Gree Electric Appliances of Zhuhai SAA1FB1F Remote Controller User Manual User Manul

Download:
Mirror Download [FCC.gov]
Document ID	2480901
Application ID	EqpgtfYZb00VlHX1yvWvOw==
Document Description	140815007GZU_2ADAP-SAA1FB1F_User Manual-1_Rev1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	239.01kB (2987566 bits)
Date Submitted	2014-12-22 00:00:00
Date Available	2014-12-22 00:00:00
Creation Date	2014-12-20 11:52:34
Producing Software	GPL Ghostscript 8.70
Document Lastmod	2014-12-20 11:52:40
Document Title	User Manul.pdf
Document Creator	PDFCreator Version 0.9.9
Document Author:	Helen.Ma

Split Air Conditioner
Models: GWH09UC-D3DNA4A/I
GWH12UC-D3DNA4A/I
GWH18UC-D3DNA4A/I
GWH09UC-D3DNA4C/I
GWH12UC-D3DNA4C/I
GWH18UC-D3DNA4C/I
Thank you for choosing our product.
For proper operation, please read and keep this manual carefully.
If you have lost the Owner’s Manual, please contact the local agent or visit www.gree.com
or sent email to global@gree.com.cn for electronic version.
Specialties note
Matching instructions
This model adopts RF remote control. The remote controller
shall be matched with the air conditioner before operation,
otherwise the remote control will be invalid.
Before operation, please read the instructions in this page
carefully and then do the corresponding matching operation.
Note
Please do the following operation within 2m from the unit. Matching is not
needed anymore once it is done.
During matching, please keep the remote controller and air conditioner under
standby status.
When the signal of remote controller can’t be received, please match the remote
controller with the unit again.
Matching of remote controller
When the unit is under standby status, please get close to the air conditioner within 2m
and then hold on pressing Humidify/Health button for 3s. The remote controller and air
conditioner will enter matching automatically. If matching is done, the unit will give out
three sounds; if matching is failed, please get closer to the unit and arrange matching
again.
Content
Operation Notices
Precautions............................................................................................................1
Parts name ........................................................................................................... 9
Screen Operation Guide
Buttons on remote controller ................................................................................10
Introduction for icons on display screen ...............................................................10
Introduction for buttons on remote controller ...................................................... 11
Function introduction for combination buttons ......................................................17
Operation guide ....................................................................................................18
Replacement of batteries in remote controller ......................................................18
Operation of Smart Control (Smart Phone, Tablet PC) ....................................... 19
Emergency operation ...........................................................................................27
Maintenance
Clean and maintenance....................................................................................... 27
Malfunction
Malfunction analysis ............................................................................................ 30
Installation Notice
Installation dimension diagram ............................................................................ 34
Tools for installation ............................................................................................. 35
Selection of installation location .......................................................................... 35
Requirements for electric connection .................................................................. 36
Installation
Installation of indoor unit...................................................................................... 37
Vacuum pumping ................................................................................................. 42
Leakage detection ............................................................................................... 42
Check after installation ........................................................................................ 43
Test and operation
Test operation ...................................................................................................... 43
Attachment
Configuration of connection pipe ......................................................................... 44
Pipe expanding method ....................................................................................... 46
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not dispose this product as unsorted municipal waste. Collection of
such waste separately for special treatment is necessary.
Explanation of Symbols
Indicates a hazardous situation that, if not avoided, will
result in death or serious injury.
Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation that, if not avoided, may
result in minor or moderate injury.
Indicates important but not hazard-related information,
used to indicate risk of property damage.
Indicates a hazard that would be assigned a signal word
WARNING or CAUTION.
Precautions
WARNING
Operation and Maintenance
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Do not connect air conditioner to multi-purpose socket.
Otherwise, it may cause fire hazard.
Do disconnect power supply when cleaning air
conditioner. Otherwise, it may cause electric shock.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Do not wash the air conditioner with water to avoid
electric shock.
Do not spray water on indoor unit. It may cause electric
shock or malfunction.
After removing the filter, do not touch fins to avoid injury.
Do not use fire or hair dryer to dry the filter to avoid
deformation or fire hazard.
Precautions
WARNING
Maintenance must be performed by qualified
professionals. Otherwise, it may cause personal injury
or damage.
Do not repair air conditioner by yourself. It may cause
electric shock or damage. Please contact dealer when
you need to repair air conditioner.
Do not extend fingers or objects into air inlet or air
outlet. It may cause personal injury or damage.
Do not block air outlet or air inlet. It may cause
malfunction.
Do not spill water on the remote controller, otherwise the
remote controller may be broken.
When below phenomenon occurs, please turn off air
conditioner and disconnect power immediately, and then
contact the dealer or qualified professionals for service.
● Power cord is overheating or damaged.
● There’s abnormal sound during operation.
● Circuit break trips off frequently.
● Air conditioner gives off burning smell.
● Indoor unit is leaking.
If the air conditioner operates under abnormal conditions,
it may cause malfunction, electric shock or fire hazard.
When turning on or turning off the unit by emergency
operation switch, please press this switch with an insulating
object other than metal.
Do not step on top panel of outdoor unit, or put heavy
objects. It may cause damage or personal injury.
Precautions
WARNING
Attachment
Installation must be performed by qualified professionals.
Otherwise, it may cause personal injury or damage.
Must follow the electric safety regulations when installing
the unit.
According to the local safety regulations, use qualified
power supply circuit and circuit break.
Do install the circuit break. If not, it may cause malfunction.
An all-pole disconnection switch having a contact separation
of at least 3mm in all poles should be connected in fixed
wiring.
Including an circuit break with suitable capacity, please
note the following table.Air switch should be included
magnet buckle and heating buckle function, it can protect
the circuit-short and overload.
Air Conditioner should be properly grounded. Incorrect
grounding may cause electric shock.
Don't use unqualified power cord.
Make sure the power supply matches with the
requirement of air conditioner.Unstable power supply or
incorrect wiring or malfunction. Please install proper power
supply cables before using the air conditioner.
Properly connect the live wire, neutral wire and
grounding wire of power socket.
Be sure to cut off the power supply before proceeding
any work related to electricity and safety.
Precautions
WARNING
Do not put through the power before finishing installation.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
The temperature of refrigerant circuit will be high, please
keep the interconnection cable away from the copper
tube.
The appliance shall be installed in accordance with
national wiring regulations.
Installation must be performed in accordance with the
requirement of NEC and CEC by authorized personnel
only.
The air conditioner is the first class electric appliance. It
must be properly grounding with specialized grounding
device by a professional. Please make sure it is always
grounded effectively, otherwise it may cause electric shock.
The yellow-green wire in air conditioner is grounding
wire, which can't be used for other purposes.
The grounding resistance should comply with national
electric safety regulations.
The appliance must be positioned so that the plug is
accessible.
All wires of indoor unit and outdoor unit should be
connected by a professional.
If the length of power connection wire is insufficient, please
contact the supplier for a new one. Avoid extending the
wire by yourself.
Precautions
WARNING
For the air conditioner with plug, the plug should be
reachable after finishing installation.
For the air conditioner without plug, an circuit break
must be installed in the line.
If you need to relocate the air conditioner to another
place, only the qualified person can perform the work.
Otherwise, it may cause personal injury or damage.
Select a location which is out of reach for children and
far away from animals or plants.If it is unavoidable,
please add the fence for safety purpose.
The indoor unit should be installed close to the wall.
Instructions for installation and use of this product are
provided by the manufacturer.
FCC WARNING
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
Precautions
FCC STATEMENT
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received,including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions,may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and
receiver.
● Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV
technician for help.
Precautions
IC STATEMENT
This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
This equipment complies with FCC’s and IC’s RF
radiation exposure limits set forth for an uncontrolled
environment. The antenna(s) used for this transmitter
must be installed and operated to provide a separation
distance of at least 20 cm from all persons and must
not be collocated or operating in conjunction with any
other antenna or transmitter. Installers must ensure that
20cm separation distance will be maintained between
the device (excluding its handset) and users.
Cet appareil est conforme aux limites d’exposition au
rayonnement RF stipulées par la FCC et l’IC pour une
utilisation dans un environnement non contrôlé. Les
Precautions
IC STATEMENT
antennes utilisées pour cet émetteur doivent être
installées et doivent fonctionner à au moins 20 cm de
distance des utilisateurs et ne doivent pas être placées
près d’autres antennes ou émetteurs ou fonctionner
avec ceux-ci. Les installateurs doivent s’assurer qu’une
distance de 20 cm sépare l’appareil (à l’exception du
combiné) des utilisateurs.
Working temperature range
Maximum cooling
Maximum heating
Indoor side DB/WB(ć )
26.7/19.4
26.7/-
Outdoor side DB/WB(ć )
46.1/23.9
23.9/18.3
NOTICE:
● The operating temperature range (outdoor temperature) for cooling only unit is
-18 ć ~54ć ; for heat pump unit is -30 ć ~ 54ć .
Parts name
Indoor Unit
air inlet
panel
power wire
filter
horizontal louver
air outlet
remote controller
power
display tem.display
NOTICE:
Actual product may be different from above graphics, please refer to actual
products.
Buttons on remote controller
10
+/- button
Cool button
Heat button
Fan button
I FEEL button
up down swing button
Mode button
Left right swing button
13 Air button
14 X-fan button
15 Light button
14
16
12 Humidity button/Health button
13
15
ON/OFF button
10 T-ON/T-OFF button
11 Clock button
11
12
16 Sleep button
17 WIFI button
17
Introduction for icons on display screen
Operation mode
Auto mode
Cool mode
WIFI
INTELLIGENT
Dry mode
Fan mode
Set fan speed
Send signal
battery power
humidity functions
Temp.display type
Healthy mode
Set temperature
Heat mode
Up & down swing
Left & right swing
8ć heating function
child lock
I feel function
Replacing air
Set time
Turbo fan speed
HOUR ON OFF
X-FAN function
Auto quiet mode
Quiet mode
Sleep mode
Temp. display type
:Set temp.
:Indoor ambient temp.
:Outdoor ambient temp.
10
Introduction for buttons on remote controller
Note:
● After putting through the power, the air conditioner will give out a sound.
Operation indictor " " is ON (red indicator). After that, you can operate the air
conditioner by using remote controller.
● Under on status, pressing the button on the remote controller, the signal icon " "
on the display of remote controller will blink once and the air conditioner will give
out a “de” sound, which means the signal has been sent to the air conditioner.
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator " "on indoor unit’s display is ON (green indicator.
The colour is different for different models), and indoor unit will give out a sound.
+/- button
● Press "+" or " - " button once increase or decrease set temperature 0.5 ć
Holding "+" or " - " button, 2s later, set temperature on remote controller will
change quickly.On releasing button after setting is finished, temperature indicator on indoor unit will change accordingly. (Temperature can’t be adjusted under
auto mode)
● When setting TIMER , press "+" or " - " button to adjust time.
Cool button
● Press this button, unit will operate in cool mode.
Heat button
● Press this button, unit will operate in heat mode.
FAN button
Pressing this button can set fan speed circularly as: low( ) , low medium(
),
medium (
),medium high(
),high(
),super( ),auto(AUTO),quiet( ).
Note:
Auto
● Turbo function is not available under dry and auto mode.
● Automatically operate slient speed when starting sleep fuction.
● The unit operates at low speed under dry and auto dry mode. The speed can't
be adjusted.
● Under AUTO speed, air conditioner will select proper fan speed automatically
according to ambient temperature.
11
Introduction for buttons on remote controller
I FEEL button
Press this button to start I FEEL function and " " will be displayed on the remote
controller. After this function is set, the remote controller will send the detected
ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected temperature. Press this button again
to close I FEEL function and " " will disappear.
● Please put the remote controller near user when this function is set. Do not put
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.
button
● Under simple swing mode, press this button can turn on (display "
" icon ) or
turn off ( not display "
" icon) left&right swing function.
● Under OFF status, press "+" button and " " button simultaneously can switch
between simple swing mode and fixed swing mode. During switching time,
“
” icon on remote controller will flash twice.
● Under fixed-angle swing mode, press this button and the left and right swing status
will change in the sequence as below:
no display
(stops at current position)
MODE button
Press this button to select your required operation mode.
AUTO
COOL
DRY
12
FAN
HEAT
Introduction for buttons on remote controller
● When selecting auto mode, air conditioner will operate automatically according
to ambient temperature. Set temperature can’t be adjusted and will not be displayed
as well. Press "FAN" button can adjust fan speed. Press " " / " " button can
adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode.
Press "+" or "-" button to adjust set temperature. Press "FAN" button to adjust
fan speed.Press " " / " " button to adjust
fan blowing angle.
● When selecting dry mode, the air conditioner operates at low speed under dry
mode. Under dry mode, fan speed can’t be adjusted. Press " " / " " button to
adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan,Press "FAN" button
to adjust fan speed. Press " " / " " button to adjust fan blowing angle.
● When selecting heating mode, the air conditioner operates under heat mode.
Press "+" or "- " button to adjust set temperature. Press "FAN" button to adjust
fan speed. Press " " / " " button to adjust fan blowing angle. (Cooling only
unit won’t receive heating mode signal. If setting heat mode with remote controller,
press ON/OFF button can’t start up the unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30ć (61-86°F);
button
● Under simple swing mode, press this button can turn on ( display "
" icon) or
turn off ( not display "
" icon) up&down swing function.
● Under OFF status, press "+" button and " " button simultaneously can switch
between simple swing mode and fixed swing mode. During switching time,
“
” icon on remote controller will flash twice.
● Under fixed swing mode, press this button and up and down swing status will
change in the sequence as below:
no display
(horizontal louvers stops
at current position)
13
Introduction for buttons on remote controller
10
T-ON/T-OFF button
● T-ON button
“T-ON” button can set the time for timer on. After pressing this button, "
" icon
disappears and the word “ON" on remote controller blinks. Press “+” or “-”button
to adjust T-ON setting. After each pressing “+” or “-”button, T-ON setting will
increase or decrease 1min. Hold “+” or “-”button, 2s later, the time will change
quickly until reaching your required time. Press“T-ON”to confirm it. The word “ON”
will stop blinking. " " icon resumes displaying.Cancel TIMER ON: Under the
condition that T-ON is started up, press “T-ON” button to cancel it.
● T-OFF button
“T-OFF” button can set the time for timer off. After pressing this button, " " icon
disappears and the word "OFF" on remote controller blinks. Press "+" or "-" button
to adjust T-OFF setting. After each pressing "+" or "-" button, T-OFF setting
will increase or decrease 1min. Hold "+" or "-" button, 2s later, the time will change
until reaching your required time. Press“T-OFF”to confirm it. The word “ON”will
"OFF" will stop blinking. " " icon resumes displaying. Cancel T-OFF.Under the
condition that T-OFF is started up, press “T-OFF” button to cancel it.
Note:
● Under on and off status, you can set T-OFF or T-ON simultaneously.
● Before setting T-ON or T-OFF, please adjust the clock time.
● After starting up T-ON or T-OFF, set the constant circulating valid. After that,
air conditioner will be turned on or turned off according to setting time. ON/OFF
button has no effect on setting. If you don’t need this function, please use remote
controller to cancel it.
11
CLOCK button
Press this button to set clock time. " " icon on remote controller will blink.
Press "+" or "-" button within 5s to set clock time. Each pressing of "+" or "-"
button, clock time will increase or decrease 1 minute. Hold "+" or "-" button, 2s
later, time will change quickly. Release this button when reaching your required
time. Press “CLOCK”button to confirm the time. " " icon stops blinking.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operations can’t exceeds 5s. Otherwise, remote
controller will quit setting status. Operation for TIMER ON/TIMER OFF is
the same.
14
Introduction for buttons on remote controller
12
Humdity/health button
Press this button to select your required operation mode.
INTELLIGENT
INTELLIGENT
cancel
Note:there is no this function for this unit. If press this button,the main unit will click,
but it also runs under original status.
13
X-FAN button
Pressing this button in COOL or DRY mode, the icon "
" is displayed and the
indoor fan will continue operation for 2 minutes in order to dry the indoor unit even
though you have turned off the unit. After energization, X-FAN OFF is defaulted.
X-FAN is not available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.
● Having set X-FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running for about 2 min. at low speed. In this
period, press X-FAN button to stop indoor fan directly.
● Having set X-FAN function off: After turning off the unit by pressing ON/OFF
button, the complete unit will be off directly.
14
Air button
Press this button to select your required operation mode.
cancel
Note:there is no this function for this unit. If press this button,the main unit will click,
but it also runs under original status.
15
LIGHT button
Pressing this button to turn off display light on indoor unit. Press this button again
to turn on display light.
16
ƽ
SLEEP button
Pressing this button can select Sleep 1, Sleep 2,Sleep 3, Sleep 4 or cancel Sleep
circularly as below:
cancel
15
Introduction for buttons on remote controller
In Sleep 1 and Sleep 2, the air conditioner will run according to a group of presetting
temperature curves.
ƽ Sleep 3 - the sleep curve setting under DIY Sleep mode:
(1) Under Sleep 3 mode, long press "AIR" button, the remote controller will enter
the setting of personalized sleep. In this case, the timer zone of remote controller
will display "1 hr" and the set temperature zone "88" will display the corresponding
temperature of the last set sleep curve and blink (The first entering will display
according to the initial curve setting value of manufacturer);
ƽ (2) Press "+" and "-" button to adjust the corresponding temperature. After adjusting,
press "AIR" button to confirm it;
ƽ (3) At this time, the timer time on the remote controller will increase automatically by
1hr (that is "2 hr" or "3 hr" … or "8 hr"). The set temperature zone "88" will display the
corresponding temperature of the last set sleep curve and blink;
ƽ (4)Repeat step(2) and step (3) until 8-hour temperature setting is finished, then the
sleep curve is set successfully. After that, remote controller will resume displaying the
original timer time and temperature zone will resume displaying the original set
temperature.
ƽ Sleep 3 - the sleep curve inquiry under DIY Sleep mode:
User can inquire the set sleep curve according to the setting method of sleep curve.
Enter the setting of personalized sleep but do not change the temperature. Then
press "AIR" button to confirm the setting.
Note: In the above setting or inquiry procedure, if there is no button pressing within
10s, remote controller will automatically exit the sleep curve setting and resume the
HEATING button is pressed during the setting or inquiry procedure, remote controller
original display. If ON/OFF, MODE, TIMER, HUMIDIFY, SLEEP, COOLING or
will also exit the sleep curve setting.
ƽ Sleep 4 is Siesta mode. The set temperature will change automatically according to
the features of siesta.
ƽ Sleep function will be disabled if the air condition is restarted after power failure;
when sleep function is turned on, quite fan speed will be also turned on.
ƽ Sleep function can not be set in AUTO mode.
ƽ
17
Wifi button
● Press this button 3s can set wifi function on or OFF.
● At OFF status,press mode button and wifi button,can reset wifi mode parameter.
and open wifi function.
16
Function introduction for combination buttons
About X-FAN function
This function indicates that moisture on evaporator of indoor unit will be blowed after
the unit is stopped to avoid mould.
1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button
indoor fan will continue running for about 2 min. at low speed. In this period, press
X-FAN button to stop indoor fan directly.
2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button,
the complete unit will be off directly.
About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on
the LCD, the unit will be in accordance with the room temp. automatically to select the
suitable running method and to make ambient comfortable.
About lock
Press + and - buttons simultaneously to lock or unlock the keyboard. If the remote controller is locked, the icon
will be displayed on it, in which case, press any button,
the mark will flicker for three times. If the keyboard is unlocked, the mark will disappear.
About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch Ƈ and Ɖ.
17
Operation guide
1. After putting through the power, press "ON/OFF" button on remote controller to
turn on the air conditioner.
2. Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN,
HEAT.
3. Press "+" or " - " button to set your required temperature. (Temperature can’t
be adjusted under auto mode).
4. Press "FAN" button to set your required fan speed: auto, low, medium and high
speed.
5. Press "SWING" button to select fan blowing angle.
Replacement of batteries in remote controller
1. Press the back side of remote controller marked
the cover of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and
make sure the position of "+" polar and "-" polar
are correct.
3. Reinstall the cover of battery box.
Battery level will be displayed on the remote
controller.When "
" is flickering, please
replace the batteries, otherwise, remote
controller can’t operate normally.
signal sender
battery
reinstall
remove
Cover of battery box
battery level
NOTICE
● During operation, point the remote control signal sender at the receiving
window on indoor unit.
● The distance between signal sender and receiving window should be no
more than 8m, and there should be no obstacles between them.
Signal may be interfered easily in the room where there is fluorescent lamp
or wireless telephone; remote controller should be close to indoor unit during
operation.
● Replace new batteries of the same model when replacement is required.
● When you don’t use remote controller for a long time, please take out the
batteries.
● If the display on remote controller is fuzzy or there’s no display, please
replace batteries.
18
Operation of Smart Control (Smart Phone, Tablet PC)
Special Function
How to operate AC or auxiliary device with smart phone or tablet PC after matching:
First of all: before using smart connection function, please make sure your smart
phone or tablet computer uses the standard Android or iOS operating system.
Please refer to the application program for the specific version. This air conditioner
can connect 4 smart phones or tablet computers in maximum.
1. Install G-Life on your smart phone/ tablet PC
Method 1: Enter Gree official website to download http://www.gree.com/english/
downloadcenter/ihome_jsp_catid_2840.shtml
Method 2: Scan the QR code and download the application directly (If your device
is not compatible, please download the application in other ways.)
Method 3: Users of iOS system can search the application “G-Life” through
Apple’s App Store. After it is successfully installed, you will see the picture below.
Following is the example using iphone4s. (The interface of the application may vary
as it is upgraded or used in different operating systems. Please refer to actual application.)
19
Operation of Smart Control (Smart Phone, Tablet PC)
2. Turn on the AC WiFi:
Turn the AC on. First, make sure the remote controller is matched. Then, long-press
“WiFi” button on the remote controller for at least 3 seconds. If WiFi icon is shown,
it means the WiFi function is turned on.
3. Enter the WiFi setting of your phone and search for the wireless network named
gree-xxxxxxxx. Take gree-E9D1 as an example. Connect the network.
4. Input the original password 12345 to connect the network.
5. Open the application software and click “Refresh”, and then system will link with the air
conditioner automatically. Click “ ” to turn on the control function, and then clock any
position on the interface and then software will switch to the remote control interface.
20
Operation of Smart Control (Smart Phone, Tablet PC)
Attention: please change the name and key of the network during
the first setting!
6. Left-slide the bottom function bar to “Settings” and click it to enter into internet
setting interface. Click “Network Setting”, and input user name and password (the
defaulted user name and password is admin) in the “Login” dialog box to enter into
“Network Setting” to modify network name (e.g. gree-my home) and password (refer
to the attachment: safe mode and password instruction).
7. After modifying name and password, click it to return and there will be a prompt box,
and then clock “OK” to finish the modification. Meanwhile, the software will turn back to
interface of “Air-Conditioner” and the AC list will be gone.
8. Exit the application and enter your phone’s WiFi Setting. Then you will see the
network you just named “gree-my home". Click it and input the password set in
step 6 to join the network.
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Helen.Ma
Create Date                     : 2014:12:20 11:52:34+08:00
Modify Date                     : 2014:12:20 11:52:40+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:12:20 11:52:40+08:00
Creator Tool                    : PDFCreator Version 0.9.9
Format                          : application/pdf
Title                           : User Manul.pdf
Creator                         : Helen.Ma
Document ID                     : uuid:1f2f1277-91d0-46f3-a8dd-dd6dd9700f2e
Instance ID                     : uuid:b874f51c-6c23-4f26-bcc2-c1738329a4f5
Producer                        : GPL Ghostscript 8.70
Page Count                      : 25

EXIF Metadata provided by EXIF.tools