Good Life UP1621 Guardian User Manual Guardian v4 040109 en
Good Life LLC Guardian Guardian v4 040109 en
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1542068 |
| Application ID | ozdNqjBian++XKrcq6tNzw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.47kB (818355 bits) |
| Date Submitted | 2011-09-15 00:00:00 |
| Date Available | 2011-09-15 00:00:00 |
| Creation Date | 2009-04-29 17:19:57 |
| Producing Software | GPL Ghostscript 8.15 |
| Document Lastmod | 2011-07-29 21:07:46 |
| Document Title | Microsoft Word - Guardian-v4-040109-en.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | sean |
The Guardian™ Instruction Manual www.pestrepellerultimate.com Good Life® is proud to introduce the world’s first indoor and outdoor 12-in-1 pest repeller, The Guardian™. Carefully designed with a tremendous amount of research, the Guardian includes more features than any other pest repeller on the market. Whether you use it to repel pests or as a personal safety device you can enjoy the multiple power options, convenient remote control, strobe light, motion sensor, Select a Pest™ Technology, and much more! In This Package 1 Guardian™ 1 Plastic Rain Jacket 1 Keychain Remote 1 AC Adapter 1 Instruction Manual Part List A – Strobe Light B – Motion Sensor C – Speaker D – Back Cover E – Mounting Holes F – Rain Jacket G – Remote Control H – AC Adapter I – Strobe Setting J – Sound Setting K – Sensor Sensitivity L – Volume Dial M – Frequency Dial N – Power Switch O – Battery Plug-in P – AC Plug-in Q – Battery Compartment (D Battery x 4) I - Getting Started 1. Remove the Back Cover (D). Make sure the Power Switch (N) is set to “Off”. 2. Adjust the Strobe Setting (I) to the option of your choice: “Sensor”, “Constant“ or “Off”. See Section III - “Adjusting the Strobe Settings” for more details. 3. Adjust the Sound Setting (J) to the option of your choice: “Ultra Sensor”, “Ultra Constant”, or “Alarm Sensor”. See Section IV “Adjusting the Sound Settings” for more details. 4. Adjust the sensitivity of the Motion Sensor (B) by turning the Sensor Sensitivity Dial (K) to your preferred sensitivity level. See Section V - “Adjusting the Motion Sensor” for more details. 5. Set the Volume Dial (K) to your preferred volume level. See Section VI - “Adjusting the Volume Dial” for more details. 6. Set the Frequency Dial (M) to the pest you want to repel. See Section VII - “Adjusting the Frequency Settings” for more details. 7. Select your power source. You may insert 4 D-size batteries into the Battery Compartment (Q) or use electrical power by inserting the AC Adapter (H) into the AC Adapter Plug-in (P). 8. Power the unit on by setting the Power Switch (N) to “ON”. Reattach the Back Cover (D) to the back of the unit. 9. Install the Guardian inside or outside in your preferred location. You may hang it using the Mounting Holes (E) or place it on any flat surface. See Section VIII - Installation” for more details. Enjoy your new Guardian! II – Quick Settings for Common Pests Below you will find the recommended Strobe, Sound, Frequency, and Installation settings for several common pests and uses. If you do not see your pest listed below or would like more detailed information please read Sections III – VIII in this manual. Bats in Attic Strobe: Constant Sound: Ultra Constant Frequency Dial: 6-8 To Install: Place in attic or where you suspect the bats are entering the roof area. Squirrels / Raccoons in Attic Strobe: Constant or Off Sound: Ultra Constant Frequency Dial: 3-6 To Install: Place in attic or crawl space depending on location of pest. Medium Sized Pests in Yard Strobe: Constant or Off Sound: Ultra Sensor / Constant Frequency Dial: 2-8 Motion Sensor: Adjust to preference To Install: Place near ground level for small pests. For larger pests place at body level of pest To Use for Personal Safety Strobe: Sensor Sound: Alarm Sensor Volume: 40-100 Motion Sensor: Adjust to preference To Install: Place near area you want to protect such as hallways, doorways, yard areas, RVs, etc III - Adjusting the Strobe Settings I. II. Sensor: The Strobe Light (A) will activate only when triggered by the Motion Sensor (B) ■ Best used to repel large pests that will easily set off the Motion Sensor ■ If you are using batteries, this setting conserves power compared to the “Constant” setting ■ If the Strobe Light is set to “Sensor”, then the sound must be set to either “Ultra Sensor” or “Alarm Sensor” Off: The Strobe Light (A) is turned off. ■ Can be used with any sound setting. III. Constant: The Strobe Light (A) will activate continuously. ■ Best used to repel small pests (such as insects) that will not be detected by the Motion Sensor ■ If you are not sure exactly where the pests are located, this setting may be easier for you to use than the Motion Sensor. ■ If the Strobe Light is set to “Constant”, then the sound must also be set to “Ultra Constant”. IV - Adjusting the Sound Settings I. I. Ultra Sensor: The Speaker (C) will emit Ultrasonic Sound only when it is activated by the Motion Sensor (B). ■ Best used to repel large pests that will easily set off the Motion Sensor ■ If you are using batteries, this setting conserves power compared to the “Constant” setting ■ If the sound is set to “Ultra Sensor”, then the Strobe Light must also be set to “Sensor” (or “Off”). Ultra Constant: The Speaker (C) will emit Ultrasonic Sound continuously. ■ Best used to repel small pests (such as insects) that will not be detected by the Motion Sensor ■ If you are not sure exactly where the pests are located, this setting may be easier for you to use than the motion sensor. ■ We recommend using the AC Adapter (H) with this setting because the continuous sound will drain the batteries quickly. ■ If the sound is set to “Ultra Constant”, then the Strobe Light must also be set to “Constant” (or “Off”) III. Alarm Sensor: When you want to use the Guardian in “Alarm” mode, a loud and audible alarm will sound off when the Motion Sensor (B) is activated. ■ ■ ■ Best used to repel large pests that will easily set off the Motion Sensor ■ If the sound is set to “Alarm Sensor”, then the Strobe Light must also be set to “Sensor” (or “Off”). The sound will be audible to humans when the Frequency Dial (M) is set to any setting This setting can be used for personal safety to ward off intruders (human or pest) from your property. This works best when the Strobe Light is set to “Sensor” as well. V - Adjusting the Motion Sensor The Sensor Sensitivity Dial (K) controls the sensitivity of the Motion Sensor. Numbers on the dial are shown in meters. Not all Strobe and Sound settings use the Motion Sensor. To determine if your settings use the Motion Sensor, refer to the list below: Settings that use the Motion Sensor: ■ ■ Strobe Setting (I) - “Sensor” Sound Setting (J) - “Ultra Sensor” and “Alarm Sensor” Settings that do not use the Motion Sensor: ■ ■ Strobe Setting (I) - “Constant” and “Off” Sound Setting (J) - “Ultra Constant” VI - Adjusting the Volume Dial The Volume Dial allows you to adjust the volume of the audible Alarm. You may need to try the dial at several different frequency settings for optimal results. Settings 0-4 will typically be audible to humans, while settings 5-8 should be inaudible to humans. You will only need to adjust the Volume Dial if you are using the “Alarm Sensor” setting. Otherwise, you may skip this step. VII - Adjusting the Frequency Settings The Frequency Dial (M) allows you to choose the specific types of pests you want to repel using our exclusive Select a Pest™ Technology. The frequency dial only applies to the “Ultra Constant” and “Ultra Sensor” settings. If you are using the “Alarm Sensor” setting, the Frequency dial will be deactivated. ■ ■ You may need to try the dial at several different frequency settings for optimal results. Settings 0-4 will typically be audible to humans, while settings 5-8 should be inaudible to humans. The Frequency Chart (see diagram on right) can be found on the inside of the Back Cover (D) of the unit and displays the range of the Frequency Dial in more detail. ■ ■ ■ Below are common pests and their suggested alternate frequency settings: ■ Bats – Frequency Settings 5-8 Squirrels – Frequency Settings 3-8 Insects – Frequency Setting 1 will work if you do not mind hearing the high-pitched sound. If you would rather not hear the sound, use Frequency Settings 5-8. VIII - Installation The Guardian has been designed so that you can use it virtually anywhere. Choose between 2 easy installation options: 1. 2. Place the unit on any flat surface such as counter tops, window seals, ledges, shelves, patios, and more. Mount the unit using the Mounting Holes (H) on the Back Cover (D). The most common places to mount the Guardian include fences, walls, and trees. If you are installing the Guardian outside, we recommend using it with the included Rain Jacket (F). IX - Using the Guardian™ as a Personal Safety Device The Guardian™ can be used as a Personal Safety Device to ward off intruders (human or pests) from your property. We recommend using both the Strobe Light (on the “Sensor” setting) and the Alarm Sound (on the “Alarm Sensor”setting) together so that when motion is detected, the unit will activate both the Strobe Light and the Alarm. Place the Guardian™ near doors, hallways or anywhere else in your home where you would like to detect motion. X - Remote Control The Guardian™ Remote Control allows you to conveniently activate the unit from up to 75 feet away! There are two buttons on the front of the remote: Alarm and Ultra. Alarm Button – When pressed, the unit emits the Alarm Sound. This will work on the sound settings of “Ultra Sensor” and “Alarm Sensor” only. If the sound setting is “Ultra Constant”, the remote will not trigger the Alarm Sound. Ultra Button – When pressed, the unit emits the Ultrasonic Sound, no matter if the sound is set to “Ultra”, “Off”, or “Alarm”. Note: If the sound is set to “Ultra Sensor” and the unit is sounding off, the first time you push any button on the remote it will stop the “Ultra Sensor” sound . The second time you push the button, it will activate the Audible Alarm. If you want to stop the alarm sound, simply push the Ultra button again. The Guardian™ must be turned on for the remote to work XI - Rechargeable Battery Compartment (Sold Separately) The optional Rechargeable Battery Compartment replaces the standard Battery Compartment (Q) and can be used to recharge the batteries when the Guardian™ is not in use. The Rechargeable Battery Compartment holds 5 C-size rechargeable batteries (not included). When recharging batteries, make sure the DC jack from the Compartment is firmly connected into the Battery Plug-in (O). Note: Only rechargeable batteries should be used with the Rechargeable Battery Compartment. Using non-rechargeable batteries may damage the unit and will void your warranty. XII - Specifications Dimensions Sound (Alarm & Ultrasonic) Motion Sensor Distance Activation Time Strobe Light Remote Control Battery (remote control) Battery (Guardian) AC Adapter 5” W x 7 ¼” H x 3 ½” D 5000 sq ft sound distance, 120dB (adjustable) Max, ±/-5dB 5 feet to 100 feet Triggers for a duration of 7-9 seconds 1 flash per second, 10 seconds total Activates from up to 75 feet (direct line of site required) 12V / L1028 x 1 (included) 1.5V / D Size x 4 (not included) AC 120V, 9V/600mA x 1 Return Policy All Good Life products (except those marked as "All Sales Final") are backed by a 30 Day Money Back Guarantee and 1 Year Manufacturer's Warranty. To return a product, you must first call our Customer Care Center to receive a Return Merchandise Authorization (RMA) number. Returns and Exchanges sent without an RMA number clearly displayed on the outside of the package will be returned to sender. Your 30 Day Guarantee and 1 Year Warranty start the day you receive your order. Returns must be postmarked by no later than the 30th day to be eligible for a refund. We do not refund initial shipping costs or return shipping costs. Refused packages will be charged a $10 fee. Before calling visit www.goodlifecompany.com/returns for details. Contact Us Toll Free: (800) 657-8214 Outside US: (541) 245-4488 Website: www.pestrepellerultimate.com Email: customerservice@goodlifellc.com © 2006 – 2009 Good Life®, LLC. Disclaimer: The Guardian™ is not a professional home security device although it can alert you to the presence of an intruder. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:b1a189b5-3964-4817-a6f7-87c5758da2a9 Producer : GPL Ghostscript 8.15 Create Date : 2009:04:29 17:19:57Z Modify Date : 2011:07:29 21:07:46+08:00 Metadata Date : 2011:07:29 21:07:46+08:00 Creator Tool : PScript5.dll Version 5.2.2 Document ID : uuid:54fc9d2e-1352-4c71-9626-e91458ff2846 Format : application/pdf Title : Microsoft Word - Guardian-v4-040109-en.doc Creator : sean Author : seanEXIF Metadata provided by EXIF.tools