Glue HUBV1 GLUE WI-FI HUB User Manual installation

Glue AB GLUE WI-FI HUB Users Manual installation

Users Manual - installation

DOWNLOAD THE APP
For any help or support visit
www.gluehome.com/support
Thank you for purchasing this Glue Smart lock (GL04X.CX) and Glue Wi-Fi
Hub (GL01X.CX)
Handling Guidelines
• You should only use your Glue Smart Lock in conjuncon with the Glue Wi-Fi Hub
– this ensures that the Glue Smart Lock will perform as designed, with maximum
security and funconality.
• It is your responsibility to ensure that unauthorised persons do not have access
to your account with Glue. We strongly recommend all Glue Smart Lock users to
use PIN code protecon with all mobile devices on which the Glue applicaon is
installed.
• Please retain all instrucons, packaging and installaon tools.
• Before using the Device(s), familiarize all users with how the Device(s) and our
services work and make sure that all users have read and understand our Terms
of Purchase, Terms of Use and Privacy Policy. If you have any quesons, please
do not hesitate to contact the Glue team through our website at www.gluehome.
com/support
• The Device(s) and our services are most eecve and will perform as designed,
if your home Wi-Fi network is funconing. If your home Wi-Fi network is not
funconing, the Glue Smart Lock will funcon via Blue tooth communicaon only
when the user’s phone is within a range of 3 metres.
• The Glue Wi-Fi Hub should be placed in a locaon where it is able to have
unimpeded communicaon with the Glue Smart Lock.
• The Glue Wi-Fi Hub should be located no less than 1 metre and no greater than 5
metres from the Glue Smart lock.
• Ulise your Glue Smart Lock in accordance with recommendaons set out for
physical key usage by your household insurer.
• Wipe the Glue Smart Lock with a so damp cloth to clean. To clean the Glue Wi-Fi
Hub, remove from the power socket and wipe body only with a so DRY cloth.
Baery Handling
• Ensure that the baery replacement warnings on the app are adhered to as
instructed.
• Baeries are to be installed as instructed – take care not to put the baeries in to
the product in the wrong orientaon. The + and – icons on the baery should be
orientated in accordance with the + and – icons in the base of the baery housing.
• When inserng the baeries, it is easiest to insert the negave (-) end rst.
• Only standard 1.5V AA baeries should be used with the Glue Smart Lock,
rechargeable baeries are not suitable for use.
• When replacing the baeries, ensure that the ribbon is correctly placed underneath
the baeries with the end of the ribbon exposed – to enable you to remove the
baeries with ease on the next occasion.
• If the Glue Smart Lock is to be unused for an extended period of me, please
remove the baeries to help protect against baery leakage.
• To disconnect your Glue Smart Lock, remove all the baeries.
• To disconnect your Glue Wi-Fi Hub, either switch o at the power socket or remove
from the power socket.
Restricons of use
• The Glue smart lock is rated at 6V DC. This Glue Wi-Fi Hub is rated at 110 – 120V
AC 50/60 Hz only.
• The Device(s) should be used and stored between the following temperatures 14⁰F
and 104⁰F.
• Ensure that the Device(s) are not located in direct sunlight for prolonged periods
of the day.
• The Device(s) should not become wet during use.
• Ensure that the Device(s) are not used in excessively dusty environments.
• The Device(s) must not have been misused, abused, disassembled or modied in
any way.
• This device is veried to comply with part 15 of the FCC Rules for use with cable
television service.
• This device complies with part 15 of the FCC Rules. Operaon is subject to the
following two condions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference
that may cause undesired operaon.
• Please note that changes or modicaons not expressly approved by the party re-
sponsible for compliance could void the user’s authority to operate the equipment.
• Please note that changes or modicaons not expressly approved by the party re-
sponsible for compliance could void the user’s authority to operate the equipment.
Compliance informaon
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal installaon. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instrucons, may cause harmful interference to radio communica-
ons. However, there is no guarantee that interference will not occur in a parcular instal-
laon. If this equipment does cause harmful interference to radio or television recepon,
which can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radio-frequency Radiaon Informaon
• This equipment complies with radio frequency exposure limits set forth by the FCC
for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 5 cm
between the device and the user or bystanders.
• This device must not be co-located or operang in conjuncon with any other an-
tenna or transmier.
Transmier Antenna for Licence-Exempt Radio Apparatus Informaon
• This radio transmier IC:21878-LOCKV2 & IC:21878-HUBV1 has been approved
by Industry Canada to operate with the antenna types listed below with the max-
imum permissible gain indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited
for use with this device.
• Le présent émeeur radio IC:21878-LOCKV2 & IC:21878-HUBV1 a été approu-
vé par l’Industrie du Canada pour fonconner avec les types d’antenne énumérés
ci-dessous et ayant un gain admissible maximal. Les types d’antenne non inclus dans
cee liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement
interdits pour l’exploitaon de l’émeeur.
Noce for Licence-Exempt Radio Apparatus
• This device complies with Industry Canada’s licence-exempt RSSs. Operaon is sub-
ject to the following two condions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operaon of the device.
• Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux ap-
pareils radio exempts de licence. L’exploitaon est autorisée aux deux condions
suivantes:
(1) l’appareil ne doit pas produire de brouillage;
(2) l’ulisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est suscepble d’en compromere le fonconnement.
• This equipment complies with radio frequency exposure limits set forth by the
Industry Canada for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20 cm
between the device and the user or bystanders.
• This device must not be co-located or operang in conjuncon with any other
antenna or transmier.
• Cet équipement est conforme aux limites d’exposion aux radiofréquences dénies
par l’Industrie du Canada pour un environnement non contrôlé.
• Cet équipement doit être installé et ulisé avec un minimum de 20 cm de distance
entre le disposif et l’ulisateur ou des ers.
• Ce disposif ne doit pas être ulisé à proximité d’une autre antenne ou d’un autre
émeeur.
Innovaon, Science and Economic Development Canada ICES-003 Compliance Label
CAN ICES-3 (B)/NMB-3(B)
Please read these instrucons, our Terms and Condions and our Privacy Policy carefully
and make sure that you understand them, before you start using the Device(s). Our Terms
and Condions and Privacy Policy can be found at our website, www.gluehome.com.
By downloading the Glue applicaon and registering an account with Glue you
acknowledge that you have read, agreed to and accept the Terms and Condions and
Privacy Policy and commits to adhere to them. Please note that Glue may update the
Terms and Condions and Privacy Policy from me to me, in accordance with the Terms
and Condions and Privacy Policy.
CONTENTS
INSERTS
DOOR PLATES
INSTALLATION
TEMPLATE
GLUE LOCK
YOU WILL USE THESE PARTS
DURING INSTALLATION
HEX KEY SCREW
DRIVER
YOU WILL USE ONE OF
EACH OF THESE PARTS
GLUE SMART LOCK GLUE WI-FI HUB
SKU01.13/14/15 20161206 US/CA FCC
INSTALLATION GUIDE

Navigation menu