Good Way Technology WA2200 Wireless Audio Box User Manual

Good Way Technology Co., Ltd. Wireless Audio Box Users Manual

Users Manual

WIRELESS AUDIO BOX User’s Manual
ABOUT THIS MANUAL This manual is designed for use with the Wireless Audio Adapter. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. SAFETY INSTRUCTIONS Always read the safety instructions carefully: Keep this User’s Manual for future reference Keep this equipment away from humidity If any of the following situation arises, get the equipment checked by a service technician: • The equipment has been exposed to moisture. • The equipment has been dropped and damaged. • The equipment has obvious sign of breakage. •The equipment has not been working well or you cannot get it to work according to the User’s Manual. COPYRIGHT This document contains proprietary information protected by copyright. All right are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. i
Table of Contents Table of Contents 1. Introduction....................................................................................................................1 Features .........................................................................................................................2 Package Contents ..........................................................................................................2 System Requirements ....................................................................................................2 2. Using the Adapter..........................................................................................................3 Hardware Connection.....................................................................................................3 How to Use Your Wireless Audio Adapter.......................................................................4 3. Specifications.................................................................................................................5 4. Regulatory Compliance.................................................................................................6 FCC Conditions ..............................................................................................................6 CE ..................................................................................................................................6 WEEE Information..........................................................................................................6 ii
1. Introduction 1. Introduction This Wireless Audio Adapter enables you wirelessly transmit music form your PC or Notebook site to the other listening room. Without messy wires, just simply connecting wireless audio dongle to your PC or Notebook for transmitting audio, and connecting the wireless audio box to your stereo’s speaker, you will enjoy the good quality of the sounds – offered by your stereo. You can also use the mobile strap to hang up the wireless audio box and take with as a MP3 player for private listening enjoyment though earphone. You are more flexible then ever before, since you don’t need to worry about the distance limitation by wired-cable. This Wireless Audio Adapter adopt the RF 2.4G wireless solutions and bundled with USB interface transmitter dongle and receiver box. The transmitter distance up to 45 meters and with Windows® 2000, XP and Vista™ and Mac OS X v10.x or later operation system support. 1
Features No more wires, and less cable clutter Proprietary 2.4GHz Wireless solution Easy system expansion with stereo sound support Plug and play, quick and convenient use, no driver / software installation. Low power consumption / Low audio noise Support 1-n Broadcasting Volume controlled through your computer or manually on the adapter Package Contents Wireless Audio Dongle x1 Wireless Audio Box x1 User’s Manual x1 AAA Battery x1 Mobile Strap x1 Power Adapter (Optional) x1 System Requirements The minimum requirements for the PC are: Intel Pentium III or AMD K6 500 CPU above At least 128MB RAM At least 50 MB hard disk space PC or Mac with one USB port ：• • With one of the following operating systems Windows® 2000, XP and Vista™, Mac OS X v10.x or higher 2
2. Using the Adapter 2. Using the Adapter Hardware Connection 3
How to Use Your Wireless Audio Adapter Caution: DO NOT powered on the wireless audio box alone with battery insert and power adapter connected at the same time to avoid uncessery dangerous. No external driver installed under OS support of Win 2000, XP and Mac. Please follow the steps as below and complete the association process between Wireless Audio Dongle and Wireless Audio Box. 1. Plug the Wireless Audio Dongle into the USB port of PC or Mac, and you may find the LED start blinking for powered on indicator. 2. Powered on the Wireless Audio Box with battery insert or power adapter connected first, and then press the Wireless Audio Box PWR button over 3 seconds until the Wireless Audio Box LED start blinking for powered on indicator. 3. Press the Wireless Audio Dongle pairing bottom over 3 seconds first and then press the Wireless Audio Box Volume bottom over 3 seconds until you heard the beep sound form Wireless Audio Box to indictor the association successfully. 4. Now the association has been successfully, and you may start to use your audio adapter wirelessly. Note： The Wireless Audio Box will be automatically entry the power saving mode when no audio single receive after five minutes about, please re-push the PWR button for power on and keep use the Wireless Audio Adapter. 4
3. Specifications 3. Specifications Item Description Tx USB RF Dongle USB Type A Male Rx Audio Output 3.5mm Stereo Audio Jack Female Interface Rx Power DC Power Jack RF Band 2.4 GHz RF data rate Up to 2 Mbps , GFSK modulation Audio Output 2 channel Audio Out Sample rate 48KHz with 16-bit downstream USB 1.1 full speed specification as transfer rate to 1.5 / 12 Mbps Audio Compliance Supports LPCM and Compressed format 16-bit 2-channels Tx Power Mode Bus-powered Input：AC 100-240V ; Output : DC 5V /1A Rx Power Supply AAA 1.5V battery x 1 Power consumption Rx less than 50mA @ 2.5V LED Blinking when powered on , lights up when data transfer between Tx and Rx Operational Range Up to 45 meters Operation System Support Windows® 2000, XP and Vista™, Mac OS X v10.x or higher Operating Temperature 10~40 degrees (Celsius) Storage Temperature 0~70 degrees (Celsius) Working Environment Humidity 0 ~ 80% Wireless Audio Dongle 52 (L) x 19 (W) x 10 (H) (mm) Dimension Wireless Audio Box 58 (L)x 55 (W) x14 (H) (mm) * Specifications are subject to change without notice. 5
Wireless Audio Adapter User’s Manual 4. Regulatory Compliance FCC Conditions CE This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B WEEE Information For EU (European Union) member users: According to the WEEE (Waste electrical and electronic equipment) Directive, do not dispose of this product as household waste or commercial waste. Waste electrical and electronic equipment should be appropriately collected and recycled as required by practices established for your country. For information on recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product. 6 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCCrules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void yourauthority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device maynot cause harmful interference and (2) this device must accept any interference received, including interference that may causeundesired operationFCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu