GlobalSat WorldCom GTR-388 Motorcycle/ Vehicle Tracker User Manual GTR 388 QSG N3PM2GTR388001 T2 0 1109
GlobalSat WorldCom Corporation Motorcycle/ Vehicle Tracker GTR 388 QSG N3PM2GTR388001 T2 0 1109
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3191969 |
| Application ID | toJr03TyBSecbMHO9VWbVA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 53.66kB (670760 bits) |
| Date Submitted | 2016-11-10 00:00:00 |
| Date Available | 2016-11-10 00:00:00 |
| Creation Date | 2016-11-09 16:53:07 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2016-11-09 18:42:12 |
| Document Title | GTR-388_QSG_N3PM2GTR388001_T2.0_1109 |
| Document Creator | Adobe Illustrator CC 2017 (Windows) |
1. Introduction CONTENT Motorcycle/ Vehicle Tracker Quick Start Guide (GSM/DCS/WCDMA) 1.3 Hardware specification 1.1 Introduction Item 1.Introduction .......................................................................................... 2 The tracker is designed as a durable and multi-functional 3G GPS 1.1 Introduction ....................................................................................... 2 tracker. It integrates highly sensitive GPS module and 3G communication 1.2 Features ............................................................................................ 2 module with a powerful microcontroller that fits into a compact 1.3 Hardware specification ........................................................................ 3 enclosure. The device is capable of being waterproof and ideal for use 1.4 Appearance ........................................................................................ 4 in a motorcycle, golf carts and vehicles. It provides real-time GPS 1.5 LED indicator ...................................................................................... 4 positions anytime and anywhere with an open view to the sky, and 1.6 Cable description ................................................................................ 5 offers precise positioning, and reports vehicle status to the server with 1.7 Accessories ........................................................................................ 6 necessary information shown on the map. Benefits such as enhanced 1.7.1 Standard Items ................................................................................ 6 fleet management, improved vehicle safety, emergency response, are 1.7.2 Optional Items ................................................................................. 7 all accomplished through the implementation of the tracker system. Also built-in 3G and GPS antennas are for easy installation without hassle. 2.2 Connect the Main Cable ...................................................................... 9 2.3 Connect the Main Power ...................................................................... 9 3.3 Connecting Relay ...............................................................................13 3.4 Installation reminder ..........................................................................14 1.6 Cable description Operation -30°C ~ + 60°C (0°C ~ + 45°C for charging) Dimension 107.5 mm X 38.7 mm X 23.5 mm GPS Receiver high performance GPS chipset Communication GSM/GPRS/EDGE: 850/1900MHz UMTS/HSPA+: 850/1900MHz GPS Antenna Built-in patch ceramics antenna -40°C to +60 °C GSM/GPRS/EDGE: 900/1800MHz UMTS/HSPA+: 900/2100MHz ● AGPS support Power 9V~36V Built-in Memory 32 Mb Emergency Input Negative trigger x 1 GSM/GPRS/EDGE: 850/900/1800/1900MHz UMTS/HSPA+: 800/850/900/1900/ 2100MHz Ignition (ACC) Input Positive trigger x 1 Digital Input Port Negative trigger x 1 ● Alert functions including Power low/ Over speed/ Movement alarms Digital Output Port Negative trigger x 1 (300mA) ● Tracking by preferred interval, scheduling and Geo-fence Fuel sensor Input Port Analog Input x 1( 0~28V), 12 bits resolution ● Multiple power solution Sensor Motion sensor ● IPX7 design Humidity 5% to 95% Non-Condensing Weight 66.5g 01 1.4 Appearance Temperature Built-in Monopole Antenna ● Firmware update via Over-The-Air 3.2 Connecting ignition detection line on car .............................................12 Li-Polymer 820mAh SMS/GPRS (TCP/UDP) Digital Output for Relay, 1 Digital Input for ACC detection. 3.1 Installing the Emergency button .........................................................11 Back-up Battery Protocol input for optional Emergency button, 1 Analog Input for fuel sensor, 1 3.Installation............................................................................................11 Global GSM Antenna ● Multiple I/Os support: 1 Digital Input for custom function, 1 Digital 2.5 Fix the device ....................................................................................10 Europe 1.2 Features ● Support communication protocols- SMS/TCP/UDP. 2.4 Switch on/off Tracker .........................................................................10 US Storage 2.Operation .............................................................................................. 8 2.1 Install the SIM card ............................................................................. 8 Description Model 02 03 1.7.2 Optional Items 1.7 Accessories 1.7.1 Standard Items Analog Input (Blue) SOS (Green) Input Negative (Yellow) Main Power (Red) Ground (Black) Ground (Black) Out Input (White) LED Reset button For fixing device with Velcro tape Screws of back cover Description Red blinking Device is being boot but SIM card isn’t ready Red solid SIM card is ready, but not register to network Yellow solid Registered to network, but not connected to server Green solid Registered to network, and connected to server External Emergency Button Main Unit 1.5 LED indicator LED status Ignition Detection Input (Orange) Hiding mode: Device would blink red light while it is booting up. After completing the boot, the LED would go off. 04 Wire Color Description Green SOS (Negative Trigger) Blue Fuel sensor input (Analog Input, 0~28 V, 12 bits resolution) Yellow Digital Input (Negative Trigger) Red Main Power, 9~36 V Black Ground White Digital Output (Negative Trigger), 300 mA Orange Ignition Detection Input (Positive Trigger) Black Ground 12V/24V Relay Hardwire cable OBDII Power Cable Main Cable Velcro Tape X2 Configuration Cables 05 06 07 2 Operation 2.4 Turn on Tracker 2.2 Connect the Main Cable 3 Installation After connecting the power, please press the reset button to turn on the device. For first time users, please follow the steps below to complete the pre-installation. 3.1 Installing the Emergency button There is a line of cable for connecting a push button for emergency help. 2.1 Install the SIM card Analog Input (Blue) SOS (Green) Input Negative (Yellow) Main Power (Red) 2.5 Fix the device Ground (Black) Out Input (White) Please pay attention to hand-tighten the fool-proof connector of the cable with tracker. Unscrew the cover of device. Insert SIM card with the copper contacts face-down and the notch on the SIM card at the left side of the SIM slot. Note: Make sure to disable the SIM PIN entry function on the SIM card before inserting your SIM card You could fix the device with the Velcro tape as the picture above. 2.3 Connect the Main Power Analog Input (Blue) Main Power (Red) SOS line (red wire) After installing the SIM card, please screw the back cover.. You could tear down the cover of double side tape and stick to the installation position. Ground (Black) Ground (Black) Out Input (White) M1.7- #00 Ignition Detection Input (Orange) Connect the red wire from the cable to a power source of 9V~36 V. Connect the black wire to ground. 08 3.2 Connecting ignition detection line on Vehicle 09 3.3 Connecting Relay Ground line (Black wire) There is a magnet behind the double side tape. You could install the device to a metal surface. The magnet on the device would attract the metal surface. 10 11 For Motorcycle: For motorcycle rider, the device could be installed at the marked position as the picture as below. For Vehicle: The device could be placed or installed on the marked position as the pictures below. Glove compartment Car Battery Input Negative (Yellow) Analog Input (Blue) Main Power (Red) SOS (Green) To Car Battery+ Cut off Ignition Power Connect with Really Relay Yellow Cable Relay Tracker Ground (Black) Ground (Black) Out Input (White) Lock Relay Black Cable 85 Red 30 87 87a Relay Blue Cable Off ACC lgnition(ON) 86 White (Current limit 300mA) Ignition Detection Input (Orange) Relay Yellow Cable Under dashboard (OBD2 connector) Off Lock Ignition Detection Input (Orange) One end of the button must be connected to the SOS line and the other end must be connected to the ground line. Input Negative (Yellow) SOS (Green) Ground (Black) Connect the white wire from device’s cable to the yellow wire of relay. For the other connections, please refer to the diagram above. ACC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Back of front seat If you’d like to install to the OBDII connector of vehicles, please connect device with the OBDII power cable firstly, then you could connect the OBDII power cable to the OBDII connector of vehicle as the picture below. ● ● ● Ignition On ● 3.4 Installation reminder The antenna(s) used for this transmitter must not be co-located of operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. WARNING: In a confined space of the car, there is a big different temperature between inside and outside of the car. In addition, it is also considerable temperature difference between tracker's interior and exterior. Therefore, if you put a tracker in the car, please make sure to place it with good ventilation. Connect the orange wire from the cable to ACC position of vehicle. Connect the black wire to ground. 12 13 14 13 減少電磁波影響，請妥適使用 內建固定式電池：「消費者不可自行拆卸內建電池，如要拆卸需請專業人士/維修廠商拆卸」 N3PM2GTR388000 N3PM2GTR388001 15 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Title : GTR-388_QSG_N3PM2GTR388001_T2.0_1109 Metadata Date : 2016:11:09 18:42:12+08:00 Modify Date : 2016:11:09 18:42:12+08:00 Create Date : 2016:11:09 16:53:07+08:00 Creator Tool : Adobe Illustrator CC 2017 (Windows) Thumbnail Width : 236 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16377 bytes, use -b option to extract) Instance ID : uuid:50300b8e-864b-4a7a-abdb-4a24e1c5f8b1 Document ID : xmp.did:9630192b-53c3-aa4d-9172-4e7b7e61e1e6 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0fbb1452-a323-0144-8644-78f68bb253f9 Derived From Document ID : xmp.did:0fbb1452-a323-0144-8644-78f68bb253f9 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:3C5BB0F13DA8E0118EE3881B53F465B0, xmp.iid:9630192b-53c3-aa4d-9172-4e7b7e61e1e6 History When : 2011:07:07 10:57:28+08:00, 2016:11:09 16:53:03+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CC 2017 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : \\Design-center\產品外觀\GTR-388\GTR-388_無LOGO-實際CABLE線接頭.png Manifest Reference Document ID : adobe:docid:photoshop:1d5bf4c5-9514-11e6-a276-e89321ced42c Manifest Reference Instance ID : xmp.iid:a48d403a-c881-a64f-9fe7-ef3fd264fdb6 Ingredients File Path : \\Design-center\產品外觀\GTR-388\GTR-388_無LOGO-實際CABLE線接頭.png Ingredients Document ID : adobe:docid:photoshop:1d5bf4c5-9514-11e6-a276-e89321ced42c Ingredients Instance ID : xmp.iid:a48d403a-c881-a64f-9fe7-ef3fd264fdb6 Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 674.511111 Max Page Size H : 836.788889 Max Page Size Unit : Millimeters Font Name : TimesNewRomanPSMT, MyriadPro-Regular, ArialMT, Arial-BoldMT, AvantGardeITCbyBT-Medium, Tahoma, Tahoma-Bold, LinGothic-Light, YenRound-Light, AdobeMingStd-Light, MicrosoftJhengHeiRegular, DFKaiShu-SB-Estd-BF Font Family : Times New Roman, Myriad Pro, Arial, Arial, AvantGarde Md BT, Tahoma, Tahoma, 文鼎細黑, 文鼎細圓, Adobe 明體 Std, 微軟正黑體, 標楷體 Font Face : Regular, Regular, Regular , Bold, Medium, Regular, Bold, Regular, Regular, L, Regular, Regular Font Type : Open Type, Open Type, TrueType, TrueType, TrueType, Open Type, Open Type, TrueType, TrueType, Open Type, Open Type, Open Type Font Version : Version 3.00, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, MS core font:V1.00, MS core font :V1.00, mfgpctt-v1.53 Friday, January 29, 1993 11:41:07 am (EST), Version 2.80, Version 2.80, Version 2.50, Version 2.50, Version 6.007;PS 6.001;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.02, Version 5.00 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False Font File Name : times_0.ttf, MyriadPro-Regular.otf, ARIAL_2.TTF, ARIALBD_1.TTF, AVGARDM.TTF, tahoma_0.ttf, tahomabd_0.ttf, BHEI01L.TTF, BGTR00L.TTF, AdobeMingStd-Light.otf, msjh.ttf, kaiu.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 鮮豔 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 15.00 Creator Version : 21.0.0 Page Count : 2 Creator : Adobe Illustrator CC 2017 (Windows)EXIF Metadata provided by EXIF.tools