Gospell Smarthome Electronic T5922HAA HD Outdoor WiFi Camera User Manual 15 T5922HAA UserMan

Shenzhen Gospell Smarthome Electronic Co., Ltd. HD Outdoor WiFi Camera 15 T5922HAA UserMan

15_T5922HAA UserMan

-1-Appearance123467589101112(Front) (Back)1.Infrared Transmitter2.Camera Lens3.Light Sensor4.Link Indicator5.Power Indicator6.Infrared Sensor7.Support Frame8.Antenna9.Rain Cover10.SET Button11.DC 12V Power Plug12.Screw hole1 Outdoor WiFi CameraHD Model: T5922HAABefore using the product, please read the guide carefully to avoidany damages to the product in virtue of faulty operation or misuse.Quick Start Guide2InstallationPower Adapter Wall SocketCamera-2- -3-1. 2.4G wireless router is required. 2. Support Android 4.4 and above, iOS 8.0 and above3. Download and install the APP:A. Open the App Store , search “GOSCOM” and install. B. Open the Google Play Store , search “GOSCOM” and install.4. Here is an operation example of Android APP, and it can serve as a reference for the iOS APP. 5. Power-on camera and red link Indicator remains,power indicator remains. Preparation prior to InstallationTIP: For user ID registration, please use an effective email address, (example XXXX@qq.com), in order to retrieve the password.(2)(1)(3)Step 1: Tap the “GOSCOM” APP icon to open it (figure 1);Step 2: Use email address for user ID registration (figure 2-3);Step 3: After registration, enter the email address and then password to log in (figure 2) Register/LoginQuick RegisterEnter addre ssEnter pa ssw ordEnter pa ssw ord a gai nRegis terGet c odeplease enter verification code sent toyour email(case sensitive)Pass word fo rmat: 8 -16 cha racte rs in len gth, co ntain a t leasttwo k inds am ong num bers, capit al lett ers and l owerca selet tersI have raed th is Agreem ent and agree to th eterms an d conditi ons User agre ementNo Se rvice 11:5 0EmailEnter pa ssw ordLoginReg ist er Remem ber p ass wor dForget passwordNo Se rvice 11:5 0-4- -5-Scan QR Code to AddDevice ListAdd deviceExperience CenterNo Se rvice 11:50Add friends shareAdd by network cableAdd devicesca n the QR co de to addAdd b y WiFiNo Se rvice 11:5 0WiFi settingConfirmplease confirm the SSID and password arecorrect,and SSID matches the WiFi of deviceResetPASS WORDNo Service 11:5 0Camera does not support 5G W i-Fi; if this i s not the network you want,click to changeWiFi settingConfirmplease confirm the SSID and password arecorrect,and SSID matches the WiFi of deviceResetPASS WORDNo Service 11:5 0Camera does not support 5G W i-Fi; if this i s not the network you want,click to change1.Click “Add Camera” → “scan the QR code to add”(figure 5) (figure 4) Click 2.Configure WIFI, enter WiFi name and password, and “Confirm” after that. (figure 6)P.S:Device does not support 5G Wi-Fi network; if this is not your desired network, tap to toggle.(figure 7)click (4) (5)(6) (7)Scan QR Code AlbumNo Se rvice 11:50Add Dev iceNextDevice Name：CameraScanID：No Service 11:50Press and hold the SET key for 1 second and then you will hear Star t Configurtion ModeAlbumNo Se rvice 11:504.Click the QR code icon (Figure 9) , switch to the QR code scanning mode, and scan the ID QR code●QR Code on the camera sticker (Figure 10) ;●Or choose the QR code picture from the album for ID scanning(Figure 11) 5.When the APP switch to the precaution page before scanning, please read the prompts carefully and click "Next step"(Figure 12)When the mobile phone shows a QR code interface, please align the QR code to the camera, with a distance of about 10 ~ 20cm(Figure 13); if scanning succeeds, red link indicator turns to green.3.Please press the “SET” key for 1 second, and then red link indicator flashes,power indicator remains.(figure 8)(8)(9) (10) (11)-6- -7- -8-10-20cmI Have Heard ItPut t his QR co de at 10- 20cm fr om the cam era, an d when yo u hear a "b eep" pro mpt sou nd, cli ck “I have h eard it ”ConfirmNo pr ompt so undScan QR CodeNo Se rvice 11:5 0Scan QR CodeI have heard itDid y ou hear a “ beep” so und?Did not hear any sound?No Service 11:5 0Device ListAdd dev iceExperience CenterLiving Ro omNo Service 11:50Living Room2017/04/21 1 3:0031°CNo Service 11:5 0Spe akSound Snapshot6.After scan the QR code, and when you see the link indicator turns to green light, click “I Have Heard It”(Figure 14), and now the camera is connecting to the router WiFi. When you see that the indicator on the device turns from blinking green to be steady on, it indicates that the device is connected and will automatically skip to the device list. (Figure 15)Click the device to enter the real-time monitoring interface.(Figure 16)(12) (13)(16)(15)(14)Add by WIFIDevice ListAdd dev iceExperience CenterNo Service 11:5 0Add friends shareAdd by network cableAdd devicesca n the QR co de to addAdd b y WiFiNo Se rvice 11:5 0WiFi settingConfirmplease confirm the SSID and password arecorrect,and SSID matches the WiFi of deviceResetPASS WORDNo Service 11:5 0Camera does not support 5G W i-Fi; if this i s not the network you want,click to change1.Click “Add Camera” → “Add by WIFI” Figure 18)→ Configure WIFI, enter WiFi name and password, and click “Confirm” after that.(Figure 19)P.S:Device does not support 5G Wi-Fi network; if this is not your desired network, Click to toggle(Figure 17) Click (2.Please press and hold the “SET” key for 1 second, and then red link indicator flashes.(Figure 20) 3.Click the QR code icon (Figure 21) , switch to the QR code scanning mode, and scan the ID QR code●QR code on the camera sticker (Figure 22) ;●Or choose the QR code picture from the album for ID scanning(Figure 23) (17) (18) (19)(20)Add by Wi FiIt wi ll take a bout 1- 2 minut es to WiF i netwo rk,please waitcon necti ng fail de in ove r 2 min ute sStep 1: ConnectingStep 3: Connect succeededSte p 2: Bin dingNo Se rvice 11:5 0Device ListAdd dev iceExperience CenterLiving RoomNo Service 11:5 0Scan QR Code AlbumNo Service 11:5 0Add Dev iceNextDevice Name：CameraSca nID：No Service 11:5 0Press and hold the SET key for 1 second and then you will hear Star t Configurtion ModeAlbumNo Service 11:5 04.indicates that the camera is connecting to the router.(Figure 24) When you see that the indicator on the device turns from blinking green to be steady on, it indicates that the device is connected and will automatically skip to the device list. (Figure 25) Click the device to enter the real-time monitoring interface.(Figure 26) After you click “Confirm”, when red link indicator turns to green, (21) (22) (23)(24) (25) (26)Living Room2017 /04/21 13:0031°CNo Service 11:5 0SpeakSound Snapshot-14- Product Features24/7 live video streamingHD 720P provides excellent video qualityPush message to your phone when PIR sensor triggered.Advanced video recording on built-in 4G micro-SD cardNight vision (20m visibility)Quick & easy to set up7 Tips Packing Content Manual x1 Wall plug x4 Screw x4※Pictures are for reference only, and the real object prevails. Wrench x1 Camera x1 Antennax1 Power adapterx18 9 1.Infrared detection: when thermal radiation source is detected within the scope of camera, the camera will record video and take photos automatically. Videos and photos will be saved in built-in micro-SD card.-17--16-c) Ensure that SSID and password of Wi-Fi contains no special characters. Modify the SSID and password of Wi-Fi with only English characters, no special characters. h) Ensure that Wi-Fi signal is 2.4GHz. i ) Ensure that there is no MAC filter on router or add MAC address to router whitelist 2.Red link Indicator remains, network connection is failed. a) Ensure that the password of Wi-Fi is correct. b) Ensure that the network connects to Internet freely. c) Ensure that the camera is in range of Wi-Fi hotspot.3.Green link Indicator flashes, connection to server failed. a) Ensure that Wi-Fi signal is strong enough and bandwidth is enough for connection. Move near to Wi-Fi hotspot or increase the bandwidth. b) Ensure that camera is not under interferon of other 2.4GHz signal.g) Ensure that Wi-Fi encryption method is WPA2-PSK/ WPA-PSK or AES.d) Ensure that SSID and password are no longer than 16 characterse) Ensure that SSID is broadcasted.f ) Ensure that the DHCP is enabled on router. j ) We suggest rebooting the router, and the "security settings, encryption method" of WiFi password should never choose "auto-select".k) Reset the camera to set up connection again. Press and hold SET key for 10 seconds. b) Ensure that camera is in range of router. Keep the distance less than 40fts between router and indoor camera, less than 65fts for outdoor camera. -15-4.Push message: when thermal source is detected, alarm message can be sent to server and pushed to your phone Troubleshooting10 1.Wi-Fi cannot be connected a) Ensure that the antenna of camera is fixed well. 8.Special Note: This QR code is same as the one sticked on the outdoor camera. It is used when user need to re-do the set up and scan this QR code to add the camera. Please safe keeping this camera ID QR code on the manual, in case QR code on camera may fall off after daily use under the sun and rain. 7.When this machine has a crash fault or other abnormal conditions influencing the usage, it is recommended to cut out the power and restart; or press SET key for 10 seconds, which can restore factory settings, and then please reconnect the router.2.Sharing with Friends: Share two-dimension code of the device with your friends.3.Cancel sharing with friends: Delete the camera and cancel sharing with friends. (You have to re-add the camera to use it again) 5.Remote monitoring: after the camera is connected to Internet successfully, app can view the monitor via Internet, anytime, anywhere. 6.Special characters are accessible only under English mode, and other punctuation mark used in other language inconsistent with that under English mode cannot be input. Available special characters include " @, #, &, *, ~, ｛, ｝, -, =, +, /, ?, (, )", and unavailable special characters include "%", "\", "<>". -13- Product SpecificationsImage sensor Camera resolutionView angle 60°Night vision range ≤20mWaterproof grade IP66 Operation voltage DC+12V/1A 1/4 inch, CMOS ※No additional notice will be made in case of any minor change. Our company reserves the right of final interpretation.1280x720Operation humidity 20% ~ 80% RHSize (LxWxH) Net weight Operation temperature -10℃ ~ + 35℃198x81x160mm(including support) 655g (including support)6 Camera Indicator InstructionRed link Indicator remains, power indicator remainsIndicates that power is on and no connection to networkRed link Indicator flashes , power indicator remainsIndicates that camera is connecting to network.Green link Indicator flashes, power indicator remainsIndicates that network connected successfully (no Internet).Green network remains, power indicator remainsIndicates the camera is connected to server and working well.5 -12-Add friends shareAdd by network cableAdd devicesca n the QR co de to addAdd b y WiFiNo Se rvice 11:5 0Add DeviceSca nID：No Service 11:50Scan the QR code for sharing with friendsDevice ListAdd dev iceExperience CenterLiving RoomNo Service 11:5 0(38) (39) (40)If other users want to add the camera, Click "Add Camera" → select "Add Fr iends to Sh are" mode (Figure 38)→ Click the QR code icon (Figure 39) , switch to the QR code scanning mode→ scan the QR code shared by friends→ Enter the Device List(Figure 40)Generate a QR code for sharing(can share this QR Code to multi- users)1. Click”setting” icon(Figure 35) → Click "share with friends"(Figure 36)→ you can have the QR code(Figure 37)share with friendsSteps to share with friendsStep 1:Open“Add Camera”on the mobile phone ofa friendStep 2:Select the fourth way to add,and scan QRcode(37)-10--9-Living Room2017/04/21 13:00No Se rvice 11:5 0SpeakSound SnapshotHD3563412View Monitoring and OperateAfter the device is connected, you can view real-time monitoring, and take a picture, record a video, speak, set up and make other operations on your mobile phone.1. Capture button: click to fast capture (save in the settings directory Album Book option).2. Playback button: Click to enter the playback page, you can view the camera SD card video file.3. Record button: Click to start recording, click the button again (stored in the set the directory of the album option).4. PTZ button: Click this button, APP pop-up PTZ control interface for Head level \ vertical angle to adjust (Figure 28).5. Sharpness button: Click to adjust the Resolution pixel for real-time video monitoring (HD/SD)6.Set button: Click this button to set the camera-related functions.Living Room2017 /04/21 13:0031°CNo Service 11:5 0HDRock er(27) (28)Software Upgrade1. Click “Settings” icon → Click “Device Information” (Figure 30) Click “System Firmware” (Figure 31) Click “Update Now” (Figure 32)(It can only be upgraded if there is a small red spot on the top right corner of the application firmware)(Figure 29)→ → 4FeaturesNo Service 11:5 0Can Update to 00.0 0.00.0 11.Optimize APP network pairing pro cedur e2.Optimize…3.Optimize…Upd ate Now Another TimeUpdateNo Se rvice 11:5 0SettingSta tus indicatorRot ate video 180 degreesNight visionSha re with f riend sWiF i set tingDev ice informationDelete deviceAlbumCam era t ime ch eckNo Se rvice 11:5 0(29) (30)(32) (31)-11-Device Unbinding1. “Settings” icon → “Delete Device”APP will automatically switch to camera list, delete the camera you want to Unbundled it from the APPClick (Figure 33) Click (Figure 34)SettingSta tus indicatorRot ate video 180 degreesNight visionShare with friendsWiF i settingDevice informationDelet e deviceAlbumCamera time checkNo Se rvice 11:5 0Add Friends to ShareSettingSta tus indicatorRot ate video 180 degreesNight visi onSha re with f riend sWiF i settingDev ice informationDelete deviceAlbumCamera time checkNo Se rvice 11:5 0 No Ser vice 11:50(33) (34)(35) (36)Living Room2017/04/21 13:0031°CNo Se rvice 11:5 0SpeakSound SnapshotLiving Room2017/04/21 13:0031°CNo Se rvice 11:5 0SpeakSound SnapshotLiving Room2017 /04/21 13:0031°CNo Service 11:5 0SpeakSound SnapshotThe Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Hereby, we declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.Notice: Observe the national local regulations in the location where the device Is to be used. This device may be restricted for use in some or all member states of the European Union (EU)This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.The operated frequency is 2.4G~2.4835G with B/G/N20/N40.The Max output power on 802.11b is 16.96dBm.The Max output power on 802.11g is 14.98dBm.The Max output power on 802.11n-20 is 15.12dBm.The Max output power on 802.11n-40 is 14.67dBmEU Environmental ProvisionsE-waste cannot be mixed with household garbage; corresponding local government sector or recycling stations shall be responsible for circular process.FCC/CE Certification InformationNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 11
RF_061, Issue 02 SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, [ShenZhen Gospell Smarthome Electronic Co., Ltd.] declares that the radio equipment type [T5922HAA] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:(www.goscam.com) Richie Xiao

Navigation menu