Graco 332564B Promix Pd2K Proportioner Users Manual 332564B, For Automatic Spray Applications, Operation, English

2015-04-02

• toc
  • Contents
    • Related Manuals
    • Models
    • Warnings
    • Important Isocyanate (ISO) Information
      • Isocyanate Conditions
      • Keep Components A and B Separate
      • Moisture Sensitivity of Isocyanates
      • Changing Materials
    • General Information
    • Advanced Display Module (ADM)
      • ADM Display
      • USB Download Procedure
      • USB Upload Procedure
      • ADM Keys and Indicators
      • Soft Key Icons
      • Navigating the Screens
      • Screen Icons
    • Pre-Operation Tasks
      • Pre-operation Checklist
      • Power On
      • Initial System Setup
      • Flush Before Using Equipment
      • Valve Settings
    • Pressure Relief Procedure
      • Without Color Change
      • With Color Change
    • Operation Using Automatic Display Module (ADM)
      • Prime and Fill the System
      • Spraying
      • Purging
        • Flush Mixed Material
        • Flush the System
      • Shutdown
    • Operation Using a Programmable Logic Controller (PLC)
      • Network Communications and Discrete I/O
      • Discrete I/O
        • Digital Inputs
        • Analog Inputs
      • Communication Gateway Module (CGM) Details
        • CGM Overview
        • CGM Kits
      • Network Communication I/O Data Map
        • ProMix PD2K Network Outputs
        • Notes
        • Network Output Data Map (Read Only)
        • ProMix PD2K Network Inputs
        • Notes
        • Network Input Data Map (Write/Read)
      • Operation Flow Charts
        • Purge Mode Sequence
        • Inactive Pump Flush and Prime Sequences
        • Color Change Sequence
        • Mixing Sequence
        • Alarm Clearing Sequence
      • Network Communication - Dynamic Command Structure (DCS)
        • Dynamic Command Description
        • Figure 13 Dynamic Command Structure Timing
        • List of DCS Commands
        • Write User ID
        • Write Recipe
        • Write Flush Sequence
        • Write Fluid Control Mode
        • Read User ID
        • Read Recipe
        • Read Flush Sequence
        • Read Fluid Control Mode
        • Read Job Info
        • Read Alarm Info
        • Read Event Info
      • Flow Control System
        • Overview
        • Normal Flow Control
        • Pressure Control
        • Gun On/Off Prediction
        • System Startup and Defaults
    • Run Mode Screens
      • Opening Screen
      • Home Screen
      • Spray Screen
      • Fill Screen
      • Usage Screen
      • Jobs Screen
      • Errors Screen
      • Events Screen
    • Setup Mode Screens
      • Password Screen
      • System Screen 1
        • Diagnostic Mode
        • Color Pumps
        • Catalyst Pumps
        • Non-Mix Pressure
        • Solvent Meter
        • Solvent K-Factor
      • System Screen 2
        • Mix Pressure Tolerance
        • Stall Test Pressure
        • Pump Stall Test
        • Maximum Leak Rate
        • Mix Idle Timeout
        • Mix No Flow Timeout
        • Low Flow Tolerance
        • Low Flow Timeout
      • System Screen 3
        • Gun Hose Length
        • Gun Hose Diameter
        • Mix At Wall
        • Hose Length and Diameter
      • System Screen 4
        • Gateway ID
        • Enable
        • DHCP
        • TCP/IP
      • System Screen 5
        • Fluid Control
        • Manual Override
        • Gun Trigger Signal
        • Flow Control (Setpoint Signal)
        • Stepup Gain and Stepdown Gain
      • Recipe Screen
        • Recipe
        • Recipe 0
        • Enabled
        • Color (A) Valve
        • Catalyst (B) Valve
        • Flush Sequence
        • Mix Ratio
        • Potlife Time
      • Flush Screen
        • Flush Number
        • Gun Purge Time
        • Initial Flush
        • Final Flush
        • Wash Cycles
        • Strokes per Wash Cycle
      • Pump Screen 1
        • Pump Size
        • Inlet Pressure
        • Select Color Change
        • Materials
        • Hose Length
        • Hose Diameter
        • Available Colors
      • Pump Screen 2
        • Default Settings Selected
        • Default Settings Not Selected
      • Pump Screen 3
      • Pressure Alarm and Deviation Limits
      • Calibration Screens
        • Calibrate Screen 1
        • Calibrate Screen 2
        • Calibrate Screen 3
      • Maintenance Screens
        • Maintenance Screen 1
        • Maintenance Screen 2
        • Maintenance Screen 3
        • Maintenance Screen 4
      • Advanced Screen 1
        • Language
        • Date Format
        • Date
        • Time
        • Password
        • Screen Saver
        • Silent Mode
      • Advanced Screen 2
        • Display Units
      • Advanced Screen 3
        • Enable USB Downloads/Uploads
        • Download Depth
        • Log 90% Full Advisory Enabled
        • Advanced Screen 4
    • Calibration Checks
      • Pump Pressure Check
      • Pump Volume Check
      • Solvent Meter Calibration
    • Color Change
      • Single Color Systems
      • Multiple Color Systems
    • System Errors
      • To Clear Error and Restart
      • Gun Trigger Input Function
      • Error Codes
    • Maintenance
      • Preventive Maintenance Schedule
      • Flushing
      • Cleaning the ADM
    • Technical Data
    • Graco Standard Warranty
      • Graco Information
• tables
  • Table 1 : ADM Keys and Indicators
  • Table 2 : Soft Key Functions
  • Table 3 PD2K Discrete I/O Connections
  • Table 4 Pump States for Output Registers 01–04
  • Table 5 Dynamic Commands with Command ID