last Number Redial list (see page 14).
16Operating the answer machineVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / answering_m+network-mailbox.fm / 9.6.08Operating the answermachineYou can operate the base station's answer machine using the handset, using the key-pad of the base station (page 2), or using remote operation (from another phone/cell phone).Announcement modeYou can use the answer machine in two different modes. uIn Answer & Rec. mode, the caller hears your announcement and can then leave a message. uIn Answer Only mode, the caller hears your announcement but cannot leave a message.Operation using the base stationkeysYou can use the base station keys for the most commonly used functions of your answer machine. For more information, see page 2.Status of the answer machineThe LED in the Start/Stop key and the sym-bols in the display of the base station indi-cate the status of the answer machine.The LED in the Start/Stop keyuIs on when playing messages.uFlashes slowly when there is at least one new message on the answering machine.uFlashes rapidly when the message memory is full.The display of the base station may show the symbols shown here:Operation using the handsetMost of the functions described are also available using the keys and the display of your base station.Call screeningWhile recording a message, you can auto-matically listen through the loudspeakers of the base station, if you have activated call screening (see page 19).You can also listen through the loudspeak-ers of registered handsets:§Screen§ Press the display key.The handset loudspeaker is activated. You can switch it off with the handsfree key d. Éflashes The message memory is full.Õ is on The answer machine is on.× flashes The answer machine is con-trolled by a handset.Åis on The ring tone volume of the base station is set to zero (see page 26).ÕÉ×Å SUN 09:23 AM 01/31§§§§§§§§§Menu§§§§§§§§§
17Operating the answer machineVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / answering_m+network-mailbox.fm / 9.6.08Switching the answer machine on/off§Menu§ ¢Answer Machine ¢Ans On/Off ¢On/Off§OK§ Press the display key to acti-vate/deactivate the answer machine.The × icon is displayed on the screen.The phone includes a prerecorded announcement for the answer and record mode and announce-only mode. If a per-sonal announcement has not been recorded, the corresponding prerecorded announcement is used. Recording a personal announcement/announce only§Menu§ ¢Answer Machine ¢Record OGMAnswer & Rec./Answer Only §OK§Select the mode in which you want to record the personal announcement.Record §OK§ Press the display key to start recording.You will hear the ready tone (short tone).¤Now record your announcement (must be at least 3 seconds long).§OK§ Press the display key to end the recording.The recorded announcement will be played back automatically. You can record the announcement again by repeating these steps.Please note:uRecording ends automatically if the maximum recording time of 60 sec-onds has been reached.uIf you cancel the recording, the prere-corded announcement will be used.uThe recording is canceled if the answer machine memory is full.¤If necessary, delete old messages and repeat the recording.Playing back announcements§Menu§ ¢Answer Machine ¢Record OGMAnswer & Rec./Answer Only §OK§Play §OK§ Press the display key to start playback.If a personal announcement has not been recorded, the corresponding prerecorded announcement is used.Deleting announcements§Menu§ ¢Answer Machine ¢Record OGMAnswer & Rec./Answer Only §OK§Delete §OK§ Press the display key to delete the personal announcement. If no personal announcement exists, you will hear an error tone.After deletion, the corresponding prere-corded announcement will be used. Selecting an announcement modeYou can choose between Answer & Rec. and Answer Only. §Menu§ ¢Answer Machine ¢Answer ModeAnswer & Rec./Answer Only §OK§The selected mode is saved even after the answer machine is deactivated.Note:When recording your announcement, speak directly into the handset's microphone, as if talking on the phone. You can also use the base station to record announcements or memos.Note:If the message memory is full when in Answer & Rec. mode, the selection is interrupted and you will receive instructions to delete old mes-sages.¥Delete old messages.The answer machine automatically switches back to the mode set once deletion is com-plete, or you can select another recording mode.
18Operating the answer machineVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / answering_m+network-mailbox.fm / 9.6.08Playing back messagesThe date and time of each message is logged (provided this has been set, page 9) and displayed during playback.Playing back new messagesNew messages you have not yet listened to are indicated by the slowly flashing LED in the Start/Stop key (see page 2).§Play§ Press the display key to start playback.The following example shows a display of a handset when playing back new mes-sages:1 Date when message was recorded.2New: you have not yet listened to the mes-sage.301/02: The first of two messages is played.4 Time when message was recorded.If you have...uNew messages:New (2) is displayed. The number of messages (3) indicates only the number of new messages: actually, the first of two new messages is played back.uMessages that you have already lis-tened to:New (2) is not displayed. The number of messages (3) only indicates the number of old messages: 01/02 means that the first of two old messages is dis-played.uNo messages:No Messages appears on the display screen.An announcement tells you if there are any new messages, just old messages, or no messages.If there are new messages, playback begins with the first new message. After the last new message, you will be returned to the Play menu.After a new message has been played completely, its status becomes "old".If the message concerned has been saved with the date and time, you will hear an appropriate announcement before play-back begins.Playing back old messagesYou can listen to old messages if there are no more new messages.Menu§ ¢Answer Machine ¢Play§OK§ Press the display key to start playback.Controlling playback During message playback:§Menu§ Press the display key to enter the Options menu.uRepeatRepeat playback of actual message.uNext/PreviousJump to playback of the following or previous message.uDeleteDelete current message.Play New 01/0201/31 09:45 AM2134§§§§§Back§§§§§ U§§§§Menu§§§§Play 01/0201/31 09:45 AM§§§§§Back§§§§§ U§§§§Menu§§§§Play No Messages
19Operating the answer machineVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / answering_m+network-mailbox.fm / 9.6.08Deleting messagesYou can delete old messages all at once or individually. Deleting all old messages§Menu§ ¢Answer Machine ¢Delete Old MsgsDelete? §OK§ Press the display key to con-firm you want to delete all old messages.If you have no old messages, you will hear an error tone and No Messages will display on the screen.Deleting individual old messagesDuring playback:§Menu§ ¢Delete§OK§ Press the display key to delete the current message.Picking up a call from the answer machineYou can pick up a call while the answer machine is recording a message or being operated remotely:cPress the Talk key.Recording stops and you can speak to the caller.If two seconds of the call have already been recorded when you pick it up, the call will be displayed as a new message.You can accept the call on any handset. If you use call screening on a handset, only that handset can pick up the call.Recording a memoYou can record a memo on your answer machine (e.g., to leave a message for other members of your family). It will be signaled like a new message on your answer machine.§Menu§ ¢Answer MachineRecord Memo §OK§Press the display key to start playback.You will hear the ready tone (short tone).¤Now record your memo (it must be at least 3 seconds long).§OK§ Press the display key to end the recording.Recording ends automatically if the maxi-mum recording time of 3 minutes has been exceeded.Setting up the answer machineThe answer machine has already been preconfigured at the factory. Change indi-vidual settings using the handset or the corresponding keys on the base station.Activating/deactivating call screeningWhile recording a message, you can listen through the loudspeakers of registered handsets and the base station.§Menu§ ¢Answer Machine ¢Settings ¢Call ScreeningIf you use the handset for this setting:Base/HandsetSelect if you want to make the setting for the handset or the base station.On/Off Press the §OK§ display key to confirm your selection.The default setting for the base station is On; the default setting for the handset is Off.For call screening on the handset:§Screen§ Press the display key to start call screening.
20Operating the answer machineVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / answering_m+network-mailbox.fm / 9.6.08Toll-Saver Mode - Call acceptance/charge saving function for remote operationYou can set when you want the answer machine to respond to calls.The options are: 2 Rings, 4 Rings, 6 Rings, 8 Rings, as well as the cost-saving setting Toll Saver. When Toll Saver is set, the following deter-mines when the answer machine accepts calls: uIf no new messages are present, the answer machine accepts calls after 4 Rings.uIf new messages are present, the answer machine accepts calls after 2 Rings.When operating remotely, you know there are no new messages after hearing 2 rings (otherwise the answer machine would have already accepted your call). There will be no call charges if you hang up now.§Menu§ ¢Answer Machine ¢Settings ¢Ring Delay ¢2 Rings/4 Rings/6 Rings/8 Rings/Toll Saver§OK§ Press the display key to con-firm your selection.Changing the language of voice prompts and prerecorded announcementsYou can select English, Spanish, or French as the language of voice prompts and pre-recorded announcements.§Menu§ ¢Answer Machine ¢Settings ¢Voice Language ¢English/Español/Français§OK§ Press the display key to con-firm your selection.Operating when on the move(remote operation)You can check or activate the answer machine from any other telephone (hotel, pay phone, etc.).Requirements: uThe phone you are using for remote operation must have tone dialing (DTMF), so that you hear different tones when you press the keys.uYou must activate Remote Access.Activating Remote Access§Menu§ ¢Answer Machine ¢Settings ¢Remote Access ¢On/Off§OK§ Press the display key to con-firm your selection.Calling the answer machine and playing back messages~ Dial your own number. ;~ While listening to your announcement, press the ; key and enter the system PIN. You will be informed whether any new messages have been recorded. The mes-sages are then played back. You can now operate the answer machine using the keypad.Note:The number of rings refers to the ring tones of the base station. If you have selected another ring tone, the number of rings you hear may differ from the selected number of rings.
21Using the network mailboxVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / answering_m+network-mailbox.fm / 9.6.08Operating the answer machine using the keypadThe following keys are used: Activating the answer machine~ Dial your own number. ¤Allow the phone to ring until the ring back tone stops and the phone answers.~ Enter system PIN.G Press the G key. You will hear a beep. Your answer machine is now activated and the acti-vated announcement is played back. Deactivating the answer machine~ Dial your own number. ;~ While listening to your announcement, press the ; key and enter the system PIN. 9 Press the 9 key. You will hear a beep. Your answer machine is now deactivated.Using the network mailboxThe network mailbox is your network pro-vider's answer machine within the net-work. You cannot use the network mail-box unless you have requested it from your network provider. Configuring the network mailboxfor fast accessEntering the network mailbox number§Menu§ ¢Voice Mail ¢Settings~ §OK§ Enter the number of the network mailbox and press §OK§.The setting for fast access applies to all handsets.If your network voice mail requires a pass-word for access, it is possible to add a password by entering pauses immediately after entering the mailbox access number, then entering your password. Calling your network mailboxfPress the f key briefly. You are connected directly to the network mailbox. If you have new messages in your network mailbox:§Call§ Press the display key to call your network mailbox.dPress Handsfree key d, if required. You hear the net-work mailbox announcement.For further operation steps, please refer to the instructions provided by your mailbox operator.0 Delete the current message.A Repeat the previous message.B Play the message.3 Skip to the next message.G Turn on the answering machine.H Stop message playback.9 Turn off the answering machine.; Enter the remote access code if the answering machine is on.Note:After message playback, if no key operation is detected for 10 seconds, the call will be terminated.
22Using several handsetsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / registr_sett.fm / 9.6.08Using several handsetsRegistering and de-registeringhandsetsYou can register up to six handsets with your base station.A Verizon 100H handset can be registered with up to four base stations. Registering the Verizon 100H handsetOn the handset§Menu§ ¢Settings ¢Registration ¢Register HSqSelect the base you want to register your handset with and press §OK§. Bases that have been registered will be marked by ½.~ Enter your PIN and press §OK§.The handset will be registered.On the base stationWithin 60 secs. press and hold the regis-tration/page key on the base station (see page 2) (approx. 5 secs.). De-registering handsetsYou can de-register any registered handset from your Verizon 200AM.§Menu§ ¢Settings ¢Registration ¢Unregister HS~Enter your PIN and press §OK§.QSelect the handset you want to de-register and press §OK§.§OK§ Press the display key to con-firm deletion.Locating a handset ("paging")You can locate your handset using the base station. ¤Press the Registration/Paging key on the base station briefly.¤All handsets will ring at the same time ("paging"), even if the ringers are switched off.You can press the display key §Quiet§ to mute the ring tone without answering the call. Ending paging¤Briefly press the Registration/Paging key on the base station or press the Talk key c on the handset.Changing the base stationIf your handset is registered to more than one base station, you can set it to a partic-ular base station or to the base station that has the best reception (Best Base).§Menu§ ¢Settings ¢Registration ¢Select BaseqSelect one of the registered base stations or Best Base and press §OK§.Making internal callsInternal calls to other handsets registered with the same base station or to the base station are free.jInitiate internal call. qSelect the handset or the base station you want to call and press §OK§.Ending a calla Press the End Call key.Note:If only one handset is registered to the base, the internal call will be established immedi-ately after pressing the j key.
23Using several handsetsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / registr_sett.fm / 9.6.08Transferring a call to another handsetYou can transfer an external call to another handset (connect) or to the base station.¤Initiate an internal call to the handset or the base station you want to transfer the call to (see above).Attended call transferWhen the internal party answers:¤If necessary, announce the external call. a Press the End Call key.The external call is transferred to the other handset or the base station. If the internal party does not answer, press the §End§ display key to return to the external call. If the internal party is busy, you will hear the busy tone and return automatically to the external call.Unattended call transfera Press the End Call key.The external call is directly transferred to the other handset. Then, if the internal party does not answer, the call will automatically return to you (the display will show External Call).Hold while making internal callWhen you are speaking to an external party, you can simultaneously call an internal party. ¤Initiate an internal call as described in the section "Making internal calls" (see page 22).The external party hears the hold melody.Use the j key to switch between the internal and external parties.Ending the internal call¤Ask the other internal party to end the call.You are reconnected to the external caller.Accepting/rejecting call waitingIf you receive an external call while con-ducting another external or internal call, you will hear the call waiting tone (short tone). The caller's number or name will appear on the screen if caller ID is ena-bled.Call waiting while conducting an internal callaPress the End Call key to end the internal call.¤Answer the external call as described in the section "Answering a call" (see page 10).You are connected to the waiting call.Call waiting while conducting an external call§Accept§ Press the display key to answer the incoming external call.The actual call is put on hold. You are con-nected to the waiting call. You have the following options:–Press the Talk key c to switch between the callers. – Press End Call key a to end the call with the online party. Or:aPress the End Call key to end the existing external call.¤Answer the external call as described in the section "Answering a call" (see page 10).You are connected to the waiting call.Linking internal callers to an external callImportant: The Listening In function must be activated. You are conducting an external call. An internal caller can listen in on this call and take part in the conversation. The other
24Handset settingsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / registr_sett.fm / 9.6.08parties are made aware of additional lis-teners by a signal tone. Activating/deactivating Listening In§Menu§ ¢Settings ¢System ¢Listening In ¢On/OffDefault setting is On.Internal conference callThere are two ways to start an internal conference call:uAnother handset can join the call using Listening InuYou can call another handset using the j key, and then add it to a confer-enceJoining the call using Listening InThe line is engaged with an external call. You want to listen in on the existing external call.c/d Press the Talk key or Handsfree key briefly.When you join the call, the other parties hear a signal tone. On both handsets, you will see Conference on the display.Calling another handset and adding it to the conference¤Initiate an internal call as described in the section "Making internal calls" (see page 22).When the called handset has answered the call:§Conf.§ Press the display key to start the conference call.On both handsets, you will see Conference on the display.Ending conference calla Press the End Call key.The other parties hear a signal tone.If the first internal party presses the End Call key a, the handset/base station that has entered the conference call remains connected to the external caller. Handset settings Your handset is preconfigured, but you can change these settings to suit your individual needs.Changing the name of a handsetThe names "INT 1", "INT 2", etc., are assigned automatically during registra-tion. You can change these names. The number of the handset, however, never changes. The changed name is only dis-played on this handset.§Menu§ ¢Settings ¢Handset ¢Handset Name~Enter the name and press §OK§.The name must not exceed 12 characters.Changing the display languageYou can view the display texts in different languages.§Menu§ ¢Settings ¢Handset ¢Language ¢English/ Español/ FrançaisqSelect a language and press §OK§. Setting the display contrastYou have a choice of five different contrast levels.§Menu§ ¢Settings ¢Handset ¢Display ContrastqSelect your preferred level and press §OK§.
25Handset settingsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / registr_sett.fm / 9.6.08Activating/deactivating auto answerIf you have activated this function, when you get a call, you can simply lift the hand-set out of the base station without having to press the Talk key c.§Menu§ ¢Settings ¢Handset ¢Auto Answer ¢On/OffAdjusting the loudspeaker and earpiece volumeYou can set the loudspeaker volume and earpiece volume to five different levels. You can only make these adjustments dur-ing a call. The handsfree volume can only be adjusted when this function is set.You are conducting a call.qIncrease or decrease the vol-ume.Changing ring tonesTo set the ring tones of the base station, see page 26.VolumeYou can choose between five volumes (1–5; for example, volume 4 = ˆ). §Menu§ ¢Settings ¢Audio Settings ¢HS Ring VolumeqSelect the volume and press §OK§. Ring tonesYou can choose between 15 different mel-odies. §Menu§ ¢Settings ¢Audio Settings ¢HS Ring TonesqSelect your preferred melody and press §OK§. Activating/deactivating the ring toneYou can deactivate the ring tone on your handset before you answer a call or when the handset is in idle status; the ring tone can be deactivated permanently or just for the current call.Deactivating the ring tone permanently*Press and hold the star key.The Åicon appears in the display.Reactivating the ring tone*Press and hold the star key.Deactivating the ring tone for the current call§Quiet§ Press the display key.Deactivating the ring tone during an incoming callsPress the key until you no longer hear the ring tone. Activating the ring tone during an incoming calltPress the key until the ring tone volume reaches the desired level. Activating/deactivating the key-touch toneEach key press is acknowledged by a beep. You can deactivate this function:§Menu§ ¢Settings ¢Audio Settings ¢Key Touch Tone ¢On/Off
26Base station settingsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / registr_sett.fm / 9.6.08Base station settingsUse the keys on the base station to enter these settings.Setting the display contrastYou have a choice of five different contrast levels.§Menu§ ¢Settings ¢Base ¢Display ContrastqSelect your preferred level and press §OK§. Changing the display languageYou can view the display text in different languages.§Menu§ ¢Settings ¢Base ¢Language ¢English/ Español/ FrançaisqSelect a language and press §OK§. Changing ring tone volume¤Use the volume keys ð and ñ on the base station to adjust the volume of the base station ring tone.Changing ring tone melodiesYou can use a registered handset Verizon 100H or the keys on the base station to enter this setting.You can choose between five different melodies. §Menu§ ¢Settings ¢Audio Settings ¢Base Ring TonesqSelect your preferred melody and press §OK§. System settingsThe following base station settings can only be carried out using a registered Verizon 100H handset.Protecting against unauthorizedaccessProtect the system settings of the base sta-tion with a PIN known only to you. The system PIN must be entered when regis-tering/de-registering a handset with/from the base station.Changing the system PINYou can change the 4-digit system PIN set on the base station (default setting: 0000) to a 4-digit PIN known only to you.§Menu§ ¢Settings ¢System ¢Change PIN~Enter the old PIN and press §OK§.~Enter the new PIN and press §OK§.~To confirm, enter the new PIN again and press §OK§.Settings for connecting the base station to the PABXThe following settings are only needed when your PABX requires them. Please refer to the user guide of your PABX.Changing the dialing modeThe following dialing modes can be selected:uTone dialing (DTMF)uPulse dialing (DP)§Menu§ ¢Settings ¢System ¢Dialing Mode ¢Tone/PulseqSelect dialing mode and press §OK§.Caution:Do not forget the new system PIN! If you forget it, you must reset your phone to the default settings (see below).
27Restoring the default settingsVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / registr_sett.fm / 9.6.08Setting the flash time §Menu§ ¢Settings ¢System ¢Flash Time ¢Short/LongqSelect flash time (Short = 80 ms, Long = 650 ms) and press §OK§.Switching temporarily to tone dialing (DTMF)If your PABX still operates with pulse dial-ing (DP), but you need tone dialing (DTMF) for a connection (for example to listen to the network mailbox), you must switch to tone dialing for the call.Requirement: You are conducting a call or have already dialed an external number.§Menu§ ¢Tone Dialing§OK§ Press the display key to con-firm.Tone dialing is now activated for this call only.Restoring the default settingsYou can restore the default values for most settings. When resetting, all hand-sets remain registered and the directory will not be deleted.¤Carry out the following on a registered Verizon 100H handset!§Menu§ ¢Settings ¢System ¢Reset§OK§ Press the display key to con-firm reset.
28AppendixVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / appendix.fm / 9.6.08AppendixCare¤Wipe the base station and handset with a damp cloth (do not use solvents) or an antistatic cloth. Never use a dry cloth. This can cause static. Contact with liquid If the handset has come into contact with liquid:1. Immediately switch the handset off and remove the batteries. 2. Allow the liquid to drain from the hand-set.3. Pat all parts dry, then place the hand-set, with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave oven, convection oven, etc.).4. Do not switch on the handset again until it has completely dried.When it has fully dried, you should be able to use it again normally.Questions and answersIf you have any questions about the use of your telephone, you can contact us any time at www.verizon.comThe table below (page 28) contains a list of common problems and possible solu-tions.Troubleshooting!The display is blank. 1. The handset is not switched on.¥Press a and hold the End Call key.2. The batteries are empty.¥Charge or replace the batteries (page 8).The handset does not respond to a key press. The keypad lock is activated.¥Press and hold the pound key # (page 1).Base Search and Ä is flashing on the display screen.1. The handset is outside the range of the base station.¥Reduce the distance between handset/base station.2. The handset has been de-registered. Please Register is flashing on the display screen.¥Register the handset (page 22).3. The base station is not switched on.¥Check the base station power cord (page 8).Handset does not ring.The ring tone is switched off.¥Activate the ring tone (page 25).You cannot hear the ring/dialing tone. Base station's phone cord has been replaced.¥When purchasing a new cord, make sure that it has the correct pin connections.¥Correct phone jack assignment.3 214 5 6 1unused2unused3a4b5unused6unused
29AppendixVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / appendix.fm / 9.6.08SpecificationsRecommended batteriesNickel-metal hydride (NiMH):The handset is supplied with the author-ized AAA batteries.Handset operating times/charging timesThe operating and charge times apply only when using the recommended batteries.Base station power consumptionIn standby mode: approx. 1.5 wattsDuring a call: approx. 2 wattsGeneral specificationsThe other party cannot hear you. You have pressed the i (INT) key. The hand-set is on hold.¥Switch the microphone on again (page 1).The incoming call number is not displayed although CID is set.Caller ID is not enabled.¥The caller must ask the network provider to activate Caller ID (CID).You hear an error tone when keying an input.Action has failed/invalid input. ¥Repeat the operation. Watch the display and refer to the operating instructions, if necessary.You cannot listen to messages left on the network mailbox.Your phone system is set for pulse dialing.¥Set your phone system to tone dialing.The Calls list does not indicate the correct time messages were received. The date/time is not set.¥Set the date/time (page 9).You hear an error beep from the answer machine during remote operation. The system PIN entered is incorrect. ¥Enter the system PIN again. You cannot operate the answer machine using remote operation. Remote Access is not activated.¥Activate Remote Access (see page 20)The answer machine does not record mes-sages/has switched to "announce only". Its memory is full.¥Delete old messages.¥Play back new messages and delete.Capacity 550 mAhStandby time Approx. 130 hours (5.5 days)Talk time Approx. 10 hoursCharge time Approx. 10 hoursDECT 6.0 is supportedNo. of channels 60 duplex channelsRadio frequency range 1920–1930 MHzDuplex method Time multiplex, 10-ms frame lengthChannel grid 1728 kHzBitrate 1152 kbit/sModulation GFSKLanguage code 32 kbit/sTransmission power10 mW, average power per channelRange Up to 984 feet outdoors, up to 165 feet indoorsBase station power supply 110 V ~/60 HzEnvironmental operating condi-tions+41°F to +113°F; 20% to 75% relative humidityDialing mode DTMF (tone dialing)/DP (pulse dialing)
30AppendixVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / appendix.fm / 9.6.08FCC / ACTA InformationWarning: Changes or modifications to this unit not expressly approved by Siemens Cordless Products could void the FCC authority to operate the equipment. This includes the addition of any external antenna device.This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of the base station is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network nust comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product iden-tifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN with-out a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.If this equipment causes harm to the telephone network, the telephone company will notify you in advance, that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a com-plaint with the FCC if you belive it is necessary.The telephone company may make changes in its facilities, equipment, operations or proce-dures that could affect the operation of the equipment. If this happens the telephone com-pany will provide advance notice in order for you to make necessary modifications to main-tain uninterrupted service. If you experience trouble with this telephone system, disconnect it from the network until the problem has been corrected or until you are sure that the equip-ment is not malfunctioning.If trouble is experienced with this equipment, for repair or warranty information, please con-tact Verizon Support at 1-866 374 3864. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. This equipment is of a type that is not intented be repaired by the Customer (user).This telephone system may not be used on coin service provided by the telephone company. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or cor-poration commission for information. Privacy of communications may not be ensured when using this phone.If your home has specially wired alarm equip-ment connected to the telephone line, ensure the installation of this equipment does not dis-able your alarm equipment. If you have ques-tions about what will disable alarm equipment, consult your telephone company or a qualified installer.This telephone system equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired opera-tion. These limits are designed to provide reasonable protection against harmful interfer-ence in a residential installation. Some cordless telephones operate at frequencies that may cause interference to nearby TV’s and VCR’s; to minimize or prevent such interference, the system base should not be placed near or on top of a TV or VCR; and, if interference is expe-rienced, moving the base farther away from the TV or VCR will often reduce or eliminate the interference. However, there is no guarantee that interfer-ence will not occur in a particular installation. If this telephone system does cause harmful interference to radio or television reception, which can be determined by turning the system off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the base station and receiver.
31AppendixVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / appendix.fm / 9.6.083. Connect the base station into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio TV technician for help.Notice for Direct Inward Dialing ("DID")ALLOWING THIS EQUIPMENT TO BE OPERATED IN SUCH A MANNER AS TO NOT PROVIDE FOR PROPER ANSWER SUPERVISION AS A VIOLATION OF PART 68 OF THE FCC‘S RULES.Notice to Hearing Aid Wearers: This phone system is compatible with induc-tively coupled hearing aids.Power Outage: In the event of a power outage, your cordless telephone will not operate. The cordless tele-phone requires electricity for operation. You should have a telephone that does not require electricity available for use during power out-ages.Notice: The installation of the base unit should allow at least 8 inches between the base and persons to be in compliance with FCC RF exposure guidelines.For body worn operation, the portable part (handset) has been tested and meets FCC RF exposure guidelines. Use with an accessory that contains metal parts may not ensure com-pliance with FCC RF exposure guidelines.Notice to telephone company service:If you need service from your telephone com-pany, please provide them with the information– Facility interface Code (FIC): 02LS2– Service Order Code (SOC): 9.0Y– Universal Service Order Code (USOC) Jack: RJ11C as indicated on the label on the bottom side of the base station.Safety precautionsBefore using your telephone equipment, basic safety instructions should always be followed to reduce the risk of fire, electric shock and injury to persons. 1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use damp cloth for cleaning. 4. Do not use this product near water, for exam-ple, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swim-ming pool.5. Place this product securely on a stable sur-face. Serious damage and/or injury may result if the unit falls.6. Slots or openings in the cabinet and the back and bottom are provided for ventilation, to pro-tect it from overheating. These openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register, or in a place where proper ventilation is not provided.7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.8. Do not place objects on the power cord. Install the unit where no one can step or trip on the cord.9. Do not overload wall outlets and extension cords as this can result in the risk of fire or elec-tric shock.10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in the risk of fire or elec-tric shock. Never spill liquid of any kind on this product.11. To reduce the risk of electric shock or burns, do not disassemble this product. Take it to a qualified service center when service is required. Opening or removing covers may expose you to dangerous voltages, dangerous electrical current or other risks. Incorrect reas-sembly can cause electric shock when the appli-ance is subsequently used.12. Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:a.) When the power cord is damaged or frayed.b.) If liquid has been spilled into the product. c.) If the product has been exposed to rain or water. d.) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and may require extensive work by a qualified technician to restore the product to normal operation.
32AppendixVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / appendix.fm / 9.6.08e.) If the product has been dropped or physi-cally has been damaged. f.) If the product exhibits a distinct change in performance. 13. Avoid using a telephone (other than a cord-less type) during a thunderstorm. There may be a remote risk of electrical shock from lightning. Therefore we suggest a surge arrestor.14. Do not use the telephone to report a gas leak in the vicinity of the leak.15. Emergency/911 numbers may not be dialed if the keypad is locked.16. Minimum No. 26 AWG telecommunication line cord must be used with this phone.BATTERY SAFETY PRECAUTIONSTo reduce the risk of fire, injury or electric shock, and to properly dispose of batteries, please read and understand the following instructions.CONTAINS ALKALINE NICKEL METAL HYDRIDE BATTERY. BATTERY MUST BE RECYCLED OR DIS-POSED OF PROPERLY. DO NOT DISPOSE OF IN MUNICIPAL WASTE.1. Only use the batteries specified for use with this product.2. DO NOT USE ALKALINE NICKEL CADMIUM OR ALKALINE LITHIUM BATTERIES, or mix batteries of different sizes or from different manufactur-ers in this product. DO NOT USE NONRE-CHARGEABLE BATTERIES.3. Do not dispose of the batteries in a fire; the cells may explode. Do not expose batteries to water. Check with local codes for special dis-posal instructions.4. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. The electrolyte may be toxic if swallowed.5. Exercise care in handling the batteries in order not to short the batteries with conducting materials such as rings, bracelets, and keys. The batteries or conducting material may overheat and cause burns or fire.6. Charge the batteries provided with, or identi-fied for use with, this product only in accord-ance with the instructions and limitations spec-ified in the user’s manual. Do not attempt to charge the batteries with any means other than that specified in the users manual.7. Periodically clean the charge contacts on both the charger and handset.
33AppendixVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / appendix.fm / 9.6.08Service (Customer Care)Customer Care Warranty for Cordless ProductsTo obtain Customer Care Warranty service,product operation information, or for problem resolution, call:Toll Free: 1-866-374-38649:00 a.m. – 5:00 p.m. Monday-Saturday System InformationWhen calling the Customer Care service, you may be asked to provide your phone's system information.During the call, proceed as follows:§Menu§ ¢s ¢System InfoOperation HoursSelect entry and press §OK§.The number of hours your system has been operating.§Back§ Press display key.sHS S/W VersionSelect entry and press §OK§.The software version of the handset is dis-played. Use q to scroll through all of the information.§Back§ Press the display key.sBase S/W Ver.Select entry and press §OK§.The software version of the base station is displayed. Use q to scroll through all of the information.§Back§ Press the display key three times to return to normal tele-phone mode.End-user limited warranty The Verizon brand and the Verizon trademark are used under license. This product is covered by a one year limited warranty. Any repair replacement or warranty service, and all ques-tions about this product should be directed to: 1-866-374-3864.This limited, non-transferable warranty is pro-vided to the original buyer/end-consumer ("you") for systems, handsets and accessories (collectively, "Product") provided by Siemens Home and Office Communication Devices LLC ("Siemens"). Siemens warrants to you that at the date of purchase, the product is free of defects in workmanship and materials and the software included in the Product will perform in substantial compliance to its program specifica-tions.1. WARRANTY PERIODThe Product warranty period is one (1) year from the original date of purchase by you. Proof of purchase (e.g., sales slip or invoice) must be provided with any Product returned during the warranty period. Batteries supplied with the Products are warranted to be free from defects at the time of purchase only.2. EXCLUSIVE REMEDY Siemens' entire liability and your exclusive rem-edy if the Product is defective in materials or workmanship during the warranty period and is returned shall be that the Product will be repaired or replaced as set forth in Section 4 below. Reconditioned replacement compo-nents, parts or materials may be used in the replacement or repair. Data in the memory of the Product may be lost during repair.
34AppendixVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / appendix.fm / 9.6.083.THIS LIMITED WARRANTY DOES NOT COVER AND IS VOID WITH RESPECT TO THE FOLLOWING:– Cosmetic damage, physical damage to the surface of the Product, including, without limitation, breakage, cracks, dents, scratches or adhesive marks on the LCD screen or outside casing of the Product.– Products which have been repaired, main-tained or modified (including the antenna) by anyone other than Siemens or a Siemens-approved repair facility, or that have been improperly installed.– Cost of installation, removal or reinstalla-tion.– Damage due to any telephone, electronic, hardware or software program, network, Internet or computer malfunctions, failures, or difficulties of any kind, including without limitation, server failure or incomplete, incorrect, garbled or delayed computer transmissions.– Equipment and components not manufac-tured, supplied or authorized by Siemens.– Modification of the Product's components, or operation of the Product in an unsuitable environment or in a manner for which it is not intended, including but not limited to failures or defects caused by misuse, abuse, accidents, physical damage, abnormal oper-ation, improper handling or storage, neglect, alterations, unauthorized installa-tion, removal or repairs, failure to follow instructions, problems caused by the car-rier's network coverage, exposure to fire, water or excessive moisture or dampness, floods, or extreme changes in climate or temperature, acts of God, riots, acts of ter-rorism, spills of food or liquids, viruses or other software flaws introduced into the Product, or other acts which are not the fault of Siemens and which the Product is not specified to tolerate, including damage caused by mishandling or blown fuses.– Products which have had warranty stickers, electronic serial number and/or serial number label removed, altered, rendered illegible or fraudulently applied to other equipment.– Signal reception problems (unless caused by defect in material or workmanship in the Product).– Products operated outside published maxi-mum ratings.– Performance of the Products when used in combination with other products or equip-ment not manufactured, supplied or author-ized by Siemens.– Consumables (such as batteries and fuses).– Payments for labor or service to representa-tives or service centers not authorized to perform product maintenance by Siemens.–Loss of data.– Testing and examination discloses that the alleged defect or malfunction in the Product does not exist.This warranty does not cover customer educa-tion, instruction, installation or removal, set up adjustments, problems related to service(s) provided by a carrier or other service provider, and/or signal reception problems. Siemens shall not be responsible for software, firmware, information, or memory data contained in, stored on, or integrated with any Products returned for repair, whether under warranty or not. This warranty is valid only in the United States.USE WITH ACCESSORIES NOT SUPPLIED BY SIEMENS OR NOT OTHERWISE EXPRESSLY AUTHORIZED BY SIEMENS MAY VOID WARRANTY.4. WARRANTY CLAIM PROCEDUREAll warranty claims must be made by notifying Siemens prior to the expiration of the warranty period. Siemens' obligation to provide war-ranty support shall not extend past the end of the warranty period, except that any product repaired or replaced during the warranty period shall continue to be warranted for the balance of such warranty period or thirty (30) days, whichever is greater. Throughout the warranty period, Verizon Sup-port will be available Monday through Saturday from 9:00 a.m. to 5:00 p.m., excluding National holidays. Support service will be provided for you by accessing the toll free customer service number:1-866-374-3864 5. LIMITATION OF WARRANTYSiemens makes no warranty or representation that the software in the Products will meet your requirements or will work in combination with any hardware or applications software products provided by third parties, that the operation of
35AppendixVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / appendix.fm / 9.6.08the software will be uninterrupted or error free, or that all defects in the software products will be corrected. 6. LIMITATION ON REMEDIES; NO CONSEQUENTIAL OR OTHER DAMAGES Your exclusive remedy for any breach of this limited warranty is as set forth above. Except for any refund elected by Siemens, YOU ARE NOT ENTITLED TO ANY DAMAGES, INCLUD-ING BUT NOT LIMITED TO CONSEQUENTIAL DAMAGES, if the Product does not meet the limited warranty , and, to the maximum extent allowed by applicable law, even if any remedy fails of its essential purpose. The terms below ("Exclusion of Incidental, Consequential and Certain Other Damages") are also incorporated into this limited warranty . Some states/jurisdic-tions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This limited warranty gives you specific legal rights. You may have others which vary from state/jurisdiction to state/jurisdiction.7. DISCLAIMER OF WARRANTIES SIEMENS AND ITS SUPPLIERS PROVIDE THE PRODUCT AND SUPPORT SERVICES (IF ANY) AS IS AND WITH ALL FAULTS. THE LIMITED WAR-RANTY IS IN LIEU OF ANY OTHER EXPRESS WAR-RANTIES (IF ANY) CREATED BY ANY DOCUMEN-TATION OR PACKAGING EXCEPT FOR THE LIM-ITED WARRANTY, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IS IN LIEU OF ANY IMPLIED OR STATUTORY WARRAN-TIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY OR COMPLETENESS OR RESPONSES, OF RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES AND OF LACK OF NEGLI-GENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISION OF OR FAILURE TO PRO-VIDE SUPPORT SERVICES. ALSO, THERE IS NO WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, OR CORRE-SPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT WITH REGARD TO THE PROD-UCT. Some states do not allow limitations on how long an implied warranty lasts or the exclu-sion or limitation of incidental or consequential damages, so the above exclusions or limitations may not apply to you. If an implied warranty or condition is created by your state and federal or state law prohibits disclaimer of it, you also have an implied warranty or condition, BUT ONLY AS TO DEFECTS DISCOVERED DURING THE PERIOD OF THIS LIMITED WARRANTY (ONE YEAR). AS TO ANY DEFECTS DISCOVERED AFTER THE ONE YEAR PERIOD, THERE IS NO WAR-RANTY OR CONDITION OF ANY KIND. This lim-ited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. In no event shall Siemens' liability exceed the cost of repairing or replacing defective Products as provided herein, and any such liabilities will terminate upon expiration of the warranty period.Any supplements or updates to the Product or the software in the Product, including without limitation, any (if any) software fixes or upgrades or bug fixes provided to you after the expiration of the one year limited warranty period are not covered by any warranty or con-dition, express, implied or statutory.8. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL SIE-MENS, SELLER OR THEIR SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTER-RUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASON-ABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSO-EVER) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, OR OTHER-WISE UNDER OR IN CONNECTION WITH ANY PROVISION OF THIS LIMITED WARRANTY, EVEN IN THE EVENT OF THE FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT OR BREACH OF WARRANTY OF SIE-MENS OR SELLER OR ANY SUPPLIER, AND EVEN IF SIEMENS OR SELLER OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REPAIR OR REPLACEMENT, AS PRO-VIDED UNDER THE WARRANTY, IS YOUR SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE LIMITED WARRANTY.
36AppendixVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / appendix.fm / 9.6.089. LIMITATION OF LIABILITY AND REMEDIES NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAM-AGES REFERENCED ABOVE AND ALL DIRECT OR GENERAL DAMAGES), THE ENTIRE LIABILITY OF SIEMENS, SELLER AND ANY OF THEIR SUPPLIERS UNDER ANY PROVISION OF THIS LIMITED WAR-RANTY AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING (EXCEPT FOR ANY REMEDY OF REPAIR OR REPLACEMENT ELECTED BY SIE-MENS OR SELLER OR SUPPLIER WITH RESPECT TO ANY BREACH OF THE LIMITED WARRANTY) SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT OR FIVE DOLLARS ($5.00 USD). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.10.GOVERNING LAW This limited warranty will be governed by the laws of Texas, and excluding the United Nations Convention on Contracts for the International Sale of Goods. If you want to learn more about Verizon Service or for Support on your Verizon phone, visit our web site at http://www.verizon.com or please call 1-866-374-3864.Issued by Siemens Cordless ProductsSiemens is a registered trademark of Siemens Home and Office Communication Devices GmbH & Co. KG.Siemens Cordless Products is a division of Siemens Home and Office Communication Devices GmbH & Co. KG.Product attributes subject to change. Siemens reserves the right, to make changes without notice in equipment design and/or components. Part Number:A31008-M1929-R301-2-6019 © Copyright 2008 Verizon. All rights reserved.
37IndexVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / V200_kombi_SIX.fm / 4.6.08IndexSymbols"External" (Calls list). . . . . . . . . . . . . . 15"Withheld" (Calls list) . . . . . . . . . . . . . 15AAccess protection . . . . . . . . . . . . . . . 26Activatinganswer machine. . . . . . . . . . . . . . . 17answer machine (remote operation) . . . . . . . . . 21auto answer. . . . . . . . . . . . . . . . . . 25handset . . . . . . . . . . . . . . . . . . . . . 11internal conference call . . . . . . . . . 24keypad lock . . . . . . . . . . . . . . . . . . 11Announcement (answer machine) . . . 17Announcement mode (answer machine) . . . . . . . . . . . . . . . 16, 17Answer machine . . . . . . . . . . . . . . . . 16activating/deactivation . . . . . . . . . . 17deleting messages . . . . . . . . . . . . . 19playing back messages . . . . . . . . . . 18recording a personal announcement/announce only . . . . . . . . . 17, 21remote operation . . . . . . . . . . . . . . 20Answer machine, see Network mailboxArea codes . . . . . . . . . . . . . . . . . . . . . 9Attended call transfer . . . . . . . . . . . . 23Auto answer . . . . . . . . . . . . . . . . 10, 25BBase stationchanging . . . . . . . . . . . . . . . . . . . . 22connecting and setting up . . . . . . . . 7connecting the device . . . . . . . . . . . 8display language . . . . . . . . . . . . . . 26PABX relevant settings . . . . . . . . . . 26range . . . . . . . . . . . . . . . . . . . . . . . 7ring tone melody . . . . . . . . . . . . . . 26ring tone volume . . . . . . . . . . . . . . 26setting. . . . . . . . . . . . . . . . . . . . . . 26settings . . . . . . . . . . . . . . . . . . . . . 26system PIN. . . . . . . . . . . . . . . . . . . 26Batteryfitting . . . . . . . . . . . . . . . . . . . . . . . 8recommended batteries . . . . . . . . . 29Best base station . . . . . . . . . . . . . . . . 22CCallanswering. . . . . . . . . . . . . . . . . . . .10conference call . . . . . . . . . . . . . . . .24ending . . . . . . . . . . . . . . . . . . . . . .10external . . . . . . . . . . . . . . . . . . . . .10internal. . . . . . . . . . . . . . . . . . . . . .22picking up from answer machine. . . . . . . . . . . . . . . . . .19transferring (connecting). . . . . . . . .23Call acceptance . . . . . . . . . . . . . . . . .20Call duration . . . . . . . . . . . . . . . . . . .10Call history. . . . . . . . . . . . . . . . . . . . .14Call transfer . . . . . . . . . . . . . . . . . . . .23attended. . . . . . . . . . . . . . . . . . . . .23unattended. . . . . . . . . . . . . . . . . . .23Call waiting . . . . . . . . . . . . . . . . . . . .23internal call. . . . . . . . . . . . . . . . . . .23Caller ID. . . . . . . . . . . . . . . . . . . . . . .10Callingexternal . . . . . . . . . . . . . . . . . . . . .10Calls list"External" . . . . . . . . . . . . . . . . . . . .15"Withheld" . . . . . . . . . . . . . . . . . . .15dialing . . . . . . . . . . . . . . . . . . . . . .14list type . . . . . . . . . . . . . . . . . . . . .15name of caller. . . . . . . . . . . . . . . . .15number of caller . . . . . . . . . . . . . . .15status of entry . . . . . . . . . . . . . . . .15Care of the telephone. . . . . . . . . . . . .28Changingdialing mode. . . . . . . . . . . . . . . . . .26flash time . . . . . . . . . . . . . . . . . . . .27name of handset. . . . . . . . . . . . . . .24ring tone. . . . . . . . . . . . . . . . . . . . .25Changing system PIN . . . . . . . . . . . . .26Character set table . . . . . . . . . . . . . . .12Charge saving function. . . . . . . . . . . .20Charge status of the batteries . . . . . . . 1Clearkey . . . . . . . . . . . . . . . . . . . . . .11, 13Clear key . . . . . . . . . . . . . . . . . . . . . .12Conference call . . . . . . . . . . . . . . . . .24Control key . . . . . . . . . . . . . . . . . .1, 11Customer Care . . . . . . . . . . . . . . . . . .33DDeactivatinganswer machine . . . . . . . . . . . . . . .17auto answer . . . . . . . . . . . . . . . . . .25
38IndexVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / V200_kombi_SIX.fm / 4.6.08conference call. . . . . . . . . . . . . . . . 24handset . . . . . . . . . . . . . . . . . . . . . 11keypad lock . . . . . . . . . . . . . . . . . . 11Default settings. . . . . . . . . . . . . . . . . 27Deletingannouncement for answer machine . . . . . . . . . . . . . . . . . 17characters . . . . . . . . . . . . . . . . . . . 12message . . . . . . . . . . . . . . . . . . . . 19De-registering (handset) . . . . . . . . . . 22DialingCalls list. . . . . . . . . . . . . . . . . . . . . 14Dialing mode . . . . . . . . . . . . . . . . . . 26Directory. . . . . . . . . . . . . . . . . . . . . . 13managing entries. . . . . . . . . . . . . . 13opening. . . . . . . . . . . . . . . . . . . . . 11saving entry. . . . . . . . . . . . . . . . . . 13Displayin idle status . . . . . . . . . . . . . . . . . 12keys. . . . . . . . . . . . . . . . . . . . 1, 2, 11lighting . . . . . . . . . . . . . . . . . . . . . 25number (CID/CNID) . . . . . . . . . . . . 10Display contrasthandset . . . . . . . . . . . . . . . . . . . . . 24Display languagebase station. . . . . . . . . . . . . . . . . . 26handset . . . . . . . . . . . . . . . . . . . . . 24DP (pulse dialing) . . . . . . . . . . . . . . . 26EEarpiece mode . . . . . . . . . . . . . . . . . 10End Call key . . . . . . . . . . . . . . . 1, 3, 10Ending, call . . . . . . . . . . . . . . . . . . . . 10Ending, see DeactivateEntryselecting (menu) . . . . . . . . . . . . . . . 6selecting from directory . . . . . . . . . 13status (Calls list). . . . . . . . . . . . . . . 15Example for menu input . . . . . . . . . . . 6FFast accessanswer machine. . . . . . . . . . . . . . . 20network mailbox . . . . . . . . . . . . . . 21Flash time. . . . . . . . . . . . . . . . . . . . . 27HHandsetactivating/deactivating . . . . . . . . . . 11auto answer. . . . . . . . . . . . . . . . . . 25changing name. . . . . . . . . . . . . . . .24changing to best reception . . . . . . .22changing to different base station . . . . . . . . . . . . . . . . . . .22contact with liquid . . . . . . . . . . . . .28deactivating ring tone . . . . . . . . . . .25de-registering . . . . . . . . . . . . . . . . .22display contrast. . . . . . . . . . . . . . . .24display language . . . . . . . . . . . . . . .24idle status. . . . . . . . . . . . . . . . . .9, 12key-touch tone . . . . . . . . . . . . . . . .25lighting. . . . . . . . . . . . . . . . . . . . . .25loudspeaker volume . . . . . . . . . . . .25paging . . . . . . . . . . . . . . . . . . . . . .22reception strength. . . . . . . . . . . . . . 7registering . . . . . . . . . . . . . . . . . . .22registering with another base station . . . . . . . . . . . . . . .22ring tone melody. . . . . . . . . . . . . . .25ring tone volume. . . . . . . . . . . . . . .25settings . . . . . . . . . . . . . . . . . . . . .24setup . . . . . . . . . . . . . . . . . . . . . . . 8transferring call. . . . . . . . . . . . . . . .23using several handsets . . . . . . . . . .22Handset charge times. . . . . . . . . . . . .29Handset operating time . . . . . . . . . . .29Handsfree talking. . . . . . . . . . . . . . . .10Hold while making internal call . . . . . .23IIconanswer machine . . . . . . . . . . . . . . .17display . . . . . . . . . . . . . . . . . . . . . .11keypad lock. . . . . . . . . . . . . . . . . . .11new message . . . . . . . . . . . . . . . . .18ring tone. . . . . . . . . . . . . . . . . . . . .25Idle status (display) . . . . . . . . . . . . . . 9Idle status, returning to . . . . . . . . . . .12Internalconference call . . . . . . . . . . . . . . . .24making calls . . . . . . . . . . . . . . . . . .22simultaneous internal call . . . . . . . .23Internal call . . . . . . . . . . . . . . . . . . . .22call waiting . . . . . . . . . . . . . . . . . . .23KKey 1 (fast access) . . . . . . . . . . . . . . .20Keypad lock . . . . . . . . . . . . . . . . . . . .11Keysclear key . . . . . . . . . . . . . . .11, 12, 13
39IndexVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / V200_kombi_SIX.fm / 4.6.08Control key . . . . . . . . . . . . . . . . 1, 11display keys . . . . . . . . . . . . . . 1, 2, 11End Call key . . . . . . . . . . . . . . 1, 3, 10fast access . . . . . . . . . . . . . . . . . . . 20Last Number Redial key . . . . . . . . . 14menu key . . . . . . . . . . . . . 11, 12, 13mute/unmute microphone . . . . . . . . 1On/Off key . . . . . . . . . . . . . . . . . . 1, 3Pound key . . . . . . . . . . . . . . . . . 1, 11star key . . . . . . . . . . . . . . . . . . . 1, 25Talk key . . . . . . . . . . . . . . . . . . . . 1, 3LLast number redial . . . . . . . . . . . . . . 14Lighting . . . . . . . . . . . . . . . . . . . . . . 25Liquid . . . . . . . . . . . . . . . . . . . . . . . . 28Listcall history. . . . . . . . . . . . . . . . . . . 14missed calls . . . . . . . . . . . . . . . . . . 15List type (Calls list) . . . . . . . . . . . . . . 15Listening in during recording . . . . . . . 19Locating handset. . . . . . . . . . . . . . . . 22Lockactivating/deactivating keypad lock. . . . . . . . . . . . . . . . . . . . . 11Loudspeaker volume . . . . . . . . . . . . . 25MMaking callsanswering a call . . . . . . . . . . . . . . . 10external. . . . . . . . . . . . . . . . . . . . . 10internal . . . . . . . . . . . . . . . . . . . . . 22Manual last number redial . . . . . . . . . 14Medical equipment . . . . . . . . . . . . . . . 5Menukey . . . . . . . . . . . . . . . . . . 11, 12, 13menu guidance . . . . . . . . . . . . . . . 12menu input . . . . . . . . . . . . . . . . . . . 6Messages . . . . . . . . . . . . . . . . . . . . . 16deleting. . . . . . . . . . . . . . . . . . . . . 19icon for new message. . . . . . . . . . . 18marking as "new" . . . . . . . . . . . . . . 19playing back . . . . . . . . . . . . . . . . . 18Microphone . . . . . . . . . . . . . . . . . . . . 1mute/unmute . . . . . . . . . . . . . . . . . 1Missed call . . . . . . . . . . . . . . . . . . . . 15Mutekey . . . . . . . . . . . . . . . . . . . . . . . . . 1NName of caller (Calls list) . . . . . . . . . .15Network mailbox . . . . . . . . . . . . . . . .21Numberadding to directory . . . . . . . . . . . . .14display calling number (CIP). . . . . . .10saving in directory. . . . . . . . . . . . . .13Number of caller (Calls list) . . . . . . . . .15OOn/Off key . . . . . . . . . . . . . . . . . . . .1, 3PPABXsetting dialing mode . . . . . . . . . . . .26setting flash time . . . . . . . . . . . . . .27settings . . . . . . . . . . . . . . . . . . . . .26switching to tone dialing . . . . . . . . .27Pack contents. . . . . . . . . . . . . . . . . . . 7Paging . . . . . . . . . . . . . . . . . . . . . . . .22Paging, handset . . . . . . . . . . . . . . . . .22PIN . . . . . . . . . . . . . . . . . . . . . . . . . .26Playbackannouncement (answer machine) . . . . . . . . . . . . . .17, 18Pound key . . . . . . . . . . . . . . . . . . .1, 11Power consumption . . . . . . . . . . . . . .29Power supply unit. . . . . . . . . . . . . . . . 5Protecting phone from access . . . . . . .26Pulse dialing. . . . . . . . . . . . . . . . . . . .26QQuestions and answers. . . . . . . . . . . .28RRange . . . . . . . . . . . . . . . . . . . . . . . . 7Reception strength . . . . . . . . . . . . . . . 7Redialkey . . . . . . . . . . . . . . . . . . . . . . . . .14Registering (handset) . . . . . . . . . . . . .22Registering handset . . . . . . . . . . . . . .22Remote control. . . . . . . . . . . . . . . . . .20Ring toneactivating/deactivating . . . . . . . . . .25changing . . . . . . . . . . . . . . . . . . . .25setting melody (base station). . . . . .26setting melody (handset). . . . . . . . .25setting volume (base station). . . . . .26setting volume (handset). . . . . . . . .25Ring tone melody
40IndexVerizon 200 / USA EN / A31008-M1929-R301-2-6019 / V200_kombi_SIX.fm / 4.6.08base station. . . . . . . . . . . . . . . . . . 26Ring tone volumebase station. . . . . . . . . . . . . . . . . . 26SSafety precautions. . . . . . . . . . . . . . . . 5Searching in the directory . . . . . . . . . 13Service (Customer Care) . . . . . . . . . . 33Settingdate . . . . . . . . . . . . . . . . . . . . . . . . 9lighting . . . . . . . . . . . . . . . . . . . . . 25time . . . . . . . . . . . . . . . . . . . . . . . . 9Setting up, base station . . . . . . . . . . . . 7Settingsauto answer. . . . . . . . . . . . . . . . . . 25base station. . . . . . . . . . . . . . . . . . 26dialing mode . . . . . . . . . . . . . . . . . 26display contrast (handset) . . . . . . . 24display language (base station). . . . 26flash time . . . . . . . . . . . . . . . . . . . 27for connecting to PABX. . . . . . . . . . 26handset . . . . . . . . . . . . . . . . . . . . . 24key-touch tone (handset) . . . . . . . . 25loudspeaker volume . . . . . . . . . . . . 25restoring default settings . . . . . . . . 27ring tone melody (handset) . . . . . . 25ring tone volume (base station) . . . 26ring tone volume (handset) . . . . . . 25tone dialing . . . . . . . . . . . . . . . . . . 27Setuphandset . . . . . . . . . . . . . . . . . . . . . . 8Sound, see ring toneSpecial characters . . . . . . . . . . . . . . . 12Specifications . . . . . . . . . . . . . . . . . . 29Star key. . . . . . . . . . . . . . . . . . . . . 1, 25System PIN . . . . . . . . . . . . . . . . . . . . 26System settings. . . . . . . . . . . . . . . . . 26TTalk key. . . . . . . . . . . . . . . . . . . . . . 1, 3Tone dialing . . . . . . . . . . . . . . . . . . . 27Troubleshooting . . . . . . . . . . . . . . . . 28UUnattended call transfer . . . . . . . . . . 23Unknown . . . . . . . . . . . . . . . . . . . . . 10Unknown caller. . . . . . . . . . . . . . . . . 10VVolumehandset loudspeaker . . . . . . . . . . . 25handset ring tone . . . . . . . . . . . . . .25ring tone. . . . . . . . . . . . . . . . . . . . .25

Navigation menu