GlobalSat WorldCom TW100 Wearable Watch Tracker User Manual 07 Users Manual R02x

Download:
Mirror Download [FCC.gov]
Document ID	2856698
Application ID	2DVBYZDDIcPzc0B/d/ew6g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	63.78kB (797262 bits)
Date Submitted	2015-12-24 00:00:00
Date Available	2016-02-08 00:00:00
Creation Date	2015-12-24 09:57:05
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2015-12-24 09:57:05
Document Title	Microsoft Word - 07_Users Manual_R02.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	peggy.chang

TW-100
Wearable Watch Tracker
User Manual
Ver 1.0
Table of Contents
Introduction................................................................................................................‐ 1 ‐
Features......................................................................................................................‐ 1 ‐
Specifications .............................................................................................................‐ 2 ‐
Getting Started...........................................................................................................‐ 3 ‐
TW‐100 Device Configuration ....................................................................................‐ 6 ‐
Operation Mode .........................................................................................................‐ 8 ‐
Settings of TW‐100...................................................................................................‐ 10 ‐
FCC Warning.............................................................................................................‐ 15 ‐
CE Warning............................................................................... 錯誤! 尚未定義書籤。
Introduction
TW‐100 is a wearable type of personal tracker that designed in wrist watch style and
intended for safety monitoring for elders and children. TW‐100 equips with both
microphone and speaker that allows hands‐free two‐way communication capability.
Also, the Notification button offers an easy way to make a phone call to those
pre‐set phone books and sends Notification alert together with just a single click. The
device integrates with a back‐end platform services allows user to configure device
remotely and also help user to get understood where the device is immediately or
periodically by sending GPRS/SMS commands to the device.
Features
Quad‐Band GSM/GPRS
2 Way‐Voice communication
Notification button for instant call out and SMS/GPRS alert.
Configurable phone book for making phone call.
Speaker‐phone capability
Regular/Real‐time tracking by remote configuration
Power Low/Off alert via SMS/GPRS
OLED display 96x64 resolution
Support web services for location tracking.
IPX4 waterproof.
Rechargeable Li‐ion battery.
‐1‐
Specifications
Hardware Specifications
Network
Quad‐Band GSM/GPRS
GSM Antenna Type
Monopole antenna
GPS
High Sensitivity GPS
GPS Antenna Type
Patch Antenna 12x12x4
Operating Temperature
‐20°~45°C
Humidity
5% to 95% Non‐condensing
Battery
Rechargeable 320 mAh battery
Hardware Buttons
4 Buttons
Flash memory size
Internal 4MB
Display
OLED display
Charging connector
DC 5V /1A, micro USB
Charging time
Up to 3 Hours
Dimension
47.8mm(D) x 14.3mm(H)
Weight
50g
Speaker/Mic
Yes
Device functions
‐ Location report modes (ping/periodic)
‐ Notification report mode via SMS/GPRS
‐ Preset 3 contacts and 10 white list contacts
allow to call‐in
‐ Speaker phone capability for 2 way voice comm.
‐ Voice monitor function
‐ Auto power saving mode
Waterproof
Support IPX4 Waterproof
‐2‐
Getting Started
•
Included accessories
Micro USB Cable
TW‐100
AC Charger
(Option)
•
Preparing your SIM Card for GPRS‐activation
1. Inform your GSM service provider to activate the GPRS function,
get the APN information, the user name, and user password.
‐3‐
•
Install the SIM Card
1. Please make sure
TW‐100 is power off.
Unlock 4 screws with the
proper screwdriver.
2. Remove the rear cover.
4. Open the SIM card
cover.
5. Carefully make sure the SIM 6. Put the battery on the
card is installed correctly, with original place.
the contact (gold part) of the
SIM card facing downward.
Close SIM card cover and push
it upward (locked).
7. Put the rear cover and
then Lock 4 screws
accordingly.
‐4‐
3. Remove the battery
carefully and then push
the SIM card cover
downward (opened).
•
Charge TW‐100
If you are using the TW‐100 for the first time,
charge the TW‐100 for at least 3 hours. (The
included battery is manufacturer‐approved
for use with the TW‐100. The use of
any other battery might damage TW‐100.)
•
Power TW‐100 On/Off
Power On:
Press and hold the “Power” key for 5 seconds.
The LCD and backlight will turn on.
Power Off:
Press and hold the Power key until the display’s
power off bar fully finishes. Then the LCD and
backlight will turn off.
‐5‐
TW‐100 Device Configuration
8.
1.
5.
2.
6.
3.
7.
4.
Power(Long
click)/Reject /Back
Hold down to power the device on/off.
When there is an incoming call or during a
phone call, press to reject or hang up the call.
In the “Settings Menu”, press to cancel the
setting and back to the last page.
Micro USB Port
Used for charging the TW‐100.
Microphone
Microphone.
Notification (Long
click)/Answer/Confirm
/Menu
Make sure UI is displayed first. Hold to send a
notification message to the assigned phone
number and make a notification call to the
assign number.
When there is an incoming call, press to answer
the phone call.
Press to enter into the “Settings Menu”. In
“Settings Menu”, press to confirm that setting.
Speed Dial #1(Long
click)/ Increase Volume/
Up/Clock Switch
Hold the button down to call the speed dial #1.
During a phone call, press this button to
increase the volume level.
In “Settings Menu”, pressing this button will
‐6‐
scroll up.
Short press the button to switch to the other
kind of clock.
LCD
LCD.
Speed Dial #2 (Long
click)/Decrease
Volume/Down/Clock
Switch
Hold the button down to call the speed dial #2.
During a phone call, press this button to
decrease the volume level.
In “Settings Menu”, pressing this button will
scroll down.
Short press the button to switch to the other
kind of clock.
Speaker
Used for listening to the other party during the
phone call.
‐7‐
Operation Mode
General Icons
This icon would be displayed, when
you call someone but it fails.
This icon would be displayed, when
the phone call is ended.
Battery is being charged.
Battery is fully charged.
Battery capacity is very low.
This icon would be displayed when
the alarm clock is triggered.
Text Info
It will show the local time after your time zone is
Local Time
selected on the server. You could refer to the
‐8‐
details in the chapter of Settings of TW‐100.
Shows the present date. When TW‐100 is used
for the first time, the date is set to factory
Date
settings. You could refer to the details in the
chapter of Settings of TW‐100.
This icon would be displayed if you enable one of
Alarm Status
the alarm settings.
The more bars that are visible, the stronger is the
GSM Signal
signal. If you don’t install SIM card in TW‐100, the
GSM signal bars would turn white.
The more bars that are visible, the more is the
Battery Capacity
battery capacity.
‐9‐
Settings of TW‐100
In operation mode, you could press “
Up” or “
Down” or “
access to the “Setting Menu.”
There are 7 settings in the “Setting Menu” as shown below.
1) Time
2) Alarm
3) Ringtone/Volume
4) Language
5) Power Saving
6) Restore Factory Setting
7) About
‐ 10 ‐
Confirm” key to
1) Time
Use
or
to reach “Time” setting and press
(Confirm). There are 2
selections for the “Time” setting: “Auto time adjust” and “Time Setting”.
“Auto time adjust”
Complete the time zone setting on the server.
Use
or
to reach “Auto time adjust” and press
Use
or
to reach “Enable” and press
(Confirm).
(Confirm). “Done” would be
displayed on UI.
TW‐100 would show the time according to UTC time + time zone hour after
TW‐100 is rebooted.
“Time Setting”
Use
or
to reach “Time Setting” and press
(Confirm).
Use
or
to reach the number which you want and press
(Confirm)
to set Year/Month/Day.
Use
or
to set the format of 24 hours or of 12hours and press
(Confirm).
Use
or
to reach the number which you want and press
to set Hour/Minute. “Done” would be displayed on UI.
‐ 11 ‐
(Confirm)
2) Alarm
Use
or
to reach “Alarm” setting and press
(Confirm). You could set 5
sets of alarm clock.
Use
or
to reach one of the clock settings and press
(Confirm).
Use
or
to reach “Enable” and press
Use
or
to reach the number which you want and press
(Confirm).
(Confirm)
to set Hour/Minute. “Done” would be displayed on UI. For example, you set
3:30 as your alarm setting. You would see 03:30‐am ON displayed on UI.
You could disable this clock setting by using
setting 03:30‐am ON and press
And then use
or
or
to reach the above
(Confirm).
to reach “Disable” and press
(Confirm). “Done”
would be displayed on UI. You would see 03:30‐am OFF displayed on UI.
You could follow step 1 to 5 to set more alarm settings or disable them.
3) Ringtone/Volume
Use
or
to reach “Ringtone/Volume” setting and press
(Confirm). There
are 2 selections for the “Ringtone/Volume” setting: “Ringtone” and “Volume”.
“Ringtone”
Use
or
to reach “Ringtone” setting and press
Use
or
to reach the ringtone you prefer. TW‐100 would play the
‐ 12 ‐
(Confirm).
selected ringtone. Press
(Confirm) to select it. “Done” would be displayed
on UI.
“Volume”
Use
or
Press
to reach “Volume” setting and press
to increase or
your volume level, press
(Confirm).
to decrease the volume level. When you reach
(Confirm). “Done” would be displayed on UI.
P.S. You could adjust the volume of TW‐100 during the call.
4) Language
Use
or
to reach “Language” setting and press
(Confirm). There are 2
selections for the “Language” setting: “English” and “簡体中文 (Simplified
Chinese)”.
Use
“English”
or
to reach “English” setting and press
would be displayed on UI.
You would see your UI language is changed to English.
‐ 13 ‐
(Confirm). “Done”
z
“簡体中文”
Use
or
to reach “簡体中文” setting and press
(Confirm). “Done”
would be displayed on UI.
You would see your UI language is changed to Simplified Chinese.
5) Power Saving
Power saving is for reducing the power consumption by setting the time of LCD off
without any key press.
or
Use
to reach “Power Saving” setting and press
(Confirm). There are
4 selections for the “Power Saving” setting: “off”, “5 seconds”, “15 seconds” and “30
seconds”.
Use
or
to choose which setting you prefer and press
(Confirm).
“Done” would be displayed on UI.
6) Restore Factory Setting
Use
or
to reach “Restore Factory Setting” setting and press
(Confirm)
two times. It would be automatically rebooted and restore factory setting.
7) About
Use
or
to reach “About” setting and press
(Confirm). You could see
TW‐100 SW version, IMEI, server name, server port number, APN and report interval.
After you change the settings above by the server’s command, you could check your
setting here.
‐ 14 ‐
FCC Warning
FCC RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. The exposure standard for wireless devices
employs a unit of measurement known as the Specific Absorption Rate (SAR). The
peak spatial‐average SAR limits for general population/uncontrolled exposure is 1.6
W/kg averaged over any 1 gram of tissue, with the exceptions for the parts of the
human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae,
where the peak spatial‐average SAR limit is 4 W/kg, averaged over any 10 grams of
tissue. Tests for SAR are conducted using standard operating positions accepted by
the FCC with the device transmitting at its highest certified power level in all tested
frequency bands. The FCC has granted an Equipment Authorization for this device
with all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines.
FCC Part 15. 19 Labelling requirement.
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐ Consult the dealer or an experienced radio/ TV technician for help.
‐ 15 ‐
FCC Part 15.21 Warning
Notice:
Any changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
‐ 16 ‐

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2015:12:24 09:57:05+08:00
Create Date                     : 2015:12:24 09:57:05+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 07_Users Manual_R02.docx
Creator                         : peggy.chang
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:1564d926-5586-458c-8f77-28f0811af99c
Instance ID                     : uuid:23f2367d-b8fb-4cc4-b54b-98dbb26474cc
Page Count                      : 18
Author                          : peggy.chang

EXIF Metadata provided by EXIF.tools