GoPro GVRC1 REMOTE User Manual

GoPro, Inc. REMOTE

Contents

User Manual

REMO (WATERPROOF VOICE ACTIVATED REMOTE)CONTROL YOUR HERO5 CAMERA WITH YOUR VOICE FROM UP TO 33FT (10M) AWAYUSER GUIDE
1. Battery Status Light2. Power Button3. Shutter Button4. Wireless Status Light (blue) / Remo Status Light (red) To use all of the features described in this guide, update the software on both Remo and your GoPro. STEP 1 Download GoPro for Desktop from gopro.com/getstarted.STEP 2 With Remo powered off, connect it to your computer.STEP 3 Press and hold the Shutter button for 8 seconds until the battery status light turns off.STEP 4 Open GoPro for Desktop and follow the on-screen instructions to update Remo.STEP 5 Update your camera software. For details, see the user manual for your camera.THE BASICSUPDATING REMO + CAMERA1432POWERING ONPress and hold the Power button.Note: Beeps and lights mimic those on the camera.POWERING OFFPress and hold the Power button.POWERING ON + OFFBattery status light turns red when Remo needs charging.Fully charged in 80 minCHARGING3 sec5 sec
PAIRING + SELECTING A LANGUAGEStep 1 Press the Mode button to get to Connection Settings, then select Connect New Device > Remo. Step 2 With Remo powered off, press and hold the Power button until the blue light blinks. Remo vibrates once when pairing is complete.Step 3 If the language option appears on the camera, select the language that you want to use. Otherwise, Remo uses the language that you previously selected when using Voice Control on your camera.Note: To change the Voice Control language, connect your camera to the Capture app. For details, see the HERO5 Session User Manual.PAIRINGStep 1 On the camera, swipe down and then tap Connectivity > Connect New > Remo.Step 2 With Remo powered off, press and hold the Power button until the blue light blinks. Remo vibrates once when pairing is complete.SELECTING A LANGUAGEStep 1 Swipe down and then tap Preferences > Language (in the Voice Control section).Step 2 Tap a language.SETTING UP HERO5 BLACK + REMO8 sec8 secSETTING UP HERO5 SESSION + REMOSTEP 2 While facing Remo, say a command from the list on the next page. Remo vibrates, beeps, and blinks when the command is understood.PRO TIP: With Remo, you can say any command at any time. For example, if the camera is in Video mode and you want to capture burst photos, just say “GoPro shoot burst.”STEP 1 Turn on wireless on your camera. For details, see the user manual for your camera. STEP 2Power on both devices to connect them. The wireless status light on Remo blinks slowly (blue).Note: You do not need to turn on your camera’s Voice Control feature to use Remo.If the connection to the camera is lost, Remo emits a disconnection beep and the wireless status light blinks quickly. For best results, be sure that your camera and Remo are not blocked by walls or other obstacles.CONNECTING REMO + YOUR CAMERACONTROLLING YOUR CAMERATo control your camera with your voice, use the commands listed on the next page. Remo has a range of 33ft / 10m and is waterproof to 16ft / 5m.Note: Voice Control performance may be impacted by distance or significant wind and noisy conditions. Keep the product clean and clear of debris.STEP 1 Power on Remo. [show clip mounted to collar and person speaking in to Remo, or show Remo on wrist strap and user bringing wrist to mouth to speak]3 sec
LIST OF COMMANDSACTION COMMANDS DESCRIPTIONGoPro start recording Captures videoGoPro HiLight Adds a HiLight Tag to videoThat was sick Adds a HiLight Tag to videoGoPro stop recording Stops capturing videoGoPro take a photo Captures a single photoGoPro shoot burst Captures burst photosGoPro start time lapse Captures Time Lapse photosGoPro stop time lapse Stops capturing time lapse photosGoPro turn off Powers off the cameraMODE COMMANDS DESCRIPTIONGoPro Video mode Changes the camera mode to Video (does not capture video)GoPro Time Lapse mode Changes the camera mode to Time Lapse (does not capture time lapse photos)GoPro Photo mode Changes the camera mode to Photo mode (does not capture photos)GoPro Burst mode Changes the camera mode to Burst mode (does not capture burst photos)PRO TIP: When Remo and the camera are on, you can press the Shutter button on Remo to begin capturing in the camera’s current mode.For the most updated list of commands, visit gopro.com/help. When your camera is off, you can quickly capture video and time lapse photos using the Shutter button on Remo.STEP 1 On your camera, press the Mode button to power it on.STEP 2 Say, “GoPro turn off” to power off your camera.If Remo isn’t responding as expected, press and hold both buttons at the same time to reset it. Note: If you reset Remo, you need to re-pair it with your camera.RESETTING REMOQUIKCAPTURETo see additional information regarding country certifications, refer to the Important Product + Safety Instructions included with Remo.REGULATORY INFORMATIONSTEP 3 During your activity, use Remo for QuikCapture:• For video, press the Shutter button on Remo. • For time lapse photos, press and hold the Shutter button.PRO TIP: Once you power on your camera with the Mode button, then power it off with the Remo command, just say “GoPro turn on” to power it on again.8 sec 8 secGREEN SHADING = DO NOT TRANSLATE!
130-18757-000 REVALearn more about GoPro products at gopro.com

Navigation menu