Gospell Smarthome Electronic T5886HCB HD WiFi Camera User Manual 10705012523 T5886HCB Manual 3 5
Shenzhen Gospell Smarthome Electronic Co., Ltd. HD WiFi Camera 10705012523 T5886HCB Manual 3 5
15_T5886HCB UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3672584 |
| Application ID | 14dlbK4U8er5vv8nECSMDw== |
| Document Description | 15_T5886HCB UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 159.19kB (1989837 bits) |
| Date Submitted | 2017-12-12 00:00:00 |
| Date Available | 2017-12-12 00:00:00 |
| Creation Date | 2017-12-11 13:56:40 |
| Producing Software | Adobe Acrobat Pro 9.3.2 |
| Document Lastmod | 2017-12-11 13:56:40 |
| Document Title | 10705012523 T5886HCB_Manual(3.5) .cdr |
| Document Creator | Adobe Acrobat Pro 9.3.2 |
| Document Author: | zzpalj |
80.00 mm 110.00 mm HD WiFi Camera Quick Start Guide Model: T5886HCB Before using the product, please read the guide carefully to avoid any damages to the product in virtue of faulty operation or misuse. 陈栋 2017-09-13 英文说明书 T5886HCB 电子档1 :1 80x110mm 105g铜版纸 双面四色印刷 工 艺 ： 风 琴 折，封面在 外 其 他 ：18P 1.0 新版本 变更时间 说 明： 变更前 变更后 I Appearance Installation Preparation prior to Installation HD WiFi Camera Light sensor Camera Lens Scan QR Code to Add Register/Login 1. 2.4G wireless router is required. 2. support Android 4.4 and above, iOS 8.0 and above 3. Download and install the APP: A. Open the App Store , search “GOSCOM” and install. B. Open the Google Play Store , search “GOSCOM” and install. 4. Here is an operation example of Android APP, and it can serve as a reference for the iOS APP. 5. power-on Camera and there will be prompt sound indicating power on succeed Step 1: Tap the “GOSCOM” APP icon to open it (figure 1); Step 2: Use email address for user ID registration (figure 2-3); Step 3: After registration, enter the email address and then password to log in (figure 2) 1.Click “Add Camera” (figure 4) → Click “scan the QR code to add” (figure 5) 11:50 No Service 3.Please press the “SET” key for 1 second, and then you will hear a “Beep” sound(figure 8) 10-20cm No Service No prompt sound 11:50 No Service 11:50 No Service scan the QR code to add Quick Register Add by WiFi Add by network cable Add device Get code Enter address Add friends share Experience Center please enter verification code sent to your email(case sensitive) Email 11:50 No Service (4) 11:50 Scan QR Code Add Device Enter password Password format: 8-16 characters in length, contain at least two kinds among numbers,capital letters and lowercase letters Wall Socket Login Register Forget password No Service Album 11:50 Album (5) 2.Configure WIFI, enter WiFi name and password, and Click “Confirm” after that. (figure 6)P.S:Device does not support 5G Wi-Fi network; if this is not your desired network, tap to toggle. (figure 7) 11:50 No Service WiFi setting Press and hold the SET key for 1 second and then you will hear Star t Configur tion Mode Press and hold the SET key for 1 second and then you will hear Star t Configur tion Mode 11:50 No Service WiFi setting ID： Scan WiFi setting Next (12) (13) scan the QR code to add 6.After scan the QR Code, and when you hear "Beep" twice Click “I Have Heard It” (Figure 14) , and now the camera is connecting to the router WiFi. When you see that the indicator on the device turns from blinking green to be steady on, it indicates that the device is connected and will automatically skip to the device list. (Figure 15) Click the device to enter the real-time monitoring interface. (Figure 16) 11:50 No Service 11:50 No Service I have raed this Agreement and agree to the terms and conditions User agreement Antenna 11:50 Album Device Name：Camera Enter password again Remember password No Service Album Camera does not support 5G Wi-Fi;if this is not the network you want,click to change 4.Click the QR code icon (Figure 9) , switch to the QR code scanning mode, and scan the ID QR code ●QR Code on the camera sticker (Figure 10) ; ●Or choose the QR code picture from the album for ID scanning (Figure 11) No Service Enter password Register Scan QR Code I Have Heard It 11:50 No Service 11:50 No Service Confirm (8) (3) 11:50 Add device Device List (2) 11:50 Add Device 1.Click “Add Camera” (Figure 17) → Click “Add by WIFI” ( Figure 18)→ Configure WIFI, enter WiFi name and password, and click “Confirm” after that.(Figure 19)P.S:Device does not support 5G Wi-Fi network; if this is not your desired network, Click to toggle Add device Put this QR code at 10-20cm from the camera, and when you hear a "beep" prompt sound, click “I have heard it” (1) Power Adapter No Service Add by WIFI Scan QR Code 11:50 No Service Device List Microphone Camera 11:50 No Service 11:50 No Service Scan QR Code ID： Scan Device List please confirm the SSID and password arecorrect, and SSID matches the WiFi of device Add by network cable Confirm Add device Add friends share Experience Center (17) (18) (19) 2.Please press and hold the “SET” key for 1 second, and then you will hear a “Beep” sound(Figure 20) 11:50 Living Room 2017/04/21 13:00 Device Name：Camera Camera does not support 5G Wi-Fi;if this is not the network you want,click to change No Service (21) Reset PASSWORD Add by WiFi (22) (23) 4. After you click “Confirm”, when you will hear “Beep”twice, indicates that the camera is connecting to the router.(Figure 24) When you see that the indicator on the device turns from blinking green to be steady on, it indicates that the device is connected and will automatically skip to the device list. (Figure 25) Click the device to enter the real-time monitoring interface. (Figure 26) No Service 11:50 11:50 No Service Add by WiFi No Service Device List 11:50 Living Room 2017/04/21 13:00 It will take about 1-2 minutes to WiFi network, please wait Camera does not support 5G Wi-Fi;if this is not the network you want,click to change Next Thermo sensitive induction Note: There is no sensor which the product is without the temperature control induction. 31°C 31°C (9) Reset Micro SD card slot SET key Quick Start Guide Before using the product, please read the guide carefully to avoid any damages to the product in virtue of faulty operation or misuse. View Monitoring and Operate After the device is connected, you can view real-time monitoring, and take a picture, record a video, speak, set up and make other operations on your mobile phone. No Service 11:50 No Service Living Room 2017/04/21 13:00 11:50 Living Room 2017/04/21 13:00 -2- 1. Click “Settings” icon (Figure 33) → Click “Delete Device” (Figure 34) APP will automatically switch to camera list, delete the camera you want to Unbundled it from the APP Software Upgrade 1. Click “Settings” icon (Figure 29) → Click “Device Information” (Figure 30)→ Click “System Firmware” (Figure 31)→ Click “Update Now” (Figure 32)(It can only be upgraded if there is a small red spot on the top right corner of the application firmware) 11:50 No Service No Service 11:50 11:50 No Service Living Room 11:50 No Service Living Room Camera time check Rotate video 180 degrees 31°C Sound Share with friends Snapshot Add by network cable (33) Add friends share (34) Delete device Experience Center WiFi setting (27) (28) 1. Voice button: Click to close/disclose the voice 2. Talkback button: press and hold this button to talk with the camera. 3. Capture button: click to fast capture (save in the settings directory Album Book option). 4. Playback button: Click to enter the playback page, you can view the camera SD card video file. 5. Record button: Click to start recording, click the button again (stored in the set the directory of the album option). 6. PTZ button: Click this button, APP pop-up PTZ control interface for Head level \ vertical angle to adjust (Figure 28). 7. Sharpness button: Click to adjust the Resolution pixel for real-time video monitoring (HD/SD) 8.Thermometer: Real-time temperature detection 9.Set button: Click this button to set the camera-related functions. Sound Device information Snapshot Speak (29) No Service 11:50 Delete device No Service (30) (38) Add Friends to Share Generate a QR code for sharing(can share this QR Code to multi- users) 1. Click”setting” icon(Figure 35) → Click "share with friends" (Figure 36)→ you can have the QR code(Figure 37) 11:50 11:50 No Service Living Room No Service 11:50 share with friends Setting 2017/04/21 13:00 (40) ※ No additional notice will be made in case of any minor change. Our company reserves the right of final interpretation. Camera Camera Indicator Instruction USB cable Power adapter Red indicator remains Indicates that power failure or network not connected. Red indicator flashes Indicates that camera is connecting to network. Green indicator flashes Green indicator remains Indicates the router connected successfully (no Internet). Album Status indicator Update Rotate video 180 degrees Can Update to 00.00.00.01 Night vision 1.Optimize APP network pairing procedure 2.Optimize… 3.Optimize… Update Now (39) 31°C Share with friends Another Time Steps to share with friends Camera time check Sound Snapshot WiFi setting Step 1:Open“Add Camera”on the mobile phone of a friend Device information Step 2:Select the fourth way to add,and scan QR code Indicates the camera is connected to server and working well. Speak (32) -9- (31) -10- (35) Delete device -11- (36) Screws Quick Guide The picture is only for reference and the real object shall prevail 11:50 No Service Packing List Add device Camera time check (37) -12- Add device -13- -14- Sound Snapshot Speak Did not hear any sound? Experience Center (14) (15) Function Features Step 2: Binding Step 3: Connect succeeded I have heard it (16) 3.Click the QR code icon (Figure 21) , switch to the QR code scanning mode, and scan the ID QR code ●QR Code on the camera sticker (Figure 22) ; ●Or choose the QR code picture from the album for ID scanning (Figure 23) -6- ID： Scan Add by WiFi Device information Speak Snapshot Speak Rocker scan the QR code to add WiFi setting Night vision Sound Step 1: Connecting (20) Did you hear a “beep” sound? -5- Status indicator Device List Scan the QR code for sharing with friends 31°C 5.When the APP Switch to the precaution page before scanning, please read the prompts carefully and click "Next step"(Figure 12) When the mobile phone shows a QR code interface, please align the QR code to the camera, with a distance of about 10 ~ 20cm (Figure 13); if scanning succeeds, you will hear “Beep”twice. 24/7 live video streaming HD provides excellent video quality Smart motion detection and notification Advanced video recording on micro-SD card (Maximally support the cyclic recording of 64GB micro SD card.) Motorized Pan/Tilt Night vision (5m visibility) Two-way voice transmit Quick & easy to set up Night vision Share with friends Product Specifications Rotate video 180 degrees Setting Album HD 31°C (11) (7) Status indicator 31°C HD Confirm 11:50 No Service Add Device Add device Album 11:50 please confirm the SSID and password arecorrect, and SSID matches the WiFi of device (10) -4- If other users want to add the camera, Click "Add Camera" → select "Add Friends to Share" mode(Figure 38)→ Click the QR code icon (Figure 39) , switch to the QR code scanning mode→ scan the QR code shared by friends→ Enter the Device List(Figure 40) No Service Setting 2017/04/21 13:00 11:50 No Service Living Room 2017/04/21 13:00 Confirm -3- Device Unbinding Features PASSWORD please confirm the SSID and password arecorrect, and SSID matches the WiFi of device (6) -1- Reset PASSWORD TIP: For user ID registration, please use an effective email address, (example XXXX@qq.com), in order to retrieve the password. Indicator light Power adapter port Model: T5886HCB Living Room Living Room -7- 10 Tips 1.Suggest using qualified micro-SD card to avoid incompatibility. Format micro-SD card before using. 2.Movement detection: when movement is detected within the scope of camera, the camera will record video and take photos automatically. Videos and photos will be saved in micro-SD card. 3.Share your camera to friends: Share QR code of the device with your friends. 4.The main account to delete the camera, this time friends to share Will be deleted together. (You have to re-add the camera to use it again) 5.Push message: when movement is detected, alarm message can be sent to server and pushed to your phone. 6.Remote monitoring: after the camera is connected to Internet successfully, app can view the monitor via Internet, anytime, anywhere. 7.Temperature alarm: In case that the temperature detected by the device is higher than the set value, audible alarm will be activated on cell phone (once every 2 minutes). Note: There is no function which the product is without the temperature control induction 8.Only support the special characters in English mode, such as: " @, #, &, *, ~, ｛, ｝, -, =, +, /, ?, (, )", Dont support the special characters, such as:"%", "\", "<>". 9.When this machine has a crash fault or other abnormal conditions influencing the usage, it is recommended to cut out the power and restart; or press SET key for 10 seconds, which can restore factory settings, and then please reconnect the router. -15- Troubleshooting 1. Wi-Fi cannot be connected a) Ensure that the antenna of camera is fixed well. b) Ensure that camera is in range of router. Keep the distance less than 40fts between router and indoor camera, less than 65fts for outdoor camera. c) Ensure that SSID and password of Wi-Fi contains no special characters. Modify the SSID and password of Wi-Fi with only English characters, no special characters. d) Ensure that SSID and password are no longer than 16 characters e) Ensure that SSID is broadcasted. f ) Ensure that the DHCP is enabled on router. g) Ensure that Wi-Fi encryption method is WPA2-PSK/ WPA-PSK or AES. h) Ensure that Wi-Fi signal is 2.4GHz. i ) Ensure that there is no MAC filter on router or add MAC address to router whitelist j ) We suggest rebooting the router, and the "security settings, encryption method" of WiFi password should never choose "auto-select". k ) Reset the camera to set up connection again. Press and hold SET key for 5 seconds. 2. Red indicator remains, network connection is failed. a) Ensure that the password of Wi-Fi is correct. b) Ensure that the network connects to Internet freely. c) Ensure that the camera is in range of Wi-Fi hotspot. 3. Green indicator flashes, connection to server failed. a) Ensure that Wi-Fi signal is strong enough and bandwidth is enough for connection. Move near to Wi-Fi hotspot or increase the bandwidth. b) Ensure that camera is not under interferon of other 2.4GHz signal. 11 Add device NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -16- Snapshot Experience Center (24) (25) (26) -8- This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Hereby, we declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Notice: Observe the national local regulations in the location where the device I s to be used. This device may be restricted for use in some or all member states of the European Union (EU) The operated frequency is 2.4G~2.4835G with B/G/N20/N40. The Max output power on 802.11b is 16.96dBm. The Max output power on 802.11g is 14.98dBm. The Max output power on 802.11n-20 is 15.12dBm. The Max output power on 802.11n-40 is 14.67dBm EU Environmental Provisions FCC/CE Certification Information Sound Speak connecting failde in over 2 minutes E-waste cannot be mixed with household garbage; corresponding local government sector or recycling stations shall be responsible for circular process. -17- RF_061, Issue 02 SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, [ShenZhen Gospell Smarthome Electronic Co., Ltd.] declares that the radio equipment type [T5886HCB] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:(www.goscam.com) Richie Xiao
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : zzpalj Create Date : 2017:12:11 13:56:40+08:00 Modify Date : 2017:12:11 13:56:40+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2017:12:11 13:56:40+08:00 Creator Tool : Adobe Acrobat Pro 9.3.2 Format : application/pdf Title : 10705012523 T5886HCB_Manual(3.5) .cdr Creator : zzpalj Document ID : uuid:43f79577-9656-445c-815c-571b1175f21f Instance ID : uuid:a0694a3e-b622-45b6-8767-188140e0be0b Producer : Adobe Acrobat Pro 9.3.2 Page Count : 3 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools