Golden Vision Technology Developing G3604B1080PH Full VR / Panoramic Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3280486
Application ID	62ufX3KZfNeni2ASHbgKGg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	106.28kB (1328494 bits)
Date Submitted	2017-02-10 00:00:00
Date Available	2017-02-11 00:00:00
Creation Date	2016-12-13 17:01:40
Producing Software	Corel PDF Engine Version 17.0.0.491
Document Lastmod	2017-02-04 20:04:23
Document Title	Users Manual
Document Creator	CorelDRAW X7
Document Author:	Administrator

Quick Guide for Watching
Mode 2:AP mode configuration
First, user should make sure
that the Mobile phone has
already connected to the proper
WIFI router Access point
1.Softwara installation&download and
install APP for smart phones
Search "V380"in the App Store
install app
Step 1:
Click the "WIFI Smart Link"
Menu,the ul show as below
picture:
APP
苹果手机
1.Open the phone WIFI,
Hot spots of connection

equipment(MV* is a hot

spot at the beginning).
Step 2:
lnput the Access point Router’s
password (make usre that its
SSID is correct)and click the
"Next"botton
Search "V380"in Google play
install app
Mode 3:Quick AP config(this mode can not be suported by iphone
iphone user have to connect the camera AP by manual
With AP Mode selected,please
click "Device Unlinked"on your
app,click "AP Quick Setup"and
the device will be appeared.
(Because the default setting of
outdoor cameras is AP Hotspot
Mode,please long-press the
Reset key to activate AP Hotpot
Mode.)
2.On APP, click"Add
networking equipment"
安卓手机
After you done that,the WIFI Camera will try to connect the Access Point Router with the SSID
and password you have inputed.The prosess will take 30~60 seconds after the WIFI Camera
connect the WIFI Access Point router successfully the WIFI Camera ID will be added to the devi
ce list Last,you can click the item on the device list,then you can see the live video
2.User registration / login
3.Configuration and watch
Mode 1:WIFI Smartlink
Deives which support Smartlink configuration can issue a voice prompt"waitting for wifi smartlink
configuration".The default setting of Other devices like outdoor cameras is AP
Hotspot Modeand it
can be configured accourding to "AP Quick Configuration"or "Hotspot Configuration".
Important Note:
1.The WIFI Camera default Mode is:WIFI smart Link
2.if you want to change the WIFI router,you need to reset the
WIFI Camera:Push the WIFI Camera "Reset"button for10
seconds(some model PTZ Camera’s reset button at the
Bottom of the Camera),then the Camera will restore the
default setting.
3.You can set the Camera to work as the independed Access
Point(Hotpot)by push the "reset"button on the camera for
1~2 seconds if the Camera smartlink mode,or change the
mode by APP’s "Network setting"
①
①Image capture
②
③
④
⑤
②Sound monitoring ③Voice intercom
④Lens direction ⑤Image mode
3.Click on the "local search", search out the equipment after clicking "add selected equipment",
click "add equipment, equipment configuration and network settings, check the" station mode ",
select the WIFI router, and fill in the router's WIFI password, and save, hear the voice prompt"
routing connection equipment complete the "complete configuration
4.Video playback
5.Device settings
6.Static IP configurantion:
Equipment can be static IP is set to manual configuration or automatic configuration
6.More functions
7.Version information:
able to obtain information of device system and hardwate
Choose device
After choosing device,
you can configure it.The
introduction to various
funtions is as follows
Mobile phone alarm notice
setting
View,to share,delete pictures,
view,delete the vidro
Server Area Selection
Check device configuration
insturction and FAQS
Setting the APP’s password
Serach the record files
1.Network Setting:
AP mode and station mode can be interchanged;
AP mode: Set the Camera work as a independed Access Point(Hotpot),(The wifi Camera work
as a WIFI Access Point,the prefix is"MV",ex,"MV31000000")
Station mode: Set the Camera work as wifi station,the camera will connect the wifi router you
selected and you can access you camera by internet
The record files
Update latest versionof APP
automatically online
1.Network Setting
2.Record Setting
3.Alarm&Prompt
7.Modify and delete
2.Record Setting:
automatic record: continuius recording;
record-on-alarm: record with alarm event;
audio record: record the sound;
record resolution: standard-definition(VGA),high-definition(720P/960P)(choose high-definition
record,with big record files and short storage time in memory card)
playback
mode
progress
bar
sound
next
lasr
Record playback
screenshot
1.Delete:able to delete one device entry individually
2.Edit: able ti modify ID number,username and password
of the device(if you enter error username and password,
you can modify it here directly,rather than adding another
device entry)
3.Alarm&Prompt:
disarm switch: close or Open the alarm;
voice masrer switch: master switch for all voice prompts;
alarm voice prompts: switch for movement alarm voice;
voice language: enable the voice prompts
3.Arm: Protection,removal of equipment can be
4.Megs: playback the snap picute
4.Date&Time:
able to adjust time of device;
5.User Management:
able to modify the username and password of camera
stop/play
5. Long press the device ID to proceed bulk deletions(On
the android mobile phones do not support this operation)
4.User Management
5.Static IP
Configuraton
6.Detect update
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: 1) this device may not cause harmful interference, and 2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution：Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Administrator
Title                           : V380全景摄像机快捷说明书英文版.cdr
Create Date                     : 2016:12:13 17:01:40+08:00
Creator Tool                    : CorelDRAW X7
Modify Date                     : 2017:02:04 20:04:23+08:00
Metadata Date                   : 2017:02:04 20:04:23+08:00
Producer                        : Corel PDF Engine Version 17.0.0.491
Document ID                     : uuid:cc747729-b4da-428b-9896-aead6ee2e70c
Instance ID                     : uuid:b316d98c-0629-4bec-82d1-071f3c07f14a
Page Count                      : 2
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Author                          : Administrator

EXIF Metadata provided by EXIF.tools