Group Sense Mobile Tech B203 Wireless POS Handheld Terminal User Manual
Group Sense Mobile-Tech Limited Wireless POS Handheld Terminal
Contents
- 1. user manual
- 2. User Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2561445 |
| Application ID | BLNNZGENL/XHVTLXLcwQ7Q== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 51.8kB (647482 bits) |
| Date Submitted | 2015-03-20 00:00:00 |
| Date Available | 2015-03-20 00:00:00 |
| Creation Date | 2015-03-09 15:33:48 |
| Producing Software | Adobe Acrobat Pro 9.3.2 |
| Document Lastmod | 2015-03-16 15:29:48 |
| Document Title | User Manual |
| Document Creator | Adobe Acrobat Pro 9.3.2 |
DT-08 User Guide Copyright ................................................................................................. 2 Disclaimer................................................................................................ 2 Regulatory Information........................................................................... 3 Safety Information................................................................................... 6 Getting Started......................................................................................... 7 Device Overview................................................................................. 7 Charging the Device............................................................................ 8 LED Status Description..................................................................... 10 Powering the Device On and Off....................................................... 11 Suspending the Device..................................................................... 11 Using the Device................................................................................... 12 Viewing System Information.............................................................. 12 Using Wi-Fi........................................................................................ 12 Using Bluetooth................................................................................. 12 Using NFC......................................................................................... 13 Adjusting Volume..............................................................................13 Adjusting Display Settings................................................................. 13 Adjusting Sleep Control Settings...................................................... 13 Hidding Screen & Display Items........................................................14 Changing Battery Charging Policy.....................................................14 Changing Language.......................................................................... 14 Adjusting Date & Time....................................................................... 14 Performing System Backup............................................................... 15 Performing System Restore.............................................................. 16 Resetting the Device......................................................................... 16 Contents Contents Regulatory Information Copyright© 2015 Group Sense Mobile-Tech Limited. All rights reserved. No part of this document may be reproduced, distributed, translated, or stored in any form without the prior written permission of Group Sense Mobile-Tech Limited. All brands and product names mentioned herein may be trademarks or registered trademarks of their respective owners.Products specifications are subject to change without prior notice. FCC & IC Statements Disclaimer This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: The contents of this document are provided as is. Group Sense Mobile-Tech Limited makes no representations or warranties with respect to the contents herein and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Group Sense Mobile-Tech Limited reserves the right to revise this document at any time without prior notice. This equipment complies with Part 15 of the FCC Rules (FCC ID: VRI-B203). Operation is subjected to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Regulatory Information Copyright Copyright Any change or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment may not ensure compliance with FCC RF exposure guidelines. Radiation Exposure Statement This device has been tested and found to comply with the following EU Directives: This device is designed, tested, and manufactured to comply with the limits for exposure to RF energy set by international regulatory agencies. The exposure standard for wireless devices employs a unit of measurement known as the specific absorption rate, or SAR. • R&TTE Directive (1999/5/EC) • EMC Directive (2004/108/EC) • Low Voltage Directive (2006/95/EC) The assessment of compliance of the device was performed according to the following European standards: • EMC: EN 301 489-1 /-3/-17 • Health: EN 50566 / EN62209-2 / EN 62479 • Safety: EN 60950-1 • Radio: EN 300 328 / EN301 893 / EN 300 440 / EN 300 330 Hereby, Group Sense Mobile-Tech Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Use Restrictions: This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range. The SAR limit set by the FCC is 1.6W/kg, and 2.0W/kg by the Council of the European Union. The device was tested against these SAR limits for typical body-worn operations specified by these agencies. The highest SAR values when tested for use on the body during product certification are 0.481W/kg and 0.173W/kg under the FCC and European Union standards. Regulatory Information Regulatory Information CE Statement To maintain compliance with RF exposure requirements, use accessories that maintain at least a 1.0cm separation distance between the user’s body and the back of the device.The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with the FCC and European Union RF exposure requirements, and should be avoided. Please read the following information carefully before using the device for the first time, and keep this User Guide in a safe place for future reference. ■■ Always treat the device with care and keep it in a clean and dust-free environment. ■■ Do not expose the device to extremely hot, cold or humid environment. The operation temperature is from –10°C to 50°C. ■■ Do not use the device in wet or rainy conditions. ■■ Do not charge the device in extremely hot (> °C) or cold conditions (< 0°C). ■■ Do not attempt to disassemble or modify the device including the charger. ■■ Do not operate the device when your hands are wet. ■■ Do not insert foreign objects into the openings of the device. ■■ Use only the adaptor and battery approved for the device. ■■ The adaptor shall be installed near the device and shall be easily accessible. ■■ Do not use the adaptor if the power cord or plug is damaged. ■■ Install the cradle on a flat and stable surface. ■■ Do not disassemble, crush or puncture the battery. ■■ Getting Started Getting Started Safety Information Safety Information Device Overview No. Item Description Power LED Power status indicator Charging LED Charging status indicator WLAN LED WLAN status indicator Touch screen LCD with capacitive touch screen NFC Reader Scanning area for NFC tags Do not expose the battery to high temperatures. Charging plates ■■ Do not let battery terminals touch other metal objects that could lead to short-circuit of the battery. Contact plates for charging through the cradle Power key Press and hold to turn device on or off ■■ Do not dispose of the battery in fire or water. Speaker Mono speaker ■■ Dispose of used battery properly according to local laws and regulations. I/O port cover Remove the cover to access the MicroSD card connector and Micro-USB connector. ■■ The device shall only be connected to a USB interface of version 2.0 or higher. The connection to so called power USB is prohibited. 10 Memory card slot MicroSD card connector 11 USB connector Micro-USB connector Charging with the Single Slot Charger Charging with the Multi-slot Cradle 1. Unfasten the power cable cover screw with a screwdriver, and remove the cover. To charge the device with the multi-slot charging cradle: 2. Connect the AC/DC adaptor to the power connector of the charging cradle. 3. Tighten the power cable cover screw to hold the cable in position. 1. Connect the AC/DC adaptor to the power connector of the charging cradle. 2. Plug the AC/DC adaptor into a suitable power socket. The cradle power LED will turn green when power is supplied to the cradle. 3. Insert the device to the charging slot. The device charging LED will flash orange while charging, and turn solid orange when fully charged. Getting Started Getting Started Charging the Device 4. Plug the AC/DC adaptor into a suitable power socket. The cradle power LED will turn green when power is supplied to the cradle. 5. Insert the device to the charging slot. The device charging LED will flash orange while charging, and turn solid orange when fully Powering the Device On and Off Power LED Powering on the Device LED colour Description Green Device On Off Device Off Charging LED LED colour Description Flashing orange Charging Solid Orange Fully Charged Solid Red Battery low Off No Charging Press and hold the Power key for 2 seconds to power on the device. Powering off the Device Press and hold the Power key for 2 seconds, and follow the screen instructions to power off the device. Getting Started Getting Started LED Status Desription Suspending the Device If the device is on, press the Power key once to suspend the device (i.e. entering sleep mode), saving battery power. To resume operation from sleep mode, press the Power key or click the touch screen. WLAN LED 10 LED colour Description Flashing blue slowly WLAN connected Flashing blue quickly WLAN not connected Off Wi-Fi turned off 11 Using NFC Viewing System Information To turn on the NFC feature: 1. Select Application drawer > Settings > About tablet. 2. Scroll to view Model number, Android version, Kernel version, and Build number. 3. Click Status to view Serial number, Battery status, Battery level, IP address, Wi-Fi MAC address, Bluetooth address, and Up time. Using Wi-Fi To connect to a Wi-Fi network: 1. Select Application drawer > Settings > Wi-Fi. 2. Slide the Wi-Fi On/Off switch to the ON position. 3. Click Wi-Fi, and then select a network listed 4. Input the password when prompted. 5. Select the Lock Single Network checkbox to lock the device to the selected network. 6. Select Show advanced options to enter static IP settings/ Proxy settings if needed. 7. Click Connect. 12 1. Select Application drawer > Settings > More. 2. Select the NFC checkbox to turn on NFC. Note: Position the tag within 2mm of the NFC reader area to ensure successful scans. Adjusting Volume 1. Select Application drawer > Settings > Sound > Volumes. 2. Drag the slide bar to adjust the volume. Using the Device Using the Device Using the Device Adjusting Display Settings Adjusting Brightness 1. Select Application drawer > Settings > Display > Brightness. 2. Drag the slide bar to adjust the backlight. Adjusting Sleep Mode Setting To change the screen setting in sleep mode: 1. Using Bluetooth Select Application drawer > Settings > Display > Sleep mode setting. 2. Select Sleep or Screen dim to trun off or dim screen To connect to a Bluetooth device: 1. Select Application drawer > Settings > Bluetooth. 2. Slide the Bluetooth On/Off switch to the ON position. Ensure the other Bluetooth device is set to discovery mode within range. 3. Click Bluetoot, and select the required device under AVAILABLE DEVICES. Click SEARCH FOR DEVICES if it does not appear in the list. 4. Input PIN when prompted, and then click OK. 5. Input the same PIN on the selected device if prompted. 6. Upon completing the pairing, the selected device is displayed under PAIRED DEVICES. Adjusting Sleep Mode Timeout 1. Select Application drawer > Settings > Display > Sleep. 2. Select the idle period before entering sleep mode. Adjusting Sleep Control Settings To enable the sleep control options: 1. Select Application drawer > Settings > Display > Sleep control. 2. Check the checkbox to enable the below sleep control options, and then click OK to exit. • Touch screen to turn on device: Click the screen to exit sleep mode. 13 Turn to sleep when put in to drawer: Enter sleep mode upon returning to the charging drawer. Performing System Backup • Turn to sleep when put in to cradle: Enter sleep mode upon returning to the charging cradle. To perform system backup: Hiding Screen & Display Items To configure the screen display options (e.g. hide system bar, virtual buttons) in Admin mode and User mode: 1. Select Application drawer > Settings > Display > Admin mode hide configuration / User mode hide configuration. 2. Check the checkbox to enable the display options, and then click OK to exit. Changing Battery Charging Policy To adjust the charging trigger level: 1. Select Application drawer > System Backup. 2. Select the Backup button. 3. Edit the Backup path if needed. This is the folder name of the backup image. 4. Select Internal storage or SD card from the Backup Location drop down menu. OS: Backup OS only. DATA: Backup installed applications, settings, and data. OS+DATA: Backup OS, installed applications, settings, and data. 5. Select a backup data option from Backup selection drop down menu. 6. To restore the back up image on the current device only, select the Need to match serial no. checkbox. 1. Select Application drawer > Settings > Battery. 2. Select Smart charging > Smart charging settings. 3. Select the checkbox to enable smart charging. 7. Select Start, and then click OK when prompted. 4. Drag the slide bar to adjust the charging trigger level, and then click OK. 8. The device reboots automatically upon completing the backup. Note: Changing Language 1. Select Application drawer > Settings > Language & input 2. Select Language. 3. Select a language Using the Device Using the Device • • Close all active programs before performing backup or restore. • The backup image folders are grouped in a folder named backup. Adjusting Date & Time 14 1. Select Application drawer > Settings > Date & time. 2. To set the date and time manually, adjust Set date, Set time, and Select time zone accordingly. 15 Using the Device Performing System Restore To restore the stystem from a backup image: 1. Select Application drawer > System Backup 2. Select the Restore button. 3. Select the backup image location from Backup Loaction drop down menu. 4. Select the backup image file from the Restore content menu. 5. Select Start, and then click OK when prompted. 6. The device reboots automatically upon completing the restore Note: • The backup image folder must be placed in the backup folder. • When backing up only the data, the image shoulf be restored on the same firmware version. Restoring on a different firmware version might create instability or corruption. Resetting the Device Soft Reset Soft reset shuts down and reboots the device. It preserves installed applications, settings, and saved data. To perform a soft reset, press and hold the power key for 8 seconds. Clean Reset Clean reset restores the system to factory default by erasing all installed applications, settings and data To perform a clean reset 1. Select Application drawer > Settings > Backup & reset. 2. Select Factory data reset. Note: Clean reset will not erase the data in the internal SD card partition. To erase the internal SD card contents, select Application drawer > Settings > Storage > Erase device storage. 16 Copyright© 2015 Group Sense Mobile-Tech Limited. All rights reserved. http://www.gsml.com.hk The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types DT-08 (FCC ID: VRI-B203) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.684 W/kg. . This device was tested for typical body‐worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. The users has to turn off the 5GHz WiFi in outdoor environment
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2015:03:09 15:33:48+08:00 Creator : Adobe Acrobat Pro 9.3.2 Modify Date : 2015:03:16 15:29:48+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2015:03:16 15:29:48+08:00 Creator Tool : Adobe Acrobat Pro 9.3.2 Format : application/pdf Document ID : uuid:df36cd02-728c-4c00-8749-765c482ee0b0 Instance ID : uuid:1590ff0d-fc44-4263-a3d5-57b878921f7b Producer : Adobe Acrobat Pro 9.3.2 Page Count : 11EXIF Metadata provided by EXIF.tools