Gree Electric Appliances of Zhuhai SAA1FB1F Remote Controller User Manual User Manul

Gree Electric Appliances, Inc. of Zhuhai Remote Controller User Manul

Contents

140815007GZU_2ADAP-SAA1FB1F_User Manual-1_Rev1

Split Air Conditioner.Thank you for choosing our product.If you have lost the Owner’s Manual, please contact the local agent or visit www.gree.com or sent email to global@gree.com.cn for electronic version.For proper operation, please read and keep this manual carefully. GWH09UC-D3DNA4A/IModels:GWH12UC-D3DNA4A/IGWH18UC-D3DNA4A/I GWH09UC-D3DNA4C/IGWH12UC-D3DNA4C/IGWH18UC-D3DNA4C/I
Matching instructionsSpecialties noteMatching of remote controllerPlease do the following operation within 2m from the unit. Matching is not needed anymore once it is done. During matching, please keep the remote controller and air conditioner under standby status.When the signal of remote controller can’t be received, please match the remote controller with the unit again.This model adopts RF remote control. The remote controller shall be matched with the air conditioner before operation, otherwise the remote control will be invalid.Before operation, please read the instructions in this page carefully and then do the corresponding matching operation.NoteWhen the unit is under standby status, please get close to the air conditioner within 2m and then hold on pressing button for 3s. The remote controller and air conditioner will enter matching automatically. If matching is done, the unit will give out three sounds; if matching is failed, please get closer to the unit and arrange matching again. Humidify/Health
ContentOperation NoticesPrecautions............................................................................................................1Parts name ........................................................................................................... 9Screen Operation GuideButtons on remote controller ................................................................................10Introduction for buttons on remote controller ...................................................... 11Function introduction for combination buttons ......................................................17Operation guide ....................................................................................................18Replacement of batteries in remote controller ......................................................18Emergency operation ...........................................................................................27Operation of Smart Control (Smart Phone, Tablet PC) .......................................19MaintenanceClean and maintenance....................................................................................... 27MalfunctionMalfunction analysis ............................................................................................ 30Installation NoticeInstallation dimension diagram ............................................................................ 34Tools for installation ............................................................................................. 35Selection of installation location .......................................................................... 35Requirements for electric connection .................................................................. 36InstallationInstallation of indoor unit...................................................................................... 37 Vacuum pumping ................................................................................................. 42Leakage detection ............................................................................................... 42Check after installation ........................................................................................ 43Test and operationTest operation ...................................................................................................... 43Attachment ......................................................................... 44Pipe expanding methodConfiguration of connection pipe ....................................................................................... 46Introduction for icons on display screen ...............................................................10This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.Children should be supervised to ensure that they do not play with the appliance.Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
Explanation of SymbolsIndicates a hazardous situation that, if not avoided, willresult in death or serious injury. Indicates a hazardous situation that, if not avoided, could result in death or serious injury. Indicates a hazardous situation that, if not avoided, mayresult in minor or moderate injury. Indicates important but not hazard-related information, used to indicate risk of property damage. Indicates a hazard that would be assigned a signal word WARNING or CAUTION.
PrecautionsWARNINGDo not connect air conditioner to multi-purpose socket.This appliance can be used by children aged from 8 Operation and MaintenanceIf the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.Do not spray water on indoor unit. It may cause electricshock or malfunction.Otherwise, it may cause fire hazard.Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision.years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Do not wash the air conditioner with water to avoid electric shock.After removing the filter, do not touch fins to avoid injury.Do not use fire or hair dryer to dry the filter to avoiddeformation or fire hazard.Do disconnect power supply when cleaning air conditioner. Otherwise, it may cause electric shock..1
Do not block air outlet or air inlet. It may cause malfunction.remote controller may be broken.● Power cord is overheating or damaged.● There’s abnormal sound during operation.● Circuit break trips off frequently.● Air conditioner gives off burning smell.● Indoor unit is leaking.contact the dealer or qualified professionals for service.When turning on or turning off the unit by emergency operation switch, please press this switch with an insulating object other than metal.outlet. It may cause personal injury or damage.PrecautionsWARNINGconditioner and disconnect power immediately, and then If the air conditioner operates under abnormal conditions, it may cause malfunction, electric shock or fire hazard.Do not spill water on the remote controller, otherwise the electric shock or damage. Please contact dealer when you need to repair air conditioner. Do not repair air conditioner by yourself. It may cause objects. It may cause damage or personal injury.Do not step on top panel of outdoor unit, or put heavy When below phenomenon occurs, please turn off air Do not extend fingers or objects into air inlet or air Maintenance must be performed by qualified professionals. Otherwise, it may cause personal injury or damage.2
Do install the circuit break. If not, it may cause malfunction. of at least 3mm in all poles should be connected in fixed wiring.magnet buckle and heating buckle function, it can protectthe circuit-short and overload.power supply circuit and circuit break.PrecautionsWARNINGnote the following table.Air switch should be included Make sure the power supply matches with the requirement of air conditioner.Unstable power supply or incorrect wiring or malfunction. Please install proper power supply cables before using the air conditioner.An all-pole disconnection switch having a contact separation Must follow the electric safety regulations when installing the unit.grounding wire of power socket.Properly connect the live wire, neutral wire and any work related to electricity and safety.Be sure to cut off the power supply before proceeding Including an circuit break with suitable capacity, please Air Conditioner should be properly grounded. Incorrect Don't use unqualified power cord.grounding may cause electric shock.According to the local safety regulations, use qualified Installation must be performed by qualified professionals. Otherwise, it may cause personal injury or damage.Attachment3
Installation must be performed in accordance with the persons in order to avoid a hazard.must be properly grounding with specialized grounding device by a professional. Please make sure it is always grounded effectively, otherwise it may cause electric shock.The appliance must be positioned so that the plug is accessible.If the length of power connection wire is insufficient, please contact the supplier for a new one. Avoid extending the wire by yourself.All wires of indoor unit and outdoor unit should be connected by a professional. national wiring regulations.requirement of NEC and CEC by authorized personnel only.PrecautionsWARNINGwire, which can't be used for other purposes.The grounding resistance should comply with national electric safety regulations.The air conditioner is the first class electric appliance. It keep the interconnection cable away from the copper tube.The temperature of refrigerant circuit will be high, please the manufacturer, its service agent or similarly qualified If the supply cord is damaged, it must be replaced by The yellow-green wire in air conditioner is grounding The appliance shall be installed in accordance with Do not put through the power before finishing installation.4
The indoor unit should be installed close to the wall. reachable after finishing installation.far away from animals or plants.If it is unavoidable, please add the fence for safety purpose.PrecautionsWARNINGFCC WARNINGplace, only the qualified person can perform the work. Otherwise, it may cause personal injury or damage.If you need to relocate the air conditioner to another must be installed in the line.For the air conditioner without plug, an circuit break Select a location which is out of reach for children and For the air conditioner with plug, the plug should be 5Instructions for installation and use of this product are provided by the manufacturer. expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.WARNING: Changes or modifications to this unit not FCC STATEMENTOperation is subject to the following two conditions : This device complies with Part 15 of the FCC Rules.
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against equipment generates, uses and can radiate radio ● Reorient or relocate the receiving antenna.● Increase the separation between the equipment and receiver.● Connect the equipment into an outlet on a circuit ● Consult the dealer or an experienced radio/TV different from that to which the receiver is connected. technician for help.interference to radio communications. comply with the limits for a Class B digital device, PrecautionsFCC STATEMENTaccordance with the instructions,may cause harmful harmful interference in a residential installation. This undesired operation.frequency energy and, if not installed and used in However, there is no guarantee that interference will does cause harmful interference to radio or television correct the interference by one or more of the following measures:equipment off and on, the user is encouraged to try to not occur in a particular installation. If this equipment reception, which can be determined by turning the NOTE: This equipment has been tested and found to (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause 6
PrecautionsLe présent appareil est conforme aux CNR d'Industrie licence. L'exploitation est autorisée aux deux conditions tout brouillage radioélectrique subi, même si le undesired operation of the device.IC STATEMENTbrouillage, et (2) l'utilisateur de l'appareil doit accepter Canada applicables aux appareils radio exempts de interference, and (2) this device must accept any suivantes : (1) l'appareil ne doit pas produire de brouillage est susceptible d'en compromettre le fonctionnement.interference, including interference that may cause This device complies with Industry Canada licence-This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.Cet appareil est conforme aux limites d’exposition au rayonnement RF stipulées par la FCC et l’IC pour une utilisation dans un environnement non contrôlé. Les 7
PrecautionsWorking temperature rangeIndoor side DB/WB(ć) Outdoor side DB/WB(ć)Maximum cooling 26.7/19.4 46.1/23.9Maximum heating 26.7/- 23.9/18.3● The operating temperature range (outdoor temperature) for cooling only unit is -18 ć~54ć; for heat pump unit is -30 ć~ 54ć.NOTICE:IC STATEMENTprès d’autres antennes ou émetteurs ou fonctionner antennes utilisées pour cet émetteur doivent être installées et doivent fonctionner à au moins 20 cm de distance des utilisateurs et ne doivent pas être placées distance de 20 cm sépare l’appareil (à l’exception du combiné) des utilisateurs.avec ceux-ci. Les installateurs doivent s’assurer qu’une 8
9Parts nameIndoor Unitair inletpanelfilterpower wirehorizontal louverremote controllerair outlettem.displaypowerdisplayNOTICE:Actual product may be different from above graphics, please refer to actual products.
10Buttons on remote controllerIntroduction for icons on display screen325 61011121591714131687411ON/OFF button2+/- button3Cool button4Heat button6I FEEL button7up down swing button9Left right swing button14 X-fan button15Sleep buttonLight button1617 WIFI button11 Clock button1213Humidity button/Health buttonAir button10 T-ON/T-OFF button8Mode button5Fan buttonbattery powerSend signal8ć heating functionI feel functionSet fan speedTemp. display type:Set temp.:Outdoor ambient temp.:Indoor ambient temp.Heat modeFan modeDry modeCool modeAuto modeOperation modehumidity functionsTemp.display typeHealthy modeSet temperatureINTELLIGENTHOUR ON OFFWIFIUp & down swingLeft & right swingchild lockReplacing airQuiet modeAuto quiet modeX-FAN functionTurbo fan speedSleep modeSet time
Pressing this button can set fan speed circularly as: low( low medium( ),) ,medium ( ),medium high( ),high( ),super( ),auto(AUTO),quiet( ).AutoNote:● Under AUTO speed, air conditioner will select proper fan speed automatically according to ambient temperature.● Automatically operate slient speed when starting sleep fuction.● Turbo function is not available under dry and auto mode. ● The unit operates at low speed under dry and auto dry mode. The speed can't be adjusted. FAN button5● When setting TIMER , press "+" or " - " button to adjust time. +/- button2● Press "+" or " - " button once increase or decrease set temperature 0.5 ć Holding "+" or " - " button, 2s later, set temperature on remote controller will change quickly.On releasing button after setting is finished, temperature indica- tor on indoor unit will change accordingly. (Temperature can’t be adjusted under auto mode)Introduction for buttons on remote controllerNote:● After putting through the power, the air conditioner will give out a sound. Operation indictor " " is ON (red indicator). After that, you can operate the air conditioner by using remote controller.● Under on status, pressing the button on the remote controller, the signal icon " " on the display of remote controller will blink once and the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.ON/OFF button1Press this button can turn on or turn off the air conditioner. After turning on the airconditioner, operation indicator " "on indoor unit’s display is ON (green indicator.The colour is different for different models), and indoor unit will give out a sound.Cool button3● Press this button, unit will operate in cool mode.● Press this button, unit will operate in heat mode.Heat button411
Introduction for buttons on remote controller7 buttonno display(stops at current position)between simple swing mode and fixed swing mode. During switching time,“ ” icon on remote controller will flash twice.● Under simple swing mode, press this button can turn on (display " " icon ) or turn off ( not display " " icon) left&right swing function.● Under fixed-angle swing mode, press this button and the left and right swing status● Under OFF status, press "+" button and " " button simultaneously can switch will change in the sequence as below:I FEEL button6Press this button to start I FEEL function and " " will be displayed on the remotecontroller.After this function is set, the remote controller will send the detectedambient temperature to the controller and the unit will automatically adjust theindoor temperature according to the detected temperature. Press this button againto close I FEEL function and " " will disappear.● Please put the remote controller near user when this function is set. Do not put the remote controller near the object of high temperature or low temperature in order to avoid detecting inaccurate ambient temperature.12MODE button8Press this button to select your required operation mode.AUTO COOL FANDRY HEAT
13Introduction for buttons on remote controller● When selecting auto mode, air conditioner will operate automatically according to ambient temperature. Set temperature can’t be adjusted and will not be displayed as well. Press "FAN" button can adjust fan speed. Press " " / " " button can adjust fan blowing angle.● After selecting cool mode, air conditioner will operate under cool mode. Press "+" or "-" button to adjust set temperature. Press "FAN" button to adjust fan speed.Press " " / " " button to adjust fan blowing angle.● When selecting dry mode, the air conditioner operates at low speed under dry mode. Under dry mode, fan speed can’t be adjusted. Press " " / " " button to adjust fan blowing angle.● When selecting fan mode, the air conditioner will only blow fan,Press "FAN" button to adjust fan speed. Press " " / " " button to adjust fan blowing angle.● When selecting heating mode, the air conditioner operates under heat mode. Press "+" or "- " button to adjust set temperature. Press "FAN" button to adjust fan speed. Press " " / " " button to adjust fan blowing angle. (Cooling onlyunit won’t receive heating mode signal. If setting heat mode with remote controller,press ON/OFF button can’t start up the unit). Note:● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is depend on indoor ambient temperature).● Set temperature range from remote controller: 16~30ć(61-86°F); no display9(horizontal louvers stopsat current position) button● Under simple swing mode, press this button can turn on ( display " " icon) or turn off ( not display " " icon) up&down swing function.● Under OFF status, press "+" button and " " button simultan● Under fixed swing mode, press this button and up and down swing status willeously can switch change in the sequence as below:between simple swing mode and fixed swing mode. During switching time,“ ” icon on remote controller will flash twice.
● T-ON button “T-ON” button can set the time for timer on. After pressing this button, " " icon disappears and the word “ON" on remote controller blinks. Press “+” or “-”button to adjust T-ON setting. After each pressing “+” or “-”button, T-ON setting will increase or decrease 1min. Hold “+” or “-”button, 2s later, the time will change will stop blinking. " " icon resumes displaying.Cancel TIMER ON: Under the quickly until reaching your required time. Press“T-ON”to confirm it. The word “ON”until reaching your required time. Press“T-OFF”to confirm it. The word “ON”will condition that T-ON is started up, press “T-ON” button to cancel it. ● T-OFF button “T-OFF” button can set the time for timer off. After pressing this button, " " icon disappears and the word "OFF" on remote controller blinks. Press "+" or "-" button to adjust T-OFF setting. After each pressing "+" or "-" button, T-OFF setting will increase or decrease 1min. Hold "+" or "-" button, 2s later, the time will change "OFF" will stop blinking. " " icon resumes displaying. Cancel T-OFF.Under the condition that T-OFF is started up, press “T-OFF” button to cancel it. Note: ● Under on and off status, you can set T-OFF or T-ON simultaneously.● Before setting T-ON or T-OFF, please adjust the clock time.● After starting up T-ON or T-OFF, set the constant circulating valid. After that, air conditioner will be turned on or turned off according to setting time. ON/OFF button has no effect on setting. If you don’t need this function, please use remote controller to cancel it.10 T-ON/T-OFF button14Introduction for buttons on remote controllerPress this button to set clock time. " " icon on remote controller will blink. Press "+" or "-" button within 5s to set clock time. Each pressing of "+" or "-" button, clock time will increase or decrease 1 minute. Hold "+" or "-" button, 2s later, time will change quickly. Release this button when reaching your required time. Press “CLOCK”button to confirm the time. " " icon stops blinking.Note: ● Clock time adopts 24-hour mode.● The interval between two operations can’t exceeds 5s. Otherwise, remote controller will quit setting status. Operation for TIMER ON/TIMER OFF is the same.11 CLOCK button
SLEEP button16ƽPressing this button can select Sleep 1, Sleep 2,Sleep 3, Sleep 4 or cancel Sleep circularly as below: cancel15Introduction for buttons on remote controller12Humdity/health buttonPress this button to select your required operation mode.Note:there is no this function for this unit. If press this button,the main unit will click,but it also runs under original status.INTELLIGENT INTELLIGENTPress this button to select your required operation mode.Note:there is no this function for this unit. If press this button,the main unit will click,but it also runs under original status.cancelcancelX-FAN button13Pressing this button in COOL or DRY mode, the icon " " is displayed and the indoor fan will continue operation for 2 minutes in order to dry the indoor unit eventhough you have turned off the unit. After energization, X-FAN OFF is defaulted.X-FAN is not available in AUTO, FAN or HEAT mode.This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould.● Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will continue running for about 2 min. at low speed. In this period, press X-FAN button to stop indoor fan directly.● Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.14Air buttonLIGHT button15Pressing this button to turn off display light on indoor unit. Press this button againto turn on display light.
ƽtemperature curves. In Sleep 1 and Sleep 2, the air conditioner will run according to a group of presetting ƽSleep 3 - the sleep curve setting under DIY Sleep mode:(1) Under Sleep 3 mode, long press "AIR" button, the remote controller will enter the setting of personalized sleep. In this case, the timer zone of remote controller will display "1 hr" and the set temperature zone "88" will display the corresponding temperature of the last set sleep curve and blink (The first entering will display according to the initial curve setting value of manufacturer); ƽSleep 3 - the sleep curve inquiry under DIY Sleep mode:User can inquire the set sleep curve according to the setting method of sleep curve. Enter the setting of personalized sleep but do not change the temperature. Then ƽSleep 4 is Siesta mode. The set temperature will change automatically according to ƽSleep function will be disabled if the air condition is restarted after power failure; ƽSleep function can not be set in AUTO mode.when sleep function is turned on, quite fan speed will be also turned on.the features of siesta. press "AIR" button to confirm the setting.Note: In the above setting or inquiry procedure, if there is no button pressing within 10s, remote controller will automatically exit the sleep curve setting and resume the original display. If ON/OFF, MODE, TIMER, HUMIDIFY, SLEEP, COOLING orHEATING button is pressed during the setting or inquiry procedure, remote controller will also exit the sleep curve setting.ƽ(2) Press "+" and "-" button to adjust the corresponding temperature. After adjusting, press "AIR" button to confirm it;ƽ(3) At this time, the timer time on the remote controller will increase automatically by 1hr (that is "2 hr" or "3 hr" … or "8 hr"). The set temperature zone "88" will display the corresponding temperature of the last set sleep curve and blink;ƽ(4)Repeat step(2) and step (3) until 8-hour temperature setting is finished, then the sleep curve is set successfully. After that, remote controller will resume displaying the original timer time and temperature zone will resume displaying the original set temperature.16Introduction for buttons on remote controllerWifi button17●Press this button 3s can set wifi function on or OFF.●At OFF status,press mode button and wifi button,can reset wifi mode parameter.and open wifi function.
Function introduction for combination buttonsAbout X-FAN functionThis function indicates that moisture on evaporator of indoor unit will be blowed afterthe unit is stopped to avoid mould.indoor fan will continue running for about 2 min. at low speed. In this period, pressX-FAN button to stop indoor fan directly.1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF buttonthe complete unit will be off directly.2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button,About AUTO RUNWhen AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in accordance with the room temp. automatically to select thesuitable running method and to make ambient comfortable.About lockPress + and - buttons simultaneously to lock or unlock the keyboard. If the remote co-ntroller is locked, the icon will be displayed on it, in which case, press any button, the mark will flicker for three times. If the keyboard is unlocked, the mark will disappear.About switch between Fahrenheit and CentigradeUnder status of unit off, press MODE and - buttons simultaneously to switch Ƈ and Ɖ.17
1. After putting through the power, press "ON/OFF" button on remote controller to turn on the air conditioner.2. HEAT.3. Press "+" or " - " button to set your required temperature. (Temperature can’t be adjusted under auto mode).4. Press "FAN" button to set your required fan speed: auto, low, medium and high speed. Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN, 5. Press "SWING" button to select fan blowing angle.Operation guideReplacement of batteries in remote controller1. Press the back side of remote controller marked the cover of battery box along the arrow direction.2. Replace two 7# (AAA 1.5V) dry batteries, and make sure the position of "+" polar and "-" polar are correct.3. Reinstall the cover of battery box.signal sender batteryCover of battery boxremovereinstallNOTICE● During operation, point the remote control signal sender at the receiving window on indoor unit.● The distance between signal sender and receiving window should be no more than 8m, and there should be no obstacles between them.Signal may be interfered easily in the room where there is fluorescent lamp or wireless telephone; remote controller should be close to indoor unit during operation.● Replace new batteries of the same model when replacement is required.● When you don’t use remote controller for a long time, please take out the batteries.● If the display on remote controller is fuzzy or there’s no display, please replace batteries.Battery level will be displayed on the remote replace the batteries, otherwise, remote controller can’t operate normally. controller.When " " is flickering, pleasebattery level18
Operation of Smart Control (Smart Phone, Tablet PC)How to operate AC or auxiliary device with smart phone or tablet PC after matching:First of all: before using smart connection function, please make sure your smartphone or tablet computer uses the standard Android or iOS operating system. Please refer to the application program for the specific version. This air conditioner can connect 4 smart phones or tablet computers in maximum.1. Install G-Life on your smart phone/ tablet PCMethod 1: Enter Gree official website to download http://www.gree.com/english/Method 2: Scan the QR code and download the application directly (If your device is not compatible, please download the application in other ways.)Method 3: Users of iOS system can search the application “G-Life” through Apple’s App Store. After it is successfully installed, you will see the picture below. Following is the example using iphone4s. (The interface of the application may vary as it is upgraded or used in different operating systems. Please refer to actual application.)downloadcenter/ihome_jsp_catid_2840.shtmlSpecial Function19
Operation of Smart Control (Smart Phone, Tablet PC)2. Turn on the AC WiFi:Turn the AC on. First, make sure the remote controller is matched. Then, long-press“WiFi” button on the remote controller for at least 3 seconds. If WiFi icon is shown, it means the WiFi function is turned on.3. Enter the WiFi setting of your phone and search for the wireless network named gree-xxxxxxxx. Take gree-E9D1 as an example. Connect the network.4. Input the original password 12345 to connect the network.5. Open the application software and click “Refresh”, and then system will link with the air conditioner automatically. Click “ ” to turn on the control function, and then clock any position on the interface and then software will switch to the remote control interface.20
Operation of Smart Control (Smart Phone, Tablet PC)Attention: please change the name and key of the network during the first setting!8. Exit the application and enter your phone’s WiFi Setting. Then you will see the network you just named “gree-my home". Click it and input the password set in step 6 to join the network.7. After modifying name and password, click it to return and there will be a prompt box, and then clock “OK” to finish the modification. Meanwhile, the software will turn back to interface of “Air-Conditioner” and the AC list will be gone.216. Left-slide the bottom function bar to “Settings” and click it to enter into internet setting interface. Click “Network Setting”, and input user name and password (the defaulted user name and password is admin) in the “Login” dialog box to enter into “Network Setting” to modify network name (e.g. gree-my home) and password (refer to the attachment: safe mode and password instruction).

Navigation menu