Golfzon UDR-100IF Low Power Communication Device User Manual ver2
Golfzon Co., Ltd. Low Power Communication Device ver2
Golfzon >
Users Manual
Safety Instructions A1
Product Configuration B1~2
How to Operate
Full Configuration and Specifications....................................... B-1
Function Description.............................................................. B-2
How to Operate.............. ......................................................D-1
How to Install C1
How to Install........................................................................C-1
T
able of Contents
A-1
Cautions
!Do not install it under direct sunlight.
!Do not install it where the ambient temperature is too high or
low.
!Do not install it where the power is not stable.
!Do not install it where is too humid.
!Do not impact it externally.
!
!Do not assemble or repair it.
!Do not spill alcohol or benzene over it.
Care must be taken not to allow water or debris infiltrated in it.
!Prior to use, check if the adaptor and the power are correct.
S
afety Instructions
The contents in this manual are subject to change
without notice for product feature enhancement.
Note
B- 1
Item RF Reader
Name UDR-100IF
Appearance
Components
1. Terminal : 1 EA
2. Manual : 1 EA
3. Adaptor : 1 EA
Feature - RF Reader for Golfzon Member Card Recognition
Specifications
P
roduct Configuration
1. Full Configuration and Specifications
1. Full Configuration and Specifications
1) Contents
B-2
2) Parts Names
P
roduct Configuration
2. Function Description
2. Function Description
The product supplied contains followings
Manual
RF Card Sensor
IC Card Reader (Option)
1. How to Install
1. How to Install
C-1
Install it on the flat side where to be used.
Turn off the power of the external device.
Connect the communication cable to the communication port of
the external device.
(External devices : Computer, CAT or POS)
It is necessary to install the corresponding driver if connecting by
the USB port.
H
ow to Install
D- 1
H
ow to Operate
Ready Processing Done Error
Ready Processing Done Error
Ready Processing Done Error
Ready Processing Done Error
Ready Processing Done Error
Ready Processing Done Error
Ready Processing Done Error
When the power is supplied, [Ready] lamp is
lit and it is ready to receive command from
the external device.
When the reader recognizes the card,
[Progress] lamp is lit and [Ready] lamp is off.
When the read completes payment
information exchange with the card, [Done]
lamp is it.
While waiting approval, [Done] lamp is
continuously lit.
When normally approved, [Ready] lamp is lit
again.
If error, [Error] lamp is lit, and after for a
moment, [Ready] lamp is lit.
