Gospell Smarthome Electronic 5703-5821 HD WiFi Camera User Manual 15 Y5703HCA UserMan
Shenzhen Gospell Smarthome Electronic Co., Ltd. HD WiFi Camera 15 Y5703HCA UserMan
15_Y5703HCA UserMan
1
HD WiFi Camera
Model: T5703HCA
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
-01- -02-
Quick Start Guide
-03-
Package List
USB cable Power adapter
Quick Guide
Screws
The picture is only for reference and the real object shall prevail.
RESET(Press
'RESET'button )
DC5V power socket
Appearance
Pilot lamp
Light sensor
Camera Lens
Camera
HD Wi Fi Came ra
Model: T5703H AA
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
Quic k Start G uide
2
1. Find the power interface behind the product and power on the
camera,The indicator will turn on.
2. Please make sure the camera and smart phone are connecting to
the same 2.4GHz band WiFi.
Connect to the power supply
5
Indicates that power failure or network not
connected.
Red indicator
remains
Red indicator
flashes
Indicates that camera is connecting to
network.
Green
indicator
flashes
Indicates the router connected
successfully (no Internet).
Green
indicator
remains
Indicates the camera is connected to
server and working well.
Camera Indicator Instruction
-05-
6
Micro TF card slot
3 Technical Parameters
※All parameters change without prior notice. The finial right of
interpretation is reserved by the company.
Resolution
Video Format
Wireless Transmission
Night Vision
Remote Intercom
Power Input
Alerts
APP
Waterproof Standard
Working Temperature
1920*1080P
H.264
802.11b/g/n 2.4GHz Wifi
Infrared
Two-way audio
5V 1A
Motion detection
Android 4.44 and above,
IOS 9.0 and above
For indoor USE only
-10C°- +50C°
Storage Built-in Micro TF card slot, Max
support 32GB
正面
背面
-04-
Preparation for Installation
Installation
4
AndroidAndroid IOSAndroid
1. 2.4G wireless router is required；
2. Support Android 4.44 and above, iOS 9.0 and above；
3.Download APP: Please select one of below two methods to download
the APP, then complete the installation and account registration，
A：Scan the QR code to download APP
AndroidAndroidAndroid
4. Add a device: Open the APP home page.click the “Add Device”
icon to connect your camera. According to the settings guide in the APP,
you can configure multiple cameras at the same time.
B：Search the APP name “GOSCOM” on the Google play or App Store
Remark: The APP interface may be upgraded and adjusted at any
time, subject to app as its actual basis without prior notice
-06-
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
FCC Certification lnfo
-07-
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice.
EU Environmental Protection
Made in China
RF exposure warning :
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment shall be
installed and operated with minimum distance 20cm between the
radiator & body.
This device is acting as slave and operating in the 2.4 GHz (2412
~2462 MHZ) band.
Ad Hoc function is supported but not able to operate on non-US
frequencies.
Do not use the device with the environment which below
minimum -30 ℃ or maximum over 50℃ .
Hereby, we declares that this device is in compliance with the
essential requirements and other relevant provisions of
Directive 2014/53/EU.
Notice: Observe the national local regulations in the location
where the device is to be used. This device may be restricted for
use in some or all member states of the European Union (EU).