Golden Vision Technology Developing XYTA-R9820-F4 WIFI Smart Camera User Manual EN 20180726 FCC

Download:
Mirror Download [FCC.gov]
Document ID	3960495
Application ID	6DNY2N88NXGmjMRjHmUeaA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.16kB (152025 bits)
Date Submitted	2018-08-11 00:00:00
Date Available	2018-08-11 00:00:00
Creation Date	2018-08-01 17:50:09
Producing Software	Corel PDF Engine Version 17.0.0.491
Document Lastmod	2018-08-01 17:50:09
Document Title	云蚁EN-20180726+FCC.cdr
Document Creator	CorelDRAW X7
Document Author:	Administrator

Basic Parameters
1.Product introduction
Packing list: YI IOT Smart Camera × 1, Manual × 1, USB Power Cord × 1,
Power Adapter × 1,Screw Accessories Package x 1
YI IOT
Thank you for using YI IOT smart camera
Product Name:YI IOT Smart Camera
Lens: 110°wide angle
Pixel:2.0MP
Video Compression: H.264 High Profile
Image Enhancement: Digital Wide Dynamic 3D Noise Reduction
Local storage: MicroSD card
Wireless Encryption: WEP/WPA/WPA2 Encryption
Power input: 5V 1.6A
Total power consumption: 3.5W (Max)
Wireless standard: 2.4G 802.11 b/g/n
Support Platform: Android/iOS
3. Add The Device
2.Install APP
Download APP: scan the QR code below to download and install.
Register and login: open the YI IOT APP to registerand login according
to the prompts.
5.Matters Need Attention
4.APP Video Browsing Details
Please make sure that there is a available Wi-Fi and the Internet is
connected.
Find the USB port on the bottom of the device and plug in the power cord
to power it on,please wait 20 seconds until you hear "DiDiDi"
Then go to APP home page, click the "+" on the main screen,Configure
according to the instructions in the APP. You can configure multiple
cameras at the same time
Try to keep away from the metal space;
Avoid the furniture , microwave oven blocked;
Avoid the space where the audio, video and data lines are wound, and
⑤
⑥
①
②
③
④
keep the space away from them as large as possible;
Ensure that as close as possible to the coverage of wireless Wi-Fi
⑦
⑧
⑨
⑩
In the new network environment, please press the reset hole about 5
seconds, After hearing the horn sounds short voice and then connect
Manual
to the network。
YI IOT Smart Camera
YI IOT
USB Power Cord
Thank you for using YI IOT smart camera
Screw Accessories Package
Power Adapter
Component description
Reset Button Press and hold Reset for about 5 seconds. When the horn
sounds short voice, the reset is successful.
It is recommended to insert 8-64GB high-speed Micro SD card, otherwise
it will not be able to store, view historical video and support Important
functions such as firmware upgrading.
01
02
03
①Preview mode
⑤More settings
⑨Snapshot
②Recording
⑥Cloud Storage
⑩History file(Make sure
③Mute button
⑦Floating window
④Intercom button
⑧Full screen preview
04
insert Micro SD card )
05
Maintenance voucher of intelligent
YI IOT Smart camera Three packs of certificates
The YI IOT Smart camera after-sales service is strictly based on the "People's Republic of China Consumer Rights Act" and "China The “Product
Quality Law of the People’s Republic of China” implements the after-sale
s three-package service. The service content is as follows:
1. Within 7 days from the date of your receipt, this product has a performance failure listed in the "Product Performance Failure Chart"The
situation is determined by the after-sales service center, and return or
replacement service can be enjoyed for free;
2. Within 8 to 15 days from the date of your receipt, this product has the
performance listed in "Product Performance Failure Table"The fault
condition is determined by the after-sales service center and can be
exchanged for free or repaired service;
3. Within 12 months from the date of your receipt, this product hasexperienced the performance failures listed in the “Product Performance
Failure Table” The situation is determined by the after-sales service
center and free repair service is available.
Product performance failure table
The name and content of the harmful substances in the product
Maintenance records：
Maintenance records：
Customer:
Maintenance time：
Maintenance time：
Address:
Fault conditions：
Fault conditions：
Fault cause：
Fault cause：
Trouble shooting：
Trouble shooting：
Return and exchange proof：
Return and exchange proof：
Date of validity：
Date of validity：
Original device ID：
Original device ID：
New device ID：
New device ID：
4.Does not meet the performance failures listed in the "Product Performance Failures";
maintenance personnel signature：
maintenance personnel signature：
5.Due to human factors, this product and its accessories have caused the
performance failures listed in the “Product Performance Failure Table”.
Maintenance Department seal：
Maintenance Department seal：
name
Harmful Substance
Performance failure
Damaged shell due to structural or material problems
YI IOT The new device cannot be turned on normally.
The new device can not take video, connect the phone, the
Smart button is invalid (inserting Mirco SD card)
Camera
New device camera image fuzzy imaging abnormality, abnormal video
Part
Name
Pb
Hg
Cd
Cr(VI)
PBB
shell
○
○
○
○
○
Board
○
○
○
○
charger
○
○
○
○
○
annex
○
○
○
○
○
This form is based on the provisions of SJ/T 11364。
PBDE
○
○
○
○
2.Has exceeded three packs of validity；
This product conforms to RoHS environmental protection requirements.
At present, there is no mature technology in the world to replace or
reduce the lead content in the electronic ceramics. porcelain, optical
glass, steel and copper alloy.
Model:
camera ID:
Device store:
Date of purchase:
Store contact number:
Maintenance voucher of intelligent
Customer:
Model:
camera ID:
Device store:
Date of purchase:
Store address:
Store contact number:
08
09
Mobile:
Address:
3.Damage caused by force majeure;
07
Mobile:
Store address:
Non warranty regulation
1.Unauthorized repairs, misuse, collisions, negligence, abuse, fluids,
accidents, alterations, inaccuracies Use accessories other than this product, or tear, alter stickers, security labels
signals. Switching network environment;
06
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator &
your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2018:08:01 17:50:09+08:00
Modify Date                     : 2018:08:01 17:50:09+08:00
Producer                        : Corel PDF Engine Version 17.0.0.491
Author                          : Administrator
Creator                         : CorelDRAW X7
Title                           : 云蚁EN-20180726+FCC.cdr

EXIF Metadata provided by EXIF.tools