Gospell Smarthome Electronic GD8107 Digital Wireless Camera User Manual 8104JM 8105JM 8107JM E

Shenzhen Gospell Smarthome Electronic Co., Ltd. Digital Wireless Camera 8104JM 8105JM 8107JM E

Users Manual

ModelModel4CH Digital Wireless Security SystemVersion 1.7Please read this user manual carefully before using this product.Failure to understand operation procedures may result in injury.EU Environmental ProtectionWaste electrical products shouldnot be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer forrecycling advice.GD8107:GD8107
01 02CONTENTS①Camera x 4②x 1 7"TFT LCD Monitor ③Adapter x 1④ Adapter x 4⑤ SD Card (optional) x 1⑥ AV Output Cable x 1⑦ (optional)Bracket for Monitor x 1⑧ (optional) x 1Remote control Packing ListWelcomeThis product is a household monitoring recording device. It consists of four cameras installed at entrances/exits of the home and one DVR receiver with a 7-inch LCD monitor. The four-split screen of the receiver can display the monitoring pictures of four accessed cameras. In addition, the infrared sensing alarm function of human body is available. Thus, a household closed monitoring system is presented.* The pictures are for reference only, please refer to real subjects.For 8105JM and 8107JM, the camera has IR-cut function and image effect is better than 8104JM.GD8104/8105 GD8107* Only one camera included in the package.⑦ ⑧① ③②⑤ ⑥④ Features● 4CH digital wireless camera & DVR system;● Simple installation- no cables required;● Total digital wireless, no interferences, no privacy leak;● 7” LCD monitor with integrated video recorder; ● Support up to 32GB SD card or external mobile disk by USB2.0 (up to 1TBmobile disk);● Support 4 cameras/ 24hours /7days non-stop overwrite recording;● Multiple recording modes: manual,schedule, and motion activated;● 15m night vision range (only for 8107JM);● Video quality: 4CH VGA 10fps, 1CH VGA 30fps;● Weather proof outdoor cameras with 300m/1000ft transmission open range;● Video output function for bigger monitor.● IR-cut function. (only for 8105JM and 8107JM)!Please know that this monitor is not a PC, so some of the memorydevices may not work on this monitor.Record ● Timer Recording ● PIR RecordingPlaybackCamera ● Pairing ● Active ● PIP SettingAlarm settingSpecificationsFAQFCC Information151515161617181819212021Troubleshooting 22WelcomeFeaturesPacking ListStructureInstallationOperations ● Basic operations ● Video recording ● Playback ● Delete Video ● Video OutputSystem setting ● Date / time ● Language ● Record Mode ● Format SD/USB ● Storage for Recording ● Display Items ● TV System ● System Information ● Scan Mode Period ● Mute ● Load Default ● Brightness ● Volume● Alarm Volume● Power Saving Mode02020203040505070909101011111212121313131314141414● System Update 131415 ● Motion Detection16
Structure03 04OptionalAntenna7"TFT-LCDPower on/offOK ButtonNavigate ButtonDelete file/LCD、TV SwitchMenuRecord/stop Video Playback VideoQuarter Display ButtonDisplay ModeSpeakerBracketUSB PortSD Card SlotAV OutputPower PortLink IndicatorPower IndicatorAntennaPower InputInfrared LEDsLensBracketAntennaSocketLinkIndicatorPowerIndicatorPair ButtonMicrophoneInstallation1. Install the camera at the proper monitoring location. The camera can be installed in two modes:① Upright installation: Install the camera on a level plane.② Reverse installation: Install the camera in the celilng.2. Install the receiver at a proper location. This receiver is provided with two kinds of brackets, so it can be installed in two modes:① Positioned on a level plane ② Mounted to the wallUse screws tofix the bracketto the wall.Clamp thereceiver onthe bracketPIR infraredsensorRecord/stop VideoQuarter Display Button Display ModePower on/offNavigate ButtonMenuOK ButtonDelete file/LCD、TV SwitchPlayback Video3. Insert the SD card or connect an external storage device, such as a mobile hard disk.Note: 1. It doesn’t support hot plugging of SD card or external storage device.2. The external mobile disk/SD card should be in format of Fat32.3. Please format the SD card or external if they have mobile disk been used on other device.
Operations05 06● Basic operations1. Connect the camera to the power supply. The power Indicator on the back is turned on:3. Press the power switch on the receiver for 2s. or press the power switch on the remote control(direct the remote control toward the receiver). The power indicator is turned on and the power-on picture appears. 4. Pair the cameras and receiver respectively (at most four cameras can be connected at the same time). Pairing is completed by default before delivery. If pairing is not completed, complete pairing according to “Pairing” on page 16.2. Connect the receiver to the power supply.7. Press the button to enter cyclic mode display. Five cyclic intervals are available: 5s, 10s, 15s, 20s, and 30s and can be set under “System”.Meanings of icons on the real-time monitoring picture:Mobile hard disk insertedsuccessfullySD card inserted successfullyCamera name Signal intensityRecording statusCurrent cameraC2C3 C46. Press the button to switch between four display modes:V2011/11/05/09:30V2011/11/05/09:30C2C3C42011/11/05/09:302011/11/05/09:302011/11/05/09:30V2011/11/05/09:30C2C3C42011/11/05/09:302011/11/05/09:302011/11/05/09:30图像显示区域图像显示区域图像显示区域Four pictures One pictureOne large picture andthree small picturesOne large picture andthree small pictureV2011/11/05/09:30 2011/11/05/09:302011/11/05/09:30 2011/11/05/09:30Picture display area Picture display areaPicture display areaPicture display areaPicture display areaPicture display areaPicture display areaPicture display areaPicture display areaPicture display area5. After successful pairing, the following real-time monitoring picture appears:Time stampV2011/11/05/09:30 2011/11/05/09:302011/11/05/09:30 2011/11/05/09:30Picture display area Picture display areaPicture display areaPicture display area
07 08◆ ■ Manual Recording:1. In the real-time monitoring status, press the and buttons to select the camera for video recording as the current camera.2. Press the recording/stopping button on the device. The recording icon is displayed on the screen, indicating that recording starts.3. Press the button on the device again to stop recording.◆ ■ Timer Recording: Set the recording start/stop time through the “Timer Recording” menu. The device automatically records according to the set start/stop time. After recording, it automatically saves the video. Specific steps are as follows: 1. Press the MENU button to enter setting interface;2. Press the or button to select “Record” and press the OK button to enter;3. Press the or button to select “Timer Recording” and press the OK button to enter;4. Press the or button to select “New Schedule” and press the OK button to enter:● Video recordingPress the or button to select;Press the or button to adjust;Press the OK button to confirm and exit;Timer RecordingOK:Options MENU:QuitCameraEnd TimeDateStart TimeAll Cameras11/6/2012 Tue:00 :0000005. After setting, the device automatically records according to the set start/stop time.Remarks:1. If the video recording time is longer than 5 minutes, a video file will be automatically saved every 5 minutes.2. Multiple channels (four channels at most) recording at the same time is supported. The recorded videos of each channel are saved in an independent video folder.◆ ■ PIR Recording:If there is human motion detected by any accessed camera, recording can be triggered. The specific steps are as follows:1. Press the MENU button to enter the setting interface;2. Press the or button to select “Record”, press the OK button to enter;3. Press the or button to select “PIR Recording”, press the OK button to enter;4. Press the or button to select the camera;5. Press the or button to select “On”;6. Press the OK button to confirm and exit.* When “Off” is set, human motion detection function is turned off.* The infrared sensing distance of PIR is 5 m. If the distance exceeds5m, sensing may fail.◆ ■ Motion Detection Recording:If there is object motion detected by any accessed camera, recording can be triggered. The specific steps are as follows:1. Press the MENU button to enter the setting interface;2. Press the or button to select “Record”, press the OK button to enter;3. Press the or button to select “Motion Detection”, press the OK button to enter;4. Press the or button to select camera;5. Press the OK button to enter;6. Press the or button to select item;7. Press the or button to adjust;8. Press the OK button to confirm and exit.* When “Off” is set, object motion detection function is turned off.
09 104. Press the or button to select video;5. Press the OK button to playback:1. In the video playback mode, press the and buttons to select the video or video folder to be deleted.2. Press the button on the device to delete it.Remarks: Only the empty folder can be deleted.● Delete VideoPress the / button to gobackward/forward fast;press the OK button againto pause; press the MENUbutton to quit the play mode.In the real-time status, press the MENU button to enter the following interface:Press the or button to select “system” and then press the OK button to enter the system setting interface:SystemDate / TimeLanguageRecord ModeFormat SD/USBOK:Options MENU:QuitSystem SettingYou can connect the receiver to a larger monitor/TV to monitor video more clearly.● Video OutputPress the button to switch display between the monitor/TV and the receiver.2011/11/05/09:30C2C3C42011/11/05/09:302011/11/05/09:302011/11/05/09:30Picture display areaVPicture display areaPicture display areaPicture display areaVideo Cable1. In the real-time status, press the button to enter playback interface;2. Press the or button to select the folder;3. Press the OK button confirm and enter:● Playback/mnt/usb/rec/20121107 2/5.. (up) <DIR>C1_00-05 <DIR> C2_06-11 <DIR>C2_00-05 <DIR>C3_06-11 <DIR>C4_00-05 <DIR> 'OK':Play 'Del':Delete
11 12● Date / timePress the OK button to enter:● Record Mode1. Press the OK button to enter;2. Press the or button to select “Normal” or “Overwrite” and then press the OK buton to confirm and exit.Remarks:Normal: When the SD card or the mobile hard disk is full, the system stops recording automatically.Overwrite: When the SD card or the mobile hard disk is full, the system automatically deletes the earliest videos and reserves a sufficient storage space to guarantee this recording.● Format SD/USB1. Press the OK button to enter;2. Press the or button to select “Cancel”, “SD Card” or “USB Device”; Cancel: Cancels formatting. SD Card: Formats the SD card. USB Device: Formats the USB device.3. Press the OK button to format:Date / TimeOK:Options MENU:QuitDate/ /2011 11 05Time:23 11Press the or button to select;Press the or button to adjust;Press the OK button to confirm;Press the MENU button to exit.● Language1. Press the OK button to enter;2. Press the or button to select language and then press the OK button to confirm and exit.Format SD/USBOK:Options MENU:QuitFormatting, please wait.....4. After formatting, the system prompts “Format Successfully”, indicating that formatting succeeds.● Storage for Recording1. Press the OK button to enter;2. Press the or button to select “SD Card” or “USB Device”;3. Press the OK button to confirm and exit.Press the or and buttons to select an option, and then press the OK button to confirm.Date / TimeLanguageRecord ModeFormat SD/USBStorage for RecordingDisplay ItemsTV SystemSystem InformationScan Mode PeriodMuteLoad DefaultBrightnessVolumeAlarm VolumePower Saving ModeSets the system time and date.Sets the system language.Sets to stop recording or overwrite the earliest video record when the storage medium is full.Sets whether to format the storage medium.Selects the storage medium.Sets whether to display RSSI, SD/USB Status and Camera on the screenand the recorded video.Selects a system.Views the system information.Sets the cyclic display interval of monitoring picture on the camera.Turns on/off the speaker on the receiver.Sets whether to restore default settings.Adjusts brightness of the LCD screen.Adjusts the sound.Adjusts the alarm volume.Adjusts power saving mode.System Update Fo r software upgrade.
13 14● System Information1. Press OK button to enter and view;2. Press the MENU button to exit.● TV System1. Press the OK button to enter;2. Press the or button to select;3. Press OK button to confirm and exit.● Mute1. Press the OK button to enter;2. Press the or button to select “On” or “Off”;3. Press the OK button again to confirm and exit.● Load Default1. Press the OK button to enter;2. Press the or button to select “Cancel” or “OK”; Cancel: Cancels restoration of default settings. OK: Restores default settings.3. Press the OK button to confirm and exit.● Scan Mode Period1. Press the OK button to enter;2. Press the or button to select;3. Press OK button again to confirm and exit.● System Update1. Press the OK button to enter;2. Press the or button to select;3. Press OK button again to adjust;4. Press button to confirm and exit.● Display Items1. Press the OK button to enter;2. Press the or button to select;3. Click the OK button to confirm whether to display this item. If this item is displayed, the icon appears behind this item. RSSI: Signal intensity icon, icon : SD USB status: Whether the SD card or mobile hard disk is inserted, icons : Camera: Camera name, icons :4. After setting, press the MENU button to confirm and exit.C2C3 C4● Brightness1. Press the OK button to enter;2. Press the or button to adjust;3. Press the OK button to confirm and exit.● Volume1. Press the OK button to enter;2. Press the or button to adjust;3. Press the OK button to confirm and exit.● Alarm Volume1. Press the OK button to enter;2. Press the or button to adjust;3. Press the OK button to confirm and exit.
15 161. In the real-time status, press the MENU button to enter the following interface:2. Press the or button to select “Record”;3. Press the OK button to enter:RecordRecordOK:Options MENU:QuitTimer RecordingMotion Detection● Timer RecordingSet the recording start/stop time. The device automatically records according to the set start/stop time. After recording, it automatically saves the video record. For specific steps, see Page 07.● PIR RecordingIf there is human motion detected by any accessed camera,recording can be triggered. For specific steps, see Page 08.For specific steps, see Page 08.Playback1. In the real-time status, press the MENU button to enter the following interface:2. Press the or button to select “Camera”;3. Press the OK button to enter:CameraCameraOK:Options MENU:QuitPairingActivePIP SettingNote: When there is alarm sound, you can press the Delete button on the panel to mute it● Motion DetectionIf there is object motion detected by any accessed camera,recording can be triggered. For specific steps, see Page 08.Note: When there is alarm sound, you can press the Delete button on the panel to mute itPIR Recording ● Power Saving Mode1. Press the OK button to enter;2. Press the or button to select “Time Interval” or “Wake up on Motion”3. Press the OK button to enter;4. Press the or button to select;5. Press the OK button to confirm and exit.
17 182. Press the or button to select camera;3. Press the OK button to pair:PairingOK:Options MENU:QuitCamera-1Paired 0xe01f0008Camera-2 Paired 0xe01f0007Camera-3 Paired 0xe01f0006Camera-4 Paired 0xe01f0005Pairing.....Long press the PAIR button on TX for 2 seconds524. Within 60s, press the Pairing button on the back of the camera for 2s.5. After successful pairing, the receiver screen displays the following information:Pairing OKCongratulations!!!Remarks: If pairing fails, the system prompts “Pairing failed”. Please perform pairing again.● Active1. Press the or button to select “Active”, press the OK button to enter:ActiveOK:Options MENU:QuitCamera-1OffPairedPairedPairedCamera-2Camera-4Camera-3OnOnOn2. Press the or button to select the camera;3. Press the or button to select “On” or “Off”;4. Press the OK button to confirm and exit.Special note: When “OFF” is set, the camera does not have any action, such as monitoring picture display, recording, or automatic alarm.● PIP SettingSet the resolution and pixels for the recorded video.1. Press the or button to select “PIP Setting”, press the OK button to enter:2. Press the or button to select the camera;3. Press the OK button to enter the following interface:PIP SettingOK:Options MENU:QuitCamera-1 Low HighCamera-2 HighCamera-3 HighCamera-4 HighHighHighHigh● PairingAfter pairing, the camera is not affected by interference of other frequencies.1. Press the or button to select “Pairing”, press the OK button to enter:PairingOK:Options MENU:QuitCamera-1Paired 0xe01f0008Camera-2 Paired 0xe01f0007Camera-3 Paired 0xe01f0006Camera-4 Paired 0xe01f0005
19 20Base/PIP SettingOK:Options MENU:QuitResolution Size QualityHighLowTopHighMediumLowPress the or button to select “Resolution Size” or “Quality”;Press the or button to select “Top”, “High”, “Medium” or “Low”;Press the OK button to adjust;Press the MENU button to confirm and exit.Here, you can set whether to send an alarm automatically when any motion detected by the camera:1. In the real-time status, press the “MENU” button to enter setting interface;2. Press the or button to select “Alarm”;3. Press the OK button to enter;4. Press the or button to select “Motion Detection” or “PIR Detection”; 5. Press the OK button to enter;6. Press the or button to select “Off” or “On”;7. Press OK button to confirm and exit.Alarm SettingSpecifications* All the specifications are subject to minor change without prior notice.Video ResolutionViewing AngleVideo FormatSD CardItemsImaging SensorMonitorPower Supply656 x 48870°8104JM1/ -inch5 color CMOS.AVI5VSupports to 32GBConsumption Current (Max.) 400mADimensions( W x D H ) x Operating HumidityOperating TemperatureApprox. Weight214 (mm)x 157 x 26 492g15~85%RH-10℃~50℃USB 2.0Date OutputHard Disk Supports to 1TBLCD Screen Type 7"TFT LCDLCD Screen Resolution 800*480Video Frame Rate 30fps max.()CIF/VGAVideo ResolutionDimensions( W x D H ) x Approx. Weight131 (mm) (exclude bracket)x 63 x 58282gPower Supply 5VCameraIP54Waterproof CapacityNight Vision Distance 5m (Max.)ConsumptionCurrent (Max.) 700mAUnobstructed Effective Range 200m (Min.)8105JM50°8107JM600mA15m (Max.)164 (mm)x 81x172 (include bracket)615g● This product shall not be exposed to water either by dripping, splashing, immersing, etc., unless otherwise indicated. ● Turn off the system if it is not in use.● This product can only be completely disconnected for from its power source by unplugging the power adapter.● Do not cut the DC power cable of provided with this product to fit with another power source.WarningsIP66
21 22FCC InformationThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment.FAQ1. Why the screen doesn’t display any monitoring picture after the camera is connected?Answer: 1. Please check whether “Active” is set to “ON”. 2. Please check whether pairing succeeds.2. The recording time is set already or the motion detection recording is enabled, but the receiver does not start recording when the time comes or a motion is detected. Why?Answer: 1. Check whether the storage medium is inserted. 2. Check whether the storage medium is full.3. The system does not respond when the playback button is pressed. Why?Answer: Please check whether the current camera is in the recording status. If it is in the recording status, the system will not respond when this button is pressed.Symptoms Solutions No displayFailed to recordPoor picture quality camera offNo alarm or fault alarmConfirm the adapters of receiver and camera connect OKRe-pair the camera and receiver. See more details in the manualFailure in USB connection. Confirm the USB plug connects OKFailure in setting, see more details in the manual.Failure in SD card connection. It is suggested to use SD card with brand like Kingston SanDisk PanasonicKingmax or Transcend , , ,Failure in Mobile Hard disk connection. It is suggested to use hard disk with brand like IBM TOSHIBA or Seagate, .The format of mobile hard disk should be FAT32 instead of NTFS.interference in the surrounding environment, such as WIFI and other wireless devices.The antennas of receiver and camera install unwell.IR night version is on, which leads to the color cast.Confirm the adapter and camera connect OK.Confirm the setting of both Active and Display Items. See details in the manual.Failure in alarm PIP setting. See more details in the manual.blocked by some moving objects or barrier. interference from light,thunder,infrared or microwave etc.The stored recording image keeps unchanged, the angle of the pyroelectric sensor is wider than the camera angles, the sensor is triggered beyond the camera view angle.because Objects pass through the recording effective area too quickly in less than 2s.Fresnel shell is dirty.Troubleshooting of lens. When human body moves beyond the angle of lens and within the angle of senor, an alarm can also occur on the device. However, the display device cannot display human body's move in the picture area. 4. Why cannot see human body in the picture area, when the alarm occurs?Answer: For the product, the angle of sensor is greater than that
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu