Gospell Smarthome Electronic T5922HAA HD Outdoor WiFi Camera User Manual 15 T5922HAA UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3670446
Application ID	4ShdT7P2S2OhR8bYh6dbTQ==
Document Description	15_T5922HAA UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	100.07kB (1250934 bits)
Date Submitted	2017-12-11 00:00:00
Date Available	2017-12-11 00:00:00
Creation Date	2017-12-04 17:35:37
Producing Software	Adobe Acrobat Pro 9.3.2
Document Lastmod	2017-12-04 17:35:37
Document Title	T5922HAA_Manual(3.5)说明书 20170630.cdr
Document Creator	Adobe Acrobat Pro 9.3.2
Document Author:	zzpalj

Appearance
HD Outdoor WiFi Camera
Installation
Scan QR Code to Add
Preparation prior to Installation
1.Click “Add Camera” (figure 4) → Click “scan the QR code to add”
(figure 5)
Register/Login
11:50
No Service
1. 2.4G wireless router is required.
2. Support Android 4.4 and above, iOS 8.0 and above
3. Download and install the APP:
A. Open the App Store , search “GOSCOM” and install.
B. Open the Google Play Store , search “GOSCOM” and install.
4. Here is an operation example of Android APP, and
it can serve as a reference for the iOS APP.
5. Power-on camera and red link Indicator remains,power
indicator remains.
Step 1: Tap the “GOSCOM” APP icon to open it (figure 1);
Step 2: Use email address for user ID registration (figure 2-3);
Step 3: After registration, enter the email address and then
password to log in (figure 2)
(2)
(3)
11:50
Add by network cable
Add device
Add friends share
11:50
No Service
Email
Enter password
Wall Socket
Register
Enter password again
Remember password
Password format: 8-16 characters in length, contain at least
two kinds among numbers,capital letters and lowercase
letters
11
(4)
Login
Register
11:50
11:50
No Service
Living Room
2017/04/21 13:00
11:50
Living Room
2017/04/21 13:00
Camera does not support 5G Wi-Fi;if this is not the
network you want,click to change
(Figure 16)
2017/04/21 13:00
TIP: For user ID registration, please use an effective email
address, (example XXXX@qq.com), in order to retrieve the
password.
No Service
11:50
11:50
No Service
Living Room
11:50
11:50
No Service
(6)
Device List
1280x720
60°
≤20m
View angle
Waterproof grade
Album
IP66
Operation voltage
Operation temperature
Night vision
Living Room
31°C
Scan the QR code for sharing with friends
Camera time check
Rotate video 180 degrees
scan the QR code to add
WiFi setting
Night vision
Sound
Share with friends
ID： Scan
Add by WiFi
Device information
Snapshot
Add by network cable
Speak
Snapshot
Add device
Speak
(33)
Camera time check
1. Capture button: click to fast capture (save in the settings
directory Album Book option).
2. Playback button: Click to enter the playback page, you can
view the camera SD card video file.
3. Record button: Click to start recording, click the button again
(stored in the set the directory of the album option).
4. PTZ button: Click this button, APP pop-up PTZ control interface
for Head level \ vertical angle to adjust (Figure 28).
5. Sharpness button: Click to adjust the Resolution pixel for
real-time video monitoring (HD/SD)
6.Set button: Click this button to set the camera-related functions.
Sound
Device information
Snapshot
Speak
(29)
No Service
11:50
Delete device
No Service
(30)
Experience Center
(38)
Add Friends to Share
Generate a QR code for sharing(can share this QR Code to
multi- users)
1. Click”setting” icon(Figure 35) → Click "share with friends"
(Figure 36)→ you can have the QR code(Figure 37)
11:50
11:50
No Service
Living Room
No Service
2017/04/21 13:00
11:50
share with friends
Setting
(40)
Camera Indicator Instruction
Indicates that power is on
and no connection to network
Album
Indicates that camera is
connecting to network.
Indicates that network
Green link Indicator flashes, connected
successfully
power indicator remains
(no Internet).
Red link Indicator flashes ,
power indicator remains
Status indicator
Update
Rotate video 180 degrees
Can Update to 00.00.00.01
Night vision
1.Optimize APP network pairing
procedure
2.Optimize…
3.Optimize…
Update Now
(39)
Red link Indicator remains,
power indicator remains
11:50
No Service
31°C
Share with friends
Another Time
Steps to share with friends
Camera time check
Sound
Snapshot
Operation humidity
Size (LxWxH)
Net weight
Packing Content
Antennax1
Camera x1
-10℃ ~ + 35℃
20% ~ 80% RH
198x81x160mm(including support)
655g (including support)
Manual x1
Wrench x1
Wall plug x4
-9-
(31)
-10-
(35)
WiFi setting
Step 1:Open“Add Camera”on the mobile phone of
a friend
Device information
Step 2:Select the fourth way to add,and scan QR
code
Delete device
-11-
(36)
Screw x4
※Pictures are for reference only, and the real object prevails.
Green network remains,
power indicator remains
※ No additional notice will be made in case of any
minor change. Our company reserves the right of
final interpretation.
Product Features
24/7 live video streaming
HD 720P provides excellent video quality
Push message to your phone when PIR sensor triggered.
Advanced video recording on built-in 4G micro-SD card
Night vision (20m visibility)
Quick & easy to set up
Indicates the camera is
connected to server and
working well.
Tips
1.Infrared detection: when thermal radiation source is
detected within the scope of camera, the camera will
record video and take photos automatically. Videos
and photos will be saved in built-in micro-SD card.
2.Sharing with Friends: Share two-dimension code of the
device with your friends.
3.Cancel sharing with friends: Delete the camera and
cancel sharing with friends. (You have to re-add the
camera to use it again)
4.Push message: when thermal source is detected,
alarm message can be sent to server and pushed to
your phone
Speak
(32)
Power adapterx1
DC+12V/1A
Add friends share
(34)
Delete device
WiFi setting
(28)
Confirm
Add friends share
Experience Center
(17)
(18)
(19)
2.Please press and hold the “SET” key for 1 second, and then
red link indicator flashes.(Figure 20)
11:50
Living Room
(23)
No Service
11:50
11:50
No Service
Add by WiFi
No Service
Device List
11:50
Living Room
2017/04/21 13:00
It will take about 1-2 minutes to WiFi network,
please wait
Living Room
Step 1: Connecting
(20)
Did you hear a “beep” sound?
Step 2: Binding
Step 3: Connect succeeded
I have heard it
Add device
Sound
Snapshot
Speak
Did not hear any sound?
Experience Center
(14)
(15)
(16)
3.Click the QR code icon
(Figure 21) , switch to the QR code
scanning mode, and scan the ID QR code
●QR code on the camera sticker (Figure 22) ;
●Or choose the QR code picture from the album for ID scanning
(Figure 23)
-6-
1/4 inch, CMOS
Image sensor
Camera resolution
Status indicator
(27)
Device List
please confirm the SSID and password arecorrect,
and SSID matches the WiFi of device
Add by network cable
Add device
(22)
4. After you click “Confirm”, when red link indicator turns to green,
indicates that the camera is connecting to the router.(Figure 24)
When you see that the indicator on the device turns from blinking
green to be steady on, it indicates that the device is connected
and will automatically skip to the device list. (Figure 25)
Click the device to enter the real-time monitoring interface.
(Figure 26)
(11)
-5-
Product Specifications
Night vision range
Status indicator
Share with friends
(10)
(7)
11:50
No Service
Add Device
Add device
Album
31°C
Rocker
No Service
(21)
Reset
PASSWORD
Add by WiFi
2017/04/21 13:00
-4-
If other users want to add the camera, Click "Add Camera" →
select "Add Friends to Share" mode(Figure 38)→ Click the QR
code icon
(Figure 39) , switch to the QR code scanning
mode→ scan the QR code shared by friends→ Enter the Device
List(Figure 40)
No Service
Setting
2017/04/21 13:00
Confirm
-3-
Rotate video 180 degrees
31°C
11:50
No Service
Scan QR Code
5.When the APP switch to the precaution page before scanning,
please read the prompts carefully and click "Next step"(Figure 12)
When the mobile phone shows a QR code interface, please align
the QR code to the camera, with a distance of about 10 ~ 20cm
(Figure 13); if scanning succeeds, red link indicator turns to green.
PASSWORD
please confirm the SSID and password arecorrect,
and SSID matches the WiFi of device
Confirm
Setting
11:50
scan the QR code to add
Camera does not support 5G Wi-Fi;if this is not the
network you want,click to change
Reset
PASSWORD
HD
Sound
(13)
Next
please confirm the SSID and password arecorrect,
and SSID matches the WiFi of device
11:50
No Service
ID： Scan
31°C
Device Unbinding
11:50
WiFi setting
31°C
1. Click “Settings” icon (Figure 33) → Click “Delete Device” (Figure 34)
APP will automatically switch to camera list, delete the camera you
want to Unbundled it from the APP
Living Room
HD
(12)
6. After scan the QR code, and when you see the link indicator turns to
green light, click “I Have Heard It” (Figure 14) , and now the camera is
connecting to the router WiFi. When you see that the indicator on the
device turns from blinking green to be steady on, it indicates that the
device is connected and will automatically skip to the device list.
(Figure 15) Click the device to enter the real-time monitoring interface.
Device Name：Camera
-2-
Software Upgrade
Press and hold the SET key for 1 second and then
you will hear Star t Configur tion Mode
11:50
No Service
Living Room
7.Support Frame
8.Antenna
9.Rain Cover
10.SET Button
11.DC 12V Power Plug
12.Screw hole
1. Click “Settings” icon (Figure 29) → Click “Device Information”
(Figure 30)→ Click “System Firmware” (Figure 31)→ Click “Update
Now” (Figure 32)(It can only be upgraded if there is a small red spot
on the top right corner of the application firmware)
No Service
Album
ID： Scan
I have raed this Agreement and agree to the
terms and conditions User agreement
-1-
No Service
Album
11:50
(Back)
Features
11:50
Album
Next
No Service
WiFi setting
Reset
After the device is connected, you can view real-time
monitoring, and take a picture, record a video, speak, set
up and make other operations on your mobile phone.
No Service
Press and hold the SET key for 1 second and then
you will hear Star t Configur tion Mode
(9)
11:50
11:50
No Service
WiFi setting
Forget password
View Monitoring and Operate
11:50
Add device
No Service
Album
Device Name：Camera
(5)
2.Configure WIFI, enter WiFi name and password, and click
“Confirm” after that. (figure 6)P.S:Device does not support 5G
Wi-Fi network; if this is not your desired network, tap to toggle.
(figure 7)
No Service
12
Scan QR Code
Camera does not support 5G Wi-Fi;if this is not the
network you want,click to change
Scan QR Code
Add Device
Get code
Enter address
please enter verification code sent to
your email(case sensitive)
Enter password
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
11:50
No Service
Confirm
4.Click the QR code icon
(Figure 9) , switch to the QR code
scanning mode, and scan the ID QR code
●QR Code on the camera sticker (Figure 10) ;
●Or choose the QR code picture from the album for ID scanning
(Figure 11)
Add by WiFi
11:50
No Service
(1)
Model: T5922HAA
No Service
Device List
No Service
1.Infrared Transmitter
2.Camera Lens
3.Light Sensor
4.Link Indicator
5.Power Indicator
6.Infrared Sensor
11:50
No Service
No prompt sound
scan the QR code to add
10
Quick Start Guide
10-20cm
Put this QR code at 10-20cm from the
camera, and when you hear a "beep"
prompt sound, click “I have heard it”
11:50
Add Device
1.Click “Add Camera” (Figure 17) → Click “Add by WIFI” (
Figure 18)→ Configure WIFI, enter WiFi name and password,
and click “Confirm” after that.(Figure 19)P.S:Device does not
support 5G Wi-Fi network; if this is not your desired network,
Click to toggle
Add device
Experience Center
(Front)
No Service
Add by WIFI
11:50
No Service
Device List
Quick Register
Power Adapter
11:50
Scan QR Code
I Have Heard It
No Service
Camera
No Service
(8)
3.Please press the “SET” key for 1 second, and then
red link indicator flashes,power indicator remains.(figure 8)
5.Remote monitoring: after the camera is connected to
Internet successfully, app can view the monitor via
Internet, anytime, anywhere.
6.Special characters are accessible only under English
mode, and other punctuation mark used in other
language inconsistent with that under English mode
cannot be input. Available special characters include
" @, #, &, *, ~, ｛, ｝, -, =, +, /, ?, (, )", and unavailable
special characters include "%", "\", "<>".
7.When this machine has a crash fault or other abnormal
conditions influencing the usage, it is recommended to
cut out the power and restart; or press SET key for 10
seconds, which can restore factory settings, and then
please reconnect the router.
8.Special Note: This QR code is same as the one sticked
on the outdoor camera. It is used when user need to
re-do the set up and scan this QR code to add the
camera. Please safe keeping this camera ID QR code
on the manual, in case QR code on camera may fall off
after daily use under the sun and rain.
10
Troubleshooting
1.Wi-Fi cannot be connected
a) Ensure that the antenna of camera is fixed well.
b) Ensure that camera is in range of router. Keep the
distance less than 40fts between router and indoor
camera, less than 65fts for outdoor camera.
c) Ensure that SSID and password of Wi-Fi contains no
special characters. Modify the SSID and password of
Wi-Fi with only English characters, no special
characters.
-7-
d) Ensure that SSID and password are no longer than
16 characters
e) Ensure that SSID is broadcasted.
f ) Ensure that the DHCP is enabled on router.
g) Ensure that Wi-Fi encryption method is WPA2-PSK/
WPA-PSK or AES.
h) Ensure that Wi-Fi signal is 2.4GHz.
i ) Ensure that there is no MAC filter on router or add
MAC address to router whitelist
j ) We suggest rebooting the router, and the "security
settings, encryption method" of WiFi password should
never choose "auto-select".
k ) Reset the camera to set up connection again. Press
and hold SET key for 10 seconds.
2.Red link Indicator remains, network connection is failed.
a) Ensure that the password of Wi-Fi is correct.
b) Ensure that the network connects to Internet freely.
c) Ensure that the camera is in range of Wi-Fi hotspot.
3.Green link Indicator flashes, connection to server failed.
a) Ensure that Wi-Fi signal is strong enough and
bandwidth is enough for connection. Move near to
Wi-Fi hotspot or increase the bandwidth.
b) Ensure that camera is not under interferon of other
2.4GHz signal.
11
FCC/CE Certification Information
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
(37)
-12-
-13-
-14-
-15-
-16-
Add device
Sound
Snapshot
Speak
connecting failde in over 2 minutes
Experience Center
(24)
(25)
(26)
-8-
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The Maximum Permissible Exposure (MPE) level has been calculated based
on a distance of d=20 cm between the device and the human body. To maintain
compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body. Hereby, we declares that this
device is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
Notice: Observe the national local regulations in the location where the device I
s to be used. This device may be restricted for use in some or all member states
of the European Union (EU)
The operated frequency is 2.4G~2.4835G with B/G/N20/N40.
The Max output power on 802.11b is 16.96dBm.
The Max output power on 802.11g is 14.98dBm.
The Max output power on 802.11n-20 is 15.12dBm.
The Max output power on 802.11n-40 is 14.67dBm
EU Environmental Provisions
E-waste cannot be mixed with household
garbage; corresponding local government
sector or recycling stations shall be
responsible for circular process.
-17-
RF_061, Issue 02
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, [ShenZhen Gospell Smarthome Electronic Co., Ltd.]
declares that the radio equipment type [T5922HAA] is in
compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet
address:(www.goscam.com)
Richie Xiao

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : zzpalj
Create Date                     : 2017:12:04 17:35:37+08:00
Modify Date                     : 2017:12:04 17:35:37+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2017:12:04 17:35:37+08:00
Creator Tool                    : Adobe Acrobat Pro 9.3.2
Format                          : application/pdf
Title                           : T5922HAA_Manual(3.5)说明书 20170630.cdr
Creator                         : zzpalj
Document ID                     : uuid:d01724f4-ae41-4d1b-812d-28743391ffbb
Instance ID                     : uuid:499d62ed-3c20-492a-afc7-22afd3ae4bdb
Producer                        : Adobe Acrobat Pro 9.3.2
Page Count                      : 2
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools