Grandex BR500-01 The MeatProbe Bridge User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3848284
Application ID	rEH5a1Ysc4NwdTxrlz/f1g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.79kB (234860 bits)
Date Submitted	2018-05-12 00:00:00
Date Available	2018-05-12 00:00:00
Creation Date	2018-05-02 09:37:14
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2018-05-10 16:22:45
Document Title	User manual
Document Creator	Microsoft® Office Word 2007
Document Author:	ChiaminHung

The MeatProbe Ultimate BBQ Set
Quick Start Guide
Step 1 | Download
Step 2 | Power
Step 3 | Setup
Download The MeatProbe app on iOS
Use the included Micro USB cables to
Open the app and follow the instructions
or Android to your mobile device.
power on the Bridge and Charger with a
to setup an account and the MeatProbe
Visit theMeatProbe.com/app
USB charger or a USB battery pack for
Bridge. Attach the included antenna to the
portability. Place a MeatProbe into the
threaded antenna post on the Bridge.
Charger to begin charging.
Step 4 | WiFi
When prompted,
Step 6 | Let’s cook!
Step 5 | The MeatProbe
enter
your
WiFi
It
is recommended
to
charge
each
With everything setup and ready to go,
credentials. The WiFi icon will appear
MeatProbe for at least an hour before the
add a recipe in the app and get cooking.
on the Bridge’s LCD screen when the
first use. If the Charger’s LED is flashing
Enjoy your perfectly cooked meat!
connection is successful. When turned
orange, the MeatProbe has enough power
on, the Bridge will always connect to
for most cooking situations.
the last connected WiFi.
Any Questions or Problems?
Visit us at http://grandex.com.tw/support
FAQ
What are the meanings of the audible/visual alerts?
Long beep – Cook is added/edited.
Three beeps repeated and internal temperature icon flashes – Early
warning temperature has been reached.
Constant beeps – Target temperature has been reached.
Two beeps repeated and ambient temperature icon flashes – Ambient
temperature is too low or too high.
Two short beeps repeated every five seconds and Bluetooth icon
flashes or is gone – Bridge has lost connection with the MeatProbe.
One short beep repeated every ten seconds and name of cook flashes
– The MeatProbe has low batteries.
How do I stop the audible alarm?
Clinking the next button will stop the alarm.
How do I turn off the LCD backlight?
Long press and release the button. This will toggle between an always
on backlight and a temporary 30 second backlight. Clicking the next
button will then turn on the backlight.
Can I toggle between ºF and ºC?
You can change to your preferred temperature scale in the app
settings and recreate the cook.
Do I need to setup the WiFi each time I use the Bridge?
The Bridge remembers the last connected WiFi. If it is unable to
connect on boot, it will rebroadcast its WiFi signal so that it can be
connected to another WiFi.
Any Questions or Problems?
Visit us at http://grandex.com.tw/support
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
The distance between user and products should be no less than 20cm
Any Questions or Problems?
Visit us at http://grandex.com.tw/support

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : ChiaminHung
Create Date                     : 2018:05:02 09:37:14+08:00
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2018:05:10 16:22:45+08:00
Metadata Date                   : 2018:05:10 16:22:45+08:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:aada4599-6987-42ef-afc0-f03c12f6cc63
Instance ID                     : uuid:d521684c-c244-4763-b703-354f249da1a9
Page Count                      : 3
Author                          : ChiaminHung

EXIF Metadata provided by EXIF.tools