Gospell Smarthome Electronic 5703-5821 HD WiFi Camera User Manual 15 Y5703HCA UserMan

Shenzhen Gospell Smarthome Electronic Co., Ltd. HD WiFi Camera 15 Y5703HCA UserMan

15_Y5703HCA UserMan

Download: Gospell Smarthome Electronic 5703-5821 HD WiFi Camera User Manual 15 Y5703HCA UserMan
Mirror Download [FCC.gov]Gospell Smarthome Electronic 5703-5821 HD WiFi Camera User Manual 15 Y5703HCA UserMan
Document ID4209255
Application ID95QkMGtCIME4RNYe2k9pZQ==
Document Description15_Y5703HCA UserMan
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize65.54kB (819226 bits)
Date Submitted2019-03-21 00:00:00
Date Available2019-03-21 00:00:00
Creation Date2019-03-13 11:57:17
Producing SoftwareCorel PDF Engine Version 17.1.0.572
Document Lastmod2019-03-20 20:55:03
Document TitleT5703HCA英文说明书-181116.cdr
Document CreatorCorelDRAW X7
Document Author: zzpalj

HD WiFi Camera
Package List
Appearance
Light sensor
Camera Lens
Pilot lamp
正面
RESET(Press
'RESET'button )
Technical Parameters
Resolution
1920*1080P
Video Format
H.264
Wireless Transmission
802.11b/g/n 2.4GHz Wifi
Night Vision
Infrared
Remote Intercom
Two-way audio
Power Input
5V 1A
Alerts
Motion detection
Storage
Built-in Micro TF card slot, Max
support 32GB
APP
Android 4.44 and above,
IOS 9.0 and above
Waterproof Standard
For indoor USE only
Working Temperature
-10C°- +50C°
※All parameters change without prior notice. The finial right of
interpretation is reserved by the company.
Micro TF card slot
Camera
HD WiFi Camera
DC5V power socket
Quick Start Guide
Quick Start Guide
Model: T5703H AA
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
Model: T5703HCA
USB cable
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
Power adapter
Screws
Quick Guide
The picture is only for reference and the real object shall prevail.
-01-
Installation
Preparation for Installation
1. 2.4G wireless router is required;
2. Support Android 4.44 and above, iOS 9.0 and above;
Connect to the power supply
1. Find the power interface behind the product and power on the
camera,The indicator will turn on.
2. Please make sure the camera and smart phone are connecting to
the same 2.4GHz band WiFi.
3.Download APP: Please select one of below two methods to download
the APP, then complete the installation and account registration,
A:Scan the QR code to download APP
背面
Android
IOS
B:Search the APP name “GOSCOM” on the Google play or App Store
Remark: The APP interface may be upgraded and adjusted at any
time, subject to app as its actual basis without prior notice
4. Add a device: Open the APP home page.click the “Add Device”
icon to connect your camera. According to the settings guide in the APP,
you can configure multiple cameras at the same time.
-04-
Camera Indicator Instruction
Red indicator
remains
Red indicator
flashes
Green
indicator
flashes
Green
indicator
remains
Indicates that power failure or network not
connected.
Indicates that camera is connecting to
network.
Indicates the router connected
successfully (no Internet).
Indicates the camera is connected to
server and working well.
-05-
-02-
FCC Certification lnfo
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
-06-
-03-
RF exposure warning :
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment shall be
installed and operated with minimum distance 20cm between the
radiator & body.
This device is acting as slave and operating in the 2.4 GHz (2412
~2462 MHZ) band.
Ad Hoc function is supported but not able to operate on non-US
frequencies.
Do not use the device with the environment which below
minimum -30 ℃ or maximum over 50℃ .
Hereby, we declares that this device is in compliance with the
essential requirements and other relevant provisions of
Directive 2014/53/EU.
Notice: Observe the national local regulations in the location
where the device is to be used. This device may be restricted for
use in some or all member states of the European Union (EU).
EU Environmental Protection
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice.
Made in China
-07-

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : zzpalj
Create Date                     : 2019:03:13 11:57:17+08:00
Modify Date                     : 2019:03:20 20:55:03+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : zzpalj
Title                           : T5703HCA英文说明书-181116.cdr
Creator Tool                    : CorelDRAW X7
Metadata Date                   : 2019:03:20 20:55:03+08:00
Producer                        : Corel PDF Engine Version 17.1.0.572
Document ID                     : uuid:b982d884-dcdf-41bd-84e3-27fb8a2be682
Instance ID                     : uuid:b0370842-48d2-401e-9fc0-359f8ade6b63
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TW55703-5821

Navigation menu