Graco Reactor E 10Hp Users Manual Flyer

: Graco Graco-Reactor-E-10Hp-Users-Manual-686242 graco-reactor-e-10hp-users-manual-686242 graco pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

Reactor E-10hp
®

Portable High-Pressure Proportioner

Entry level system for pure and hybrid polyurea coatings
• Ideal for small to medium projects such as terraces, pools, balconies, tanks, truck bedliners,
containment and waterproofing
• Heats material fast
• Portable and easy to use
• Uses standard residential electrical outlets – no generator needed
• Affordable investment – compared to a standard Reactor which requires a generator and spray rig

Power, pressure and performance
Grow your business with polyurea applications
The Reactor E-10hp is an ideal entry-level system and is great for coating
projects such as balconies, pools, waterproofing and bedliner applications.
It’s a smart, affordable investment that will help your business grow.
™

And even though it’s an entry-level system, it still packs plenty of power. The Reactor
E-10hp adds high pressure to give you the power and performance you need to
spray polyurea coatings. This compact unit is lightweight and portable – and even
runs on residential power so you don’t need to invest in a generator.

Boost heat for fast, 20-minute startup times*
With the system’s innovative boost heat and insulated tanks, material heats up
fast so you’re up and running sooner. In fact, you’re ready to spray in a fraction
of the time, compared to over an hour startup time on a standard Reactor E-10 .
™

The boost heat uses the extra available power from the motor circuit when the
machine is recirculating and applies that extra power to additional heater rods.
Which means that during recirculation mode, you have additional total heater
amperage for faster material heating.

Material Output

* Startup time is 20 minutes with the 230V model.

Material Output

This chart determines material output based
on pressure and selected mix chamber.

PRESSURE vs FLOW — E-10hp, E-10 with various mix chambers
3500

Examples:
• At 2200 psi with a AW2222 mix chamber,
output is nearly 0.9 gpm

Recirculation Times

(207)

E-10hp-120V

E-10hp/120V

2000

(138)

AR2929
(00)

E-10

MIX CHAMBERS

(103)

AR4242
(01)

AR2020
(000)

1000

(69)

AW2222
AR2929

500

(00)

(34)

AR4242
(01)

0

0.2

0.4

(.75)

0.6

(1.5)

0.8

(2.3)

1

(3.0)

1.2

(3.8)

(4.5)

FLOW gpm (lpm)

• S traight vertical portion of the line represents Delta T
of primary heaters

Recirculation Times
MAX SPRAY TEMPERATURE vs TIME — E-10hp, E-10

To calculate necessary tank temperatures, subtract Delta T
from your desired spray temperature.

180°

MACHINES

(82)

160°
(71)

230V
Reactor E-10hp

∆ = 30°F (17°C)

∆ = 45°F (25°C)

∆ = 27°F (15°C)

140°

120V
Reactor E-10hp

∆ = 26°F (14°C)

(60)

(assuming 1 gpm flow)

MAXIMUM SPRAY TEMPERATURE °F (°C)

• You want to spray the 120V E-10hp at 150°F (66°C).
Subtract 30°F (17°C) (Delta T) from 150°F (66°C) for a tank
temperature of 120°F (49°C). It will take about 24 minutes
of recirculation time to reach a tank temp of 120°F (49°C).

E-10hp-230V

1500

• Curved portion of line represents tank temperature

• You want to spray the 230V E-10hp at 170°F (77°C).
Subtract 45°F (25°C) (Delta T) from 170°F (77°C) for a tank
temperature of 125°F (52°C). It will take about 20 minutes
of recirculation time to reach a tank temp of 125°F (52°C).

AW2222

E-10hp/230V

(172)

Use this chart to determine which Reactor E-10 model
is best suited for your application needs. This chart
determines recirculation times and tank temperatures
necessary to achieve your final spraying temperature.

Examples:

E-10

AR2020
(000)

2500
PRESSURE PSI (Bar)

• At 1800 psi with a AR2929 mix chamber,
output is nearly 1 gpm

MACHINES

(241)

3000

120°

230V
Reactor E-10

(49)

100°

120V
Reactor E-10

(38)

80°
(27)

60°
(16)

2

0

10

20

30

40
TIME (minutes)

50

60

70

Digital heat controls
• Allows you to enter the exact temperatures you need
• Uses the same circuit boards as a standard Reactor

Single knob motor operation
• Intuitive, easy to use

Insulated tanks
• Double-wall insulated to retain heat
• Smooth interior lining for easy cleaning
• Improved seal design on lid for better moisture control

Low level sensors
• Indicates when material is low
(1 gal / 3.8 L remaining)
• No contact with materials – prevents buildup

Boost heat
• Directs unused power from the motor
circuit to additional heater rods
• Additional heater power brings
material to desired temperatures
faster during recirculation mode

Robust hybrid heater
• More power, faster material
heating means more uptime

Motor
• Offers 50% more power than the Reactor E-10
• Provides improved spray performance with reduced
pressure drop

Quick knockdown lower pumps
• Easy disassembly and maintenance

Temperature gauges in Y-strainers
• Provides accurate tank temperature readings

Portable
• Fits through standard doorways
• Plugs into standard 120V or 230V outlets
• Rugged wheels for extreme jobsites
• No need for generator

Wide tank opening
• Easy material loading and easy to clean

3

Technical Specifications
VOLTAGE

230V

120V

Machine pressure rating

3000 psi (206 bar, 20.6 MPa)

3000 psi (206 bar, 20.6 MPa)

Max spray pressure

2500 psi (172 bar, 17.2 MPa)

2200 psi (152 bar, 15.2 MPa)

Max flow rate

1 gpm (3.8 lpm)

1 gpm (3.8 lpm)

Max fluid temperature

170°F (77°C)

170°F (77°C)

Recirculation time to 170°F (77°C) *

20 min

40 min

Primary heat

2760 watts

2000 watts

Boost heat

1240 watts

1000 watts

Total heat

4000 watts

3000 watts

Hopper capacity

6 gal (23 L)

6 gal (23 L)

Max hose length

105 ft (32 m)

105 ft (32 m)

Size (w x d x h)

29x36x46 in (73x91x117 cm)

29x36x46 in (73x91x117 cm)

Weight

239 lb (108 kg)

239 lb (108 kg)

Recommended chamber sizes

000, AW2222 and 00 and 01 at reduced pressure

000, AW2222 and 00 and 01 at reduced pressure

Electrical requirements

(2) 15 Amp outlets

(2) 20 Amp outlets

Manual

332144

332144

* 70°F (21°C) initial material temperature, 5 gal (19 l) material per tank

Ordering Information
24T100	

Reactor E-10hp, 120V, bare

24T900	

Reactor E-10hp, 230V, bare

APT100	Reactor E-10hp, 120V, package with Fusion AP Gun,
AW2222 chamber

P2T900	Reactor E-10hp, 230V, package, with P2 Gun,
GC250A chamber and GC251A tip
25R000	

5 Hose bundle for E-10hp, 35 ft (11 m), 3000 psi (206 bar)

249810	

Fusion AP gun, AW2222 mix chamber

APT900	Reactor E-10hp, 230V, package with Fusion AP Gun,
AW2222 chamber

GCP2RA	 P2 Gun, GC250A chamber and GC251A tip
24E727	

Recirculation hardware kit for P2 gun

P2T100	Reactor E-10hp, 120V, package, with P2 Gun,
GC250A chamber and GC251A tip

24U342	

Lift ring kit

Contact us today!
To receive product information or talk with a Graco representative,
call 800-746-1334 or visit us online at www.graco.com.
©2013-2014 Graco Inc. 349015 Rev. B 01/14 All written and visual data contained in this document are based on the latest product
information available at the time of publication. Graco reserves the right to make changes at any time without notice. All other brand names
or marks are used for identification purposes and are trademarks of their respective owners.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2013:12:26 12:25:55-06:00
Metadata Date                   : 2013:12:27 06:36:42-06:00
Modify Date                     : 2013:12:27 06:36:42-06:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:c7f89079-22f3-514c-884a-b976d56c0dad
Original Document ID            : xmp.did:FC7F117407206811B34B824972AF0A43
Document ID                     : xmp.id:7EEC681D17206811822AB61CDC5CA19F
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:E8CEA45308206811822AB61CDC5CA19F
Derived From Document ID        : xmp.did:7864157407206811822AB61CDC5CA19F
Derived From Original Document ID: xmp.did:FC7F117407206811B34B824972AF0A43
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2013:12:26 12:25:55-06:00
Format                          : application/pdf
Title                           : Reactor E-10hp flyer
Creator                         : 
Subject                         : Graco, HPCF, Reactor, Reactor E-10hp, E-10hp, high-pressure E-10, polyurea, proportioner, sprayer, protective coatings, flyer
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Keywords                        : Graco, HPCF, Reactor, Reactor E-10hp, E-10hp, high-pressure E-10, polyurea, proportioner, sprayer, protective coatings, flyer
Page Layout                     : SinglePage
Page Mode                       : UseThumbs
Page Count                      : 4
Warning                         : [Minor] Ignored duplicate Info dictionary

EXIF Metadata provided by EXIF.tools