Graco Reactor E 10Hp Users Manual Flyer

: Graco Graco-Reactor-E-10Hp-Users-Manual-686242 graco-reactor-e-10hp-users-manual-686242 graco pdf

Open the PDF directly: View PDF .
Page Count: 4

Reactor® E-10hp

Portable High-Pressure Proportioner

Entry level system for pure and hybrid polyurea coatings

• Ideal for small to medium projects such as terraces, pools, balconies, tanks, truck bedliners,

containment and waterproofing

• Heats material fast

• Portable and easy to use

• Uses standard residential electrical outlets – no generator needed

• Affordable investment – compared to a standard Reactor which requires a generator and spray rig

AW2222

AR2020

(000)

AR4242

(01)

AR2929

(00)

E-10

E-10hp/120V

E-10hp/230V

PRESSURE PSI (Bar)

3500

(241)

3000

(207)

2500

(172)

2000

(138)

1500

(103)

1000

(69)

500

(34)

FLOW gpm (lpm)

PRESSURE vs FLOW — E-10hp, E-10 with various mix chambers

Material Output

0 0.2

(.75)

0.4

(1.5)

0.6

(2.3)

0.8

(3.0)

1

(3.8)

1.2

(4.5)

E-10

E-10hp-120V

E-10hp-230V

MACHINES

MIX CHAMBERS

AR2020

(000)

AW2222

AR2929

(00)

AR4242

(01)

MAXIMUM SPRAY TEMPERATURE °F (°C)

(assuming 1 gpm flow)

60°

(16)

80°

(27)

100°

(38)

120°

(49)

140°

(60)

160°

(71)

180°

(82)

TIME (minutes)

0 10 3020 40 50 60 70

Reactor E-10hp

Reactor E-10hp

Reactor E-10

Reactor E-10

MACHINES

230V

120V

230V

120V

MAX SPRAY TEMPERATURE vs TIME — E-10hp, E-10

Recirculation Times

∆ = 30°F (17°C)

∆ = 27°F (15°C)

∆ = 26°F (14°C)

∆ = 45°F (25°C)

Grow your business with polyurea applications

The Reactor E-10hp™ is an ideal entry-level system and is great for coating

projects such as balconies, pools, waterproofing and bedliner applications.

It’s a smart, affordable investment that will help your business grow.

And even though it’s an entry-level system, it still packs plenty of power. The Reactor

E-10hp adds high pressure to give you the power and performance you need to

spray polyurea coatings. This compact unit is lightweight and portable – and even

runs on residential power so you don’t need to invest in a generator.

Boost heat for fast, 20-minute startup times*

With the system’s innovative boost heat and insulated tanks, material heats up

fast so you’re up and running sooner. In fact, you’re ready to spray in a fraction

of the time, compared to over an hour startup time on a standard Reactor E-10™

.

The boost heat uses the extra available power from the motor circuit when the

machine is recirculating and applies that extra power to additional heater rods.

Which means that during recirculation mode, you have additional total heater

amperage for faster material heating.

Material Output

This chart determines material output based

on pressure and selected mix chamber.

Examples:

• At 2200 psi with a AW2222 mix chamber,

output is nearly 0.9 gpm

• At 1800 psi with a AR2929 mix chamber,

output is nearly 1 gpm

Recirculation Times

Use this chart to determine which Reactor E-10 model

is best suited for your application needs. This chart

determines recirculation times and tank temperatures

necessary to achieve your final spraying temperature.

• Curved portion of line represents tank temperature

• Straight vertical portion of the line represents Delta T

of primary heaters

To calculate necessary tank temperatures, subtract Delta T

from your desired spray temperature.

Examples:

• You want to spray the 230V E-10hp at 170°F (77°C).

Subtract 45°F (25°C) (Delta T) from 170°F (77°C) for a tank

temperature of 125°F (52°C). It will take about 20 minutes

of recirculation time to reach a tank temp of 125°F (52°C).

• You want to spray the 120V E-10hp at 150°F (66°C).

Subtract 30°F (17°C) (Delta T) from 150°F (66°C) for a tank

temperature of 120°F (49°C). It will take about 24 minutes

of recirculation time to reach a tank temp of 120°F (49°C).

* Startup time is 20 minutes with the 230V model.

2

Power, pressure and performance

Digital heat controls

• Allows you to enter the exact temperatures you need

• Uses the same circuit boards as a standard Reactor

Insulated tanks

• Double-wall insulated to retain heat

• Smooth interior lining for easy cleaning

• Improved seal design on lid for better moisture control

Motor

• Offers 50% more power than the Reactor E-10

• Provides improved spray performance with reduced

pressure drop

Boost heat

• Directs unused power from the motor

circuit to additional heater rods

• Additional heater power brings

material to desired temperatures

faster during recirculation mode

Single knob motor operation

• Intuitive, easy to use

Robust hybrid heater

• More power, faster material

heating means more uptime

Low level sensors

• Indicates when material is low

(1 gal / 3.8 L remaining)

• No contact with materials – prevents buildup

Temperature gauges in Y-strainers

• Provides accurate tank temperature readings

Wide tank opening

• Easy material loading and easy to clean

Quick knockdown lower pumps

• Easy disassembly and maintenance

Portable

• Fits through standard doorways

• Plugs into standard 120V or 230V outlets

• Rugged wheels for extreme jobsites

• No need for generator

3

Technical Specifications

Ordering Information

24T100 Reactor E-10hp, 120V, bare

24T900 Reactor E-10hp, 230V, bare

APT100 Reactor E-10hp, 120V, package with Fusion AP Gun,

AW2222 chamber

APT900 Reactor E-10hp, 230V, package with Fusion AP Gun,

AW2222 chamber

P2T100 Reactor E-10hp, 120V, package, with P2 Gun,

GC250A chamber and GC251A tip

P2T900 Reactor E-10hp, 230V, package, with P2 Gun,

GC250A chamber and GC251A tip

25R000 5 Hose bundle for E-10hp, 35 ft (11 m), 3000 psi (206 bar)

249810 Fusion AP gun, AW2222 mix chamber

GCP2RA P2 Gun, GC250A chamber and GC251A tip

24E727 Recirculation hardware kit for P2 gun

24U342 Lift ring kit

* 70°F (21°C) initial material temperature, 5 gal (19 l) material per tank

VOLTAGE 230V 120V

Machine pressure rating 3000 psi (206 bar, 20.6 MPa) 3000 psi (206 bar, 20.6 MPa)

Max spray pressure

2500 psi (172 bar, 17.2 MPa)

2200 psi (152 bar, 15.2 MPa)

Max flow rate 1 gpm (3.8 lpm) 1 gpm (3.8 lpm)

Max fluid temperature 170°F (77°C) 170°F (77°C)

Recirculation time to 170°F (77°C) * 20 min 40 min

Primary heat 2760 watts 2000 watts

Boost heat 1240 watts 1000 watts

Total heat 4000 watts 3000 watts

Hopper capacity 6 gal (23 L) 6 gal (23 L)

Max hose length 105 ft (32 m) 105 ft (32 m)

Size (w x d x h) 29x36x46 in (73x91x117 cm) 29x36x46 in (73x91x117 cm)

Weight 239 lb (108 kg) 239 lb (108 kg)

Recommended chamber sizes 000, AW2222 and 00 and 01 at reduced pressure 000, AW2222 and 00 and 01 at reduced pressure

Electrical requirements (2) 15 Amp outlets (2) 20 Amp outlets

Manual 332144 332144

©2013-2014 Graco Inc. 349015 Rev. B 01/14 All written and visual data contained in this document are based on the latest product

information available at the time of publication. Graco reserves the right to make changes at any time without notice. All other brand names

or marks are used for identification purposes and are trademarks of their respective owners.

Contact us today!

To receive product information or talk with a Graco representative,

call 800-746-1334 or visit us online at www.graco.com.