GlobalSat WorldCom GTR129S Motorcycle/Vehicle Tracker User Manual GTR 128 GTR 129 QSG 20121101

GlobalSat WorldCom Corporation Motorcycle/Vehicle Tracker GTR 128 GTR 129 QSG 20121101

User Manual

Download: GlobalSat WorldCom GTR129S Motorcycle/Vehicle Tracker User Manual GTR 128 GTR 129  QSG 20121101
Mirror Download [FCC.gov]GlobalSat WorldCom GTR129S Motorcycle/Vehicle Tracker User Manual GTR 128 GTR 129  QSG 20121101
Document ID1855762
Application IDDyWWaAnxoaZVaPZQhF979w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize298.11kB (3726326 bits)
Date Submitted2012-12-10 00:00:00
Date Available2012-12-10 00:00:00
Creation Date2012-11-01 09:54:03
Producing SoftwareGPL Ghostscript 9.04
Document Lastmod2012-12-10 13:31:21
Document TitleGTR-128_GTR-129 QSG_20121101
Document CreatorPDFCreator Version 1.2.3
Document Author: yachi.chen

GTR-128/GTR-129
Motorcycle/ Vehicle Tracker
Quick Start Guide
GlobalSat WorldCom Corporation
st
16F., No. 186, Jian 1 Rd, Zhonghe Dist.,
USGlobalSat Incorporated
New Taipei City 23553, Taiwan
14740 Yorba Court Chino, CA 91710
Tel: 886.2.8226.3799/ Fax: 886.2.8226.3899
service@globalsat.com.tw
www.globalsat.com.tw
Tel: 888.323.8720 / Fax: 909.597.8532
sales@usglobalsat.com
www.usglobalsat.com
CONTENT
1. Introduction ........................................................................................................................ 3
1.1 Introduction ............................................................................................................... 3
1.2 Features ..................................................................................................................... 3
1.3 Hardware specification ............................................................................................ 4
1.4 Appearance ................................................................................................................ 5
1.5 LED indicator ............................................................................................................. 5
1.6 Cable description ...................................................................................................... 6
1.7 Accessories ................................................................................................................ 7
1.7.1 Standard Items ........................................................................................................... 7
1.7.2 Optional Items ............................................................................................................ 8
12V/24V Relay .................................................................................................................... 8
2 Operation .............................................................................................................................. 9
2.1 Install the SIM card ................................................................................................. 9
2.2 Connect the Main Power........................................................................................ 11
2.3 Switch on/off Tracker ............................................................................................. 11
2.4 Fix the device .......................................................................................................... 12
3 Installation.......................................................................................................................... 14
3.1
3.2
3.3
3.4
Installing the Emergency button ......................................................................... 14
Connecting ignition detection line on car .......................................................... 15
Connecting Relay .................................................................................................... 16
Installation reminder ............................................................................................. 17
1. Introduction
1.1 Introduction
GTR-128/GTR-129 is designed as a durable and multi-functional GPS/GSM/GPRS tracker. It
integrates highly sensitive GPS module and quad-band GSM communication module with a
powerful microcontroller that fits into a compact enclosure. The device is capable of being
waterproof and ideal for use in a motorcycle, golf carts and vehicles. It is small in size and low in
cost for covert and efficient tracking device. It provides real-time GPS positions anytime and
anywhere with an open view to the sky, and offers precise positioning, and reports vehicle status
to the server with necessary information shown on the map. Benefits such as enhanced fleet
management, improved vehicle safety, emergency response, are all accomplished through the
implementation of the GTR-128/GTR-129 system. The built-in GSM and GPS antennas are for
easy installation without hassle.
1.2 Features
New generation GPS module.
Compact and Waterproof IP67 design
Built-in high sensitivity GPS/GSM antennas.
Quad-Band GSM System
Built-in motion sensor
AGPS support
Support communication protocols- SMS/TCP/UDP.
Multiple I/Os support: 1 Digital Input for custom function, 1 Digital input for optional
Emergency button, 1 Analog Input for fuel sensor, 1 Digital Output for Relay, 1 Digital Input
for ACC detection.
Configuration and Firmware update via Over-The-Air
Alert functions including Power low/ Over speed/ Movement alarms
Tracking by preferred interval, scheduling and Geo-fence
With magnet (GTR-128) or double side tape (GTR-129) for easy installation
Multiple power solution
1.3 Hardware specification
Item
Description
Model
GTR-128
GTR-129
Back-up Battery
No back-up battery, but
magnetic mount instead
Li-Polymer 320mAh
Unit Weight
77g
78.5g
Temperature
Operation
-30℃ ~ + 70℃
-30℃ ~ + 60℃
(0℃ ~ + 45℃ for charging)
Storage
-40℃ ~ + 70℃
-40℃ ~ + 60℃
Dimension
61 mm X 38 mm X 19 mm
GPS receiver
high performance GPS chipset
Communication
Quad-Band GSM (850/900/1800/1900 MHz)
GPS Antenna
Built-in patch ceramics antenna
GSM Antenna
Built-in Pi-Fa antenna
Protocol
SMS/GPRS (TCP/UDP)
Power
+9~36 V
Built-in Memory
32 Mb
Emergency Input
Negative trigger x 1
Ignition (ACC) Input
Positive trigger x 1
Digital Input Port
Negative trigger x 1
Digital Output Port
Negative trigger x 1 (300 mA)
Fuel sensor Input Port
Analog Input x 1( 0~28V), 12 bits resolution
Sensor
Motion sensor
Humidity
5% to 95% Non-Condensing
1.4 Appearance
LED
For fixing device with Velcro tape
Hook for screw/ unscrew back cover
1.5 LED indicator
Normal mode:
LED status
Red blinking
Red solid
Description
Device is being boot and SIM card not
ready
SIM card ready, but GSM not registered
Yellow solid
GSM registered, but GPRS not connected
Green solid
GSM registered, and GPRS connected
Hiding mode: Device would blink red light while it is booting up. After completing the boot, the
LED would go off.
1.6 Cable description
Wire Color
Description
Green
SOS (Negative Trigger)
Blue
Fuel sensor input (Analog Input, 0~28 V, 12
bits resolution)
Yellow
Digital Input (Negative Trigger)
Red
Main Power, 9~36 V
Black
Ground
White
Digital Output (Negative Trigger), 300 mA
Orange
Ignition Detection Input (Positive Trigger)
Black
Ground
1.7 Accessories
1.7.1 Standard Items
Main Unit
Hardwire cable
Velcro Tape
1.7.2 Optional Items
External Emergency Button
12V/24V Relay
OBDII Power Cable
2 Operation
For first time users, please follow the steps below to complete the pre-installation.
2.1 Install the SIM card
Unscrew the cover of device. Insert SIM card with the copper contacts face-down and the
notch on the SIM card at the right side of the SIM slot.
Note: Make sure to disable the SIM PIN entry function on the SIM card before inserting
your SIM card
After installing the SIM card, please follow the steps below to install the cover back.
Step 1: Please align the latches of the back cover to the indentation of the device.
Step 2: Please push down the back cover to the device.
Step 3: Please screw the back cover.
10
2.2 Connect the Main Power
Connect the red wire from the cable to a power source of 9~36 V. Connect the black
wire to ground.
2.3 Switch on/off Tracker
After connecting the power, please open the back cover and adjust the power switch to ON
position.
11
2.4 Fix the device
You could fix the GTR-128/GTR-129 with the Velcro tape as the picture above.
You could tear down the cover of double side tape and stick GTR-129 to the installation position.
12
You could install the GTR-128 to a metal surface. The magnet on the device would attract the
metal surface.
13
3 Installation
3.1 Installing the Emergency button
There is a line of cable for connecting a push button for emergency help.
One end of the button must be connected to the SOS line and the other end must be connected
to the ground line.
SOS line
(red wire)
Ground line
(Black wire)
14
3.2 Connecting ignition detection line on car
Off
Lock
ACC
Ignition On
Connect the orange wire from the cable to ACC position of vehicle. Connect the black
wire to ground.
15
3.3 Connecting Relay
Connect the white wire from GTR-128/GTR-129’s cable to the yellow wire of relay. For the other
connections, please refer to the diagram above.
16
3.4 Installation reminder
WARNING:
In a confined space of the car, there is a big different temperature between inside and
outside of the car. In addition, it is also considerable temperature difference between
tracker's interior and exterior. Therefore, if you put a tracker in the car, please make
sure to place it with good ventilation.
For Vehicle:
GTR-128/GTR-129 could be placed or installed on the marked position as the pictures below.
If you’d like to install GTR-128/GTR-129 at the OBDII connector of vehicles, please connect
GTR-128/GTR-129 with the OBDII power cable firstly, then you could connect the OBDII power
cable to the OBDII connector of vehicle as the picture below.
17
For Motorcycle
• For motorcycle rider, GTR-128/GTR-129 could be installed at the marked position as the
picture as below.
18
This device complies with Part 15 of the FCC Rules. Operation is subject
to the condition that this device does not cause harmful interference.
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive
1999/5/EC. The following test methods have been applied in order to prove
presumption of conformity with the essential requirements of the R&TTE Directive
1999/5/EC:
EN 60950-1: 2006
Safety of Information Technology Equipment
EN 300 440-1 V1.6.1: 2010
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
range devices; Radio equipment to be used in the 1 GHz to 40 GHz
frequency range; Part1: Technical characteristics and test methods
EN 301 511 V9.0.2: 2003
Global System for Mobile communications (GSM); Harmonized standard for
mobile stations in the GSM 900 and DCS 1800 bands covering essential
requirements under article 3.2 of the R&TTE directive (1999/5/EC)
EN 301 489-7 V1.3.1: 2005
ElectroMagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment ad
services; Part 7: Specific conditions for mobile and portable radio and
ancillary equipment of digital cellular radio telecommunications systems
(GSM and DCS)
EN 301 489-3 V1.4.1 2002
Electromagnetic compatibility and Radio Spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services; Part 3: Specific conditions for Short-Range Devices (SRD) operating
on frequencies between 9 kHz and 40 GHz
Česky
[Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English
Español
[Spanish]
Ελληνική
[Greek]
Français
[French]
Italiano
[Italian]
Latviski
[Latvian]
Lietuvių
[Lithuanian]
Nederlands
[Dutch]
Malti
[Maltese]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr
[udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante
krav i direktiv 1999/5/EF.
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme
tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Hereby, [name of manufacturer], declares that this [type of equipment] is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Por medio de la presente [nombre del fabricante] declara que el [clase de
equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ∆ΗΛΩΝΕΙ ΟΤΙ [type of equipment]
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est
conforme aux exigences essentielles et aux autres dispositions pertinentes de la
directive 1999/5/CE.
Con la presente [nome del costruttore] dichiara che questo [tipo di
apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of
equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un
citiem ar to saistītajiem noteikumiem.
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka
esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott]
jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm
fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Polski
[Polish]
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z
zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Português [Nome do fabricante] declara que este [tipo de equipamento] está conforme
[Portuguese com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami
[Slovenian]
in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky [Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky
[Slovak]
a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
Svenska
[Swedish]
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen
tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse
med de väsentliga egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2012:11:01 09:54:03+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Modify Date                     : 2012:12:10 13:31:21+08:00
Metadata Date                   : 2012:12:10 13:31:21+08:00
Format                          : application/pdf
Description                     : 
Creator                         : yachi.chen
Title                           : GTR-128_GTR-129  QSG_20121101
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:b27d7289-f763-40fe-9910-ec203aa4d9ff
Instance ID                     : uuid:06e24257-1e48-467f-ad5a-8b088ec4bf81
Has XFA                         : No
Page Count                      : 22
Subject                         : 
Author                          : yachi.chen
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RID-GTR129S

Navigation menu