Golden Technology Electronic Toys 8063498036 Remote Control Toy Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	597539
Application ID	f4cXnOxOYlkuhGb6qgGm/w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	259.36kB (3241984 bits)
Date Submitted	2005-10-31 00:00:00
Date Available	2005-10-31 00:00:00
Creation Date	2005-10-26 10:43:51
Producing Software	Adobe Photoshop for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual
Document Creator	Adobe Photoshop 6.0

INSTRUCTIONS
1. Preparation
1) Place the antenna into the hole at the top of the controller.
Turn clockwise to secure the antenna onto the controller (Figt).
DO NOT OVER-TIGHTEN. Pull tip of the antenna to extend.
Car Chassis “9 7
2) Use the adjust lever (Fig 2) by the front end
of the car chassis. to adjust the car straight-line
running performance. (R for right, L for left)
Adluet
Lover
. Fig 2
2. Battery installation
1) Remove the lid of the battery compartment of the RIC toy car. install 4 AA batteries,
then replace the lid and turn the“Finn Button" to fix the battery cover. (Fig 3)
2) Remove the lid of the battery of the controller, install 2 AA batteries, then replace the lid. (Fig 4)
(Notice: Batteries are to be lnaerted with the correct polarity.)
Fig 3
3. Operation Instructions
1) Spread the antenna on the controller to the very
end for a full signal. Twine" ,
2) Tum the switch of the car chassis to on (FigZ), the ‘ "““°"°' ”9“
inner circuit is then powered but thecar remains still. ‘ ' "
3) When the batteries are installed into the controller. its
inner circuit is than powered. Turn the switch to ON,
the controller will sound while operating. Turn the
switch to OFF. the controller is still powered but
without sound.(Fig 5)
Sound Switch
Control Key
i Notice' if there's no “sound“ letters
FIgS showingontheswitctheswitd'i
then indicates power ONIOFF
instead of sound function)
4) Push the control key on the controller slightly upward, the
car will move backward. if push the
control key to the very end. the car will reach to its top speed.
Slightly pull the control key
backward, the car will move forward. it pull it to the very end.
the car will reach to its top speed. (Fig 6)
left lights on
uo was" new
right lights on
Q .
5) When pushing or pulling the control key, turn the revolver (L N ( >P
button clockwise at the same time. the car will tum right (j ”E4
forward or right backward. While turn the revolver button Front Light Back Ught
anticlockwise, the car will turn lett forward or Ieh backward. simulating one indicator lights
(Fig 6.7.8) Fig 1
6) if the control key levers are released. the car will stop all moves.
7) Turn the power switch on the car to OFF after use.
8) Remove all batteries from the car and the controller before storing for a long time.
3. Cautions
1) ”Transformers or battery chargers used with the toy are to be raguiariy examined for
damage to cord, plug enclosure and other parts: and in the event of such damage. toy
must not be used with the transformer or battery charger until such damage has been
repaired'
2) ‘Staied that the toy is to be assernbied by childladuil’
3) “Stateroom lhei wired is not to be inserted into socket cutlets'
‘) “Non-rechargeable batteries are not to be recharged."
5) ‘Rechargeable batteries are to be removed from the icy before being charged."
8) ‘Rechargeable batteries are only to be charged under adult supervision '
7) ‘Oifierenitypesolbaitenesornewand used batieriesare notto bemixed'
8) 'Onlybatterieeefthesaneorequivelenltypeasrecornrnendedaretobeused.‘
9) “Exhausted batteries are to be removed from the toy."
10) 'The supply terminal is not to be short-drum“
it) “Battery teysintendedtobe used inwelershalistate that it'sopereted in watereniy
when fury assembled in accordance with ihe nnstmcoons'
12) 'Toy must be used with the recommended charger.“
13) 'Thechargerianota toy“
it) ”Toy liable to be cleaned with liquid is to be disconnected from merger before
cleaning "
ATTENTION'OO NOT THROW THE COLOR BOX AWAY WHEN THE CAR CAN STILL BE USED
THE CHARGING TIME OF THE BATTERY Is ONLY 2-3 HOURS!
The normal function of the product may be dislurbed by strong Electro Magnetic interference.
if so, simply reset the produd to resume normal operation by following the instruction manual.
lncese thehinmon could notresurne. please use lheproductinolherlocaiion
(E a MADE m CHINA
NO.8036
Note:
This equipment has been tested and found to comply with
the limits for a Class 8 digital device. pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against hannful interference in a
residential installation.This equipment generates. uses
and can radiate radio frequency energy and. if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However. there is no guarantee that interference will not
occur in a particular installation. if this equipment
does cause harmful interference to radio or television
reception. which can be determined by turning the
equipment off and on. the user is encouraged to try to
correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
NOTE :
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE PAUSED EV UNAUTHORlZED
MODIFIQTIONS TO THIS EQUIPMENT SUCH WOIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE
Tu: chi llm‘m
FCC IDIOK XBOGNSSOJG
MADE IN CHINA
This device compfles with part 15 of the FCC
Rules. Operation is sub)eci to the following two
condllons: it) this device may not cause harmful
interference. and (2) this device must accept any
interference received. Including interference that
may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Warning                         : Error inflating stream
Page Count                      : 1
Creator                         : Adobe Photoshop 6.0
Create Date                     : 2005:10:26 10:43:51+08:00
Producer                        : Adobe Photoshop for Windows

EXIF Metadata provided by EXIF.tools