Graco 3A1602G Reactor E 8P Engllish Users Manual 8p, Instructions Parts,

2015-04-02

• Systems
• Proportioners
• Related Manuals
• Warnings
• Important Two-Component Material Information
  • Isocyanate Conditions
  • Material Self-ignition
  • Keep Components A and B Separate
  • Moisture Sensitivity of Isocyanates
  • Foam Resins with 245 fa Blowing Agents
  • Changing Materials
• Overview
• Component Identification
• Controls and Indicators
• Setup
  • Location
  • Electrical Requirements
  • Grounding
  • Lock/Unlock Handle
  • Install 38 mm Spout Adapter
  • Install Desiccant Dryers
  • Install Optional Recirculation Kit
  • Connect Fluid Hoses
  • Connect Gun to Air Hose (Air Operated Guns Only)
  • Connect Main Air Supply
  • Flush Before Using Equipment
  • Fill Wet-cups
  • Install Pail Heaters
  • Recirculate Material
  • Purge Air and Flush Fluid
  • Connect Fluid Inlet Tubes
• Spraying
• Pressure Relief Procedure
• Shutdown
• Maintenance
• Flushing
• Troubleshooting
  • Status Codes
  • Troubleshooting Chart
• Repair
  • Before Beginning Repair
  • Recirculation/Spray Valves
  • Displacement Pump
  • Replace Function Knob/Potentiometer
  • Control Board
  • Pressure Transducers
  • Drive Housing
  • Cycle Counter Switch Replacement
  • Electric Motor
  • Motor Brushes
  • Fan
  • Spout Adapter
• Parts
• Suggested Spare Replacement Parts
• Accessories
• Dimensions
• Technical Data
• Graco Standard Warranty