Greenheck Fan Centrifugal Ceiling And Cabinet Exhaust Fans Csp Users Manual 44754
CSP to the manual 454a095d-823b-43ea-8dff-9488b828101d
2015-02-09
: Greenheck-Fan Greenheck-Fan-Centrifugal-Ceiling-And-Cabinet-Exhaust-Fans-Csp-Users-Manual-562521 greenheck-fan-centrifugal-ceiling-and-cabinet-exhaust-fans-csp-users-manual-562521 greenheck-fan pdf
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
Centrifugal Ceiling and Cabinet Exhaust Fans Models SP and CSP Making a Sound Difference with Silent Solutions November 2006 Ceiling and Cabinet Exhaust Fans Great things come in small packages, as do our ceiling fans (Model SP) and cabinet fans (Model CSP). Be assured when you buy any Greenheck product, you are getting a quality product at a competitive price. In fact, we guarantee our ceiling and cabinet exhaust fans with a three (3) year warranty. We offer the most comprehensive ceiling and cabinet exhaust fan line in the commercial market. We are your market leader! Benefits Benefits • Low sound • Compact size • Competitive price • Broadest performance selections in the industry Go Inside the Numbers • Greenheck has been providing solutions for over 50 years. • Preferred 3 to 1 over the competition. • Number 1 in product quality and reliability. • Number 1 in customer satisfaction and after-sale customer service support. • More than 400 times a day a new ceiling fan is put into service. • 3 year warranty. Greenheck Fan Corporation certifies that the SP models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. Greenheck Fan Corporation certifies that the CSP models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. SP fans fans are designed for ceiling SP mounted applications. CSP fans are designed for inline remote mounted applications. Models SP and CSP are listed electric fans (UL/cUL 507). Ceiling Exhaust Fans are also UL Listed for above bathtub/shower with GFCI branch protected circuit. File no. E33599. Leading Edge Technical Support When you need extensive product and IOM (Installation, Operation and Maintenance Manual) information, our products are supported by the industry’s best product literature, electronic media, and Computer Aided Product Selection (CAPS) program. You’ll also find this information on our website at www.greenheck.com You can always count on personal service and expertise from our national and international representative organization. To locate your nearest Greenheck representative, call 715-359-6171 or visit our website at 2 Model Number Code ® SP - A 50 FL Light Options: L - Fan/Light (Incandescent) Combination FL - Fan/Light (Fluorescent) Combination Nominal cfm at 0.10 inches static pressure Level of Construction: A - Premium unit; lowest sound, insulated housing B - Deluxe unit; low sound, low profile C - Standard unit; lowest profile, inexpensive Model: SP - Silent Partner CSP - Cabinet Silent Partner Table of Contents SP-A . . . . . . . . . . . . . . . . . . . . . . . . 4 SP-A Light . . . . . . . . . . . . . . . . . 5 SP-A Performance . . . . . . .16 CSP-A . . . . . . . . . . . . . . . . . . . . .10 CSP-A Performance . . . . .18 SP-B . . . . . . . . . . . . . . . . . . . . . . . . 6 SP-B Light . . . . . . . . . . . . . . . . . 7 SP-B Performance . . . . . . .17 CSP-B . . . . . . . . . . . . . . . . . . . . .11 CSP-B Performance . . . . .19 SP-C . . . . . . . . . . . . . . . . . . . . . . . . 8 SP-C Performance. . . . . . .17 Sound Data . . . . . . . . . . . . . . . . 9 Accessories . . . . . . . . . 12 - 15 Specifications . . . . . . . . . . . .19 Quick Delivery and Quick Build Programs Order from hundreds of SP and CSP configurations, accessories, and thousands of other products that can ship to your job site in less than 24 hours. We have strategically located warehouses across the United States and internationally to fill your request at a moments notice. Speed up your process even more by ordering your units at QD Online at www.greenheck.com/qd www.greenheck.com/qd. For other sizes and configurations where rapid response time is required, our Quick Build (QB) Program manufactures and ships your custom products in one, three, five, or ten days. 3 SP ® PREMIUM CEILING FAN A The SP-A is a Premium Ceiling Fan. It is in the top of its class when it comes to meeting sound requirements. • Profile as low as 101/2 inches. • Sound levels as low as 0.7 sones. 2 5 • Air volume as high as 1,607 cfm. 7 • UL Listed for above bathtub/ shower with GFCI branch protected circuit. 8 1 4 6 SP-A SP-A FEATURES 1 Spring Loaded Aluminum Backdraft Damper - Eliminates rattling or unwanted backdrafts. 2 Outlet - Both square and round outlets are field rotatable from horizontal to vertical discharge. 3 11 12 3 10 Power Assembly - Removes quickly for maintenance or conversion from horizontal to vertical discharge. 4 External Electrical Access - Eliminates removing motor pack, saving installation time. 5 Electrical Knockouts (horizontal or vertical) Eliminates drilling holes. 9 Grille Options Designer - Standard Grille Decorative - Lighted and non-lighted Aluminum - White enamel finish Stainless Steel - Polished stainless steel finish Round Duct Connection Standard - Sizes A50, A70, and A90. 6 Acoustic Insulation - Absorbs sound. 7 Disconnect - Servicing is quick and safe. 8 Electrical Junction Box - Large for easy wiring. Exclusive Electrical Wiring Feature 9 Attractive Designer Grille - Concealed attachment screws securely fasten grille to housing for quiet, rattle free operation. Greenheck SP-A models are the only fans of this type with an electrical access cover located on the housing exterior. This feature permits external wiring without removing the power assembly, saving installation time and cost. 10 Mounting Brackets - Fully adjustable for multiple installation conditions. 11 Housing - Embossed galvanized steel for rigidity. 12 Motors - All motors are compatible for use with speed controls and have thermal overload protection. Both domestic and international applications available. • • 4 Round Duct Adapter Optional - Sizes A110 through A510 Vertical Vertical Discharge Discharge Photo shows exhaust outlet duct installed in the optional vertical position. The power assembly must be rotated to match the duct adapter position. (See SP-A IOM) 50 cycle, 220v, and 240v options. Double Double Wide Wide Fans Fans (See page 16 for availability) Available for applications requiring 700 cfm or greater. Double wide fans have two double width forward curved wheels, which are housed in separate scrolls, and driven by a single motor. 60 cycle, 115v, 208v, 220v, 230v, and 277v options. (See CAPS for availability) SP ® PREMIUM CEILING FAN A Light Options Greenheck’s fan/light combination includes a prismatic or frosted lens, and compact fluorescent or incandescent lamps. Our unique patent pending light box is manufactured with a reflective material to increase the light given off by either type of lamp. UL Listed for above bathtub/ showers with GFCI branch protected circuit. Available on Sizes 50 - 125 Prismatic Lens Frosted Lens The prismatic lens design provides approximately 25% more light than a traditional frosted lens. The lens may be easily removed to replace light bulbs. (Patent Pending) Compact Fluorescent Lamps (CFL) • • • • • The frosted lens option is a traditional design which lets approximately 80% of light through the lens. The lens may be easily removed to replace light bulbs. Incandescent Lamps Quick start bulbs Reflective light box (Patent Pending) Produce 90% less heat Lower energy costs Two 13 watt CFL bulbs equals 100 watts of incandescent light (included) A major advantage of using CFL’s is to save money, as shown in the table to the right. This table assumes the light is on for six hours per day and that the electric rate is 10 cents per kilowatt-hour. This study was based over a 4½ year period. • • • • Dimmable Reflective light box (Patent Pending) Low first-cost light One bulb provides up to 100 watts of light (by others) 27 Watt Compact Fluorescent Cost of Lamps 100 Watt Incandescent $14.00 $0.50 1,642.5 days (4.5 years) 167 days $5.91 $21.90 0 10 Total Cost $40.60 $103.55 Savings Over Lamp Life $62.95 $0.00 Lamp Life Annual Energy Cost Lamps Replaced in 4.5 years Source: U.S. Department of Energy, August 2001 Office of Energy Efficiency and Renewable Energy Ceiling Radiation Damper SP-A Fan National Fire Protection Association (NFPA) Standard 90A requires openings in fire rated ceiling/floor assemblies be protected by appropriately rated ceiling radiation dampers. As a result, many local codes require fans installed in fire rated ceilings must also be protected by dampers which are insulated against both heat and flame. Hanging Vibration Isolation Ceiling Radiation Damper Fire Rated Ceiling 3" AxB Grille *CRD is approximately 1/4 inch larger than housing dimension. (See SP-A IOM) The Greenheck SP-A ceiling radiation damper is UL Classified, rated at three to four hours fire resistance, and is available on all SP-A fans and fan/light combinations. This design saves space by allowing the damper to mount 5 directly beneath the fan. SP ® DELUXE CEILING FAN The SP-B is a Deluxe Ceiling Fan compact enough for almost any application. If quiet is what you are after, this fan will accommodate your needs. • Profile as low as 6 15/16 inches. • Sound levels as low as 1.7 sones. • Air volume as high as 197 cfm. • UL Listed for above bathtub/shower with GFCI branch protected circuit. B 9 1 2 3 10 7 SP-B SP-B FEATURES 1 Aluminum Backdraft Damper Prevents unwanted backdrafts. 2 Round Standard Outlet (4 or 6 in.) - Versatile for quick, easy connections. 3 Power Assembly - Removes quickly for maintenance. 4 Electrical Access (vertical) - Eliminates drilling holes. 5 Disconnect - Servicing is quick and safe. 6 Electrical Junction Box - Large for easy wiring. 7 Attractive Designer Grille - Concealed attachment screws securely fasten grille to housing for quiet, rattle free operation. 8 Mounting Brackets - Fully adjustable for multiple installation types. 9 Housing - Embossed galvanized steel for rigidity and low profile for height restricted areas. 10 Motors - All motors are compatible for use with speed controls and have thermal overload protection. Both domestic and international applications available. • 50 cycle, 220v, and 240v options. (See page 17 for availability) • 60 cycle, 115v, 208v, 220v, 230v, and 277v options. (See CAPS for availability) 8 6 5 4 Grille Options Designer - Standard Grille Decorative - Lighted and non-lighted Aluminum - White enamel finish Stainless Steel - Polished stainless steel finish Round Duct Connection 4 in. - B50, B70, and B80 6 in. - B90, B110, B150, and B200 Contractor 4 Paks Save installation time and labor by installing the housing first, then installing the internal components after the sheetrocking, plastering, and finishing is done. Housings are packaged in one box, power assembly and grille are packaged in another box. Components are shipped to coincide with the phase of your project. 6 SP ® DELUXE CEILING FAN B Light Light Options Options Greenheck’s new fan/light combination includes a prismatic or frosted lens, and compact fluorescent or incandescent lamps. Our unique patent pending light box is manufactured with a reflective material to increase the light given off by either lamp. UL Listed for above bathtub/showers with GFCI branch protected circuit. Available Available on on Sizes Sizes 50 50 -- 150 150 Prismatic Lens Frosted Lens The prismatic lens design provides approximately 25% more light than a traditional frosted lens. The lens may be easily removed to replace light bulbs. (Patent Pending) Compact Fluorescent Lamps (CFL) • • • • • The frosted lens option is a traditional design which lets approximately 80% of light through the lens. The lens may be easily removed to replace light bulbs. Incandescent Lamps Quick start bulbs Reflective light box (Patent Pending) Produce 90% less heat Lower energy costs Two 13 watt CFL bulbs equals 100 watts of incandescent light (included) • • • • Dimmable Reflective light box (Patent Pending) Low first-cost light One bulb provides up to 100 watts of light (by others) 27 Watt Compact Fluorescent A major advantage of using CFL’s is to save money, as shown in the table to the right. This table assumes the light is on for six hours per day and that the electric rate is 10 cents per kilowatt-hour. This study was based over a 4½ year period. Cost of Lamps 100 Watt Incandescent $14.00 $0.50 1,642.5 days (4.5 years) 167 days $5.91 $21.90 0 10 Total Cost $40.60 $103.55 Savings Over Lamp Life $62.95 $0.00 Lamp Life Annual Energy Cost Lamps Replaced in 4.5 years Source: U.S. Department of Energy, August 2001 Office of Energy Efficiency and Renewable Energy Ceiling Radiation Damper SP-B Fan National Fire Protection Association (NFPA) Standard 90A requires openings in fire rated ceiling/floor assemblies be protected by appropriately rated ceiling radiation dampers. As a result, many local codes require fans installed in fire rated ceilings must also be protected by dampers which are insulated *CRD is approximately 1/4 inch larger against both heat and flame. than housing dimension. (See SP-B IOM) The Greenheck SP-B ceiling radiation damper is UL Classified, rated at three to four hours fire resistance, and is available on all SP-B fans and fan/light combinations. This design saves space by allowing the damper to mount directly beneath the fan. Hanging Vibration Isolation Ceiling Radiation Damper Fire Rated Ceiling 3" AxB Grille 7 SP ® STANDARD CEILING FAN The SP-C is our economy ceiling fan designed for light commercial applications. • Profile as low as 3 5/8 inches. • Sound levels as low as 2.9 sones. • Air volume as high as 52 cfm. • UL Listed for above bathtub/shower with GFCI branch protected circuit. 1 2 7 6 3 4 8 SP-C FEATURES 1 Plastic Backdraft Damper - Prevents unwanted backdrafts. 2 Round Outlet - 3 inch diameter allows quick easy connections. 3 Power Assembly - Removes quickly for maintenance. 4 Disconnect - Servicing is quick and safe. 5 Polymeric Grille - Quickly snaps into place. 6 Mounting Brackets - Adjustable for several installation types. 7 Housing - Galvanized steel for rigidity and low profile for height restricted areas. 8 Motors - Compatible for use with speed controls and has thermal overload protection. • 8 60 cycle, 115v C 5 Things to know, when sound is critical Sound Data The sound data shown in this catalog has been presented to aid the system designer in selecting a fan which will meet the desired sound criteria. Sone levels have been included on the performance pages to provide a means of quickly evaluating the relative loudness of a fan selection. What is a sone? Sones are an internationally recognized unit of loudness. In practical terms, the loudness of one sone is equivalent to the sound of a quiet refrigerator measured from five feet away in an acoustically average room. A sone is a single number rating, which indicates the inlet noise derived from the eight audible octave bands. Sones are a linear measurement of sound level. For example, a sound level of 10 sones is twice as loud as 5 sones. ® SUGGESTED LIMITS FOR ROOM LOUDNESS Sones 1.3-4 1.7-5 2-6 DBA 32-48 36-51 38-54 2.5-8 41-58 3-9 44-60 4-2 48-64 5-15 51-67 7-21 56-72 Private homes (rural and suburban) Conference rooms Hotel rooms, libraries, movie theatres, executive offices Schools and classrooms, hospital wards and operating rooms Court rooms, museums, apartment houses, private homes (urban) Restaurants, lobbies, general open offices, banks Corridors and halls, cocktail lounges, washrooms and toilets Hotel kitchens and laundries, supermarkets Reprinted from AMCA Publication 302 (Application of Sone Ratings for Non Ducted Air Moving Devices, with room—sone— dBA correlations) with the written permission from the AMCA International, Inc., 30 West University Drive, Arlington Heights, IL 60004-1893. NOTE: Values above are for room loudness and are not sound ratings. Room loudness is the resulting level in a conditioned space after the acoustical qualities of the room have been accounted for. What is the difference in a AMCA Sone vs. HVI Sones? In general, the AMCA (Air Movement and Control Association) sone value is focused on commercial markets, whereas the HVI (Home Ventilating Institute) sone value is focused on residential markets. Both calculate their sone data from the same raw test data (eight octave bands), however an AMCA sone applies a hemispherical correction factor to the sound power and rounds to the nearest 0.1, whereas HVI applies a spherical correction factor to the sound power and rounds to the nearest 0.1 under 1.5 sones and to the nearest 0.5, 1.5 sones and greater. There are no conversions from one sone to the other, each must be calculated. In every instance the same fan will have a lower HVI calculated sone rating than an AMCA calculated sone rating. Can radiated noise increase the sound levels? Radiated noise from fan housings can cause unacceptable sound levels, on any brand of fan. The size of these fans allows them to be placed in areas where this noise will be transmitted to the conditioned space through walls or ceilings. Where possible, cabinet fans should be located in remote parts of the ventilation system. When should a SP or CSP fan be used? Model SP and CSP fans are designed for the lowest possible sound levels. Forward curved wheels, insulated housings, and vibration isolators between the motor and housing contribute to quiet, efficient operation. Applied and installed as recommended, SP and CSP sound levels will fall well within the ranges shown in the chart above. For applications where sound levels are critical, a remote mounted CSP with ductboard is recommended. Placement of SP/CSP fans should take into account the desired sound level at the location of the listener. Their compact size allows the system designer greater flexibility in locating these fans for lowest sound levels. In critical sound areas, insulated Fiberglass ductwork, flexible duct connections, or placing the fan in a remote section of the ductwork (away from Remote mounted the critical area) offers the best means of meeting Model CSP with vibration isolators and desired sound levels. insulated ductwork provides quietest When room sound levels are critical, such as in installation. executive offices, conference rooms, hospital operating rooms, and school study areas, a CSP fan is the best choice. Shown here is a comparison of SP and CSP fans of the same size, with equal performance in typical installations. The CSP shows lower sone values. Model CFM SP-A410 405 CSP-A410 426 WG 1/8 1/8 FRPM 1000 1000 *Sone value with insulated inlet duct. Sones 3.7 2.1* Model SP mounted directly overhead may be too loud for sound critical applications. 9 CSP ® PREMIUM INLINE FAN A The CSP-A is a Premium Inline Fan. It outperforms the competition and is preferred by specifying engineers. • • • • Profile as low as 10 1/2 inches. Sound levels as low as 0.8 sones. Air volume as high as 3,778 cfm. UL/cUL Listed. 6 2 8 5 CSP-A FEATURES 1 2 3 Power Assembly - Removes quickly for maintenance or conversion from horizontal to vertical discharge. External Electrical Access - Eliminates removing motor pack, saving installation time. 5 Electrical Knockouts (horizontal or vertical) Eliminates drilling holes. 6 Acoustic Insulation - Absorbs sound. 7 Disconnect - Servicing is quick and safe. 8 Electrical Junction Box - Large for easy wiring. 9 Access Panel - Gain easy access to internal components once installed. 12 3 11 10 Mounting Brackets - Fully adjustable for multiple installation conditions. 11 Housing - Embossed galvanized steel for rigidity. 12 Motors - All motors are compatible for use with speed controls and have thermal overload protection. Both domestic and international applications available (not shown). • 50 cycle, 220v, and 240v options. (See page 18 for availability) • 10 60 cycle, 115v, 208v, 220v, 230v, and 277v options. (See CAPS for availability) 4 1 Outlet - Both square and round outlets are field rotatable from horizontal to vertical discharge. 4 10 7 Spring Loaded Aluminum Backdraft Damper - Eliminates rattling or unwanted backdrafts. 9 Exclusive Electrical Wiring Feature Greenheck CSP-A models are the only fans of this type with an electrical access cover located on the housing exterior. This feature permits external wiring without removing the power assembly, saving installation time and cost. Vertical Discharge Discharge Vertical Photo shows exhaust outlet duct installed in the optional vertical position. The power assembly must be rotated to match the duct adapter position. (See CSP-A IOM) Double Wide Wide Fans Fans Double Available for applications requiring 700 cfm or greater. Double wide fans have two double width forward curved wheels, which are housed in separate scrolls, and driven by a single motor. CSP ® DELUXE INLINE FAN B The CSP-B is a compact Deluxe Inline Fan. It is designed to fit in small remote quarters. • Profiles as low as 6 15/16 inches. • Sound levels as low as 2.0 sones. • Air volume as high as 186 cfm. • UL/cUL Listed. CSP-B FEATURES 1 2 2 1 5 4 9 Aluminum Backdraft Damper Prevents unwanted backdrafts. Round Standard Outlet (4 or 6 in.) Versatile for quick, easy connections. 3 6 3 Power Assembly - Removes quickly for maintenance. 4 10 8 7 Electrical Access (vertical) - Eliminates drilling holes. 5 Disconnect - Servicing is quick and safe. 6 Electrical Junction Box - Large for easy wiring. 7 Access Panel - Gain easy access to internal components once installed. 8 Mounting Brackets - Fully adjustable for multiple installation types. 9 Housing - Embossed galvanized steel for rigidity and low profile for height restricted areas. 10 Motors - All motors are compatible for use with speed controls and have thermal overload protection. Both domestic and international applications available. • 50 cycle, 220v and 240v options. (See page 19 availability) • 60 cycle, 115v, 208v, 220v, 230v, and 277v options. (See CAPS for availability) 11 Accessories ® Speed Controls Speed controls may be used on Model SP and CSP fans for manual adjustment of the fan’s performance (for final system balancing) or to control the fan’s output in confined spaces, such as conference or meeting rooms. The fan can be adjusted to 60% of design airflow with a speed control. This reduction in airflow and fan speed is also accompanied by a reduction in noise level. Solid state speed controls are available for a range of applications up to 15 amps. Speed controls can be used to operate more than one fan if the combined total amperage of the fans does not exceed the control rating. Model 5WSSC - For use w/ shaded pole and PSC motors. Available shipped loose or mounted internal or external. • Rated for 115 - 127v, 5 Amp • UL Listed • Require a 2x4 handy box Model 5W240 - For use w/ shaded pole and PSC motors. Available shipped loose or mounted internal or external. • Rated for 220 - 240v, 5 Amp • UL Listed • Requires 2x4 handy box Model 5W277 - For use w/ shaded pole and PSC motors. Available shipped loose or mounted internal or external. • Rated for 277v, 5 Amp • UL Listed • Requires 2x4 handy box Model 8WSSC - For use w/ shaded pole and PSC motors. Available shipped loose or mounted internal or external. • Rated for 220 - 240v, 8 Amp • UL Listed • Requires 2x4 handy box FULL VOLTAGE SWITCHED FULL VOLTAGE RED Dotted line indicates for use with 10W switch only. BLACK H WHITE Model 10WSSC - For use w/ shaded pole and PSC motors. Available shipped loose or mounted internal or external. • Rated for 115 - 127v, 10 Amp • UL Listed • Requires 4x4 handy box SPEED CONTROL VARIABLE VOLTAGE AUX DEVICE 120 VAC FAN Model 15WSSC - For use w/ shaded pole and PSC motors. Available shipped loose or mounted internal or external. • Rated for 115 - 127v, 15 Amp • UL Listed • Requires 4x4 handy box N Switches Switches may be used on Models SP and CSP fans to enable manual control of your fan or fan/light combination. There are several options to fit your application. NEMA 1- Single pole rocker switch assembly. • Rated for, 115v, 15 Amp, 1/2 Hp • UL Listed EXTERNAL JUMPER Model MS-16- Single pole rocker switch assembly with cover and pilot light. • Rated for, 115v, 15 Amp, 1/2 Hp • UL Listed NEMA 1 - Two pole rocker switch assembly. LOAD LOAD • Rated for, 220/230/240/277v, 20 Amp, 2 Hp • UL Listed • Requires a 2x4 handy box. Time Delay Switch Time delay switches save energy by automatically turning off equipment. They may be used with Models SP and CSP fans and fan/light combinations, for extended operating time of fan. Time delay switches act in the same manner as a standard switch, however, there is a delay of 1 to 60 minutes after the it has been turned off. Model GTD - Single switch controls both fan and light. Available shipped loose. • Silent Operation • UL Listed (500 Watt Max) LIGHT 115 VOLT AC (HOT) 60 CYCLE BLACK • Rated for 115v • Requires 2x4 handy box (7.5 Amps Max) FAN MOTOR RED (NEUTRAL) WHITE 12 BLUE Accessories ® Motion Detectors Motion detectors may be used with Models SP and CSP fans, or fan and light combinations. Motion detectors use a passive infrared motion detector that will automatically turn on the fan when a change in temperature is sensed. They have a viewing area of 180 degrees, however they must be placed in the line-of-sight. They also have an adjustable time delay shutoff setting of 1 to 20 minutes. Grille Motion Detectors are available on models up through size SP-A390 and SP-B200. • Rated for 115v • UL Listed Black White Red Motion Sensor Hot Black Hot Green Model MDW For use on fan or lights. Available shipped loose. • Rated for 115v • UL Listed • Requires 2x4 handy box Neutral Gnd. Red Neutral Fan Motor and/or Light Load (12.5 Amps Max.) Black Green White Ground Grille Mount Wall Mount Transformers Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. All transformers are shipped loose. Model T-2.0 - UL Listed • Rated for 230/277v to 115, 2 Amps 277 V SUPPLY SWITCH BOX Model T-4.3 - UL Listed • Rated for 230/277v to 115, 4.3 Amps BLK BLK BLK H1 H2 H3 277V TO 115V TRANS. 750 VA X1 RED Model T-6.5 - UL Listed • Rated for 230/277v to 115, 6.5 Amps X2 RED SWITCH Model T-8.6 - UL Listed • Rated for 230/277v to 115, 8.6 Amps 115 V MOTOR Ceiling Radiation Dampers The Greenheck SP-A and SP-B ceiling radiation dampers are UL Classified, rated at three to four hours fire resistance, and is available on all SP-A and SP-B fans and fan/light combinations. This design saves space by allowing the damper to mount directly beneath the fan. SP Model CRD Length Width Height A50 - A190 310 13 1/2 11 1/8 3 B50 - B200 320 14 3/8 12 1/4 3 A200 - A390 A410 - A510 350 18 7/16 14 15/16 3 A710 - A780 3/16 1 12 /4 3 A - 700 700 24 A900 - A1550 360 24 3/16 14 15/16 3 All dimensions shown in inches. Add an “L” to all CRD models if fan & light combo is used. Filters Filter Model SP Model SP-A50 - A190 SP-B50 - B200, A200 - A390 SP-A410 - A510 SP-A710 - A780 SP-A900 - A155 F-200 F-200 *Metal Grille F-210 F-220 Filter Area (ft2) .620 .785 NA F-250 1.319 NA F-260 1.797 Designer Grill All dimensions shown in inches. *Aluminium or Stainless Steel Grille. Resistance in w.c. Fans used in most applications, even where air is not excessively dirty, will collect airborne dirt on wheels and motors over time. Accumulations of dirt on the fan wheel will sharply reduce performance and cause imbalance. Dirt buildup on the motor can cause it to overheat. All of these conditions will FILTER LOSS CHART shorten the life of the fan. To help reduce this accumulation, washable aluminum .24 mesh filters are available to trap dirt before it enters the fan. These filters should .22 be regularly cleaned to maintain performance. The Filter Loss Chart shows the .20 effect the filter will have on performance. To determine the added resistance, .18 divide the desired cfm by the filter area (ft2). This will give FPM. Use this with .16 the filter loss chart to get the added resistance. In addition to reducing dirt .14 accumulations on the motor and wheel, filters also reduce sound levels. .12 .10 .08 .06 Mesh Filter .04 .02 SP Grille .00 0 1 2 3 4 5 6 7 Velocity FPM x 100 8 9 13 Wall Discharge Accessories ® G B D F B A C E E C A D E Model WC (Round Connection) Model WC (Square/Rectangular Connections) Hooded Wall Cap Hooded Wall Cap • Aluminum construction - aluminum finish • For outside wall applications • Built in birdscreen (not available on WC-4) and damper • Steel construction with black enamel finish • For outside wall applications • Built in birdscreen and damper For use Model A with sizes WC-4 C50, B50-B80 61/2 B90-B200 A50-A190 WC-6 WC-8 8 A200-A510 11 B 6 C 4 D 23/4 E 5 8 6 41/8 5 8 51/8 3.5 11 For use Model A B C D E F with sizes WC-10x3 50-290 51/2 123/4 31/2 101/4 111/8 41/4 WC-8x8 200-510 101/4 101/4 81/4 81/4 81/4 63/4 WC-18x8 700-1550 101/4 201/4 81/4 181/4 181/4 63/4 All dimensions shown in inches. All dimensions shown in inches. A C B E B D A Model BVE Model WL Brick Vent Wall Louvered Discharge • Designed for installation in masonry walls • Anodized aluminum construction • Built in aluminum mesh insect screen • Anodized aluminum grille • Built in damper • Not recommended for exterior applications exposed to severe weather conditions. An external wall louver is recommended for such applications. Model WL-10x3 WL-18x6 C For use with sizes A B 50-290 12 5 1/4 390-1550 19 3 /4 8 C 10 18 Model BVE808 BVE128 BVE157 D E 7 3 /4 3 1/2 9 6 For use with sizes A 50-290 8 1/8 390-510 12 700-1050 15 5/8 B 7 3/4 7 3/4 7 3/4 C 4 4 4 All dimensions shown in inches. All dimensions shown in inches. ACCESSORY PRESSURE DROPS Model RDC Round Duct Connector Model RDC-6 RDC-8 For use with sizes A110-A190 A200-A510 Dia. 6 8 Model TR 6x4 Transition Duct Reducer • Reduces duct from 6 to 4 inches. • Galvanized steel construction Model For use with sizes TR 6x4 B50-B200 A50-A90 A110-A190* * Used in conjunction with RDC-6. 14 30 20 WL-18x6 RJ-10x10 10 CFM x 100 • Replaces the standard square discharge ductAll dimensions shown in inches. connector and damper RDC-8 • Uses existing mounting holes RDC-6 • Galvanized steel construction • RDC-6 includes a damper • RDC-8 does not include a damper The chart below can be used with all of the discharge accessories shown on these two pages. Specific pressure drop values for these accessories must be included in total system calculations for proper fan selection. BVE-157 WC-18x8 9 8 7 BVE-128 WC-8x8 WC-8 6 WC-10x3 WC-6 RJ-6x9 EL-10x3 WL-10x3 BVE-808 RFC-7 RCC-7 5 4 3 4 in. dia 6 in. dia. 2 1.01 6.25 in. .02 .03 .04 .05 .06 .07 .08 .09.10 .2 .3 Pressure Drop in Inches of Water Gauge Above accessories tested with 4 feet of inlet duct .4 .5 .6 G 5 5 5 Roof Discharge Accessories ® D C RJ-4 and RJ-6x9 D RJ-10x10 1 11 /8 C 91/4 31/2 E 10 A E B Model RJ B A Pitched Roof Cap • Steel construction with black enamel finish • Integral flashing flange • Built in birdscreen and damper For use with sizes Model RJ-4 A 11 B 91/4 11 1 / 2 51 /8 Model EL - 10x3 C 81/4 D 5 5/16 Elbow Discharge with Grille E Throat 41/2 4 in. Dia. C50, B50-B80 B90-B200 RJ-6x9 18 3/4 141/4 141/2 10 3/8 61/2 A50-A390 RJ-10x10 A410-A1050 181/2 27 1/2 15 3/4 235/8 91/2 • • • • 6x9 10x10 Designed for installation under roof eaves Painted steel louvered grille Built in damper For SP/CSP sizes 50-290 All dimensions shown in inches. Flat Roof Caps B B D Dia. B B C D 11/2 in. Dia. A A C D Dia. 13/4 in. C C D Dia. A A Model RCC-7 Model GRS Model RFC-7 Model GRSF Curb Cap Curb Cap Flashing Flange Flashing Flange • Weathertight aluminum construction • Integral birdscreen • Built in curb cap • Requires roof curb • All aluminum exterior construction • Galvanized steel internal supports • Integral birdscreen • Built in curb cap • Requires roof curb • Weathertight aluminum construction • Integral birdscreen • Built in flashing flange • All aluminum exterior construction • Galvanized steel internal supports • Integral birdscreen • Built in flashing flange RCC-7 50-390 15 12 10 63/8 Throat Dia. 7 GRS-10 410-710 19 201/2 61/4 3 101/4 GRSF-10 410-710 23 201/2 61/4 3 101/4 GRS-12 780-1050 22 29 77/8 31/4 121/4 GRSF-12 780-1050 26 29 77/8 31/4 121/4 33/4 165/16 GRSF-16 1410-2150 30 29 83/4 33/4 165/16 41/4 205/16 GRSF-20 34 351/2 91/4 41/4 205/16 Model For use with sizes A B C D GRS-16 1410-2150 26 29 83/4 GRS-20 3600 30 351/2 91/4 For use with sizes A B C D RFC-7 50-390 18 12 10 63/8 Throat Dia. 7 Model All dimensions shown in inches. All dimensions shown in inches. Hanging Vibration Isolators Vibration isolator kits are available for suspended installations. Kits include all hardware necessary to mount one unit, with the exception of 10-32 threaded rod to be supplied by others. Fan mounting brackets include prepunched mounting holes for ease of installation. 3600 A B 10-32 hanging support rod by others Unit Size B50-B200 A50-A190 A200-A390 A410, A510 A710, A780 A700 A900-A1050 A1410-A1550 A1750, A2150 A3600 A B 41/2 51/2 6 3/4 155/8 14 5/8 15 1/2 91/4 19 5/8 51/2 25 1/8 9 1/4 25 3/8 9 1/4 9 1/4 363/4 485/8 All dimensions shown in inches. 15 SP ® PREMIUM CEILING FAN A Dimensional Data C D E Standard Grille 131/4 10 5/8 115/8 6 DIA. 147/8 x 131/4 15 1/4 sq. 12 131/4 10 5/8 101/2 8 147/8 131/4 15 1/4 sq. 17 200, 250, 290, 390 14 117/8 111/4 8 8 147/8 x 131/4 15 1/4 sq. 24 410, 510 18 143/8 141/2 8 8 193/8 x 163/8 - 31 115/8 191/2 8 251/8 x 131/2 - 34 141/2 193/8 x 163/8 - 34 25 x 163/8 - 56 Model A 50, 70, 90 110, 125, 190 B 235/8 115/8 700 710, 780 18 900, 1050, 1410, 1550 143/8 233/4 143/8 10 6 8 141/2 183/4 8 x B Decorative Unit Grille Wt. Outlet connection width is 1 inch - Mounting bracket width is 1½ inch. For complete dimensional information, see CAPS submittal drawings. All dimensions are in inches. A E C D B A E C D Performance Data Model RPM Amps Watts HVI 1 Sones 2,3,5 SP-A50 700 0.31 18 0.7 850 0.27 20 0.8 900 0.34 29 1.0 950 0.58 49 0.8 1100 0.62 53 1.2 1400 1.30 113 2.0 900 0.43 48 2.0 1000 0.77 83 2.0 1050 0.72 81 2.5 1350 1.34 135 4.5 1000 1.74 121 3.0 1070 3.30 224 4.5 1100 3.20 350 5.5 1080 4.40 285 6.0 1600 3.30 348 8.5 950 4.00 285 4.5 1095 6.30 420 6.0 1450 7.40 786 9.5 1610 8.60 818 10.0 2,3,5 SP-A70 2,3,5 SP-A90 2,3,4,5,6 SP-A110 2,3,5,6 SP-A125 3,4,5,6 SP-A190 3,5 SP-A200 3,5 SP-A250 3,4,5 SP-A290 3,4,5 SP-A390 3 SP-A410 3,4 SP-A510 3 SP-A700 3 SP-A710 3,4 SP-A780 3 SP-A900 3,4 SP-A1050 3 SP-A1410 3,4 SP-A1550 1 HVI sones at 0.1 wg 2 Available with light CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones 0.000 76 0.7 83 1.1 99 1.1 119 1.3 135 1.4 216 3.2 247 2.0 272 2.9 315 3.2 410 5.4 443 4.1 557 6.0 757 6.1 752 7.4 812 10.2 955 5.2 1125 7.2 1455 11.6 1607 12.4 0.100 51 1.0 70 1.1 88 1.4 110 1.2 123 1.7 197 2.8 225 2.3 251 3.0 293 3.3 395 5.4 413 3.8 512 5.7 729 6.1 714 7.2 782 10.2 907 5.7 1059 7.0 1414 11.6 1568 12.1 CFM/Static Pressure in inches of WG 0.125 0.250 0.375 0.500 0.625 47 30 1.1 1.8 66 42 1.4 2.2 84 61 25 1.4 1.7 1.9 106 88 1.2 1.6 121 104 1.8 1.9 192 167 133 2.9 3.1 3.4 220 196 172 142 105 2.4 3.0 3.5 4.1 4.6 246 227 210 185 157 3.0 3.4 4.4 4.6 4.9 287 257 231 207 175 3.3 3.6 3.9 4.1 4.5 391 368 345 325 307 5.4 5.7 6.0 6.3 6.4 405 351 305 3.7 3.7 4.3 501 439 392 325 5.6 5.5 5.4 4.7 723 700 679 649 613 6.1 6.3 6.7 7.1 7.3 701 653 588 485 320 7.2 7.0 6.8 6.7 6.7 775 741 704 665 625 10.2 9.9 9.5 9.5 9.4 896 841 773 701 5.8 6.1 6.2 6.2 1043 964 885 796 662 6.9 6.8 6.6 6.5 6.5 1404 1353 1307 1262 1218 11.7 11.6 11.5 11.6 11.6 1558 1506 1449 1407 1369 12.1 12.0 11.9 12.8 14.1 3 Available with CRD - Ceiling Radiation Damper 4 Available with 50 Hz motors (See CAPS for performance) 0.750 1.000 67 4.5 119 5.2 124 5.5 279 6.7 560 7.5 396 7.7 581 9.4 1174 11.6 1323 15.9 5 UL Listed for use above tubs. 6 Available with 277 volt motor. Performance certified is for Model SP exhaust for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA Standard 301. Values are for installation type B: free inlet fan sone levels. 16 SP ® DELUXE CEILING FAN B Dimensional Data Model A B *C 50, 70, & 80 137/ 8 111/ 2 137/ 8 111/ 2 90, 110, 150, 200 Designer Grille D E 615/ 16 4 3/ 4 715/ 16 6 11/ 4 147/8 x 131/4 147/8 x 131/4 Decorative Grille 15 1/4 Unit Wt. sq. 9 15 1/4 sq. 10 B A E D C *Add 1½ inches to C dimension for incandescent light. Mounting bracket width is 1½ inch For complete dimensional information, see CAPS submittal drawings. All dimensions are in inches. Performance Data Model RPM AMPS Watts HVI 1 Sones 2,3,5 SP-B50 625 0.50 38 1.4 675 0.53 45 1.4 900 0.60 54 2.5 700 0.65 50 2.0 SP-B110 950 1.14 80 1.5 1.70 129 2.5 2.20 173 4.0 2,3,5 SP-B70 2,3,5 SP-B80 2,3,4,5 SP-B90 2,3,4,5,6 2,3,4,5,6 SP-B150 1050 3,4,5,6 SP-B200 1100 1 HVI sones at 0.1 wg 2 Available with light CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones 0.000 67 1.7 77 1.7 87 2.9 102 1.9 133 2.0 160 3.0 197 4.4 0.100 53 1.9 70 1.9 80 2.9 92 2.6 114 2.1 156 3.3 195 4.6 0.125 51 1.9 68 1.9 78 3.0 88 2.7 110 2.2 155 3.3 194 4.7 CFM/Static Pressure in inches of WG 0.250 0.375 0.500 0.625 0.750 1.000 40 29 2.6 3.5 57 49 39 2.4 3.1 3.6 68 61 54 44 30 3.2 3.6 4.3 5.5 5.6 75 59 45 30 3.0 3.6 4.1 4.9 97 95 94 91 85 50 2.4 2.7 2.8 3.6 4.4 5.4 154 152 149 147 138 92 3.7 4.3 4.5 5.0 5.3 5.8 191 187 184 181 166 128 5.1 5.6 5.8 6.0 6.3 6.6 5 UL Listed for use above tubs. 6 Available with 277 volt motor. 3 Available with CRD - Ceiling Radiation Damper 4 Available with 50 Hz motors (See CAPS for performance) Performance certified is for Model SP exhaust for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA Standard 301. Values are for installation type B: free inlet fan sone levels. SP ® STANDARD CEILING FAN Dimensional Data Model 50 A B 71/ 2 71/ 2 C D E F Grille Wt. 35/ 8 3 1 5/ 8 1/ 2 91/4 x 9 5 For complete dimensional information, see CAPS submittal drawings. All dimensions are in inches. B C A D E C F Performance Data Model RPM SP-C50 1680 AMPS Watts 0.80 46 CFM/Static Pressure in inches of WG 0.00 0.100 0.125 0.250 0.375 0.500 CFM 52 49 48 46 43 37 Sones 2.9 3.6 3.6 3.9 4.2 4.8 0.625 29 6.3 Performance certified is for Model SP exhaust for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA Standard 301. Values are for installation type B: free inlet fan sone levels. 17 CSP ® PREMIUM INLINE FAN Dimensional Data A B Model A B C D E F G Wt. 110, 125, 190 131/4 105/8 101/2 8 6 12 91/4 16 200,250, 290, 390 14 117/8 111/4 8 8 127/8 10 23 410, 510 18 143/8 141/2 8 8 167/8 131/4 36 700 235/8 115/8 115/8 191/2 8 225/8 101/2 34 141/2 8 167/8 131/4 36 710, 780 18 143/8 900, 1050, 1410, 1550 233/4 143/8 141/2 183/4 8 225/8 131/4 59 1750, 2150 35 143/4 143/4 28 6 323/4 13 68 3600 451/2 161/2 161/2 40 11 431/4 145/8 122 10 Inlet and outlet connections widths are 1 inch - Mounting bracket width is 1½ inch For complete dimensional information, see CAPS submittal drawings. All dimensions are in inches. A E G D C F et In l F C G E B D A Performance Data Model RPM AMPS Watts 4,6 CSP-A110 950 0.62 51 1100 0.63 55 CSP-A190 1400 1.10 100 CSP-A200 900 0.43 48 CSP-A250 1000 0.79 83 CSP-A290 1050 0.71 80 CSP-A390 1350 1.33 144 CSP-A410 1000 1.87 139 CSP-A510 1070 3.11 217 CSP-A700 1100 3.20 350 CSP-A710 1080 4.40 325 CSP-A780 1600 3.77 405 CSP-A900 950 4.87 328 CSP-A1050 1095 6.65 455 CSP-A1410 1450 7.80 822 CSP-A1550 1610 8.32 830 CSP-A1750 1130 6.60 550 CSP-A2150 1100 7.80 735 CSP-A3600 1100 7.10 1330 6 CSP-A125 4,6 4 4 4 4 CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones 0.000 124 1.1 138 1.4 215 2.3 254 0.8 266 1.3 318 1.6 412 2.8 447 2.2 545 3.1 766 2.6 737 3.2 813 3.8 908 1.9 1182 3.5 1584 4.2 1672 5.8 1842 6.4 2249 6.0 3778 6.4 4 Units available with 50 Hz motors (See CAPS for performance) 0.100 112 1.1 126 1.4 202 2.0 230 0.7 246 1.5 299 1.7 400 2.7 411 2.1 514 2.9 755 2.5 698 3.3 783 3.6 852 2.0 1110 3.2 1543 4.0 1617 5.4 1767 6.0 2175 5.8 3653 6.1 CFM/Static Pressure in inches of WG 0.125 0.250 0.375 0.500 110 102 77 1.1 1.3 1.3 124 113 91 1.3 1.4 1.7 198 180 159 121 2.2 2.7 2.9 3.0 225 203 177 145 0.8 1.3 1.5 1.9 241 221 205 187 1.5 2.3 3.3 3.4 292 265 248 229 1.8 2.6 3.3 4.0 397 382 363 339 2.8 3.2 3.7 4.7 403 364 316 217 2.2 2.5 2.7 2.7 506 464 405 324 2.8 2.8 2.7 3.1 752 739 726 702 2.4 2.4 2.5 2.6 688 635 566 474 3.2 3.3 2.7 2.5 776 741 707 671 3.6 3.5 3.4 3.5 840 782 714 631 2.0 2.3 2.6 2.9 1093 1013 922 832 3.1 3.1 3.4 3.4 1533 1483 1439 1395 4.0 4.1 4.2 4.3 1604 1542 1484 1427 5.3 5.4 5.4 5.1 1749 1619 1463 1283 6.0 5.5 5.3 4.7 2156 2044 1900 1701 5.8 5.2 5.0 4.6 3622 3460 3280 3091 6.1 5.7 5.4 5.1 0.625 0.750 109 2.2 165 3.2 201 3.7 324 5.5 70 2.1 132 3.0 144 3.4 309 6.5 678 2.7 334 2.7 637 3.6 635 3.0 418 4.9 603 3.8 527 4.3 1293 4.6 1306 5.2 771 3.8 1114 3.4 2551 4.7 1181 5.0 1171 5.8 743 3.4 1345 4.5 1367 5.1 1032 4.1 1424 3.8 2844 4.9 1.000 1750 4.3 6 Available with 277 volt motor. Performance certified is for Model CSP inline for installation type D: Ducted inlet, Ducted outlet. Performance ratings include the effects of a backdraft damper. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5m) from the test inlet duct in a hemispherical free field calculated per AMCA Standard 301. Values are for installation type D: Ducted inlet fan sone levels. Ratings do not include the effects of duct end correction. Ratings are based on 10 ft. of insulated duct. The AMCA Certified Ratings Seal applies to air performance only. 18 CSP ® DELUXE INLINE FAN Dimensional Data Model A B D dia. B C D E F G Wt. Inlet F xG 110, 150, 200 137/ 8 111/ 2 715/ 16 6 11/ 4 101/ 4 31/ 4 101/ 4 C E Outlet connection width is 1 inch - Mounting bracket width is 1½ inch For complete dimensional information, see CAPS submittal drawings. All dimensions are in inches. A B Performance Data CFM/Static Pressure in inches of WG Model RPM AMPS Watts 4,6 CSP-B110 950 1.14 80 1050 1.70 129 1100 2.20 173 4,6 CSP-B150 4,6 CSP-B200 0.000 0.100 0.125 0.250 0.375 0.500 0.625 0.750 103 2.0 151 2.5 186 3.4 100 2.0 149 2.7 184 3.6 99 2.1 149 2.7 183 3.7 98 2.3 148 2.9 182 4.0 97 2.6 147 3.1 180 4.1 96 2.7 145 3.4 178 4.1 93 3.1 142 3.6 175 4.3 86 3.3 134 3.9 169 4.5 CFM Sones CFM Sones CFM Sones 4 Units available with 50 Hz motors (See CAPS for performance) 6 Available with 277 volt motor. Performance certified is for Model CSP inline for installation type D: Ducted inlet, Ducted outlet. Performance ratings include the effects of a backdraft damper. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5m) from the test inlet duct in a hemispherical free field calculated per AMCA Standard 301. Values are for installation type D: Ducted inlet fan sone levels. Ratings do not include the effects of duct end correction. Ratings are based on 10 ft. of insulated duct. The AMCA Certified Ratings Seal applies to air performance only. Typical Typical Specifications Specifications Model SP-C50 Ceiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of steel. The plastic duct collar shall be a tapered sleeve for ease of connection to 3 and 4 inch round ductwork and shall include a backdraft damper. The grille shall be constructed of non-yellowing high impact polystyrene and attached to the housing with torsion springs. The wheels shall be constructed of high strength polymer. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type. All fans shall bear the AMCA Certified Ratings Seal for sound and air performance. Model SP-C50 shall be UL Listed. Fans shall be Model SP-C50 as supplied by Greenheck Fan Corporation, Schofield, Wisconsin. Models SP-B50, B70, B80, B90, B110, B150, and B200 Ceiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of steel. The steel duct collar shall be 4 inch in diameter on the B50, B70, and B80 and 6 inch in diameter on the B90, B150, and B200 to accept 4 inch and 6 inch round ductwork and shall include a backdraft damper. The designer grille shall be constructed of non-yellowing high impact polystyrene and attached to the housing with hidden attachment screws. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. All fans shall bear the AMCA Certified Ratings Seal for sound and air performance and shall be UL/cUL Listed. Ceiling or wall mount fans shall be Model SP-B50, B70, B80, B90, B110, B150 or B200 as manufactured by Greenheck Fan Corporation, Schofield, Wisconsin. Models SP-A50 thru A1550 Ceiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy gauge galvanized steel. The housing interior shall be lined with 1/2 inch acoustical insulation. The outlet duct collar shall include an aluminum backdraft damper on all SP-A sizes and shall be spring loaded on size SP-A110 and larger. Outlet shall be adaptable for horizontal or vertical discharge. The designer grille for sizes SP-A50 through SP-A390 shall be constructed of high impact polystyrene and for sizes SP-A410 through SP-A1550, the grille shall be constructed of aluminum. Grilles shall be non-yellowing. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type. The motor shall be mounted on vibration isolators. The fan wheel(s) shall be of the forward curved centrifugal type and dynamically balanced. All fans shall bear the AMCA Certified Ratings Seal for sound and air performance and shall be UL/cUL Listed. Ceiling or wall mount fans shall be Model SP as manufactured by Greenheck Fan Corporation, Schofield, Wisconsin. Models CSP-B110, B150, and B200 Duct mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of steel. The steel duct collar shall be 6 inch in diameter to accept 6 inch round ductwork and shall include a backdraft damper. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type. The motor shall mounted on vibration isolators. The fan Wheel shall be of the forward curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. All fans shall bear the AMCA Certified Ratings Seal for air performance and shall be UL/cUL Listed. Ceiling or wall mount fans shall be Model CSP-B110, B150 or B200 as manufactured by Greenheck Fan Corporation, Schofield, Wisconsin. Models CSP-A110 thru A3600 Duct mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy gauge galvanized steel. The housing interior shall be lined with 1/2 inch acoustical insulation. The outlet duct collar shall include an aluminum backdraft damper and shall be adaptable for horizontal or vertical discharge. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type. The motor shall be mounted on vibration isolators. The fan wheel(s) shall be of the forward curved centrifugal type and dynamically balanced. All fans shall bear the AMCA Certified Ratings Seal for air performance and shall be UL/cUL Listed. Ceiling or wall mount fans shall be Model CSP as manufactured by Greenheck Fan Corporation, Schofield, Wisconsin. 19 Ceiling Fan Solutions Ceiling Fans Ceiling Fans w/ Light Ceiling Fans w/ CRD Ceiling Fans w/ Light & CRD SP-A110 SP-A110 SP-A390 SP-A125 SP-A50 SP-A70 SP-A90 SP-A90 SP-B50 SP-B90 SP-B200 SP-B80 Our Warranty Greenheck Fan Corporation warrants its SP/CSP products to be free of any defect in material or workmanship for a period of three (3) years from the date of purchase. In the event of such a defect during the warranty period, Greenheck Fan Corporation agrees, at its option, to either repair or replace the defective product free of charge. This warranty runs to the original purchaser of such SP/CSP products for a period of three (3) years from the date of purchase. Any product repaired or replaced under this warranty will, itself, be warranted only for the remainder of the warranty period of the original product being repaired or replaced. All light bulbs are excluded under this limited warranty. Greenheck Fan Corporation is not responsible for any removal, installation, or transportation cost. For full SP/CSP warranty information visit www.greenheck.com. As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice. P.O. Box 410 • Schofield, WI 54476-0410 • Phone (715) 359-6171 • greenheck.com Catalog SP CSP Rev 5 November 2006 SP Copyright © 2006 Greenheck Fan Corp.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 for Macintosh Modify Date : 2006:12:02 11:07:26-06:00 Creator Tool : Adobe InDesign CS2 (4.0.4) Create Date : 2006:12:02 11:07:26-06:00 Format : application/pdf Creator : dt_1 Title : 44754.indd Document ID : uuid:e42c0fe0-8227-11db-8762-000d93c9683e Instance ID : uuid:e42c1436-8227-11db-8762-000d93c9683e Page Count : 20 Author : dt_1EXIF Metadata provided by EXIF.tools