Global Sun Technology GL245401-0A 2.4GHz IEEE 802.11g Network Adapter User Manual Revised Manual
Global Sun Technology Inc 2.4GHz IEEE 802.11g Network Adapter Revised Manual
Revised Manual
IEEE 802.11g (draft) Wireless Network Adapter User Manual Model: GL245401-0A version 1.0 Manufacturer's Disclaimer Statement The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or the products associated with it at any time without obligation to notify any person or organization of such changes. In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages. This document contains materials protected by copyright. All rights are reserved. No part of this manual may be reproduced or transmitted in any form, by any means or for any purpose without expressed written consent of its authors. Product names appearing in this document are mentioned for identification purchases only. All trademarks, product names or brand names appearing in this document are registered property of their respective owners. Driver Installation Step 1: Insert the 802.11g Wireless Network Adapter into your computer. Windows Found New Hardware Wizard will come up. Select the second option and click “Next” to continue. Step 2: Select the driver to install. Click “Browse” to select the folder where you store the driver files. Click “OK” to continue. Click “Next” to continue. Step 4: Driver Found Click “Continue Anyway” to continue Step 3: Driver Installation Driver files are being saved to your Windows system. Step 4: Driver Installation Complete Click “Finish” to complete the driver setup. The following message will appear as soon as you successfully installed the driver for your IEEE 802.11g wireless network adapter. Utility Configuration Current Status Display the current settings such as Profile Name, Network Type, Wireless Mode, Current Channel, Link Status and Encryption type. Click on the “Advanced” button to change display details. Profile Management Create profile for the common wireless networks that you get connected to. You may create new profile by clicking on the “New” button, and modify the existing profile settings by clicking on the “Modify” button. Click on “Scan Available Network” to scan for the nearby wireless network. Select the wireless network that you wish to get connected to and click “OK” to continue. In “General” Tab, Enter “Profile Name”, and enter SSID for this profile. In “Security” Tab, select the security mode, and enter the WEP key if you enable the Pre-Shared Keys option. Click “OK” for the changes to be effective. In the “Advanced” Tab, select the Power Save mode, Network Type and other advanced options. Click “OK” for the changes to be effective. Diagno stics Display current statistics such as Transmitti ng and Receiving packets. Click on “Advance Statistics” to display more detail information Click “Driver Information” to display driver version and other detail information. Click on “Action” on the menu selection to access functions such as “Disable Radio”, “Country Select… ” and “Disable Tray Icon” Click “Options” to display current settings. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Creator : Microsoft Word - IEEE 802.11g PC Card_manual Create Date : 2003:04:01 19:54:17 Title : R:\Customer document\陽慶\920213R03A\User's Manual_GL245401-01.prn.pdf Author : jane Producer : Acrobat PDFWriter 4.05 for Windows NT Modify Date : 2003:04:03 19:08:40+08:00 Page Count : 15EXIF Metadata provided by EXIF.tools