Gospell Smarthome Electronic GD8122 Full HD Remote Home Surveillance User Manual 8122HE

Download:
Mirror Download [FCC.gov]
Document ID	3719503
Application ID	v6HVrzqWgj21i1OD6d4mtg==
Document Description	15_GD8122 UserMan r1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	359.78kB (4497249 bits)
Date Submitted	2018-01-19 00:00:00
Date Available	2018-01-19 00:00:00
Creation Date	2018-01-10 16:17:26
Producing Software	Adobe Acrobat Pro 9.3.2
Document Lastmod	2018-01-19 09:50:05
Document Title	8122HE英文.cdr
Document Creator	Adobe Acrobat Pro 9.3.2
Document Author:	zzpalj

Full HD Remote Home Surveillance
EU Environmental Protection
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authority or retailer for
recycling advice.
Model: GD8122
Version 1.0
Please read this user manual carefully before using this product. Failure to
understand operation procedures may result in injury.
CONTENTS
1. General information
1. General information
1.1 Welcome ............................................................................................. 02
1.2 Precautions ........................................................................................ 02
1.3 Packing list ........................................................................................ 02
2. Designations ...................................................................................... 03
3. Installation ........................................................................................... 04
4. Operation
4.1 Basic operation ................................................................................... 05
4.2 Record mode ...................................................................................... 07
4.3 Video playback ................................................................................... 09
4.4 Video deletion .................................................................................... 10
4.5 Video output ..................................................................................... 10
5. Main Menu Setting
5.1 System settings .................................................................................. 10
Network .............................................................................................. 11
Date/time ............................................................................................. 12
Language ............................................................................................ 12
Record mode ...................................................................................... 12
Format SD/USB ................................................................................. 12
Storage for recording .......................................................................... 12
Display items ...................................................................................... 13
System information ............................................................................. 13
System upgrade ................................................................................. 13
Scan mode period .............................................................................. 13
Mute ................................................................................................... 13
Load default ....................................................................................... 14
Brightness ........................................................................................... 14
Volume ................................................................................................ 14
Alarm volume ...................................................................................... 14
Power saving mode ........................................................................... 14
About ................................................................................................... 15
5.2 Recording settings ............................................................................. 15
5.3 Video playback ................................................................................... 16
5.4 Camera settings ................................................................................. 16
Pairing ............................................................................................... 16
Activation ............................................................................................ 18
PIP settings ......................................................................................... 18
Latency vs quality ................................................................................ 18
brightness ........................................................................................... 18
5.5 Alarm settings ...................................................................................... 19
Operations for iOS Apple Client .................................................. 21
Operations for Android Client ...................................................... 24
Specifications ..................................................................................... 28
Functional Characteristics ........................................................... 29
6.
7.
8.
9.
10. Fault Diagnosis
10.1 FAQ ................................................................................................. 30
10.2 Fault diagnosis ................................................................................ 31
10.3 Elimination of common diesel engine malfunctions ......................... 32
8122HE=GD8122+GD7122
01
1.1 Welcome
Thank you for purchasing our products. The product is a high-quality finepositioning digital monitoring product designed and developed for the
security and protection field. Please read the instruction of product
carefully before use.
1.2 Precautions
1. The receiver shall not be placed in the position where it's easy to drop or
splashed with liquid;
2. Please turn off the power switch of camera/receiver when don't use the
product for a long time;
3. The power supply can be disconnected completely only when the charger
is unplugged.
4. Do not touch the power switch and receiver with wet hands or goods to
avoid electric shock;
5. If solid or liquid enters the chassis, please disconnect the machine power
and ask qualified technicians to check before restart;
6. When the receiver is shut down, do not unplug the power supply directly.
Instead, please enable the power supply of receiver to be closed
automatically by using the shutdown button on the panel so as to avoid
damage to mobile HDD.
7. If the description of the product or parameters in the instruction is
inconsistent with the material object, please in kind prevail. We reserve
all the right for the final explanation.
1.3 Packing list
① Camera×(1-4)
② Receiver×1
③ Receiver power×1
④ Camera power×(1-4)
⑤ Remote control×1
⑥ Wall nail×4×(1-4)
⑦ Screw×4×(1-4)
⑧ SD card (optional)×1
⑨ Cable (optional)×1
⑩ HDMI line (optional)×1
①
②
③
④
⑤
(optional)
⑦
10
※ The pictures in the instruction are for reference only,
please in kind prevail.
02
2. Designations
3. Installation
1. Install the camera in a suitable monitoring position and fix it with screws.
Camera GD GD8122
Antennas
Rain cover
MIC hole
Pair key
Supply hub
PIR sensor
Photosensitive
induction
Indicator
Infrared lamp
Camera lens
Support
2. Install the receiver in a suitable horizontal position (or hang it on the wall).
Nail screw into
the appropriate
place on the wall,
and then hang the
receiver on the
screw
Receiver
10.1-inch touch screen
Antennas
Loud speaker
Hanging
hole
SD card slot
Support
Power switch
3. Insert the SD card or external storage device such as mobile HDD.
(Bottom)
USB port
Network port
Supply hub
SD card
HDMI interface
Mobile HDD
Remote control
Startup /shutdown
Navigation
OK
Record
Four-image
Playback
Display mode
Menu
Del/LCD, TV change-over switch
03
Attention
※ SD card and external storage device do not support hot plug.
※ External storage device or SD card only supports the Fat32 format.
※ If the SD card or external storage device used for this machine is used
before, please format it firstly when using.
※ Please use Class 4 SD card or above, or it cannot be identified.
※ Data in the SD card or mobile HDD cannot be restored after formatting,
please be careful.
04
4. Operation
5. After successful code matching, the real-time monitoring image will
occur as follows
(The following mainly introduces the operating method for remote control,
and operation settings can also be conducted by clicking on the touch
screen.)
Picture display area
Picture display area
2016/01/15/09:30
2016/01/15/09:30
4.1 Basic operation
Picture display area
Picture display area
Time stamp
1. Connect the camera with power supply so that the index lamp of camera
will be on.
2016/01/15/09:30
2016/01/15/09:30
6. Click at the left bottom of the touch screen with finger to pop up a
setting menu, and click a single icon to enter the setting:
2. Connect the receiver with power supply.
3. Startup: Under the shutdown state, press
on the receiver or remote
control and release it after about 2s to start up the receiver.
Shutdown: Under the startup state, press
on the receiver and release
it after 5s to shut down the receiver. Or press
on the remote control
and release it after 2s to shut down the receiver.
A: A setting menu will be popped up by a single click and packed up when
clicking again;
B: Full image display of a single camera: Sequential click will circulate
from CH1, CH2, CH3 and Ch4;
C: Circulation display: switchover is triggered between circulation
display and disenabled circulation after clicking;
D: Click to enter the four-image display; (Only display when connecting
multiple cameras)
E: Click to enter the one-large three-small image display; (Only display
when connecting multiple cameras)
F: Setting: Click to enter the main menu setting;
G: Video recording: Video recording will start by a single click and stop
when clicking again.
H: Playback: Click to enter the playback interface;
I: Volume: The volume will be circularly set from 0, 1, 2, 3, 4 and 5 by
sequential click, but it defaults to be 3.
Note: Apply a little force when swiping or clicking the touch screen with finger.
(Since the product adopts resistance screen, gentle force may have no
reaction on the touch screen, but large force may hurt your finger or damage
the screen, so please apply appropriate force.)
4. Match the codes of camera and receiver (4 cameras can be connected
simultaneously at most). The codes have been matched already as
factory default. If not, please match the codes according to the "Code
matching" description on Page 16.
05
06
7. Press
on the remote control to switch among the 3 display modes:
C2
Picture display area
Picture display area
Picture display area
2016/07/15/09:30
C3
2016/07/15/09:30
2016/07/15/09:30
Picture display area
Picture display area
Picture display area
2016/07/15/09:30
Picture display area
C4
Picture display area
Picture display area
2016/07/15/09:30
2016/07/15/09:30
2016/07/15/09:30
Four pictures
2016/07/15/09:30
1. Press MENU on remote control or click
on the touch screen to enter
the setting interface;
2. Press or to choose "Record", and then press OK to enter;
3. Press or to choose “Timer recording" and then press "OK" to enter;
4. Press or to choose "New schedule" and then press "OK" to enter
and set the starting and ending time:
2016/07/15/09:30
One large and three small
One picture
Press or to choose the
items to be set;
Press or to set;
Press OK to confirm the
setting and exit.
8. Press
on the remote control to enter the circulation mode display.
The circulation interval time includes 5, 10, 15, 20 and 30s and can be set
under the "System settings".
Meanings of icons on the real-time monitoring screen:
Full
Successful mobile HDD
insertion
Successful network switch
Successful SD card insertion
The camera is the
current camera
Prompt appears when SD card
or mobile HD does not access
Video recording state
Prompt appears when SD
card or mobile HD is full
Prompt appears when SD
card or mobile HD is locked
Signal intensity
Camera name
UPnP is not started or router
firewall is blocked
Silence
Network switch failure
1080P
1080P
Successful network switch
720P
720P
4.2 Record mode
Manual recording
1. Under the real-time monitoring state, press and on the remote control
to choose the camera recording videos as the current camera;
2. Press the recording/stop recording key
on the remote control. The
recording icon
will occur on the display screen to indicate the
recording starts;
3. Press
on remote control again to stop recording.
Timer recording
Users can set the starting and ending time of recording on the menu
"Record", the device will make recording automatically according to the
set starting and ending time, and videos will be saved automatically after
recording. Specific steps are as follows:
07
5. After setting, the device will record automatically according to the set
starting and ending time.
6. During recording, if pressing the recording/stop recording key
on the
device, the recording will stop.
Motion detection
When an object moves in the visual angle range of camera, the device
recording can be triggered. Specific steps are as follows:
1. Press MENU on remote control or click
on the touch screen to enter
the setting interface;
2. Press ◄ or ► to choose "Record", and then press OK to enter;
3. Press
or to choose "Motion detection " and then press "OK" to enter;
4. Press
or to choose the camera to be set;
5. Press ◄ or ► to choose "ON";
6. Press
or to choose the items to be changed;
7. Press
or to make adjustment;
8. Press OK to confirm the setting and exit.
"Sensitivity", "Stop condition" and "Area setting" can also be set in the
motion detection setting:
Sensitivity: "High, medium
and low" are adjustable
The time can be set in second
08
Please click the range to be set:
V : Indicating to choose the
current range
Yellow "V": Indicating to activate
regional motion detection
The space unticked represents
closed.
Area setting
4.4 Video deletion
1. Under the real-time monitoring state, press the playback key
on the
remote control or click
on the touch screen to enter the playback folder:
2. Press or on the remote control to choose the video or video folder to
be deleted;
3. Press
on the equipment to delete it.
Attention
4.3 Video playback
Folders can be deleted only when they are empty.
1. Under the real-time monitoring state, press the playback key
on the
remote control or click
on the touch screen to enter the playback
interface:
2. Press or on the remote control to choose the date folder; Press OK to
confirm it and enter;
3. Press or on the remote control to choose camera; Press OK to confirm
it and enter;
4. When SD card and mobile HDD coexist, please click the icon on the top
right corner to switch the storage device.
SD Card
6. Press ◄ or ► for REW or FF; Press or to adjust the volume; Press
OK again to pause the video; Press MENU to exit the play mode.
07/22/2016
SD
1/2
07/22/2016
C1 06-11
07/23/2016
C2 06-11
4.5 Video output
Connect the receiver to a larger display /TV to see the monitoring video
clearly.
1/1
HDMI line
5. Main Menu Setting
DELETE
DELETE
5. Press or on the remote control to choose the video to be played; Press
OK to play it;
Click this icon on
the screen to
pop up the play
menu
09
Exit
Play/Pause
REW
5.1 System settings
(The following mainly introduces the operating method for remote control,
and operation settings can also be conducted by clicking on the touch screen.)
Under the real-time monitoring state, press "MENU" on the remote control
or click
on the touch screen to enter the following interface:
Click to enter the
full-screen display,
click again to enter
the 1-big & 3-small
screen display
FF
10
Press ◄ or ► on the remote control to choose "System " and press OK to
enter the system setting interface:
System
Date/time
After choosing "Time/date" on the interface "System " and press OK to enter
the time/date setting interface;
Network
Date / Time
Date / Time
Language
Date
Record Mode
2016
Format SD/USB
11
15
Time
20
Network
Date/time
Language
Record mode
Format SD/USB
Storage for recording
Display items
System information
System upgrade
Scan mode period
Mute
Load default
Set and check the network information;
Set system time and date;
Set system language;
Set whether to stop recording or cover the earlier video
when the storage medium is full;
Format the storage medium or not;
Set the storage medium;
Whether the signal intensity, SD card state, camera names and
the like are displayed on the display screen and video recorded;
Check the system information;
System upgrade:
Set interval time displayed in cycle on the camera monitoring screen;
On or off of loudspeaker on the receiver;
Restore the default settings or not;
Brightness
Volume
Alarm volume
Power saving mode
About
Press
or
Adjust the brightness of LCD screen;
Adjust the volume;
Adjust the alarm volume;
Adjust the power-saving mode;
GPL Declaration
to choose an item, and press OK to confirm it.
Network
1. After choosing "Network" on the interface "System ", press OK to enter
and check;
2. Press MENU to exit;
Network
Network Password
Network Addressing
Push Notification
Network Information
11
Press ◄ or ► to select items to
bechanged;
Press OK to confirm the changes;
Modify network parameters;
Press OK to save and confirm;
Press MENU to exit.
11
Press or to select items to
be changed;
Press ◄or ► key to make changes;
Press OK to confirm the changes;
Press the MENU to exit the
time/date setting interface;
Language
1. After choosing "Language" on the interface "System ", press OK to enter
the language setting interface;
2. Press or to select the appropriate language, and press OK to confirm
the setting and exit.
Record mode
1. After choosing the "Record mode" on the interface "System", press OK
to enter;
2. Press or to choose "Ordinary" or "Overwriting", and then press OK to
confirm the setting and exit.
Prompt
Ordinary: When SD card or mobile HDD is full, recording will stop automatically;
Overwriting: The system will delete the most previous videos automatically when the SD
card or mobile HDD is fully occupied to clear enough storage space to ensure this
recording.
Format SD/USB
1. After choosing “ Format SD/USB " on the interface "System ", press OK to
enter;
2. Press or to choose "Cancel", "SD card" or "USB device";
Cancel: Cancel the formatting;
SD card: Format SD card;
USB device: Format mobile HDD.
3. Press OK for formatting;
4. After the formatting is completed, the hint "Format successful" will prompt.
Storage for recording
1. After choosing the "Storage for recording" on the interface "System ",
press OK to enter;
2. Press or to choose "SD card" or "USB device";
3. Press OK to confirm the setting and exit.
12
Display items
Load default
1. After choosing the "Display items" on the interface "System ", press OK
to enter;
2. Press or key to make selection;
3. Press OK to check whether the item displays. If the item is displayed, the
icon "
" behind the item will appear.
RSSI: Icon of signal intensity. Icon:
SD/USB state: Whether SD card or mobile HDD is inserted. Icon:
C2 C3 C4
Camera: Camera name. Icon:
Network: State of network connectivity. Icon: UPnP UPnP UPnP
4. Press the MENU to confirm the setting and exit.
1. After choosing the "Load default" on the interface "System ", press OK to
enter;
2. Press or to choose "Cancel" or "Confirm";
Cancel: Cancel restore defaults;
Confirm: Restore the defaults;
3. Press OK to confirm the setting and exit.
Brightness
System information
1. After choosing the "Brightness" on the interface "System ", press OK to
enter;
2. Press ◄ or ► to make adjustments;
3. Press OK to confirm the setting and exit.
1. After choosing "System information" on the interface "System ", press OK
to enter and check;
2. Press MENU to exit.
Volume
System upgrade
1. After choosing the "System upgrade" on the interface "System ", press OK
to enter;
2. Press or to choose the camera to be upgraded;
3. Press OK to make adjustments;
4. Press
to make upgrades;
5. Press OK to confirm or press the MENU to exit.
Scan mode period
1. After choosing the "Scan mode period" on the interface "System ", press
OK to enter;
2. Press or to choose time;
3. Press OK again to confirm the setting and exit.
4. Scanning can start only when shot pressing
on the remote control
and will stop after pressing again.
Mute
1. After choosing "Mute" on the interface "System ", press OK to enter and
check;
2. Press or to choose "OFF" or "ON";
3. Press OK again to confirm the setting and exit.
13
1. After choosing "Volume" on the interface "System ", press OK to enter
and check;
2. Press ◄ or ► to make adjustments;
3. Press OK to confirm the setting and exit.
Prompt
Under the real-time monitoring state and playback mode, volume can also
be adjusted by pressing or .
Alarm volume
1. After choosing the "Alarm volume" on the interface "System ", press OK
to enter;
2. Press ◄ or ► to make adjustments;
3. Press OK to confirm the setting and exit.
Power saving mode
1. After choosing the "Power saving mode" on the interface "System ",
press OK to enter;
2. Press or key to make selection;
3. Press OK to enter;
4. Press or key to make selection;
5. Press OK to confirm the setting and exit.
14
About
5.3 Video playback
1. After choosing the "About" on the interface "System ", press OK to enter;
2. Press OK to confirm the setting and exit.
See Page 9 for specific steps.
5.4 Camera settings
5.2 Recording settings
(The following mainly introduces the operating method for remote control,
and operation settings can also be conducted by clicking on the touch screen.)
1. Under the real-time monitoring state, press "MENU" on the remote control
or click
on the touch screen to enter the setting interface:
2. Press ◄ or ► to choose "Record";
3. Press OK to enter the following interface:
(The following mainly introduces the operating method for remote control,
and operation settings can also be conducted by clicking on the touch screen.)
1. Under the real-time monitoring state, press "MENU" on the remote control
or click
on the touch screen to enter the setting interface:
2. Press or to choose "Camera ";
3. Press OK to enter the following interface:
Record
Camera
Timer Recording
Pairing
Motion Detection
Activation
PIP Setting
Latency VS Quality
Timer recording
Set the beginning and ending time of video recording, and the equipment
will make video recordings in accordance with the set time. After recording,
the video will be saved automatically (see Page 8 for specific steps).
Pairing
The camera will not be interfered by other frequency points after pairing
1. Press or to select "pairing". Press OK key to enter;
Pairing
Motion detection recording
When an object moves in the visual angle range of camera, the device
recording can be triggered. See Page 8 for specific steps.
Infrared detection recording
Camera -3
Camera -4
Camera 1
Paired
0xe01f0008
Camera 2
Paired
0xe01f0007
Paired
0xe01f0006
Paired
0xe01f0005
When a human body moves in the visual angle range of camera, the device
recording and intelligent linkage alarm can be triggered. Specific steps are
as follows:
2. Press or to choose the camera to be paired;
3. Press OK to enter pairing:
Infrared detection recording
Pairing
Press of to select "ON or OFF",
press OK key to confirm:
Camera-1
ON
Camera-2
ON
Camera-3
ON
Camera 1
Paired
Camera-4
ON
Camera 2
Paired
Camera -4
Pairing
.....
0xe01f0008
0xe01f0007
Long press the PAIR button on TX for 2 seconds
Camera 3
Paired
0xe01f0006
35
15
Paired
0xe01f0005
16
4. double-color LED red light flickers.
(The camera is on power-on and startup state)
PIP settings
Set the resolution ratio and pixel of video recording.
1. Press or to choose "PIP setting" and press OK to enter;
2. Press or to choose the camera to be set;
3. Press OK to enter the following interface:
PIP settings
5. After successful pairing , the display screen on the receiver will pop up the
following prompts:
quality
Resolution size
Top High
Pairing OK
High
Congratulations!!!
Medium
Low
Prompt If pairing fails, the system prompts “Pairing failed”.
Please perform pairing again.
Activation
1. Press
or
to choose "Activation" and then press "OK" to enter;
Activation
Camera -2
Camera -3
Camera -4
Camera 1
Press or to choose "resolution ratio" or "image quality";
Press or to choose "Premium", "High", "Medium" or "Low";
Press OK to change;
Press MENU to confirm the setting and exit.
Latency vs quality
Off
On
Paired
On
Paired
1. Press or to choose "Latency vs quality” and press OK to enter;
2. Press or to choose the image quality to be set;
3. Press OK to confirm the setting and exit.
On
Paired
Latency VS Quality
Low Latency, Normal Quality
2. Press or to choose the camera to be set;
3. Press ◄ or ► to choose "ON" or "OFF";
4. Press OK to confirm the setting and exit.
Medium Latency, Better Quality
High Latency, Best Quality
Attention
In the case of "OFF", the camera will not perform any action such as the
display of monitoring screen, video recording and automatic alarm.
17
18
Brightness
1. After choosing the "Brightness" on the interface "System ", press OK to enter;
2. Press ◄ or ► to make adjustments;
3. Press MENU to confirm the setting and exit.
Connect network
1. Connect the cable to the receiver and open the receiver as shown in the
figure below:
Note: The cable connection requires Class 1 router
Brightness
Camera-1
Camera-2
Camera-3
Camera-4
5.5 Alarm settings
The item is to set whether the device will alarm automatically when someone
moves in the visual angle range of the camera.
1. Under the status of real-time monitoring, press the MENU key on the
equipment to enter the setting interface:
2. Press ◄ or ► on the remote control to choose "Alarm " and press OK to
enter;
3. Press ▲ or▼to choose "Motion detection" or "Infrared detection" and press
OK to enter;
4. Press or to choose "ON" or "OFF";
5. Press OK to confirm the setting and exit.
Prompt Prompt The alarm can make effect only when the infrared
detection or motiondetection recording functions.
2. After successful connection, enter "Main menu"=>"System settings"=>
"Network"=>"Network information". The following interface will occur on
the display screen:
Network
Golbal IP
Local IP
Port
5003
Device ID
Network ready!
Download the client program
1. Turn on the intelligent mobile device terminal and enter “App Store”,then search
and download “GoCamPro” software. as the following interface:
2. Install the software, as the following interface:
App Store
19
20
6. Operations for iOS Apple Client
3. To view the video image, you need to choose the right title in the Device list,
then click the line to enter the monitoring mode.
View image
1. Click the APP and enter “Device list” interface.
Click the
icon to add new camera.
2.When RX and mobile phone can normally connect to outer net. you just need to set
network password in the receiver, and then input to the mobile phone. Then input the
Device ID in the receiver to the Device ID in the mobile phone or scan the QR code to
get the Device ID.
Network information
4:40 PM
ipad
Devices
Global IP
Intranet IP
Port
Device ID
Scan to the client
NAME
Device name
ID
New Device
58%
Save
4. Click on the bottom
icon. APP will try to connect the RX of the previous
selected title, if connection is successful, the video image will display on the
client.
Device ID
The network is ready! Input to the client
PASSWORD
Device password
Network
Network password
Network Addressing
Set the password and enter it to the client
Push Notification
Network information
2013/11/15/16:43
Take a photo
21
22
7. Operations for Android Client
Setting Push Notification
1. Turn on the push notification function on the receiver, enter Main Menu => System
=> Network => Push Notification, the receiver screen displays the following:
Push Notification
Turn on/off
Timer recording
Minimum Push interval
Motion Detection
Connect network
1. Connect the cable to the receiver and open the receiver as shown in the
figure below:
Note: The cable connection requires Class 1 router
Record
Time Period
Registered Mobiles
Users can set according to the situation
of Minimum Push interval and time period
Notice: Only when the motion detection is
open, push notification function will be effective.
2. Click "PUSH" to Register an account. When there is a movement in front of the
camera, it will send a push message to your smart phone. As below shown:
Registered Mobiles
1234
2. After successful connection, enter "Main menu"=>"System settings"=>
"Network"=>"Network information". The following interface will occur on
the display screen:
1234
After successful registration,
the monitor will receive the
registered account name.
Network Information
Golbal IP
Local IP
Port
Remote viewing video on receiver side
When clicking
on client-side, you can check
the video data of SD card or mobile hard disk of
the receiver.
Note: The picture took by mobile client-side shall be
automatically stored in the phone.
Remarks:
1. Only when the receiver in the real-time state, to view the image.
2. If the Device ID was unable to get to the RX, indicates that RX did not normally
connect outer net, need to check your network.
3. If everything is normal, but still not in the mobile phone client to view images,
please close the client software running always in the background, please try it
again.
4. The network adapter does not support hot-swappable, Before open the RX, The
network is connected with the RX.
23
5003
Device ID
Network ready!
Download the client program
1. Turn on the intelligent mobile device terminal and enter “Google play” store,
then search and download “GoCamPro” software.
2. Install the software, as the following interface:
Google play
24
View image
3. Click the
icon, the image will display on the smart phone.
1. Click the Settings and enter device list. add new camera.
4. Press and hold the device ID to enter the setting interface.
2. When RX and mobile phone can normally connect to outer net. you just need to
input Device ID to the client. or scan the QR code to get the Device ID. the password
is set up in the receiver, and then input to the mobile phone. and saving.
Network Information
Golbal IP
Local IP
Port
5003
Device ID
Network ready!
Or scan
Input
Network
Network Password
Set
password
and input
Network Addressing
Push Notification
Network Information
25
26
8. Specifications
Setting Push Notification
1. Turn on the push notification function on the receiver, enter Main Menu => System
=> Network => Push Notification, the receiver screen displays the following:
Record
Turn on/off
Timer recording
Minimum Push interval
Motion Detection
Time Period
PIR Recording
Registered Mobiles
Users can set according to the situation
of Minimum Push interval and time period
Notice: Only when the motion detection or PIR
Recording is open, push notification function
will be effective.
Camera Resolution
Push Notification
Registered Mobiles
555
Push notification setting
Monitor
2. Click "Notification push setting" to register an account. When there is a movement
in front of the camera, it will send a push message to your smart phone. As below
shown:
Remote viewing video on receiver side
When clicking Playback on client-side, you can check
the video data of SD card or mobile hard disk of the
receiver.
Note: The picture took by mobile client-side shall be
automatically stored in the phone.
Remarks:
1. Only when the receiver in the real-time state, to view the image.
2. If the Device ID was unable to get to the RX, indicates that RX did not normally
connect outer net, need to check your network.
3. If everything is normal, but still not in the mobile phone client to view images,
please close the client software running always in the background, please try it
again.
4. The network adapter does not support hot-swappable, Before open the RX,
The network is connected with the RX.
27
Frequency response characteristic
After successful registration,
the monitor will receive the
registered account name.
Items
Image sensor
Effective pixel
Horizontal view angle
The lowest illuminance
Night Vision Distance
Waterproof Capacity
Power Supply
Operating Temperature
Operating Humidity
Dimensions(W*D*H)
Weight
Dimension of the Display Storage Format
Screen resolution
Storage Format
SD card capacity
Hard disk capacity
Video frame rate
Data output
Power supply
Operating Temperature
Operating Humidity
Dimensions(W*D*H)
Weight
Frequency range
Modulation method
Wireless transmission distance
8122HE
1/2.7",CMOS
1080P
85±5°
≤3Lux
10M
IP66
DC 12V/1A
-10℃~50℃
15~85%
69x59x130mm
238g
10.1"TFT LCD
1024(R.G.B.) X 600
AVI
At most support 128GB
At most support 3TB.
30fps (one path) / 15fps (four paths)
USB 2.0
DC 12V/2A
0℃~40℃
15~85%RH
255x37x173 (mm)
832g
2.4GHZ
16QAM
Outdoor 300 meters (Maximun)
All the specifications are subject to minor change without prior notice.
28
9. Functional Characteristics
* Support simultaneous access, recording and browsing of 4 paths wireless
HD cameras;
* Free of wiring and easy to install;
* Safe digital wireless, free of interference and able to avoid privacy disclosure;
* 10.1-inch touch display screen and integrated camera;
* Support 128GB SD card and can externally connect mobile HDD of up to 3TB;
* Various recording modes available; Manual recording, timing recording and
motion detection recording;
* Up to 20m of night visual range;
* Outdoor rainproof camera with a barrier-free transmission distance of 300m;
* With video transmission function, and external larger display screen
10. Fault Diagnosis
10.1 FAQ
1. Why the screen doesn’t display any monitoring picture after the camera is
connected?
Answer: 1. Please check whether “Active” is set to “ON”.
2. Please check whether pairing succeeds.
2. The recording time is set already or the motion detection recording is enabled,
but the receiver does not start recording when the time comes or a motion is
detected. Why?
Answer: 1. Check whether the storage medium is inserted.
2. Check whether the storage medium is full.
accessible;
* With IR-CUT function.
* Remote viewing of real-time monitoring available through iPhone/Android
device;
Please note the monitor is not a computer, so some memory devices
cannot operate on it.
29
3. The system does not respond when the playback button
is pressed. Why?
Answer: Please check whether the current camera is in the recording status.
If it is in the recording status, the system will not respond when this button is
pressed.
4. Why cannot see human body in the picture area, when the alarm occurs?
Answer: For the product, the angle of sensor is greater than that of lens.
When human body moves beyond the angle of lens and within the angle of
senor, an alarm can also occur on the device. However, the display device cannot
display human body's move in the picture area.
30
10.2 Fault Diagnosis
Problems
the LED does not
display monitoring
picture
10.3 Elimination of common diesel engine malfunctions
Solutions
Check whether "Active" is set to "ON".
Re-pair.
1.Start up UPnP potion of router
If there appears “network is normal (UPnP is not started up)” in main
menu>>system setting>>network>>network information, it is strongly
recommended to start the UPnP potion of the router to which the receiver
is connected. Whether UPnP potion of the router to which the receiver
is connected is started up? If yes, the receiver will have a better
performance, and if not, it just has an ordinary performance.
Whether the storage medium is inserted.
Whether the storage medium is full.
There is no video
If the SD card connection fails, it is suggested to use SD card with
brand like Kingston, SanDisk, Panasonic, Kingmax, etc.
Failure in Mobile Hard Disk connection. It is suggested to use Mobile
Hard Disk with brand like IBM, Toshiba or Seagate, etc.
Poor
picture quality
Whether there is interference, such as WiFi or other wireless devicees.
2.Connect receiver to the outmost router:
If there appears “Too deep RX path” in main menu>>system setting>>
network>>network information, that means too many routers are connected
in series and the router to which the receiver is connected is not the
outmost one. Please connect the receiver to the outmost router.
3.Router firewall
If there appears “UPnP is started up, but not available” in main menu>>
system setting>>Network>>network information, it is recommended to
close the router firewall.
Whether the antennas of the receiver and camera are installed.
Whether infrared night-vision light is on, which leads to the color cast?
4.The icon
on monitoring screen of the receiver (RX) refers to that the
network is not ready yet.
The receiver is in the monitoring screen and the network option is displayed
as open. The possible reasons are as follows if above icon still appears
after 30 seconds of starting up:
A.Network setup is not finished.
B.Abnormal network card.
C.Abnormal network cable.
D.Abnormal router
E.Abnormal ADSL cable
Please eliminate above abnormal reasons.
5.The icon
on monitoring screen of the receiver (RX):
UPnP option The receiver is in the monitoring screen and the network option
is displayed as open. The possible reasons for above icon are:
A.UPnP of the router to which the receiver is connected is not started up;
please start it. See the instruction manual of router for the detailed situation
and setting methods.
B.UPnP of the router to which the receiver is connected has been started up,
but its function is stopped by the fire wall. It is recommended to close the
31
32
router firewall. See the instruction manual of router for the detailed situation
and setting methods.
C.The receiver cannot use the function of UPnP and the client can connect
to the receiver (RX), but in bad performance and small client fps.
D.There are many routers whose UPnP has been started up and fire wall
has been closed, but the receiver still cannot use the function of UPnP, i.e.
the situation that “network is normal (UPnP is not started up)” or “UPnP is
started up, but not available” may appear.
The name and content of hazardous substances in the product
To meet the related regulations and requirements of Chinese Controlling and Administrative
Measures for Pollution of Electronic Information Products (The 39th Order Issued by Ministry
of Industry and Information Technology of the People's Republic of China), the toxic and
harmful substances in the products manufactured and marketed by the company are classified
by the components, proclaimed as follows:
Name and Content of the Toxic and Harmful Substances or Elements in the Products
Toxic and harmful substances or elements
6.The icon
on monitoring screen of the receiver refers to the optimal
network status.
The receiver is in the monitoring screen and the network option is displayed
as open. If the above icon appears when no client is connected to, your
network has reached the optimal status.
Component name
Pb
Machine
Hg
Cd
Cr (VI)
PBB
PBDE
×
Power components
7.The icon
on monitoring screen of the receiver refers to numbers of
client connected
The receiver is in the monitoring screen and the network option is displayed
as open. If one more client is connected, one more dot will be appeared at
the bottom of the icon. The above icon indicates three clients are connected
to the receiver.
Cables and cable sets
Accessories
Indicates that content of this toxic and harmful substance in all homogeneous
8.Wrong information of the client (cell phone or pad):
A.“Unable to resolve host 'ns.davdns.com'”, “Cannot access Internet”:
the client cannot connect to the Internet. Please check whether Wi-Fi or
3G/4G of the client has been opened and ensure the client can normally
surf the Internet.
B. “Cannot connect to server (ns.davdns.com) (1)”: the client cannot
connect to the server. Please check whether the server can normally work.
C.“Device is offline at ns.davdns.com (0006015610431129)”:
the possible situations are: the receiver is not started up; the receiver is
not connected to network; the receiver is not registered in the server;
the receiver software and client APP do not use the same server. Please
check whether the receiver can normally work; whether the network is
ready; whether the software is applied in a correct approach.
material lof this component is under limit requirement of the SJ/T11363-2006
standard.
X: Indicates that content of this toxic and harmful substance in all homogeneous
material of this component is under limit requirement of SJ/T11363-2006 standard.
All components labeled with "X" indicate they comply with the RoHS regulations of
the European Union.
Machine: It includes printed circuit board and the components, electronic
components, etc.
In accordance with the different product model, the purchased product may not
contain all the above components.
Electronic & information products sold within the People's Republic of China must
have this mark labeled; the figure in it refers to its service life under normal
conditions.
D.Connection timeout: the receiver has been registered in the server, but
the client (cell phone or pad) cannot connect to the receiver. The possible
problems are: insufficient network bandwidth, network jam, or network
is blocked by the firewall or NAT.
33
34
Federal Communication Commission (FCC) Radiation Exposure Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with
RF exposure requirements.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : zzpalj
Create Date                     : 2018:01:10 16:17:26+08:00
Modify Date                     : 2018:01:19 09:50:05+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2018:01:19 09:50:05+08:00
Creator Tool                    : Adobe Acrobat Pro 9.3.2
Format                          : application/pdf
Title                           : 8122HE英文.cdr
Creator                         : zzpalj
Document ID                     : uuid:2e3a25a1-9dfb-4b5d-a295-f2bad082b7a0
Instance ID                     : uuid:a0cbaeb1-567e-44ec-b67c-6ea0da5c4544
Producer                        : Adobe Acrobat Pro 9.3.2
Page Count                      : 19

EXIF Metadata provided by EXIF.tools