Good Way Technology WA2300 Wireless Audio Box User Manual UserMan for Box

Good Way Technology Co., Ltd. Wireless Audio Box UserMan for Box

UserMan(for Box)

Wireless Audio / Mic Adapter User’s Manual
Wireless Audio/ Mic Adapter User’s Manual ABOUT THIS MANUAL This manual is designed for use with the Wireless Audio / Mic Adapter. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. SAFETY INSTRUCTIONS Always read the safety instructions carefully: Keep this User’s Manual for future reference Keep this equipment away from humidity If any of the following situation arises, get the equipment checked by a service technician:  The equipment has been exposed to moisture.  The equipment has been dropped and damaged.  The equipment has obvious sign of breakage.  The equipment has not been working well or you cannot get it to work according to the User’s Manual. COPYRIGHT This document contains proprietary information protected by copyright. All right are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. i
Table of Contents ii Table of Contents 1. Introduction....................................................................................................................1 Features .........................................................................................................................2 Package Contents ..........................................................................................................2 System Requirements ....................................................................................................2 2. Using the Adapter..........................................................................................................3 Hardware Connection.....................................................................................................3 How to Use Your Wireless Audio / Mic Adapter ..............................................................4 3. Specifications.................................................................................................................5 4. Regulatory Compliance.................................................................................................6 FCC Conditions ..............................................................................................................6 CE ..................................................................................................................................6 WEEE Information..........................................................................................................6
Introduction 1. Introduction This Wireless Audio / Mic Adapter enables you to not only transmit audio from your PC or Notebook one side to the other side wirelessly but also transmit your voice back from the other side to PC or Notebook side in the same room. Without messy wires, just connect USB audio dongle to your PC or Notebook and connect wireless audio box to your stereo’s speaker or microphone speak, you will enjoy the good quality of the sounds. You can also use the mobile strap to hang up the wireless audio box. The audio box can be taken as a MP3 player for personal enjoyment or as a VoIP soft-phone application. It’s a more flexible for users since they don’t need to worry about the distance limitation. This Wireless Audio / Mic Adapter adopt the RF 2.4G wireless solutions and bundled with USB transmitter dongle and receiver box. The transmitter distance can be extended up to 10 meters. It is also compatible with Windows®2000, XP SP2, Vista™ 32/64-bit, Windows® 7 and Mac OS X v10.x or later operation system. 1
Wireless Audio / Mic Adapter User’s Manual Features No more wires, and less cable clutter Proprietary 2.4GHz Wireless solution Easy system expansion with stereo sound support Hands-free communication. Plug and play, quick and convenient use, no driver / software installation. Low power consumption / Low audio noise Support 1-1 Broadcasting Volume controlled through your computer or manually on the adapter Package Contents Wireless Audio Dongle x1 Wireless Audio Box x1 User’s Manual x1 AAA Battery x1 Mobile Strap x1 Power Adapter (Optional) x1 System Requirements The minimum requirements for the PC are: Intel Pentium III or AMD K6 500 CPU above At least 128MB RAM At least 50 MB hard disk space PC or Mac with one USB port With one of the following operating systems：  Windows 2000, XP , Vista and Windows 7,  Mac OS X v10.x or later 2
2. Using the Adapter 2. Using the Adapter Hardware Connection 3
Wireless Audio / Mic Adapter User’s Manual How to Use Your Wireless Audio / Mic Adapter Caution: DO NOT powered on the wireless audio box alone with battery insert and power adapter connected at the same time to avoid uncessery dangerous. No external driver installed under OS support of Win 2000, XP, Vista, Win 7and Mac. Please follow the steps as below and complete the association process between Wireless Audio Dongle and Wireless Audio Box. 1. Plug the Wireless Audio Dongle into the USB port of PC or Mac, and you may find the LED start blinking for powered on indicator. 2. Powered on the Wireless Audio Box with battery insert or power adapter connected first, and then press the Wireless Audio Box PWR button over 3 seconds until the Wireless Audio Box LED start blinking for powered on indicator. 3. Please plug headphone or speaker into audio output before pairing. Press the Wireless Audio Dongle pairing bottom over 3 seconds first and then press the Wireless Audio Box Volume bottom over 3 seconds until you heard the beep sound form headphone or speaker to indictor the association successfully. 4. Now the association has been successfully, and you may start to use your Wireless Audio/ Mic Adapter. Note： The Wireless Audio Box will be automatically entry the power saving mode when no audio single receive after five minutes about, please re-push the PWR button for power on and keep use the Wireless Audio / Mic Adapter. 4
3. Specifications 3. Specifications Item Description USB RF Dongle USB Type A Male Audio Output 3.5mm Stereo Audio Jack Female Audio Input 3.5mm Stereo Audio Jack Female Interface Power DC Power Jack RF Band 2.4 GHz RF data rate Up to 2 Mbps , GFSK modulation Audio Output 2 channel Line Out Microphone Input 1 channel Line In Audio Sample rate 32KHz with 16-bit downstream; 16KHz with 16-bit upstream USB 1.1 full speed specification as transfer rate to 1.5 / 12 Mbps Audio Compliance Supports LPCM and Compressed format 16-bit 2-channels Wireless Audio Dongle Bus-powered Power Adapter Input：AC 100-240V ; Output : DC 5V /1A Power Mode Wireless Audio Box Battery AAA 1.5V battery x 1 Wireless Audio Dongle 40mA Power Adapter 0.225 W Power consumption Wireless Audio Box Battery 0.15 W Green LED Blinking when powered on, lights up when data transfer between wireless audio dongle and wireless audio box. LED Orange LED Lights up when Mic function is been used. Operational Range Up to 10 meters Windows 2000, XP SP2 , Vista 32/64-bit and Windows 7 Operation System Support Mac OS X v10.x or later Operating Temperature 10~40 degrees (Celsius) Storage Temperature 0~70 degrees (Celsius) Working Environment Humidity 0~80% Wireless Audio Dongle 65 (L) x 20 (W) x 10 (H) (mm) Dimension Wireless Audio Box 58 (L) x 55 (W) x 14.4 (H) (mm) Housing Plastic ABS * Specifications are subject to change without notice. 5
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance." 6
7

Navigation menu