Gilmour 9400 Users Manual Microsoft Timer Rev [Compatibility Mode]

9400 to the manual 4ff6a026-8719-484e-a740-fc4f6355e6bd

: Gilmour Gilmour-9400-Users-Manual-560365 gilmour-9400-users-manual-560365 gilmour pdf

Open the PDF directly: View PDF .
Page Count: 35

Download
Open PDF In Browser	View PDF

1

Electronic Timers
Four Program (Model #9400)
Eight Program (Model #9408)
Quick Start …………………….……………… 3
Detachable Electronics ………..…………… 4
Detailed Set Up …………………….…..........

5

Time and Day ……….…….……….…

6

Watering Time …………….…………. 12
Watering Days …………………….…. 20
Skip Days ……………………….….…. 27
Changing a Program ……………...………. 34
Program Review …………………...….……. 35

2

Models #9400 & #9408

The 4 Program Electronic Timer
(Model #9400) offers you up to
four different programs and the 8
Program Electronic Timer (Model
#9408) offers you up to 8 different
program options.
You can water every day, more
than once a day, every other day
or every third day.

3

Models #9400 & #9408

Quick Start
Programming the timer is quick
and easy.
Just answer the
questions flashing on the screen.
Press “OK” to start programming.
Use “Arrow” keys to review
functions to set and “OK” to select
that function. Then as they flash,
use the “Arrow” keys to set hours,
minutes, am/pm, or day and “OK”
to accept that setting.

4

Models #9400 & #9408

Detachable Electronics
Easy to Program

The electronics portion of the
timer can be removed from
the valve section for easier
programming. Press the gray
buttons on each side of the
timer body to release the
electronics.
After programming, slide the
electronics back over the
valve until the gray buttons
snap back into place.

Just squeeze the side
grips and pull to remove.

5

Models #9400 & #9408

Press any key (including
On/Off) to activate the
screen.
On/Off is used to
manually open or close
the valve.
The display will power down
if no keys are pressed
within 2 minutes.

6

Detailed Set Up
Time and Day
Models #9400 & #9408

12:00A Sunday
To Set Press OK
The screen will be flashing
“To Set Press OK.”
Press “OK” to begin.

7

Detailed Set Up
Time and Day
Models #9400 & #9408

Set Time & Day > OK
>
<

Set Program 1

“Set Time & Day” will be
flashing.
Press “OK” to set.

8

Detailed Set Up
Time and Day
Models #9400 & #9408

Set Hour Now
>
<

12 :00 A

Then OK

“Hours” will flash.
Use up and down
arrows to set the
hour.
Press “OK” to set.

9

Detailed Set Up
Time and Day
Models #9400 & #9408

Set Minutes Now
>
<

12:00 A

Then OK

“Minutes” will flash
next.
Use up and down
arrows to set the
minutes.
Press “OK” to set.

10

Detailed Set Up
Time and Day
Models #9400 & #9408

Set AM OR PM Now
>
<

12:00 A

Then OK

“A” for a.m. or
“P” for p.m. will be
flashing.
Choose either “A” for
a.m. or “P” for p.m.
with arrow keys.
Press “OK.”

11

Detailed Set Up
Time and Day
Models #9400 & #9408

12:00 A

>
<

Set Day

& OK

Sunday

“Day of Week” will
be flashing.
Choose day of week
with arrow keys.
Press “OK.”

12

Watering Time
Models #9400 & #9408

Set Program 1 > OK
>
<

Set Program 2

“Set Program 1” will
be flashing.
Press “OK.”

13

Watering Time
Models #9400 & #9408

Program 1

Set Start Time 1
>
<

12:00 A

Then OK

“Hours” will flash.
Use up and down
arrows to set the
hour.
Press “OK.”

14

Watering Time
Models #9400 & #9408

Program 1

Set Start Time 1
>
<

12:00 A

Then OK

“Minutes” will flash.
Use up and down
arrows to set the
minutes.

Press “OK.”

15

Watering Time
Models #9400 & #9408

Program 1

Set Start Time 1
>
<

12:00 A

Then OK

“A” for a.m. or
“P” p.m. will be
flashing.
Choose either “A” for
a.m. or “P” for p.m.
with arrow keys.
Press “OK.”

16

Watering Time
Models #9400 & #9408

Program 1

Set End Time 1 > OK

Press “OK.”

>
<

Days to Water

17

Watering Time
Models #9400 & #9408

Program 1

Set End Time 1
>
<

12:00 A

Then OK

“Hours” will flash.
Use up and down
arrows to set the
hour.
Press “OK.”

18

Watering Time
Models #9400 & #9408

Program 1

Set End Time 1
>
<

12:00 A

Then OK

“Minutes” will flash.
Use up and down
arrows to set the
minutes.
Press “OK.”

19

Watering Time
Models #9400 & #9408

Program 1

Set End Time 1
>
<

12:00 A

Then OK

“A” for a.m. or
“P” p.m. will be
flashing.
Choose either “A” for
a.m. or “P” for p.m.
with arrow keys.
Press “OK.”

20

Watering Days
Models #9400 & #9408

Program 1

Days to Water

>
<

Set Skip Days

> OK

“Days to Water” will
be flashing.
Choose either
“DAYS TO WATER”
by pressing “OK” or
arrow down to select
“SET SKIP DAYS.”

21

Watering Days
Models #9400 & #9408

Program 1

Water on Sun
>
<

Set

> Yes

Then OK

If “Days to Water” is
selected, Water on
Sunday” with “Yes”
flashing is shown.
Use up and down
arrows to choose
“Yes or No.”
Press “OK.”

22

Watering Days
Models #9400 & #9408

Program 1

Water on Mon
>
<

Set

> Yes
Then OK

Water on Mon with
“Yes” flashing is
shown.
Use up and down
arrows to choose
“Yes or No.”
Press “OK.”

23

Watering Days
Models #9400 & #9408

Program 1

Water on Tue
>
<

Set

> Yes

Then OK

Repeat for remaining
days of the week, using
arrow keys to set “Yes” or
“No” and “OK.”

24

Watering Days
Models #9400 & #9408

Program 1

Water on Sat
>
<

Set

> Yes

Then OK

After Saturday is complete,
“Set Skip Days” will be
flashing.
Press down arrow to choose
“FINISHED PGM 1” and
press “OK.”

25

Set Additional Programs
Models #9400 & #9408

Program 2

Set Program 2

>

Set Program 3

>
<

OK

“Set Program 2” will be flashing.
Press “OK” to begin
programming Program 2.
Follow the steps used for
Program 1.

26

Set Additional Programs
Models #9400 & #9408

Program 2

Set Program 2

>

Set Program 3

>
<

OK

If not setting Programs
2, 3, 4, 5, 6, 7 or 8, use
arrow keys to move to
“Review Programs” or
“Finished.”
Press “OK.”

27

Set Skip Days
Models #9400 & #9408

Program 1

Set Skip Days > OK
>
<

Finished PGM 1

If Set Skip Days was
chosen, “Set Skip Days”
will be flashing.
Press “OK.”

28

Set Skip Days
Models #9400 & #9408

Program 1

Water Ea 2nd Day
>
<

No Set

& OK

If using “SET SKIP DAY,”
Timer will begin watering
on the day program is set.
For example, if you
program your timer on
Sunday, and you choose
“every 2nd day” then your
watering schedule will be:
S M T W T
X

X

X

F S
X

29

Set Skip Days
Models #9400 & #9408

Program 1

Water Ea 2nd Day
>
<

No Set

& OK

You can water every 2nd
day or every 3rd day.
Use up and down arrows
to choose “Yes or No” to
“water every 2nd day” OR
“water every 3rd day.”
Press “OK.”

30

Set Skip Days
Models #9400 & #9408

Program 1

Finished PGM 1

>

Set Start Time 1

>
<

“Finished PGM 1”
will be flashing.
Press OK.

31

Set Additional Programs
Models #9400 & #9408

Program 2

Set Program 2

>

Set Program 3

>
<

OK

“Set Program 2” will be flashing.
Press “OK” to begin
programming Program 2.
Follow the steps used for
Program 1.

32

Set Additional Programs
Models #9400 & #9408

Program 2

Set Program 2

>

Set Program 3

>
<

OK

If not setting Programs 2,
3, 4, 5, 6, 7 or 8, use arrow
keys to move to “Review
Programs” or “Finished.”
Press “OK.”

33

Set Skip Days
Models #9400 & #9408

NOTE: If Set Skip Days is
set to yes, you cannot
choose Watering Days in
the same program.
To change a program
back to Watering Days, go
to Set Skip Days and
choose “No” to water
each 2nd and 3rd days.

34

Changing a Program
Models #9400 & #9408

To make changes to a
program, press any key
(including On/Off) to activate
the screen.
Press “OK.”
Use the down arrow to
choose PGM Set/RePgm
and Press “OK.”
Use arrow keys to scroll
through programs.
Press “OK” to choose
program to reset.
Repeat programming steps.

35

Program Review
Models #9400 & #9408

With “Review Program” flashing,
Press “OK.”
To review Program 1, press down arrow
key. Screen will show letters for each
day of the week and “Y” for yes or “N”
for no for each day. To the right it will
show start time on top and stop time on
bottom.
Press arrow key to review Programs 1
through 8.
After Program 8, “Review Done” flashes.
Press “OK” to exit this section.
“Finished” will flash.
Press “OK” if finished.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2008:05:21 16:59:43Z
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:05:21 17:11:48-04:00
Metadata Date                   : 2008:05:21 17:11:48-04:00
Format                          : application/pdf
Creator                         : nickh
Title                           : Microsoft PowerPoint - Timer Rev (2).ppt [Compatibility Mode]
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:2060d319-dadb-4c00-9d74-834ec67788a3
Instance ID                     : uuid:941d0348-34cb-4d85-84ae-3231e3b44ee2
Page Count                      : 35
Author                          : nickh

EXIF Metadata provided by EXIF.tools