Gospell Smarthome Electronic GD8107 Digital Wireless Camera User Manual 8104JM 8105JM 8107JM E

Download:
Mirror Download [FCC.gov]
Document ID	1890572
Application ID	4YVgNM9XNxwe6iTRKujRUA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	309.89kB (3873687 bits)
Date Submitted	2013-01-30 00:00:00
Date Available	2013-01-30 00:00:00
Creation Date	2009-01-08 09:21:43
Producing Software	Corel PDF Engine Version 14.0.0.653
Document Lastmod	0000-00-00 00:00:00
Document Title	8104JM,8105JM，8107JM-E.cdr
Document Creator	CorelDRAW
Document Author:	Administrator

4CH Digital Wireless Security System
Model : GD8107
EU Environmental Protection
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authority or retailer for
recycling advice.
Model
GD8107
Version 1.7
Please read this user manual carefully before using this product.
Failure to understand operation procedures may result in injury.
CONTENTS
Welcome
Welcome
Features
Packing List
Structure
Installation
Operations
● Basic operations
● Video recording
● Playback
● Delete Video
● Video Output
System setting
● Date / time
02
02
02
03
04
05
05
07
09
09
This product is a household monitoring recording device. It consists
of four cameras installed at entrances/exits of the home and one
DVR receiver with a 7-inch LCD monitor. The four-split screen of
the receiver can display the monitoring pictures of four accessed
cameras. In addition, the infrared sensing alarm function of human
body is available. Thus, a household closed monitoring system is
presented.
10
10
11
●
●
●
●
●
● Record Mode
11
12
● Format SD/USB
12
● Storage for Recording
12
13
13
13
13
13
14
14
● Language
● Display Items
● TV System
● System Information
● System Update
● Scan Mode Period
● Mute
● Load Default
● Brightness
● Volume
● Alarm Volume
● Power Saving Mode
Record
● Timer Recording
● Motion Detection
● PIR Recording
Playback
Camera
● Pairing
● Active
● PIP Setting
Alarm setting
Specifications
FAQ
FCC Information
Troubleshooting
For 8105JM and 8107JM, the camera has IR-cut function and
image effect is better than 8104JM.
14
14
14
15
15
15
15
16
16
16
17
18
18
19
20
21
21
22
Features
●
●
●
●
●
●
●
4CH digital wireless camera & DVR system;
Simple installation- no cables required;
Total digital wireless, no interferences, no privacy leak;
7” LCD monitor with integrated video recorder;
Support up to 32GB SD card or external mobile disk by USB2.0
(up to 1TBmobile disk);
Support 4 cameras/ 24hours /7days non-stop overwrite
recording;
Multiple recording modes: manual,schedule, and motion activated;
15m night vision range (only for 8107JM);
Video quality: 4CH VGA 10fps, 1CH VGA 30fps;
Weather proof outdoor cameras with 300m/1000ft transmission
open range;
Video output function for bigger monitor.
IR-cut function. (only for 8105JM and 8107JM)
! Please know that this monitor is not a PC, so some of the memory
devices may not work on this monitor.
Packing List
① Camera x 4
* Only one camera included in the package.
GD8104/8105
GD8107
② 7"TFT LCD Monitor x 1
③ Adapter x 1
④ Adapter x 4
①
②
③
④
⑥
⑦
⑧
⑤ SD Card (optional) x 1
⑥ AV Output Cable x 1
⑦ Bracket for Monitor (optional) x 1
⑧ Remote control (optional) x 1
⑤
* The pictures are for reference only, please refer to real subjects.
01
02
Installation
Structure
1. Install the camera at the proper monitoring location. The camera
can be installed in two modes:
Antenna
Infrared LEDs
Lens
PIR infrared
sensor
Microphone
Antenna
Socket
Link
Indicator
Pair
Button
Power
Indicator
Bracket
① Upright installation:
Install the camera
on a level plane.
Power Input
2. Install the receiver at a proper location. This receiver is provided
with two kinds of brackets, so it can be installed in two modes:
USB Port
Speaker
② Reverse installation:
Install the camera in
the celilng.
SD Card Slot
AV Output
Power
Port
Bracket
Antenna
Use screws to
fix the bracket
to the wall.
7"TFT-LCD
Link Indicator
Power Indicator
Record/stop Video
Quarter Display Button
Delete file/LCD、TV Switch
Menu
Display Mode
Playback Video
Power on/off
① Positioned on a level plane
Clamp the
receiver on
the bracket
② Mounted to the wall
3. Insert the SD card or connect an external storage device, such
as a mobile hard disk.
OK Button
Navigate Button
Optional
Power on/off
Navigate Button
OK Button
Record/stop Video
Quarter Display Button
Delete file/LCD、TV Switch
03
Playback Video
Display Mode
Menu
Note:
1. It doesn’t support hot plugging of SD card or external storage
device.
2. The external mobile disk/SD card should be in format of Fat32.
3. Please format the SD card or external mobile disk if they have
been used on other device.
04
Operations
●
5 . After successful pairing, the following real-time monitoring
picture appears:
Basic operations
1. Connect the camera to the power supply. The power Indicator
on the back is turned on:
Picture display area
2011/11/05/09:30
Picture display area
Time stamp
6. Press the
2. Connect the receiver to the power supply.
2011/11/05/09:30
Picture display area
2011/11/05/09:30
Picture display area
2011/11/05/09:30
button to switch between four display modes:
Picture display area
2011/11/05/09:30
Picture display area
2011/11/05/09:30
Picture display area
Picture display area
2011/11/05/09:30
Picture display area
2011/11/05/09:30
2011/11/05/09:30
Four pictures
One picture
C2
C2
图像显示区域
Picture display area
2011/11/05/09:30
2011/11/05/09:30
C3
Picture display area
C3
图像显示区域
Picture display area
Picture display area
3. Press the power switch
on the receiver for 2s. or press
the power switch
on the remote control(direct the remote
control toward the receiver).
The power indicator is turned on and the power-on picture
appears.
2011/11/05/09:30
2011/11/05/09:30
C4
C4
图像显示区域
Picture display area
2011/11/05/09:30
2011/11/05/09:30
2011/11/05/09:30
One large picture and
three small pictures
2011/11/05/09:30
One large picture and
three small picture
7. Press the
button to enter cyclic mode display. Five cyclic
intervals are available: 5s, 10s, 15s, 20s, and 30s and can
be set under “System”.
Meanings of icons on the real-time monitoring picture:
4. Pair the cameras and receiver respectively (at most four cameras
can be connected at the same time). Pairing is completed by
default before delivery. If pairing is not completed, complete
pairing according to “Pairing” on page 16.
05
C2
C3 C4
Mobile hard disk inserted
successfully
Current camera
SD card inserted successfully
Recording status
Camera name
Signal intensity
06
●
Video recording
◆ ■ Manual Recording:
1. In the real-time monitoring status, press the and buttons
to select the camera for video recording as the current camera.
2. Press the recording/stopping
button on the device.
The recording icon
is displayed on the screen, indicating that
recording starts.
3. Press the
button on the device again to stop recording.
◆ ■ Timer Recording:
Set the recording start/stop time through the “Timer Recording”
menu. The device automatically records according to the set
start/stop time. After recording, it automatically saves the video.
Specific steps are as follows:
1. Press the MENU button to enter setting interface;
2. Press the or button to select “Record” and press the OK
button to enter;
3. Press the or button to select “Timer Recording” and press
the OK button to enter;
4. Press the or button to select “New Schedule” and press the
OK button to enter:
Timer Recording
Camera
All Cameras
Date
11/6/2012
Tue
Start Time
00
00
End Time
00
00
OK:Options
MENU:Quit
Press the or button to select;
Press the or button to adjust;
Press the OK button to confirm and exit;
5. After setting, the device automatically records according to the
set start/stop time.
07
◆ ■ Motion Detection Recording:
If there is object motion detected by any accessed camera, recording
can be triggered. The specific steps are as follows:
1. Press the MENU button to enter the setting interface;
2. Press the or button to select “Record”, press the OK button
to enter;
3. Press the or button to select “Motion Detection”, press the
OK button to enter;
4. Press the or button to select camera;
5. Press the OK button to enter;
6. Press the or button to select item;
7. Press the or button to adjust;
8. Press the OK button to confirm and exit.
* When “Off” is set, object motion detection function is turned off.
◆ ■ PIR Recording:
If there is human motion detected by any accessed camera, recording
can be triggered. The specific steps are as follows:
1. Press the MENU button to enter the setting interface;
2. Press the or button to select “Record”, press the OK button
to enter;
3. Press the or button to select “PIR Recording”, press the OK
button to enter;
4. Press the or button to select the camera;
5. Press the or button to select “On”;
6. Press the OK button to confirm and exit.
* When “Off” is set, human motion detection function is turned off.
* The infrared sensing distance of PIR is 5 m. If the distance exceeds
5m, sensing may fail.
Remarks:
1. If the video recording time is longer than 5 minutes, a video file
will be automatically saved every 5 minutes.
2. Multiple channels (four channels at most) recording at the
same time is supported. The recorded videos of each channel
are saved in an independent video folder.
08
●
Playback
●
1. In the real-time status, press the
button to enter playback
interface;
2. Press the or button to select the folder;
3. Press the OK button confirm and enter:
/mnt/usb/rec/20121107
.. (up)
2/5

C1_00-05

C2_06-11

C2_00-05

C3_06-11

C4_00-05

'OK':Play
Video Output
You can connect the receiver to a larger monitor/TV to monitor
video more clearly.
Video Cable
Press the
button to switch display between the monitor/TV and
the receiver.
'Del':Delete
4. Press the or button to select video;
5. Press the OK button to playback:
C2
Picture display area
System Setting
In the real - time status, press the MENU button
following interface:
to enter the
2011/11/05/09:30
C3
Picture display area
Picture display area
2011/11/05/09:30
C4
Picture display area
2011/11/05/09:30
2011/11/05/09:30
Press the
button to go
backward/forward fast;
press the OK button again
to pause; press the MENU
button to quit the play mode.
●
Press the or button to select “system” and then press the OK
button to enter the system setting interface:
System
Delete Video
Date / Time
1. In the video playback mode, press the
and
buttons to select
the video or video folder to be deleted.
2. Press the
button on the device to delete it.
Remarks:
Only the empty folder can be deleted.
09
Language
Record Mode
Format SD/USB
OK:Options
MENU:Quit
10
Date / Time
Sets the system time and date.
Language
Format SD/USB
Sets the system language.
Sets to stop recording or overwrite the earliest video record when the
storage medium is full.
Sets whether to format the storage medium.
Storage for Recording
Selects the storage medium.
Display Items
Sets whether to display RSSI, SD/USB Status and Camera on the screen
and the recorded video.
Selects a system.
Record Mode
TV System
●
System Information
Views the system information.
System Update
For software upgrade.
Scan Mode Period
Sets the cyclic display interval of monitoring picture on the camera.
Mute
Turns on/off the speaker on the receiver.
Load Default
Sets whether to restore default settings.
Brightness
Adjusts brightness of the LCD screen.
Volume
Adjusts the sound.
Alarm Volume
Adjusts the alarm volume.
Power Saving Mode
Adjusts power saving mode.
Press the or and buttons to select an option, and then press
the OK button to confirm.
●
Date / time
Press the OK button to enter:
Record Mode
1. Press the OK button to enter;
2. Press the
or
button to select “Normal” or “Overwrite” and
then press the OK buton to confirm and exit.
Remarks:
Normal: When the SD card or the mobile hard disk is full, the
system stops recording automatically.
Overwrite: When the SD card or the mobile hard disk is full, the
system automatically deletes the earliest videos and
reserves a sufficient storage space to guarantee this
recording.
●
Format SD/USB
1. Press the OK button to enter;
2. Press the or button to select “Cancel”, “SD Card” or “USB Device”;
Cancel: Cancels formatting.
SD Card: Formats the SD card.
USB Device: Formats the USB device.
3. Press the OK button to format:
Date / Time
Format SD/USB
Date
2011
11
05
Formatting
, please
wait
.....
Time
23
OK:Options
11
MENU:Quit
Press the or button to select;
Press the or button to adjust;
Press the OK button to confirm;
Press the MENU button to exit.
●
Language
1. Press the OK button to enter;
2. Press the or button to select language and then press the
OK button to confirm and exit.
11
OK:Options
MENU:Quit
4. After formatting, the system prompts “Format Successfully”,
indicating that formatting succeeds.
●
Storage for Recording
1. Press the OK button to enter;
2. Press the
or
button to select “SD Card” or “USB Device”;
3. Press the OK button to confirm and exit.
12
●
Display Items
●
1. Press the OK button to enter;
2. Press the
or
button to select;
3. Click the OK button to confirm whether to display this item.
If this item is displayed, the
icon appears behind this item.
RSSI: Signal intensity icon, icon
SD USB status: Whether the SD card or mobile hard disk is
inserted, icons
C 2 C3 C4 :
Camera: Camera name, icons
4. After setting, press the MENU button to confirm and exit.
●
TV System
1. Press the OK button to enter;
2. Press the
or button to select;
Mute
1. Press the OK button to enter;
2. Press the
or
button to select “On” or “Off”;
3. Press the OK button again to confirm and exit.
●
Load Default
1. Press the OK button to enter;
2. Press the
or
button to select “Cancel” or “OK”;
Cancel: Cancels restoration of default settings.
OK: Restores default settings.
3. Press the OK button to confirm and exit.
3. Press OK button to confirm and exit.
●
●
System Information
1. Press OK button to enter and view;
2. Press the MENU button to exit.
●
1. Press the OK button to enter;
2. Press the
or
button to adjust;
3. Press the OK button to confirm and exit.
System Update
●
1. Press the OK button to enter;
2. Press the
or
button to select;
3. Press OK button again to adjust;
4. Press
●
Brightness
button to confirm and exit.
Scan Mode Period
1. Press the OK button to enter;
2. Press the
or
button to select;
3. Press OK button again to confirm and exit.
13
Volume
1. Press the OK button to enter;
2. Press the
or
button to adjust;
3. Press the OK button to confirm and exit.
●
Alarm Volume
1. Press the OK button to enter;
2. Press the
or
button to adjust;
3. Press the OK button to confirm and exit.
14
●
Power Saving Mode
●
1. Press the OK button to enter;
2. Press the
or button to select “Time Interval” or “Wake up
on Motion”
3. Press the OK button to enter;
4. Press the
or
button to select;
PIR Recording
If there is human motion detected by any accessed camera,
recording can be triggered. For specific steps, see Page 08.
Note: When there is alarm sound, you can press the Delete button
on the panel to mute it
5. Press the OK button to confirm and exit.
Record
1. In the real-time status, press the MENU button to enter the
following interface:
2. Press the or
button to select “Record”;
3. Press the OK button to enter:
Playback
For specific steps, see Page 08.
Record
Timer Recording
Motion Detection
PIR Recording
OK:Options
MENU:Quit
Camera
●
Timer Recording
Set the recording start/stop time. The device automatically records
according to the set start/stop time. After recording, it automatically
saves the video record. For specific steps, see Page 07.
1. In the real-time status, press the MENU button to enter the
following interface:
2. Press the
or
button to select “Camera”;
3. Press the OK button to enter:
Camera
●
Motion Detection
Pairing
Active
If there is object motion detected by any accessed camera,
recording can be triggered. For specific steps, see Page 08.
Note: When there is alarm sound, you can press the Delete button
on the panel to mute it
15
PIP Setting
OK:Options
MENU:Quit
16
●
Pairing
After pairing, the camera is not affected by interference of other
frequencies.
1. Press the or button to select “Pairing”, press the OK button
to enter:
Camera 1
Paired
0xe01f0008
Camera 2
Paired
0xe01f0007
Camera 3
Paired
0xe01f0006
Paired
0xe01f0005
OK:Options
●
Active
1. Press the
to enter:
Pairing
Camera -4
Remarks:
If pairing fails, the system prompts “Pairing failed”. Please
perform pairing again.
or
button to select “Active”, press the OK button
Active
Camera -4
MENU:Quit
Camera 1
Off
Camera 2
On
Paired
Camera 3
On
Paired
On
Paired
OK:Options
2. Press the
or
button to select camera;
3. Press the OK button to pair:
Pairing
Camera -4
Camera 1
Paired
Camera 2
Paired
Pairing
.....
0xe01f0008
0xe01f0007
Long press the PAIR button on TX for 2 seconds
Paired
0xe01f0006
52
Camera 3
Paired
OK:Options
0xe01f0005
2. Press the
or
button to select the camera;
3. Press the
or
button to select “On” or “Off”;
4. Press the OK button to confirm and exit.
Special note:
When “OFF” is set, the camera does not have any
action, such as monitoring picture display, recording, or automatic
alarm.
MENU:Quit
●
4. Within 60s, press the Pairing button on the back of the camera
for 2s.
MENU:Quit
PIP Setting
Set the resolution and pixels for the recorded video.
1. Press the
or
button to select “PIP Setting”, press the OK
button to enter:
PIP Setting
5. After successful pairing, the receiver screen displays the following
information:
Camera-1
Low
High
Camera-2
High
High
Camera-3
High
High
Camera-4
High
High
OK:Options
MENU:Quit
Pairing OK
Congratulations!!!
17
2. Press the
or
button to select the camera;
3. Press the OK button to enter the following interface:
18
Specifications
Base/PIP Setting
Resolution Size
Quality
High
Top
Low
High
Items
Viewing Angle
Low
Camera
MENU:Quit
Consumption
Current (Max.)
Waterproof Capacity
IP66
15m (Max.)
Dimensions( W x D x H )
131 x 63 x 58(mm)
(exclude bracket)
164 x 81x172(mm)
(include bracket)
282g
615g
SD Card
interface;
Press the
or
button to select “Alarm”;
Press the OK button to enter;
Press the
or
button to select “Motion Detection” or “PIR
Detection”;
Press the OK button to enter;
Press the
or
button to select “Off” or “On”;
Press OK button to confirm and exit.
Hard Disk
Video Frame Rate
Monitor
1. In the real-time status, press the “MENU” button to enter setting
600mA
5m (Max.)
LCD Screen Resolution
Here, you can set whether to send an alarm automatically when
any motion detected by the camera:
400mA
Night Vision Distance
LCD Screen Type
5.
6.
7.
50°
5V
IP54
Approx. Weight
Alarm Setting
8107JM
656 x 488
70°
Power Supply
Press the
or
button to select “Resolution Size” or “Quality”;
Press the
or
button to select “Top”, “High”, “Medium” or “Low”;
Press the OK button to adjust;
Press the MENU button to confirm and exit.
2.
3.
4.
8105JM
1/5-inch color CMOS
Video Resolution
Medium
OK:Options
8104JM
Imaging Sensor
Video Resolution
7"TFT LCD
800*480
Supports to 32GB
Supports to 1TB
30fps (max.)
CIF/VGA
Video Format
.AVI
Date Output
USB 2.0
Power Supply
Consumption
Current (Max.)
Dimensions( W x D x H )
Approx. Weight
Unobstructed
Effective Range
Operating Temperature
Operating Humidity
5V
700mA
214 x 157 x 26 (mm)
492g
200m (Min.)
-10℃~50℃
15~85%RH
* All the specifications are subject to minor change without prior notice.
Warnings
● This product shall not be exposed to water either by dripping,
splashing, immersing, etc., unless otherwise indicated.
● Turn off the system if it is not in use.
● This product can only be completely disconnected for from its
power source by unplugging the power adapter.
● Do not cut the DC power cable of provided with this product
to fit with another power source.
19
20
FAQ
1. Why the screen doesn’t display any monitoring picture after
the camera is connected?
Answer: 1. Please check whether “Active” is set to “ON”.
2. Please check whether pairing succeeds.
2. The recording time is set already or the motion detection
recording is enabled, but the receiver does not start recording
when the time comes or a motion is detected. Why?
Answer: 1. Check whether the storage medium is inserted.
2. Check whether the storage medium is full.
3. The system does not respond when the playback button
is
pressed. Why?
Answer: Please check whether the current camera is in the recording
status. If it is in the recording status, the system will not
respond when this button is pressed.
4. Why cannot see human body in the picture area, when the alarm
occurs?
Answer: For the product, the angle of sensor is greater than that
of lens. When human body moves beyond the angle of lens and
within the angle of senor, an alarm can also occur on the device.
However, the display device cannot display human body's move
in the picture area.
Troubleshooting
Symptoms
No display
Solutions
Confirm the adapters of receiver and camera connect
OK
Re-pair the camera and receiver. See more details
in the manual
Failure in USB connection. Confirm the USB plug
connects OK
Failure in setting, see more details in the manual.
Failed
to record
Failure in SD card connection. It is suggested to use SD
card with brand like Kingston,SanDisk,Panasonic,
Kingmax or Transcend
Failure in Mobile Hard disk connection. It is suggested to
use hard disk with brand like IBM, TOSHIBA or Seagate .
The format of mobile hard disk should be FAT32 instead of NTFS.
Poor
picture quality
interference in the surrounding environment, such
as WIFI and other wireless devices.
The antennas of receiver and camera install unwell.
IR night version is on, which leads to the color cast.
Confirm the adapter and camera connect OK.
camera off
Confirm the setting of both Active and Display Items.
See details in the manual.
Failure in alarm PIP setting. See more details in the
manual.
blocked by some moving objects or barrier.
interference from light,thunder,infrared or
microwave etc.
No alarm
or fault alarm
FCC Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference; and
(2) This device must accept any interference received, including
interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible
for compliance could void the user ’s authority to operate the
equipment.
21
The stored recording image keeps unchanged, because
the angle of the pyroelectric sensor is wider than
the camera angles, the sensor is triggered beyond
the camera view angle.
Objects pass through the recording effective area too
quickly in less than 2s.
Fresnel shell is dirty.
22
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 14.0.0.653
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : Administrator
Title                           : 8104JM,8105JM，8107JM-E.cdr
Creator Tool                    : CorelDRAW
Modify Date                     : 2013:01:30 16:12:54-08:00
Metadata Date                   : 2013:01:30 16:12:54-08:00
Document ID                     : uuid:e37085da-fe80-43bc-96dc-fbc5d2a7decf
Instance ID                     : uuid:29d3963f-46c6-4eb6-867a-25300544a6b0
Page Count                      : 13
Create Date                     : D:20090108092143Z
Author                          : Administrator

EXIF Metadata provided by EXIF.tools